From: Sean Paul <seanpaul@chromium.org>
To: linux-fbdev@vger.kernel.org
Subject: [PATCH 08/10] video: exynos_dp: Move hotplug into a workqueue
Date: Wed, 08 Aug 2012 03:54:22 +0000 [thread overview]
Message-ID: <1344398064-13563-9-git-send-email-seanpaul@chromium.org> (raw)
Move the hotplug related code from probe and resume into a workqueue.
This allows us to initialize the DP driver (and resume it) when there
is no monitor connected.
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Olof Johansson <olofj@chromium.org>
---
drivers/video/exynos/exynos_dp_core.c | 94 +++++++++++++++++----------------
drivers/video/exynos/exynos_dp_core.h | 1 +
2 files changed, 50 insertions(+), 45 deletions(-)
diff --git a/drivers/video/exynos/exynos_dp_core.c b/drivers/video/exynos/exynos_dp_core.c
index 2882362..68ad494 100644
--- a/drivers/video/exynos/exynos_dp_core.c
+++ b/drivers/video/exynos/exynos_dp_core.c
@@ -834,6 +834,45 @@ static irqreturn_t exynos_dp_irq_handler(int irq, void *arg)
return IRQ_HANDLED;
}
+static void exynos_dp_hotplug(struct work_struct *work)
+{
+ struct exynos_dp_device *dp;
+ int ret;
+
+ dp = container_of(work, struct exynos_dp_device, hotplug_work);
+
+ ret = exynos_dp_detect_hpd(dp);
+ if (ret) {
+ dev_err(dp->dev, "unable to detect hpd\n");
+ return;
+ }
+
+ ret = exynos_dp_handle_edid(dp);
+ if (ret) {
+ dev_err(dp->dev, "unable to handle edid\n");
+ return;
+ }
+
+ ret = exynos_dp_set_link_train(dp, dp->video_info->lane_count,
+ dp->video_info->link_rate);
+ if (ret) {
+ dev_err(dp->dev, "unable to do link train\n");
+ return;
+ }
+
+ exynos_dp_enable_scramble(dp, 1);
+ exynos_dp_enable_rx_to_enhanced_mode(dp, 1);
+ exynos_dp_enable_enhanced_mode(dp, 1);
+
+ exynos_dp_set_lane_count(dp, dp->video_info->lane_count);
+ exynos_dp_set_link_bandwidth(dp, dp->video_info->link_rate);
+
+ exynos_dp_init_video(dp);
+ ret = exynos_dp_config_video(dp, dp->video_info);
+ if (ret)
+ dev_err(&dp->dev, "unable to config video\n");
+}
+
static int __devinit exynos_dp_probe(struct platform_device *pdev)
{
struct resource *res;
@@ -886,6 +925,8 @@ static int __devinit exynos_dp_probe(struct platform_device *pdev)
goto err_clock;
}
+ INIT_WORK(&dp->hotplug_work, exynos_dp_hotplug);
+
ret = devm_request_irq(&pdev->dev, dp->irq, exynos_dp_irq_handler, 0,
"exynos-dp", dp);
if (ret) {
@@ -899,36 +940,8 @@ static int __devinit exynos_dp_probe(struct platform_device *pdev)
exynos_dp_init_dp(dp);
- ret = exynos_dp_detect_hpd(dp);
- if (ret) {
- dev_err(&pdev->dev, "unable to detect hpd\n");
- goto err_clock;
- }
-
- exynos_dp_handle_edid(dp);
-
- ret = exynos_dp_set_link_train(dp, dp->video_info->lane_count,
- dp->video_info->link_rate);
- if (ret) {
- dev_err(&pdev->dev, "unable to do link train\n");
- goto err_clock;
- }
-
- exynos_dp_enable_scramble(dp, 1);
- exynos_dp_enable_rx_to_enhanced_mode(dp, 1);
- exynos_dp_enable_enhanced_mode(dp, 1);
-
- exynos_dp_set_lane_count(dp, dp->video_info->lane_count);
- exynos_dp_set_link_bandwidth(dp, dp->video_info->link_rate);
-
- exynos_dp_init_video(dp);
- ret = exynos_dp_config_video(dp, dp->video_info);
- if (ret) {
- dev_err(&pdev->dev, "unable to config video\n");
- goto err_clock;
- }
-
platform_set_drvdata(pdev, dp);
+ schedule_work(&dp->hotplug_work);
return 0;
@@ -943,6 +956,9 @@ static int __devexit exynos_dp_remove(struct platform_device *pdev)
struct exynos_dp_platdata *pdata = pdev->dev.platform_data;
struct exynos_dp_device *dp = platform_get_drvdata(pdev);
+ if (work_pending(&dp->hotplug_work))
+ flush_work_sync(&dp->hotplug_work);
+
if (pdata && pdata->phy_exit)
pdata->phy_exit();
@@ -959,6 +975,9 @@ static int exynos_dp_suspend(struct device *dev)
struct exynos_dp_platdata *pdata = pdev->dev.platform_data;
struct exynos_dp_device *dp = platform_get_drvdata(pdev);
+ if (work_pending(&dp->hotplug_work))
+ flush_work_sync(&dp->hotplug_work);
+
if (pdata && pdata->phy_exit)
pdata->phy_exit();
@@ -979,22 +998,7 @@ static int exynos_dp_resume(struct device *dev)
clk_enable(dp->clock);
exynos_dp_init_dp(dp);
-
- exynos_dp_detect_hpd(dp);
- exynos_dp_handle_edid(dp);
-
- exynos_dp_set_link_train(dp, dp->video_info->lane_count,
- dp->video_info->link_rate);
-
- exynos_dp_enable_scramble(dp, 1);
- exynos_dp_enable_rx_to_enhanced_mode(dp, 1);
- exynos_dp_enable_enhanced_mode(dp, 1);
-
- exynos_dp_set_lane_count(dp, dp->video_info->lane_count);
- exynos_dp_set_link_bandwidth(dp, dp->video_info->link_rate);
-
- exynos_dp_init_video(dp);
- exynos_dp_config_video(dp, dp->video_info);
+ schedule_work(&dp->hotplug_work);
return 0;
}
diff --git a/drivers/video/exynos/exynos_dp_core.h b/drivers/video/exynos/exynos_dp_core.h
index 6431c65..cf1010b 100644
--- a/drivers/video/exynos/exynos_dp_core.h
+++ b/drivers/video/exynos/exynos_dp_core.h
@@ -32,6 +32,7 @@ struct exynos_dp_device {
struct video_info *video_info;
struct link_train link_train;
+ struct work_struct hotplug_work;
};
/* exynos_dp_reg.c */
--
1.7.7.3
next reply other threads:[~2012-08-08 3:54 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-08 3:54 Sean Paul [this message]
2012-10-31 17:20 ` [PATCH 08/10] video: exynos_dp: Move hotplug into a workqueue Sean Paul
2012-11-01 0:36 ` Jingoo Han
2012-11-01 2:51 ` Jingoo Han
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1344398064-13563-9-git-send-email-seanpaul@chromium.org \
--to=seanpaul@chromium.org \
--cc=linux-fbdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).