From: Archit Taneja <archit@ti.com>
To: tomi.valkeinen@ti.com
Cc: linux-fbdev@vger.kernel.org, linux-omap@vger.kernel.org,
Archit Taneja <archit@ti.com>
Subject: [PATCH v2 00/13] OMAPDSS: Change way of passing timings from panel driver to interface
Date: Thu, 09 Aug 2012 11:55:59 +0000 [thread overview]
Message-ID: <1344512989-4071-1-git-send-email-archit@ti.com> (raw)
In-Reply-To: <1343817088-29645-1-git-send-email-archit@ti.com>
This is a follow up series. The orginal one can be seen here:
http://marc.info/?l=linux-omap&m\x134381744304672&w=2
Changes in v2:
- Removed misc fixes out of this set
- Not trying to optimize SDI when setting new timings, using the old strategy
- Added a function for setting size for DSI command mode panels
- Added a fix which ensures the manager sizes is correctly set for rotation in
command mode panels.
The tree/branch can be found here:
git://gitorious.org/~boddob/linux-omap-dss2/archit-dss2-clone.git pass_timings_interface_2
Archit Taneja (13):
OMAPDSS: DPI: Maintain our own timings field in driver data
OMAPDSS: DPI displays: Take care of panel timings in the driver
itself
OMAPDSS: DSI: Maintain own copy of timings in driver data
OMAPDSS: DSI: Add function to set panel size for command mode panels
OMAPDSS: DSI: Update manager timings on a manual update
OMAPDSS: HDMI: Use our own omap_video_timings field when setting
interface timings
OMAPDSS: HDMI: Add a get_timing function for HDMI interface
OMAPDSS: HDMI: Add locking for hdmi interface get/set timing
functions
OMAPDSS: SDI: Create a function to set timings
OMAPDSS: SDI: Maintain our own timings field in driver data
OMAPDSS: VENC: Split VENC into interface and panel driver
OMAPDSS: VENC: Maintain our own timings field in driver data
OMAPDSS: VENC: Add a get_timing function for VENC interface
drivers/video/omap2/displays/panel-acx565akm.c | 13 +-
drivers/video/omap2/displays/panel-generic-dpi.c | 6 +-
.../omap2/displays/panel-lgphilips-lb035q02.c | 2 +
.../omap2/displays/panel-nec-nl8048hl11-01b.c | 2 +
drivers/video/omap2/displays/panel-picodlp.c | 3 +
.../video/omap2/displays/panel-sharp-ls037v7dw01.c | 2 +
drivers/video/omap2/displays/panel-taal.c | 14 ++
drivers/video/omap2/displays/panel-tfp410.c | 5 +-
.../video/omap2/displays/panel-tpo-td043mtea1.c | 6 +-
drivers/video/omap2/dss/Makefile | 2 +-
drivers/video/omap2/dss/dpi.c | 12 +-
drivers/video/omap2/dss/dsi.c | 86 +++++---
drivers/video/omap2/dss/dss.h | 17 +-
drivers/video/omap2/dss/hdmi.c | 55 +++--
drivers/video/omap2/dss/hdmi_panel.c | 12 +-
drivers/video/omap2/dss/sdi.c | 20 +-
drivers/video/omap2/dss/venc.c | 233 ++++++--------------
drivers/video/omap2/dss/venc_panel.c | 231 +++++++++++++++++++
include/video/omapdss.h | 9 +-
19 files changed, 490 insertions(+), 240 deletions(-)
create mode 100644 drivers/video/omap2/dss/venc_panel.c
--
1.7.9.5
next prev parent reply other threads:[~2012-08-09 11:55 UTC|newest]
Thread overview: 61+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-01 10:43 [RFC 00/17] OMAPDSS: Change way of passing timings from panel driver to interface Archit Taneja
2012-08-01 10:43 ` [RFC 01/17] OMAPDSS: APPLY: Constify timings argument in dss_mgr_set_timings Archit Taneja
2012-08-01 10:43 ` [RFC 02/17] OMAPDSS: DPI: Remove omap_dss_device arguments in dpi_set_dsi_clk/dpi_set_dispc_clk Archit Taneja
2012-08-01 10:43 ` [RFC 03/17] OMAPDSS: HDMI: Remove omap_dss_device argument from hdmi_compute_pll Archit Taneja
2012-08-01 10:43 ` [RFC 04/17] OMAPDSS: DPI: Add locking for DPI interface Archit Taneja
2012-08-01 10:43 ` [RFC 05/17] OMAPDSS: DPI: Maintain our own timings field in driver data Archit Taneja
2012-08-01 10:43 ` [RFC 06/17] OMAPDSS: DPI displays: Take care of panel timings in the driver itself Archit Taneja
2012-08-01 10:43 ` [RFC 07/17] OMAPDSS: Displays: Add locking in generic DPI panel driver Archit Taneja
2012-08-01 10:43 ` [RFC 08/17] OMAPDSS: DSI: Maintain own copy of timings in driver data Archit Taneja
2012-08-07 14:07 ` Tomi Valkeinen
2012-08-08 6:09 ` Archit Taneja
2012-08-08 6:15 ` Tomi Valkeinen
2012-08-08 6:41 ` Archit Taneja
2012-08-08 7:10 ` Tomi Valkeinen
2012-08-08 8:06 ` Archit Taneja
2012-08-01 10:43 ` [RFC 09/17] OMAPDSS: HDMI: Use our own omap_video_timings field when setting interface timings Archit Taneja
2012-08-01 10:43 ` [RFC 10/17] OMAPDSS: HDMI: Add a get_timing function for HDMI interface Archit Taneja
2012-08-01 10:43 ` [RFC 11/17] OMAPDSS: HDMI: Add locking for hdmi interface get/set timing functions Archit Taneja
2012-08-01 10:43 ` [RFC 12/17] OMAPDSS: SDI: Create a separate function for timing/clock configurations Archit Taneja
2012-08-01 10:43 ` [RFC 13/17] OMAPDSS: SDI: Create a function to set timings Archit Taneja
2012-08-07 14:20 ` Tomi Valkeinen
2012-08-08 6:10 ` Archit Taneja
2012-08-01 10:43 ` [RFC 14/17] OMAPDSS: SDI: Maintain our own timings field in driver data Archit Taneja
2012-08-01 10:43 ` [RFC 15/17] OMAPDSS: VENC: Split VENC into interface and panel driver Archit Taneja
2012-08-01 10:43 ` [RFC 16/17] OMAPDSS: VENC: Maintain our own timings field in driver data Archit Taneja
2012-08-01 10:43 ` [RFC 17/17] OMAPDSS: VENC: Add a get_timing function for VENC interface Archit Taneja
2012-08-01 10:47 ` [RFC 00/17] OMAPDSS: Change way of passing timings from panel driver to interface Archit Taneja
2012-08-07 14:32 ` Tomi Valkeinen
2012-08-08 6:17 ` Archit Taneja
2012-08-08 6:25 ` Tomi Valkeinen
2012-08-08 6:59 ` Archit Taneja
2012-08-08 7:27 ` Tomi Valkeinen
2012-08-08 8:11 ` Archit Taneja
2012-08-08 8:13 ` Tomi Valkeinen
2012-08-08 8:50 ` Archit Taneja
2012-08-08 8:48 ` Tomi Valkeinen
2012-08-08 9:36 ` Archit Taneja
2012-08-09 11:55 ` Archit Taneja [this message]
2012-08-09 11:56 ` [PATCH v2 01/13] OMAPDSS: DPI: Maintain our own timings field in driver data Archit Taneja
2012-08-09 11:56 ` [PATCH v2 02/13] OMAPDSS: DPI displays: Take care of panel timings in the driver itself Archit Taneja
2012-08-09 11:56 ` [PATCH v2 03/13] OMAPDSS: DSI: Maintain own copy of timings in driver data Archit Taneja
2012-08-09 11:56 ` [PATCH v2 04/13] OMAPDSS: DSI: Add function to set panel size for command mode panels Archit Taneja
2012-08-09 11:56 ` [PATCH v2 05/13] OMAPDSS: DSI: Update manager timings on a manual update Archit Taneja
2012-08-09 11:56 ` [PATCH v2 06/13] OMAPDSS: HDMI: Use our own omap_video_timings field when setting interface timings Archit Taneja
2012-08-09 11:56 ` [PATCH v2 07/13] OMAPDSS: HDMI: Add a get_timing function for HDMI interface Archit Taneja
2012-08-14 13:02 ` Tomi Valkeinen
2012-08-14 13:27 ` Archit Taneja
2012-08-14 14:10 ` Tomi Valkeinen
2012-08-14 17:28 ` Archit Taneja
2012-08-09 11:56 ` [PATCH v2 08/13] OMAPDSS: HDMI: Add locking for hdmi interface get/set timing functions Archit Taneja
2012-08-09 11:56 ` [PATCH v2 09/13] OMAPDSS: SDI: Create a function to set timings Archit Taneja
2012-08-14 13:44 ` Tomi Valkeinen
2012-08-14 17:08 ` Archit Taneja
2012-08-14 17:33 ` Tomi Valkeinen
2012-08-14 19:20 ` Archit Taneja
2012-08-15 6:43 ` Tomi Valkeinen
2012-08-14 19:26 ` Rob Clark
2012-08-09 11:56 ` [PATCH v2 10/13] OMAPDSS: SDI: Maintain our own timings field in driver data Archit Taneja
2012-08-09 11:56 ` [PATCH v2 11/13] OMAPDSS: VENC: Split VENC into interface and panel driver Archit Taneja
2012-08-09 11:56 ` [PATCH v2 12/13] OMAPDSS: VENC: Maintain our own timings field in driver data Archit Taneja
2012-08-09 11:56 ` [PATCH v2 13/13] OMAPDSS: VENC: Add a get_timing function for VENC interface Archit Taneja
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1344512989-4071-1-git-send-email-archit@ti.com \
--to=archit@ti.com \
--cc=linux-fbdev@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=tomi.valkeinen@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).