linux-fbdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Archit Taneja <archit@ti.com>
To: tomi.valkeinen@ti.com
Cc: linux-fbdev@vger.kernel.org, linux-omap@vger.kernel.org,
	Archit Taneja <archit@ti.com>
Subject: [PATCH v2 10/13] OMAPDSS: SDI: Maintain our own timings field in driver data
Date: Thu, 09 Aug 2012 11:56:39 +0000	[thread overview]
Message-ID: <1344512989-4071-11-git-send-email-archit@ti.com> (raw)
In-Reply-To: <1344512989-4071-1-git-send-email-archit@ti.com>

The SDI driver currently relies on the timings in omap_dss_device struct to
configure the DISPC accordingly. This makes the SDI interface driver dependent
on the omap_dss_device struct.

Make the SDI driver data maintain it's own timings field. The panel driver is
expected to call omapdss_sdi_set_timings() to set these timings before the panel
is enabled.

Make the SDI panel driver configure the new timings is the omap_dss_device
struct(dssdev->panel.timings). The SDI driver is responsible for maintaining
only it's own copy of timings.

Signed-off-by: Archit Taneja <archit@ti.com>
---
 drivers/video/omap2/displays/panel-acx565akm.c |    4 ++++
 drivers/video/omap2/dss/sdi.c                  |    5 +++--
 2 files changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/video/omap2/displays/panel-acx565akm.c b/drivers/video/omap2/displays/panel-acx565akm.c
index 11bdc88..77fe59f 100644
--- a/drivers/video/omap2/displays/panel-acx565akm.c
+++ b/drivers/video/omap2/displays/panel-acx565akm.c
@@ -600,6 +600,8 @@ static int acx_panel_power_on(struct omap_dss_device *dssdev)
 
 	mutex_lock(&md->mutex);
 
+	omapdss_sdi_set_timings(dssdev, &dssdev->panel.timings);
+
 	r = omapdss_sdi_display_enable(dssdev);
 	if (r) {
 		pr_err("%s sdi enable failed\n", __func__);
@@ -732,6 +734,8 @@ static void acx_panel_set_timings(struct omap_dss_device *dssdev,
 		struct omap_video_timings *timings)
 {
 	omapdss_sdi_set_timings(dssdev, timings);
+
+	dssdev->panel.timings = *timings;
 }
 
 static int acx_panel_check_timings(struct omap_dss_device *dssdev,
diff --git a/drivers/video/omap2/dss/sdi.c b/drivers/video/omap2/dss/sdi.c
index 0474962..243e96d 100644
--- a/drivers/video/omap2/dss/sdi.c
+++ b/drivers/video/omap2/dss/sdi.c
@@ -34,6 +34,7 @@ static struct {
 	struct regulator *vdds_sdi_reg;
 
 	struct dss_lcd_mgr_config mgr_config;
+	struct omap_video_timings timings;
 } sdi;
 
 static void sdi_config_lcd_manager(struct omap_dss_device *dssdev)
@@ -51,7 +52,7 @@ static void sdi_config_lcd_manager(struct omap_dss_device *dssdev)
 
 int omapdss_sdi_display_enable(struct omap_dss_device *dssdev)
 {
-	struct omap_video_timings *t = &dssdev->panel.timings;
+	struct omap_video_timings *t = &sdi.timings;
 	struct dss_clock_info dss_cinfo;
 	struct dispc_clock_info dispc_cinfo;
 	unsigned long pck;
@@ -151,7 +152,7 @@ void omapdss_sdi_set_timings(struct omap_dss_device *dssdev,
 {
 	int r;
 
-	dssdev->panel.timings = *timings;
+	sdi.timings = *timings;
 
 	if (dssdev->state = OMAP_DSS_DISPLAY_ACTIVE) {
 		omapdss_sdi_display_disable(dssdev);
-- 
1.7.9.5


  parent reply	other threads:[~2012-08-09 11:56 UTC|newest]

Thread overview: 61+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-08-01 10:43 [RFC 00/17] OMAPDSS: Change way of passing timings from panel driver to interface Archit Taneja
2012-08-01 10:43 ` [RFC 01/17] OMAPDSS: APPLY: Constify timings argument in dss_mgr_set_timings Archit Taneja
2012-08-01 10:43 ` [RFC 02/17] OMAPDSS: DPI: Remove omap_dss_device arguments in dpi_set_dsi_clk/dpi_set_dispc_clk Archit Taneja
2012-08-01 10:43 ` [RFC 03/17] OMAPDSS: HDMI: Remove omap_dss_device argument from hdmi_compute_pll Archit Taneja
2012-08-01 10:43 ` [RFC 04/17] OMAPDSS: DPI: Add locking for DPI interface Archit Taneja
2012-08-01 10:43 ` [RFC 05/17] OMAPDSS: DPI: Maintain our own timings field in driver data Archit Taneja
2012-08-01 10:43 ` [RFC 06/17] OMAPDSS: DPI displays: Take care of panel timings in the driver itself Archit Taneja
2012-08-01 10:43 ` [RFC 07/17] OMAPDSS: Displays: Add locking in generic DPI panel driver Archit Taneja
2012-08-01 10:43 ` [RFC 08/17] OMAPDSS: DSI: Maintain own copy of timings in driver data Archit Taneja
2012-08-07 14:07   ` Tomi Valkeinen
2012-08-08  6:09     ` Archit Taneja
2012-08-08  6:15       ` Tomi Valkeinen
2012-08-08  6:41         ` Archit Taneja
2012-08-08  7:10           ` Tomi Valkeinen
2012-08-08  8:06             ` Archit Taneja
2012-08-01 10:43 ` [RFC 09/17] OMAPDSS: HDMI: Use our own omap_video_timings field when setting interface timings Archit Taneja
2012-08-01 10:43 ` [RFC 10/17] OMAPDSS: HDMI: Add a get_timing function for HDMI interface Archit Taneja
2012-08-01 10:43 ` [RFC 11/17] OMAPDSS: HDMI: Add locking for hdmi interface get/set timing functions Archit Taneja
2012-08-01 10:43 ` [RFC 12/17] OMAPDSS: SDI: Create a separate function for timing/clock configurations Archit Taneja
2012-08-01 10:43 ` [RFC 13/17] OMAPDSS: SDI: Create a function to set timings Archit Taneja
2012-08-07 14:20   ` Tomi Valkeinen
2012-08-08  6:10     ` Archit Taneja
2012-08-01 10:43 ` [RFC 14/17] OMAPDSS: SDI: Maintain our own timings field in driver data Archit Taneja
2012-08-01 10:43 ` [RFC 15/17] OMAPDSS: VENC: Split VENC into interface and panel driver Archit Taneja
2012-08-01 10:43 ` [RFC 16/17] OMAPDSS: VENC: Maintain our own timings field in driver data Archit Taneja
2012-08-01 10:43 ` [RFC 17/17] OMAPDSS: VENC: Add a get_timing function for VENC interface Archit Taneja
2012-08-01 10:47 ` [RFC 00/17] OMAPDSS: Change way of passing timings from panel driver to interface Archit Taneja
2012-08-07 14:32 ` Tomi Valkeinen
2012-08-08  6:17   ` Archit Taneja
2012-08-08  6:25     ` Tomi Valkeinen
2012-08-08  6:59       ` Archit Taneja
2012-08-08  7:27         ` Tomi Valkeinen
2012-08-08  8:11           ` Archit Taneja
2012-08-08  8:13             ` Tomi Valkeinen
2012-08-08  8:50               ` Archit Taneja
2012-08-08  8:48                 ` Tomi Valkeinen
2012-08-08  9:36                   ` Archit Taneja
2012-08-09 11:55 ` [PATCH v2 00/13] " Archit Taneja
2012-08-09 11:56   ` [PATCH v2 01/13] OMAPDSS: DPI: Maintain our own timings field in driver data Archit Taneja
2012-08-09 11:56   ` [PATCH v2 02/13] OMAPDSS: DPI displays: Take care of panel timings in the driver itself Archit Taneja
2012-08-09 11:56   ` [PATCH v2 03/13] OMAPDSS: DSI: Maintain own copy of timings in driver data Archit Taneja
2012-08-09 11:56   ` [PATCH v2 04/13] OMAPDSS: DSI: Add function to set panel size for command mode panels Archit Taneja
2012-08-09 11:56   ` [PATCH v2 05/13] OMAPDSS: DSI: Update manager timings on a manual update Archit Taneja
2012-08-09 11:56   ` [PATCH v2 06/13] OMAPDSS: HDMI: Use our own omap_video_timings field when setting interface timings Archit Taneja
2012-08-09 11:56   ` [PATCH v2 07/13] OMAPDSS: HDMI: Add a get_timing function for HDMI interface Archit Taneja
2012-08-14 13:02     ` Tomi Valkeinen
2012-08-14 13:27       ` Archit Taneja
2012-08-14 14:10         ` Tomi Valkeinen
2012-08-14 17:28           ` Archit Taneja
2012-08-09 11:56   ` [PATCH v2 08/13] OMAPDSS: HDMI: Add locking for hdmi interface get/set timing functions Archit Taneja
2012-08-09 11:56   ` [PATCH v2 09/13] OMAPDSS: SDI: Create a function to set timings Archit Taneja
2012-08-14 13:44     ` Tomi Valkeinen
2012-08-14 17:08       ` Archit Taneja
2012-08-14 17:33         ` Tomi Valkeinen
2012-08-14 19:20           ` Archit Taneja
2012-08-15  6:43             ` Tomi Valkeinen
2012-08-14 19:26         ` Rob Clark
2012-08-09 11:56   ` Archit Taneja [this message]
2012-08-09 11:56   ` [PATCH v2 11/13] OMAPDSS: VENC: Split VENC into interface and panel driver Archit Taneja
2012-08-09 11:56   ` [PATCH v2 12/13] OMAPDSS: VENC: Maintain our own timings field in driver data Archit Taneja
2012-08-09 11:56   ` [PATCH v2 13/13] OMAPDSS: VENC: Add a get_timing function for VENC interface Archit Taneja

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1344512989-4071-11-git-send-email-archit@ti.com \
    --to=archit@ti.com \
    --cc=linux-fbdev@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=tomi.valkeinen@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).