linux-fbdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Archit Taneja <archit@ti.com>
To: tomi.valkeinen@ti.com
Cc: linux-fbdev@vger.kernel.org, linux-omap@vger.kernel.org,
	Archit Taneja <archit@ti.com>
Subject: [PATCH v2 05/13] OMAPDSS: DSI: Update manager timings on a manual update
Date: Thu, 09 Aug 2012 11:56:21 +0000	[thread overview]
Message-ID: <1344512989-4071-6-git-send-email-archit@ti.com> (raw)
In-Reply-To: <1344512989-4071-1-git-send-email-archit@ti.com>

During a command mode update using DISPC video port, we may need to swap the
connected overlay manager's width and height when 90 or 270 degree rotation is
done via the panel by changing it's address mode.

Call dss_mgr_set_timings() in update_screen_dispc() before starting the manager
update. The new manager size is updated in the 'timings' field of DSI driver's
private data via omapdss_dsi_set_size(). A panel driver is expected to call this
when performing rotation.

Signed-off-by: Archit Taneja <archit@ti.com>
---
 drivers/video/omap2/dss/dsi.c |    9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index eb364d4..6e1c74b 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -4180,8 +4180,7 @@ void dsi_disable_video_output(struct omap_dss_device *dssdev, int channel)
 }
 EXPORT_SYMBOL(dsi_disable_video_output);
 
-static void dsi_update_screen_dispc(struct omap_dss_device *dssdev,
-		u16 w, u16 h)
+static void dsi_update_screen_dispc(struct omap_dss_device *dssdev)
 {
 	struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
 	struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
@@ -4195,6 +4194,8 @@ static void dsi_update_screen_dispc(struct omap_dss_device *dssdev,
 	int r;
 	const unsigned channel = dsi->update_channel;
 	const unsigned line_buf_size = dsi_get_line_buf_size(dsidev);
+	u16 w = dsi->timings.x_res;
+	u16 h = dsi->timings.y_res;
 
 	DSSDBG("dsi_update_screen_dispc(%dx%d)\n", w, h);
 
@@ -4244,6 +4245,8 @@ static void dsi_update_screen_dispc(struct omap_dss_device *dssdev,
 		msecs_to_jiffies(250));
 	BUG_ON(r = 0);
 
+	dss_mgr_set_timings(dssdev->manager, &dsi->timings);
+
 	dss_mgr_start_update(dssdev->manager);
 
 	if (dsi->te_enabled) {
@@ -4337,7 +4340,7 @@ int omap_dsi_update(struct omap_dss_device *dssdev, int channel,
 	dsi->update_bytes = dw * dh *
 		dsi_get_pixel_size(dssdev->panel.dsi_pix_fmt) / 8;
 #endif
-	dsi_update_screen_dispc(dssdev, dw, dh);
+	dsi_update_screen_dispc(dssdev);
 
 	return 0;
 }
-- 
1.7.9.5


  parent reply	other threads:[~2012-08-09 11:56 UTC|newest]

Thread overview: 61+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-08-01 10:43 [RFC 00/17] OMAPDSS: Change way of passing timings from panel driver to interface Archit Taneja
2012-08-01 10:43 ` [RFC 01/17] OMAPDSS: APPLY: Constify timings argument in dss_mgr_set_timings Archit Taneja
2012-08-01 10:43 ` [RFC 02/17] OMAPDSS: DPI: Remove omap_dss_device arguments in dpi_set_dsi_clk/dpi_set_dispc_clk Archit Taneja
2012-08-01 10:43 ` [RFC 03/17] OMAPDSS: HDMI: Remove omap_dss_device argument from hdmi_compute_pll Archit Taneja
2012-08-01 10:43 ` [RFC 04/17] OMAPDSS: DPI: Add locking for DPI interface Archit Taneja
2012-08-01 10:43 ` [RFC 05/17] OMAPDSS: DPI: Maintain our own timings field in driver data Archit Taneja
2012-08-01 10:43 ` [RFC 06/17] OMAPDSS: DPI displays: Take care of panel timings in the driver itself Archit Taneja
2012-08-01 10:43 ` [RFC 07/17] OMAPDSS: Displays: Add locking in generic DPI panel driver Archit Taneja
2012-08-01 10:43 ` [RFC 08/17] OMAPDSS: DSI: Maintain own copy of timings in driver data Archit Taneja
2012-08-07 14:07   ` Tomi Valkeinen
2012-08-08  6:09     ` Archit Taneja
2012-08-08  6:15       ` Tomi Valkeinen
2012-08-08  6:41         ` Archit Taneja
2012-08-08  7:10           ` Tomi Valkeinen
2012-08-08  8:06             ` Archit Taneja
2012-08-01 10:43 ` [RFC 09/17] OMAPDSS: HDMI: Use our own omap_video_timings field when setting interface timings Archit Taneja
2012-08-01 10:43 ` [RFC 10/17] OMAPDSS: HDMI: Add a get_timing function for HDMI interface Archit Taneja
2012-08-01 10:43 ` [RFC 11/17] OMAPDSS: HDMI: Add locking for hdmi interface get/set timing functions Archit Taneja
2012-08-01 10:43 ` [RFC 12/17] OMAPDSS: SDI: Create a separate function for timing/clock configurations Archit Taneja
2012-08-01 10:43 ` [RFC 13/17] OMAPDSS: SDI: Create a function to set timings Archit Taneja
2012-08-07 14:20   ` Tomi Valkeinen
2012-08-08  6:10     ` Archit Taneja
2012-08-01 10:43 ` [RFC 14/17] OMAPDSS: SDI: Maintain our own timings field in driver data Archit Taneja
2012-08-01 10:43 ` [RFC 15/17] OMAPDSS: VENC: Split VENC into interface and panel driver Archit Taneja
2012-08-01 10:43 ` [RFC 16/17] OMAPDSS: VENC: Maintain our own timings field in driver data Archit Taneja
2012-08-01 10:43 ` [RFC 17/17] OMAPDSS: VENC: Add a get_timing function for VENC interface Archit Taneja
2012-08-01 10:47 ` [RFC 00/17] OMAPDSS: Change way of passing timings from panel driver to interface Archit Taneja
2012-08-07 14:32 ` Tomi Valkeinen
2012-08-08  6:17   ` Archit Taneja
2012-08-08  6:25     ` Tomi Valkeinen
2012-08-08  6:59       ` Archit Taneja
2012-08-08  7:27         ` Tomi Valkeinen
2012-08-08  8:11           ` Archit Taneja
2012-08-08  8:13             ` Tomi Valkeinen
2012-08-08  8:50               ` Archit Taneja
2012-08-08  8:48                 ` Tomi Valkeinen
2012-08-08  9:36                   ` Archit Taneja
2012-08-09 11:55 ` [PATCH v2 00/13] " Archit Taneja
2012-08-09 11:56   ` [PATCH v2 01/13] OMAPDSS: DPI: Maintain our own timings field in driver data Archit Taneja
2012-08-09 11:56   ` [PATCH v2 02/13] OMAPDSS: DPI displays: Take care of panel timings in the driver itself Archit Taneja
2012-08-09 11:56   ` [PATCH v2 03/13] OMAPDSS: DSI: Maintain own copy of timings in driver data Archit Taneja
2012-08-09 11:56   ` [PATCH v2 04/13] OMAPDSS: DSI: Add function to set panel size for command mode panels Archit Taneja
2012-08-09 11:56   ` Archit Taneja [this message]
2012-08-09 11:56   ` [PATCH v2 06/13] OMAPDSS: HDMI: Use our own omap_video_timings field when setting interface timings Archit Taneja
2012-08-09 11:56   ` [PATCH v2 07/13] OMAPDSS: HDMI: Add a get_timing function for HDMI interface Archit Taneja
2012-08-14 13:02     ` Tomi Valkeinen
2012-08-14 13:27       ` Archit Taneja
2012-08-14 14:10         ` Tomi Valkeinen
2012-08-14 17:28           ` Archit Taneja
2012-08-09 11:56   ` [PATCH v2 08/13] OMAPDSS: HDMI: Add locking for hdmi interface get/set timing functions Archit Taneja
2012-08-09 11:56   ` [PATCH v2 09/13] OMAPDSS: SDI: Create a function to set timings Archit Taneja
2012-08-14 13:44     ` Tomi Valkeinen
2012-08-14 17:08       ` Archit Taneja
2012-08-14 17:33         ` Tomi Valkeinen
2012-08-14 19:20           ` Archit Taneja
2012-08-15  6:43             ` Tomi Valkeinen
2012-08-14 19:26         ` Rob Clark
2012-08-09 11:56   ` [PATCH v2 10/13] OMAPDSS: SDI: Maintain our own timings field in driver data Archit Taneja
2012-08-09 11:56   ` [PATCH v2 11/13] OMAPDSS: VENC: Split VENC into interface and panel driver Archit Taneja
2012-08-09 11:56   ` [PATCH v2 12/13] OMAPDSS: VENC: Maintain our own timings field in driver data Archit Taneja
2012-08-09 11:56   ` [PATCH v2 13/13] OMAPDSS: VENC: Add a get_timing function for VENC interface Archit Taneja

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1344512989-4071-6-git-send-email-archit@ti.com \
    --to=archit@ti.com \
    --cc=linux-fbdev@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=tomi.valkeinen@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).