From: Archit Taneja <archit@ti.com>
To: tomi.valkeinen@ti.com
Cc: rob@ti.com, linux-omap@vger.kernel.org,
linux-fbdev@vger.kernel.org, Archit Taneja <archit@ti.com>
Subject: [PATCH v2 17/23] OMAPDSS: HDMI: Pass omap_dss_output within the driver
Date: Thu, 30 Aug 2012 11:52:39 +0000 [thread overview]
Message-ID: <1346326845-16583-18-git-send-email-archit@ti.com> (raw)
In-Reply-To: <1346326845-16583-1-git-send-email-archit@ti.com>
When a panel driver calls a HDMI function, it passes the omap_dss_device
pointer, this pointer currently propagates within the HDMI driver to configure
the interface.
Extract the omap_dss_output pointer from omap_dss_device received from the panel
driver, pass the output pointer to HDMI functions local to the driver to
configure the interface, these functions no longer need omap_dss_device since
the driver now maintains a copy of output parameters.
Replace dssdev->manager references with out->manager references as only these
will be valid later.
With the addition of outputs. There is a possibility that an omap_dss_device
isn't connected to an output, or a manager isn't connected to an output yet.
Ensure that the HDMI interface functions proceed only if the output is non NULL.
Signed-off-by: Archit Taneja <archit@ti.com>
---
drivers/video/omap2/dss/hdmi.c | 40 ++++++++++++++++++++++++----------------
1 file changed, 24 insertions(+), 16 deletions(-)
diff --git a/drivers/video/omap2/dss/hdmi.c b/drivers/video/omap2/dss/hdmi.c
index d93954d..3c89904 100644
--- a/drivers/video/omap2/dss/hdmi.c
+++ b/drivers/video/omap2/dss/hdmi.c
@@ -407,9 +407,10 @@ unsigned long hdmi_get_pixel_clock(void)
return hdmi.ip_data.cfg.timings.pixel_clock * 1000;
}
-static void hdmi_compute_pll(struct omap_dss_device *dssdev, int phy,
+static void hdmi_compute_pll(struct omap_dss_output *out, int phy,
struct hdmi_pll_info *pi)
{
+ struct omap_dss_device *dssdev = out->device;
unsigned long clkin, refclk;
u32 mf;
@@ -458,7 +459,7 @@ static void hdmi_compute_pll(struct omap_dss_device *dssdev, int phy,
DSSDBG("range = %d sd = %d\n", pi->dcofreq, pi->regsd);
}
-static int hdmi_power_on(struct omap_dss_device *dssdev)
+static int hdmi_power_on(struct omap_dss_output *out)
{
int r;
struct omap_video_timings *p;
@@ -468,7 +469,7 @@ static int hdmi_power_on(struct omap_dss_device *dssdev)
if (r)
return r;
- dss_mgr_disable(dssdev->manager);
+ dss_mgr_disable(out->manager);
p = &hdmi.ip_data.cfg.timings;
@@ -476,7 +477,7 @@ static int hdmi_power_on(struct omap_dss_device *dssdev)
phy = p->pixel_clock;
- hdmi_compute_pll(dssdev, phy, &hdmi.ip_data.pll_data);
+ hdmi_compute_pll(out, phy, &hdmi.ip_data.pll_data);
hdmi.ip_data.ops->video_disable(&hdmi.ip_data);
@@ -504,19 +505,19 @@ static int hdmi_power_on(struct omap_dss_device *dssdev)
* dynamically by user. This can be moved to single location , say
* Boardfile.
*/
- dss_select_dispc_clk_source(dssdev->clocks.dispc.dispc_fclk_src);
+ dss_select_dispc_clk_source(out->device->clocks.dispc.dispc_fclk_src);
/* bypass TV gamma table */
dispc_enable_gamma_table(0);
/* tv size */
- dss_mgr_set_timings(dssdev->manager, p);
+ dss_mgr_set_timings(out->manager, p);
r = hdmi.ip_data.ops->video_enable(&hdmi.ip_data);
if (r)
goto err_vid_enable;
- r = dss_mgr_enable(dssdev->manager);
+ r = dss_mgr_enable(out->manager);
if (r)
goto err_mgr_enable;
@@ -533,9 +534,9 @@ err:
return -EIO;
}
-static void hdmi_power_off(struct omap_dss_device *dssdev)
+static void hdmi_power_off(struct omap_dss_output *out)
{
- dss_mgr_disable(dssdev->manager);
+ dss_mgr_disable(out->manager);
hdmi.ip_data.ops->video_disable(&hdmi.ip_data);
hdmi.ip_data.ops->phy_disable(&hdmi.ip_data);
@@ -560,9 +561,13 @@ int omapdss_hdmi_display_check_timing(struct omap_dss_device *dssdev,
void omapdss_hdmi_display_set_timing(struct omap_dss_device *dssdev,
struct omap_video_timings *timings)
{
+ struct omap_dss_output *out = dssdev->output;
struct hdmi_cm cm;
const struct hdmi_config *t;
+ if (out = NULL)
+ return;
+
mutex_lock(&hdmi.lock);
cm = hdmi_get_code(timings);
@@ -575,13 +580,13 @@ void omapdss_hdmi_display_set_timing(struct omap_dss_device *dssdev,
if (dssdev->state = OMAP_DSS_DISPLAY_ACTIVE) {
int r;
- hdmi_power_off(dssdev);
+ hdmi_power_off(out);
- r = hdmi_power_on(dssdev);
+ r = hdmi_power_on(out);
if (r)
DSSERR("failed to power on device\n");
} else {
- dss_mgr_set_timings(dssdev->manager, &t->timings);
+ dss_mgr_set_timings(out->manager, &t->timings);
}
mutex_unlock(&hdmi.lock);
@@ -640,14 +645,15 @@ bool omapdss_hdmi_detect(void)
int omapdss_hdmi_display_enable(struct omap_dss_device *dssdev)
{
struct omap_dss_hdmi_data *priv = dssdev->data;
+ struct omap_dss_output *out = dssdev->output;
int r = 0;
DSSDBG("ENTER hdmi_display_enable\n");
mutex_lock(&hdmi.lock);
- if (dssdev->manager = NULL) {
- DSSERR("failed to enable display: no manager\n");
+ if (out = NULL || out->manager = NULL) {
+ DSSERR("failed to enable display: no output/manager\n");
r = -ENODEV;
goto err0;
}
@@ -668,7 +674,7 @@ int omapdss_hdmi_display_enable(struct omap_dss_device *dssdev)
}
}
- r = hdmi_power_on(dssdev);
+ r = hdmi_power_on(out);
if (r) {
DSSERR("failed to power on device\n");
goto err2;
@@ -689,11 +695,13 @@ err0:
void omapdss_hdmi_display_disable(struct omap_dss_device *dssdev)
{
+ struct omap_dss_output *out = dssdev->output;
+
DSSDBG("Enter hdmi_display_disable\n");
mutex_lock(&hdmi.lock);
- hdmi_power_off(dssdev);
+ hdmi_power_off(out);
if (dssdev->platform_disable)
dssdev->platform_disable(dssdev);
--
1.7.9.5
next prev parent reply other threads:[~2012-08-30 11:52 UTC|newest]
Thread overview: 74+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-21 6:10 [PATCH 00/23] OMAPDSS: Create output entities Archit Taneja
2012-08-21 6:10 ` [PATCH 01/23] OMAPDSS: outputs: Create a new entity called outputs Archit Taneja
2012-08-24 12:41 ` Tomi Valkeinen
2012-08-24 12:53 ` Archit Taneja
2012-08-29 10:32 ` Tomi Valkeinen
2012-08-29 10:58 ` Archit Taneja
2012-08-21 6:10 ` [PATCH 02/23] OMAPDSS: outputs: Create and initialize output instances Archit Taneja
2012-08-24 13:14 ` Tomi Valkeinen
2012-08-27 6:31 ` Archit Taneja
2012-08-27 6:44 ` Tomi Valkeinen
2012-08-21 6:10 ` [PATCH 03/23] OMAPDSS: output: Add set/unset device ops for omap_dss_output Archit Taneja
2012-08-21 6:10 ` [PATCH 04/23] OMAPDSS: APPLY: Add manager set/unset output ops for omap_overlay_manager Archit Taneja
2012-08-21 6:10 ` [PATCH 05/23] OMAPDSS: Remove manager->device references Archit Taneja
2012-08-21 6:10 ` [PATCH 06/23] OMAP_VOUT: " Archit Taneja
2012-08-21 6:10 ` [PATCH 07/23] OMAPFB: remove " Archit Taneja
2012-08-21 6:10 ` [PATCH 08/23] OMAPDRM: Remove " Archit Taneja
2012-08-21 6:10 ` [PATCH 09/23] OMAPDSS: Create links between managers, outputs and devices Archit Taneja
2012-08-21 6:10 ` [PATCH 10/23] OMAPDSS: DPI: Pass outputs from panel driver to DPI interface driver Archit Taneja
2012-08-21 6:10 ` [PATCH 11/23] OMAPDSS: DSI: Remove dsi_pdev_map global struct Archit Taneja
2012-08-21 6:10 ` [PATCH 12/23] OMAPDSS: DSI: Pass outputs from panel driver to DSI interface driver Archit Taneja
2012-08-21 6:10 ` [PATCH 13/23] OMAPDSS: SDI: Pass outputs from panel driver to SDI " Archit Taneja
2012-08-21 6:10 ` [PATCH 14/23] OMAPDSS: RFBI: Pass outputs from panel driver to RFBI " Archit Taneja
2012-08-21 6:10 ` [PATCH 15/23] OMAPDSS: RFBI: Add output pointers as arguments to all exported functions Archit Taneja
2012-08-21 6:10 ` [PATCH 16/23] OMAPDSS: VENC: Pass outputs from panel driver to VENC interface driver Archit Taneja
2012-08-21 6:10 ` [PATCH 17/23] OMAPDSS: HDMI: Pass outputs from panel driver to HDMI " Archit Taneja
2012-08-21 6:10 ` [PATCH 18/23] OMAPDSS: HDMI: Add output pointers as arguments to all functions used by hdmi panel dr Archit Taneja
2012-08-21 6:10 ` [PATCH 19/23] OMAPDSS/OMAPFB: Change dssdev->manager references Archit Taneja
2012-08-21 6:10 ` [PATCH 20/23] OMAPDSS: MANAGER: Update display sysfs store Archit Taneja
2012-08-21 6:10 ` [PATCH 21/23] OMAPDSS: MANAGER: Get device via output Archit Taneja
2012-08-21 6:10 ` [PATCH 22/23] OMAPDSS: APPLY: Remove omap_dss_device references from dss_ovl_enable/disable Archit Taneja
2012-08-21 6:10 ` [PATCH 23/23] OMAPDSS: Remove old way of setting manager and device links Archit Taneja
2012-08-30 11:52 ` [PATCH v2 00/23] OMAPDSS: Create output entities Archit Taneja
2012-08-30 11:52 ` [PATCH v2 01/23] OMAPDSS: outputs: Create a new entity called outputs Archit Taneja
2012-08-30 11:52 ` [PATCH v2 02/23] OMAPDSS: outputs: Create and register output instances Archit Taneja
2012-08-31 11:57 ` Tomi Valkeinen
2012-08-31 12:15 ` Archit Taneja
2012-08-30 11:52 ` [PATCH v2 03/23] OMAPDSS: output: Add set/unset device ops for omap_dss_output Archit Taneja
2012-08-31 12:03 ` Tomi Valkeinen
2012-08-31 12:36 ` Archit Taneja
2012-08-31 12:28 ` Tomi Valkeinen
2012-08-30 11:52 ` [PATCH v2 04/23] OMAPDSS: APPLY: Add manager set/unset output ops for omap_overlay_manager Archit Taneja
2012-08-30 11:52 ` [PATCH v2 05/23] OMAPDSS: Remove manager->device references Archit Taneja
2012-08-30 11:52 ` [PATCH v2 06/23] OMAP_VOUT: " Archit Taneja
2012-08-31 12:11 ` Tomi Valkeinen
2012-08-31 12:46 ` Archit Taneja
2012-08-30 11:52 ` [PATCH v2 07/23] OMAPFB: remove " Archit Taneja
2012-08-30 11:52 ` [PATCH v2 08/23] OMAPDRM: Remove " Archit Taneja
2012-08-30 11:52 ` [PATCH v2 09/23] OMAPDSS: Create links between managers, outputs and devices Archit Taneja
2012-08-31 14:10 ` Tomi Valkeinen
2012-08-31 14:36 ` Archit Taneja
2012-08-31 14:45 ` Tomi Valkeinen
2012-08-31 15:08 ` Tomi Valkeinen
2012-09-03 9:38 ` Archit Taneja
2012-09-03 9:35 ` Tomi Valkeinen
2012-08-30 11:52 ` [PATCH v2 10/23] OMAPDSS: DPI: Pass omap_dss_output within the driver Archit Taneja
2012-08-31 13:48 ` Tomi Valkeinen
2012-08-31 13:59 ` Archit Taneja
2012-08-30 11:52 ` [PATCH v2 11/23] OMAPDSS: DSI: Remove dsi_pdev_map global struct Archit Taneja
2012-08-30 11:52 ` [PATCH v2 12/23] OMAPDSS: DSI: Pass omap_dss_output within the driver Archit Taneja
2012-08-30 11:52 ` [PATCH v2 13/23] OMAPDSS: SDI: " Archit Taneja
2012-08-30 11:52 ` [PATCH v2 14/23] OMAPDSS: RFBI: " Archit Taneja
2012-08-30 11:52 ` [PATCH v2 15/23] OMAPDSS: RFBI: Add dssdev pointers as arguments to all exported functions Archit Taneja
2012-08-31 14:20 ` Tomi Valkeinen
2012-08-31 14:42 ` Archit Taneja
2012-08-30 11:52 ` [PATCH v2 16/23] OMAPDSS: VENC: Pass omap_dss_output within the driver Archit Taneja
2012-08-30 11:52 ` Archit Taneja [this message]
2012-08-30 11:52 ` [PATCH v2 18/23] OMAPDSS: HDMI: Add dssdev pointer as an argument to all functions used by hdmi pane Archit Taneja
2012-08-30 11:52 ` [PATCH v2 19/23] OMAPDSS/OMAPFB: Change dssdev->manager references Archit Taneja
2012-08-30 11:52 ` [PATCH v2 20/23] OMAPDSS: MANAGER: Update display sysfs store Archit Taneja
2012-08-31 14:30 ` Tomi Valkeinen
2012-08-31 14:53 ` Archit Taneja
2012-08-30 11:52 ` [PATCH v2 21/23] OMAPDSS: MANAGER: Get device via output Archit Taneja
2012-08-30 11:52 ` [PATCH v2 22/23] OMAPDSS: APPLY: Remove omap_dss_device references from dss_ovl_enable/disable Archit Taneja
2012-08-30 11:52 ` [PATCH v2 23/23] OMAPDSS: Remove old way of setting manager and device links Archit Taneja
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1346326845-16583-18-git-send-email-archit@ti.com \
--to=archit@ti.com \
--cc=linux-fbdev@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=rob@ti.com \
--cc=tomi.valkeinen@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).