From: Chandrabhanu Mahapatra <cmahapatra@ti.com>
To: tomi.valkeinen@ti.com
Cc: linux-omap@vger.kernel.org, linux-fbdev@vger.kernel.org,
Chandrabhanu Mahapatra <cmahapatra@ti.com>
Subject: [PATCH] OMAPDSS: Cleanup DSSDBG with dynamic pr_debug function
Date: Tue, 25 Sep 2012 06:15:18 +0000 [thread overview]
Message-ID: <1348552998-6596-1-git-send-email-cmahapatra@ti.com> (raw)
The printk in DSSDBG function definition is replaced with dynamic debug enabled
pr_debug(). The use of dynamic debugging provides more flexiblity as each debug
statement can be enabled or disabled dynamically on basis of source filename,
line number, module name etc. by writing to a control file in debugfs
filesystem. For better undertsanding please refer to
Documentation/dynamic-debug-howto.txt.
The DSSDBGF() differs from DSSDBG() by providing function name. However,
function name, line number, module name and thread ID can be printed through
dynamic debug by setting appropiate flags 'f','l','m' and 't' in the debugfs
control file. So, DSSDBGF instances are replaced with DSSDBG.
Signed-off-by: Chandrabhanu Mahapatra <cmahapatra@ti.com>
---
drivers/video/omap2/dss/apply.c | 8 ++++----
drivers/video/omap2/dss/dsi.c | 12 ++++--------
drivers/video/omap2/dss/dss.h | 34 ++++++++--------------------------
3 files changed, 16 insertions(+), 38 deletions(-)
diff --git a/drivers/video/omap2/dss/apply.c b/drivers/video/omap2/dss/apply.c
index 6354bb8..cb86d94 100644
--- a/drivers/video/omap2/dss/apply.c
+++ b/drivers/video/omap2/dss/apply.c
@@ -559,7 +559,7 @@ static void dss_ovl_write_regs(struct omap_overlay *ovl)
struct mgr_priv_data *mp;
int r;
- DSSDBGF("%d", ovl->id);
+ DSSDBG("%d", ovl->id);
if (!op->enabled || !op->info_dirty)
return;
@@ -594,7 +594,7 @@ static void dss_ovl_write_regs_extra(struct omap_overlay *ovl)
struct ovl_priv_data *op = get_ovl_priv(ovl);
struct mgr_priv_data *mp;
- DSSDBGF("%d", ovl->id);
+ DSSDBG("%d", ovl->id);
if (!op->extra_info_dirty)
return;
@@ -618,7 +618,7 @@ static void dss_mgr_write_regs(struct omap_overlay_manager *mgr)
struct mgr_priv_data *mp = get_mgr_priv(mgr);
struct omap_overlay *ovl;
- DSSDBGF("%d", mgr->id);
+ DSSDBG("%d", mgr->id);
if (!mp->enabled)
return;
@@ -644,7 +644,7 @@ static void dss_mgr_write_regs_extra(struct omap_overlay_manager *mgr)
{
struct mgr_priv_data *mp = get_mgr_priv(mgr);
- DSSDBGF("%d", mgr->id);
+ DSSDBG("%d", mgr->id);
if (!mp->extra_info_dirty)
return;
diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index 8d815e3..8304cc6b 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -1525,8 +1525,6 @@ int dsi_pll_set_clock_div(struct platform_device *dsidev,
u8 regn_start, regn_end, regm_start, regm_end;
u8 regm_dispc_start, regm_dispc_end, regm_dsi_start, regm_dsi_end;
- DSSDBGF();
-
dsi->current_cinfo.clkin = cinfo->clkin;
dsi->current_cinfo.fint = cinfo->fint;
dsi->current_cinfo.clkin4ddr = cinfo->clkin4ddr;
@@ -2334,8 +2332,6 @@ static int dsi_cio_init(struct omap_dss_device *dssdev)
int r;
u32 l;
- DSSDBGF();
-
r = dss_dsi_enable_pads(dsi->module_id, dsi_get_lane_mask(dssdev));
if (r)
return r;
@@ -2686,7 +2682,7 @@ static void dsi_vc_initial_config(struct platform_device *dsidev, int channel)
{
u32 r;
- DSSDBGF("%d", channel);
+ DSSDBG("%d", channel);
r = dsi_read_reg(dsidev, DSI_VC_CTRL(channel));
@@ -2718,7 +2714,7 @@ static int dsi_vc_config_source(struct platform_device *dsidev, int channel,
if (dsi->vc[channel].source = source)
return 0;
- DSSDBGF("%d", channel);
+ DSSDBG("%d", channel);
dsi_sync_vc(dsidev, channel);
@@ -3475,7 +3471,7 @@ static int dsi_enter_ulps(struct platform_device *dsidev)
int r, i;
unsigned mask;
- DSSDBGF();
+ DSSDBG("");
WARN_ON(!dsi_bus_is_locked(dsidev));
@@ -4184,7 +4180,7 @@ int omapdss_dsi_set_clocks(struct omap_dss_device *dssdev,
unsigned long pck;
int r;
- DSSDBGF("ddr_clk %lu, lp_clk %lu", ddr_clk, lp_clk);
+ DSSDBG("ddr_clk %lu, lp_clk %lu", ddr_clk, lp_clk);
mutex_lock(&dsi->lock);
diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h
index 5e9fd769..3a2caab 100644
--- a/drivers/video/omap2/dss/dss.h
+++ b/drivers/video/omap2/dss/dss.h
@@ -29,38 +29,20 @@
#ifdef DEBUG
extern bool dss_debug;
-#ifdef DSS_SUBSYS_NAME
-#define DSSDBG(format, ...) \
- if (dss_debug) \
- printk(KERN_DEBUG "omapdss " DSS_SUBSYS_NAME ": " format, \
- ## __VA_ARGS__)
-#else
-#define DSSDBG(format, ...) \
- if (dss_debug) \
- printk(KERN_DEBUG "omapdss: " format, ## __VA_ARGS__)
#endif
-#ifdef DSS_SUBSYS_NAME
-#define DSSDBGF(format, ...) \
- if (dss_debug) \
- printk(KERN_DEBUG "omapdss " DSS_SUBSYS_NAME \
- ": %s(" format ")\n", \
- __func__, \
- ## __VA_ARGS__)
-#else
-#define DSSDBGF(format, ...) \
- if (dss_debug) \
- printk(KERN_DEBUG "omapdss: " \
- ": %s(" format ")\n", \
- __func__, \
- ## __VA_ARGS__)
+#ifdef pr_fmt
+#undef pr_fmt
#endif
-#else /* DEBUG */
-#define DSSDBG(format, ...)
-#define DSSDBGF(format, ...)
+#ifdef DSS_SUBSYS_NAME
+#define pr_fmt(fmt) DSS_SUBSYS_NAME ": " fmt
+#else
+#define pr_fmt(fmt) fmt
#endif
+#define DSSDBG(format, ...) \
+ pr_debug(format, ## __VA_ARGS__)
#ifdef DSS_SUBSYS_NAME
#define DSSERR(format, ...) \
--
1.7.10
next reply other threads:[~2012-09-25 6:15 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-09-25 6:15 Chandrabhanu Mahapatra [this message]
2012-09-25 6:24 ` [PATCH] OMAPDSS: Cleanup DSSDBG with dynamic pr_debug function Tomi Valkeinen
2012-09-25 9:42 ` Mahapatra, Chandrabhanu
2012-09-25 9:57 ` Tomi Valkeinen
2012-09-26 5:27 ` [PATCH V2 0/2] OMAPDSS: Enable dynamic debug printing Chandrabhanu Mahapatra
2012-09-26 5:27 ` [PATCH V2 1/2] OMAPDSS: Cleanup DSSDBG with dynamic pr_debug function Chandrabhanu Mahapatra
2012-09-26 5:28 ` [PATCH V2 2/2] OMAPDSS: Remove dss_debug variable Chandrabhanu Mahapatra
2012-09-26 14:29 ` [PATCH V2 0/2] OMAPDSS: Enable dynamic debug printing Tomi Valkeinen
2012-09-27 10:50 ` Mahapatra, Chandrabhanu
2012-09-27 11:01 ` Tomi Valkeinen
2012-09-28 10:35 ` [PATCH V3 0/3] " Chandrabhanu Mahapatra
2012-09-28 10:35 ` [PATCH V3 1/3] OMAPDSS: Move definition of DEBUG flag to Makefile Chandrabhanu Mahapatra
2012-09-28 10:35 ` [PATCH V3 2/3] OMAPDSS: Cleanup DSSDBG with dynamic pr_debug function Chandrabhanu Mahapatra
2012-09-28 11:22 ` Tomi Valkeinen
2012-09-28 11:42 ` Mahapatra, Chandrabhanu
2012-09-28 11:37 ` Tomi Valkeinen
2012-09-28 10:35 ` [PATCH V3 3/3] OMAPDSS: Remove dss_debug variable Chandrabhanu Mahapatra
2012-09-28 11:34 ` [PATCH V3 0/3] OMAPDSS: Enable dynamic debug printing Tomi Valkeinen
2012-09-28 12:23 ` Mahapatra, Chandrabhanu
2012-09-29 10:51 ` [PATCH V4 0/5] " Chandrabhanu Mahapatra
2012-09-29 10:51 ` [PATCH V4 1/5] OMAPDSS: Move definition of DEBUG flag to Makefile Chandrabhanu Mahapatra
2012-09-29 10:52 ` [PATCH V4 2/5] OMAPDSS: Create new debug config options Chandrabhanu Mahapatra
2012-09-29 15:27 ` Sumit Semwal
2012-10-01 7:51 ` [PATCH V5 " Chandrabhanu Mahapatra
2012-09-29 10:52 ` [PATCH V4 3/5] OMAPDSS: Cleanup DSSDBG with dynamic pr_debug function Chandrabhanu Mahapatra
2012-09-29 10:52 ` [PATCH V4 4/5] OMAPDSS: Replace multi part debug prints with pr_debug Chandrabhanu Mahapatra
2012-10-05 12:33 ` Tomi Valkeinen
2012-10-10 9:34 ` [PATCH V5 " Chandrabhanu Mahapatra
2012-09-29 10:52 ` [PATCH V4 5/5] OMAPDSS: Remove dss_debug variable Chandrabhanu Mahapatra
2012-10-05 12:46 ` [PATCH V4 0/5] OMAPDSS: Enable dynamic debug printing Tomi Valkeinen
2012-10-10 10:38 ` Sumit Semwal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1348552998-6596-1-git-send-email-cmahapatra@ti.com \
--to=cmahapatra@ti.com \
--cc=linux-fbdev@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=tomi.valkeinen@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).