From: Tomi Valkeinen <tomi.valkeinen@ti.com>
To: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: linux-omap@vger.kernel.org, linux-fbdev <linux-fbdev@vger.kernel.org>
Subject: [GIT PULL] OMAP DSS for v3.7
Date: Mon, 01 Oct 2012 19:45:14 +0000 [thread overview]
Message-ID: <1349120714.13060.8.camel@lappyti> (raw)
[-- Attachment #1: Type: text/plain, Size: 13965 bytes --]
Hi Florian,
Here are omapdss changes for 3.7 merge window.
There's something funny with the diff stat, though. I can see a few
changes there that I have not made, for example to
drivers/video/console/fbcon.c. I believe they come from my "Merge branch
'fbdev-for-linus' of git://github.com/schandinat/linux-2.6", although I
don't know why they show up in the diff stat.
Merge with v3.6 goes without conflicts, but there will be some conflicts
with OMAP platform stuff, at least according to linux-next reports.
Those conflicts are trivial, though.
Tomi
The following changes since commit 4cbe5a555fa58a79b6ecbb6c531b8bab0650778d:
Linux 3.6-rc4 (2012-09-01 10:39:58 -0700)
are available in the git repository at:
git://gitorious.org/linux-omap-dss2/linux.git tags/omapdss-for-3.7
for you to fetch changes up to 13b1ba7de8d0ecc42e4f9c002d5b0c1a48f05e58:
OMAPDSS: add missing include for string.h (2012-09-28 10:03:03 +0300)
----------------------------------------------------------------
Omapdss driver changes for the 3.7 merge window.
Notable changes:
* Basic writeback support for DISPC level. Writeback is not yet usable, though,
as we need higher level code to actually expose the writeback feature to
userspace.
* Rewriting the omapdss output drivers. We're trying to remove the hard links
between the omapdss and the panels, and this rewrite work moves us closer to
that goal.
* Cleanup and restructuring patches that have been made while working on device
tree support for omapdss. Device tree support is still some way ahead, but
these patches are good cleanups in themselves.
* Basic OMAP5 DSS support for DPI and DSI outputs.
* Workaround for the problem that GFX overlay's fifo is too small for high
resolution scenarios, causing underflows.
* Cleanups that remove dependencies to omap platform code.
----------------------------------------------------------------
Archit Taneja (70):
OMAPDSS: APPLY: Constify timings argument in dss_mgr_set_timings
OMAPDSS: DPI: Add locking for DPI interface
OMAPDSS: Displays: Add locking in generic DPI panel driver
OMAPDSS: DPI: Maintain our own timings field in driver data
OMAPDSS: DPI displays: Take care of panel timings in the driver itself
OMAPDSS: DSI: Maintain own copy of timings in driver data
OMAPDSS: DSI: Add function to set panel size for command mode panels
OMAPDSS: DSI: Update manager timings on a manual update
OMAPDSS: HDMI: Use our own omap_video_timings field when setting interface timings
OMAPDSS: HDMI: Add locking for hdmi interface set timing functions
OMAPDSS: SDI: Create a function to set timings
OMAPDSS: SDI: Maintain our own timings field in driver data
OMAPDSS: VENC: Split VENC into interface and panel driver
OMAPDSS: VENC: Maintain our own timings field in driver data
OMAPDSS: RFBI: Remove partial update support
OMAPDSS: RFBI: Add function to set panel size
OMAPDSS: DSI: Maintain copy of pixel format in driver data
OMAPDSS: RFBI: Maintain copy of pixel size in driver data
OMAPDSS: RFBI: Maintain copy of number of data lines in driver data
OMAPDSS: DPI: Maintain copy of number of data lines in driver data
OMAPDSS: SDI: Maintain copy of data pairs in driver data
OMAPDSS: DSI: Maintain copy of operation mode in driver data
OMAPDSS: DSI: Rename dsi_videomode_data to dsi_videomode_timings
OMAPDSS: DSI: Maintain copy of video mode timings in driver data
OMAPDSS: RFBI: Maitain copy of rfbi timings in driver data
OMAPDSS: VENC: Maintain copy of venc type in driver data
OMAPDSS: VENC: Maintian copy of video output polarity info in private data
OMAPFB: Clear framebuffers before they are registered
OMAPDSS: Add basic omap5 features to dss and dispc
OMAPDSS: DSI: Pass dsi platform device wherever possible
OMAPDSS: APPLY: Remove omap_dss_device references in wait_for_go functions
OMAPDSS: outputs: Create a new entity called outputs
OMAPDSS: outputs: Create and register output instances
OMAPDSS: output: Add set/unset device ops for omap_dss_output
OMAPDSS: APPLY: Add manager set/unset output ops for omap_overlay_manager
OMAPDSS: Remove manager->device references
OMAP_VOUT: Remove manager->device references
OMAPFB: remove manager->device references
OMAPDRM: Remove manager->device references
OMAPDSS: Create links between managers, outputs and devices
OMAPDSS: DPI: Replace dssdev->manager with dssdev->output->manager references
OMAPDSS: DSI: Remove dsi_pdev_map global struct
OMAPDSS: DSI: Replace dssdev->manager with dssdev->output->manager references
OMAPDSS: SDI: Replace dssdev->manager with dssdev->output->manager references
OMAPDSS: RFBI: Replace dssdev->manager with dssdev->output->manager references
OMAPDSS: VENC: Replace dssdev->manager with dssdev->output->manager references
OMAPDSS: HDMI: Replace dssdev->manager with dssdev->output->manager references
OMAPFB: Change dssdev->manager references
OMAPDSS: MANAGER: Update display sysfs store
OMAPDSS: OVERLAY/MANAGER: Get device via output
OMAPDSS: APPLY: Remove omap_dss_device references from dss_ovl_enable/disable
OMAPDSS: Remove old way of setting manager and device links
OMAPDSS: DISPC: Constify omap_overlay_info in dispc_ovl_setup()
OMAPDSS: DISPC: Simplify function names for setting pipeline input and output sizes
OMAPDSS: DISPC: Pass overlay caps as a parameter to dispc plane functions
OMAPDSS: OVERLAY: Add position and replication as overlay caps
OMAPDSS: DISPC: Make dispc_ovl_setup call dispc_ovl_setup_common
OMAPDSS: DISPC: Don't pass channel out when configuring overlays
OMAPDSS: DIPSC: Relax scaling limitations when in memory to memory mode
OMAPDSS: DISPC: Allow both upscaling and downscaling of chroma
OMAPDSS: DISPC: Add writeback register offsets and dss features structs
OMAPDSS: DISPC: Configure input and output sizes for writeback
OMAPDSS: DISPC: Downscale chroma if plane is writeback
OMAPDSS: DISPC: Don't set chroma resampling bit for writeback
OMAPDSS: DISPC: Add function to set channel in for writeback
OMAPDSS: DISPC: Configure overlay-like parameters in dispc_wb_setup
OMAPDSS: DISPC: Configure writeback specific parameters in dispc_wb_setup()
OMAPDSS: DISPC: Configure writeback FIFOs
OMAPDSS: DISPC: Add manager like functions for writeback
OMAPDSS: DISPC: Configure color conversion coefficients for writeback
Chandrabhanu Mahapatra (8):
OMAPDSS: DISPC: Cleanup cpu_is_xxxx checks
OMAPDSS: DSS: Remove redundant functions
OMAPDSS: DSS: Cleanup cpu_is_xxxx checks
ARM: OMAP: Disable venc for OMAP4
OMAPDSS: VENC: Remove cpu_is_xxxx checks
OMAPDSS: DPI: Remove cpu_is_xxxx checks
OMAPDSS: Correct DISPC_IRQ bit definitions for LCD3
OMAPDSS: DISPC: Add predecimation limit for TILER based rotations
Grazvydas Ignotas (1):
OMAPFB: fix framebuffer console colors
Jassi Brar (1):
OMAPDSS: DISPC: Use msleep instead of blocking mdelay
Raphaël Assénat (1):
OMAPDSS: Do not require a VDDS_DSI regulator on AM35xx
Ricardo Neri (2):
OMAPDSS: HDMI: Disable PLL properly in case of error at power_on
OMAPDSS: DISPC: Improvements to DIGIT sync signal selection
Tomi Valkeinen (53):
Merge output work from Archit
OMAPDSS: HDMI: fix initial HDMI enable
Merge tag 'v3.6-rc4'
OMAPDSS: HDMI: Move GPIO handling to HDMI driver
OMAPDSS: HDMI: Add delay to wait for 5V power
OMAP4: TWL: add vdda_hdmi_dac regulator supply
OMAPDSS: HDMI: use vdda_hdmi_dac
OMAPDSS: Add DSI fclk maximum to dss_features
OMAPDSS: DSI: calculate dsi clock
OMAP: 4430SDP: remove DSI clock config from board file
OMAPDSS: fix use of dssdev->caps
OMAPDSS: Taal: use devm_* functions
OMAPFB1: remove unnecessary includes
OMAPFB1: remove a non-used table
OMAPDSS: remove unnecessary includes
OMAPFB: clear framebuffers with CPU
OMAPDSS: VRAM: Remove clearing with sDMA
OMAPDSS: Taal: Reogranize for device tree
OMAPDSS: TFP410: use devm_gpio_request_one
OMAPDSS: split overlay sysfs code
OMAPDSS: split manager sysfs code
OMAPDSS: clean up dss_mgr_set_lcd_config
OMAPDSS: clean up dss_mgr_set_timings
Revert "OMAPDSS: APPLY: add fifo-merge support"
Revert "OMAPDSS: APPLY: add fifo merge support funcs"
OMAPDSS: Improve fifo management code
OMAPDSS: Use WB fifo for GFX overlay
OMAPDSS: fix set_timings
OMAPDSS: fix dss_ovl_unset_manager
Merge miscellaneous omapdss changes
Merge branch 'fbdev-for-linus' of git://github.com/schandinat/linux-2.6
OMAPDSS: omap_dss_register_device() doesn't take display index
OMAPDSS: Add dss_get_default_display_name()
OMAPDSS: register only one display device per output
OMAPDSS: explicitely initialize dssdev->channel for new displays
OMAPDSS: handle errors in dss_init_device
OMAPDSS: cleanup dss_recheck_connections
OMAPDSS: cleanup dss_recheck_connections further
OMAPDSS: alloc dssdevs dynamically
OMAPDSS: DSI: improve DSI clock calcs for DISPC
OMAPDSS: move dss feats to the end of dss.c
OMAPDSS: Add support for DPI source selection
OMAPDSS: DSI: Add FEAT_DSI_PLL_SELFREQDCO
OMAPDSS: DSI: Add FEAT_DSI_PLL_REFSEL
OMAPDSS: DSI: Add new linebuffer size for OMAP5
OMAPDSS: DSI: Add code to disable PHY DCC
OMAPDSS: DSI: make OMAP2_DSS_DSI depend on ARCH_OMAP5
Merge omapdss single-dssdev series
Merge OMAP5 DSS changes to omapdss
OMAPDSS: DSI: fix tlpx_half reg field length
Merge branch 'archit/outputs-for-3.7'
Merge branch 'archit/wb-dispc-for-3.7'
OMAPDSS: add missing include for string.h
arch/arm/mach-omap2/board-4430sdp.c | 73 +-
arch/arm/mach-omap2/board-omap4panda.c | 27 +-
arch/arm/mach-omap2/display.c | 1 -
arch/arm/mach-omap2/twl-common.c | 6 +
drivers/media/video/omap/omap_vout.c | 75 +-
drivers/staging/omapdrm/omap_drv.c | 5 +-
drivers/video/auo_k190x.c | 2 -
drivers/video/console/bitblit.c | 2 +-
drivers/video/console/fbcon.c | 2 +-
drivers/video/mb862xx/mb862xxfbdrv.c | 2 +
drivers/video/omap/hwa742.c | 1 -
drivers/video/omap/lcd_ams_delta.c | 1 -
drivers/video/omap/lcd_palmte.c | 1 -
drivers/video/omap/omapfb_main.c | 9 -
drivers/video/omap2/displays/panel-acx565akm.c | 14 +-
drivers/video/omap2/displays/panel-generic-dpi.c | 76 +-
.../omap2/displays/panel-lgphilips-lb035q02.c | 3 +
drivers/video/omap2/displays/panel-n8x0.c | 31 +-
.../omap2/displays/panel-nec-nl8048hl11-01b.c | 3 +
drivers/video/omap2/displays/panel-picodlp.c | 4 +
.../video/omap2/displays/panel-sharp-ls037v7dw01.c | 3 +
drivers/video/omap2/displays/panel-taal.c | 239 ++---
drivers/video/omap2/displays/panel-tfp410.c | 20 +-
.../video/omap2/displays/panel-tpo-td043mtea1.c | 7 +-
drivers/video/omap2/dss/Kconfig | 2 +-
drivers/video/omap2/dss/Makefile | 4 +-
drivers/video/omap2/dss/apply.c | 330 ++-----
drivers/video/omap2/dss/core.c | 91 +-
drivers/video/omap2/dss/dispc.c | 1019 ++++++++++++++------
drivers/video/omap2/dss/dispc.h | 37 +
drivers/video/omap2/dss/display.c | 108 ++-
drivers/video/omap2/dss/dpi.c | 181 +++-
drivers/video/omap2/dss/dsi.c | 675 ++++++++++---
drivers/video/omap2/dss/dss.c | 257 +++--
drivers/video/omap2/dss/dss.h | 79 +-
drivers/video/omap2/dss/dss_features.c | 278 +++++-
drivers/video/omap2/dss/dss_features.h | 7 +
drivers/video/omap2/dss/hdmi.c | 247 +++--
drivers/video/omap2/dss/hdmi_panel.c | 31 +-
drivers/video/omap2/dss/manager-sysfs.c | 512 ++++++++++
drivers/video/omap2/dss/manager.c | 473 +--------
drivers/video/omap2/dss/output.c | 148 +++
drivers/video/omap2/dss/overlay-sysfs.c | 456 +++++++++
drivers/video/omap2/dss/overlay.c | 492 +---------
drivers/video/omap2/dss/rfbi.c | 222 +++--
drivers/video/omap2/dss/sdi.c | 136 ++-
drivers/video/omap2/dss/venc.c | 337 +++----
drivers/video/omap2/dss/venc_panel.c | 251 +++++
drivers/video/omap2/omapfb/omapfb-ioctl.c | 7 +-
drivers/video/omap2/omapfb/omapfb-main.c | 34 +-
drivers/video/omap2/omapfb/omapfb.h | 5 +-
drivers/video/omap2/vram.c | 56 --
include/video/omapdss.h | 112 ++-
53 files changed, 4592 insertions(+), 2602 deletions(-)
create mode 100644 drivers/video/omap2/dss/manager-sysfs.c
create mode 100644 drivers/video/omap2/dss/output.c
create mode 100644 drivers/video/omap2/dss/overlay-sysfs.c
create mode 100644 drivers/video/omap2/dss/venc_panel.c
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 836 bytes --]
next reply other threads:[~2012-10-01 19:45 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-01 19:45 Tomi Valkeinen [this message]
2012-10-10 12:48 ` [GIT PULL] OMAP DSS for v3.7 Florian Tobias Schandinat
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1349120714.13060.8.camel@lappyti \
--to=tomi.valkeinen@ti.com \
--cc=FlorianSchandinat@gmx.de \
--cc=linux-fbdev@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).