From: Steffen Trumtrar <s.trumtrar@pengutronix.de>
To: devicetree-discuss@lists.ozlabs.org
Cc: Steffen Trumtrar <s.trumtrar@pengutronix.de>,
Rob Herring <robherring2@gmail.com>,
linux-fbdev@vger.kernel.org, dri-devel@lists.freedesktop.org,
Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
linux-media@vger.kernel.org,
Tomi Valkeinen <tomi.valkeinen@ti.com>
Subject: [PATCH 1/2 v6] of: add helper to parse display timings
Date: Thu, 04 Oct 2012 17:59:19 +0000 [thread overview]
Message-ID: <1349373560-11128-2-git-send-email-s.trumtrar@pengutronix.de> (raw)
In-Reply-To: <1349373560-11128-1-git-send-email-s.trumtrar@pengutronix.de>
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
---
.../devicetree/bindings/video/display-timings.txt | 222 ++++++++++++++++++++
drivers/of/Kconfig | 5 +
drivers/of/Makefile | 1 +
drivers/of/of_display_timings.c | 183 ++++++++++++++++
include/linux/of_display_timings.h | 85 ++++++++
5 files changed, 496 insertions(+)
create mode 100644 Documentation/devicetree/bindings/video/display-timings.txt
create mode 100644 drivers/of/of_display_timings.c
create mode 100644 include/linux/of_display_timings.h
diff --git a/Documentation/devicetree/bindings/video/display-timings.txt b/Documentation/devicetree/bindings/video/display-timings.txt
new file mode 100644
index 0000000..45e39bd
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/display-timings.txt
@@ -0,0 +1,222 @@
+display-timings bindings
+=========
+
+display-timings-node
+------------
+
+required properties:
+ - none
+
+optional properties:
+ - default-timing: the default timing value
+
+timings-subnode
+---------------
+
+required properties:
+ - hactive, vactive: Display resolution
+ - hfront-porch, hback-porch, hsync-len: Horizontal Display timing parameters
+ in pixels
+ vfront-porch, vback-porch, vsync-len: Vertical display timing parameters in
+ lines
+ - clock: displayclock in Hz
+
+optional properties:
+ - hsync-active-high (bool): Hsync pulse is active high
+ - vsync-active-high (bool): Vsync pulse is active high
+ - de-active-high (bool): Data-Enable pulse is active high
+ - pixelclk-inverted (bool): pixelclock is inverted
+ - interlaced (bool)
+ - doublescan (bool)
+
+There are different ways of describing the capabilities of a display. The devicetree
+representation corresponds to the one commonly found in datasheets for displays.
+If a display supports multiple signal timings, the default-timing can be specified.
+
+The parameters are defined as
+
+struct signal_timing
+=========+
+ +----------+---------------------------------------------+----------+-------+
+ | | ↑ | | |
+ | | |vback_porch | | |
+ | | ↓ | | |
+ +----------###############################################----------+-------+
+ | # ↑ # | |
+ | # | # | |
+ | hback # | # hfront | hsync |
+ | porch # | hactive # porch | len |
+ |<-------->#<---------------+--------------------------->#<-------->|<----->|
+ | # | # | |
+ | # |vactive # | |
+ | # | # | |
+ | # ↓ # | |
+ +----------###############################################----------+-------+
+ | | ↑ | | |
+ | | |vfront_porch | | |
+ | | ↓ | | |
+ +----------+---------------------------------------------+----------+-------+
+ | | ↑ | | |
+ | | |vsync_len | | |
+ | | ↓ | | |
+ +----------+---------------------------------------------+----------+-------+
+
+
+Example:
+
+ display-timings {
+ default-timing = <&timing0>;
+ timing0: 1920p24 {
+ /* 1920x1080p24 */
+ clock = <52000000>;
+ hactive = <1920>;
+ vactive = <1080>;
+ hfront-porch = <25>;
+ hback-porch = <25>;
+ hsync-len = <25>;
+ vback-porch = <2>;
+ vfront-porch = <2>;
+ vsync-len = <2>;
+ hsync-active-high;
+ };
+ };
+
+Every property also supports the use of ranges, so the commonly used datasheet
+description with <min typ max>-tuples can be used.
+
+Example:
+
+ timing1: timing {
+ /* 1920x1080p24 */
+ clock = <148500000>;
+ hactive = <1920>;
+ vactive = <1080>;
+ hsync-len = <0 44 60>;
+ hfront-porch = <80 88 95>;
+ hback-porch = <100 148 160>;
+ vfront-porch = <0 4 6>;
+ vback-porch = <0 36 50>;
+ vsync-len = <0 5 6>;
+ };
+
+Usage in backend
+========
+
+A backend driver may choose to use the display-timings directly and convert the timing
+ranges to a suitable mode. Or it may just use the conversion of the display timings
+to the required mode via the generic videomode struct.
+
+ dtb
+ |
+ | of_get_display_timing_list
+ ↓
+ struct display_timings
+ |
+ | videomode_from_timing
+ ↓
+ --- struct videomode ---
+ | |
+ videomode_to_displaymode | | videomode_to_fb_videomode
+ ↓ ↓
+ drm_display_mode fb_videomode
+
+The functions of_get_fb_videomode and of_get_display_mode are provided
+to conveniently get the respective mode representation from the devicetree.
+
+Conversion to videomode
+===========+
+As device drivers normally work with some kind of video mode, the timings can be
+converted (may be just a simple copying of the typical value) to a generic videomode
+structure which then can be converted to the according mode used by the backend.
+
+Supported modes
+=======+
+The generic videomode read in by the driver can be converted to the following
+modes with the following parameters
+
+struct fb_videomode
+=========+
+ +----------+---------------------------------------------+----------+-------+
+ | | ↑ | | |
+ | | |upper_margin | | |
+ | | ↓ | | |
+ +----------###############################################----------+-------+
+ | # ↑ # | |
+ | # | # | |
+ | # | # | |
+ | # | # | |
+ | left # | # right | hsync |
+ | margin # | xres # margin | len |
+ |<-------->#<---------------+--------------------------->#<-------->|<----->|
+ | # | # | |
+ | # | # | |
+ | # | # | |
+ | # |yres # | |
+ | # | # | |
+ | # | # | |
+ | # | # | |
+ | # | # | |
+ | # | # | |
+ | # | # | |
+ | # | # | |
+ | # | # | |
+ | # ↓ # | |
+ +----------###############################################----------+-------+
+ | | ↑ | | |
+ | | |lower_margin | | |
+ | | ↓ | | |
+ +----------+---------------------------------------------+----------+-------+
+ | | ↑ | | |
+ | | |vsync_len | | |
+ | | ↓ | | |
+ +----------+---------------------------------------------+----------+-------+
+
+clock in nanoseconds
+
+struct drm_display_mode
+===========+
+ +----------+---------------------------------------------+----------+-------+
+ | | | | | ↑
+ | | | | | |
+ | | | | | |
+ +----------###############################################----------+-------+ |
+ | # ↑ ↑ ↑ # | | |
+ | # | | | # | | |
+ | # | | | # | | |
+ | # | | | # | | |
+ | # | | | # | | |
+ | # | | | hdisplay # | | |
+ | #<--+--------------------+-------------------># | | |
+ | # | | | # | | |
+ | # |vsync_start | # | | |
+ | # | | | # | | |
+ | # | |vsync_end | # | | |
+ | # | | |vdisplay # | | |
+ | # | | | # | | |
+ | # | | | # | | |
+ | # | | | # | | | vtotal
+ | # | | | # | | |
+ | # | | | hsync_start # | | |
+ | #<--+---------+----------+------------------------------>| | |
+ | # | | | # | | |
+ | # | | | hsync_end # | | |
+ | #<--+---------+----------+-------------------------------------->| |
+ | # | | ↓ # | | |
+ +----------####|#########|################################----------+-------+ |
+ | | | | | | | |
+ | | | | | | | |
+ | | ↓ | | | | |
+ +----------+-------------+-------------------------------+----------+-------+ |
+ | | | | | | |
+ | | | | | | |
+ | | ↓ | | | ↓
+ +----------+---------------------------------------------+----------+-------+
+ htotal
+ <------------------------------------------------------------------------->
+
+clock in kilohertz
diff --git a/drivers/of/Kconfig b/drivers/of/Kconfig
index dfba3e6..646deb0 100644
--- a/drivers/of/Kconfig
+++ b/drivers/of/Kconfig
@@ -83,4 +83,9 @@ config OF_MTD
depends on MTD
def_bool y
+config OF_DISPLAY_TIMINGS
+ def_bool y
+ help
+ helper to parse display timings from the devicetree
+
endmenu # OF
diff --git a/drivers/of/Makefile b/drivers/of/Makefile
index e027f44..c8e9603 100644
--- a/drivers/of/Makefile
+++ b/drivers/of/Makefile
@@ -11,3 +11,4 @@ obj-$(CONFIG_OF_MDIO) += of_mdio.o
obj-$(CONFIG_OF_PCI) += of_pci.o
obj-$(CONFIG_OF_PCI_IRQ) += of_pci_irq.o
obj-$(CONFIG_OF_MTD) += of_mtd.o
+obj-$(CONFIG_OF_DISPLAY_TIMINGS) += of_display_timings.o
diff --git a/drivers/of/of_display_timings.c b/drivers/of/of_display_timings.c
new file mode 100644
index 0000000..e47bc63
--- /dev/null
+++ b/drivers/of/of_display_timings.c
@@ -0,0 +1,183 @@
+/*
+ * OF helpers for parsing display timings
+ *
+ * Copyright (c) 2012 Steffen Trumtrar <s.trumtrar@pengutronix.de>, Pengutronix
+ *
+ * based on of_videomode.c by Sascha Hauer <s.hauer@pengutronix.de>
+ *
+ * This file is released under the GPLv2
+ */
+#include <linux/of.h>
+#include <linux/slab.h>
+#include <linux/export.h>
+#include <linux/of_display_timings.h>
+
+/* every signal_timing can be specified with either
+ * just the typical value or a range consisting of
+ * min/typ/max.
+ * This function helps handling this
+ */
+static int parse_property(struct device_node *np, char *name,
+ struct timing_entry *result)
+{
+ struct property *prop;
+ int length;
+ int cells;
+ int ret;
+
+ prop = of_find_property(np, name, &length);
+ if (!prop) {
+ pr_err("%s: could not find property %s\n", __func__, name);
+ return -EINVAL;
+ }
+
+ cells = length / sizeof(u32);
+
+ if (cells = 1)
+ ret = of_property_read_u32_array(np, name, &result->typ, cells);
+ else if (cells = 3)
+ ret = of_property_read_u32_array(np, name, &result->min, cells);
+ else {
+ pr_err("%s: illegal timing specification in %s\n", __func__,
+ name);
+ return -EINVAL;
+ }
+
+ return ret;
+}
+
+struct signal_timing *of_get_display_timing(struct device_node *np)
+{
+ struct signal_timing *st;
+ int ret = 0;
+
+ st = kzalloc(sizeof(*st), GFP_KERNEL);
+
+ if (!st) {
+ pr_err("%s: could not allocate signal_timing struct\n", __func__);
+ return NULL;
+ }
+
+ ret |= parse_property(np, "hback-porch", &st->hback_porch);
+ ret |= parse_property(np, "hfront-porch", &st->hfront_porch);
+ ret |= parse_property(np, "hactive", &st->hactive);
+ ret |= parse_property(np, "hsync-len", &st->hsync_len);
+ ret |= parse_property(np, "vback-porch", &st->vback_porch);
+ ret |= parse_property(np, "vfront-porch", &st->vfront_porch);
+ ret |= parse_property(np, "vactive", &st->vactive);
+ ret |= parse_property(np, "vsync-len", &st->vsync_len);
+ ret |= parse_property(np, "clock", &st->pixelclock);
+
+ st->vsync_pol_active_high = of_property_read_bool(np, "vsync-active-high");
+ st->hsync_pol_active_high = of_property_read_bool(np, "hsync-active-high");
+ st->de_pol_active_high = of_property_read_bool(np, "de-active-high");
+ st->pixelclk_pol_inverted = of_property_read_bool(np, "pixelclk-inverted");
+ st->interlaced = of_property_read_bool(np, "interlaced");
+ st->doublescan = of_property_read_bool(np, "doublescan");
+
+ if (ret) {
+ pr_err("%s: error reading timing properties\n", __func__);
+ return NULL;
+ }
+
+ return st;
+}
+EXPORT_SYMBOL_GPL(of_get_display_timing);
+
+struct display_timings *of_get_display_timing_list(struct device_node *np)
+{
+ struct device_node *timings_np;
+ struct device_node *entry;
+ struct display_timings *disp;
+ char *default_timing;
+
+ if (!np) {
+ pr_err("%s: no devicenode given\n", __func__);
+ return NULL;
+ }
+
+ timings_np = of_find_node_by_name(np, "display-timings");
+
+ if (!timings_np) {
+ pr_err("%s: could not find display-timings node\n", __func__);
+ return NULL;
+ }
+
+ disp = kzalloc(sizeof(*disp), GFP_KERNEL);
+
+ entry = of_parse_phandle(timings_np, "default-timing", 0);
+
+ if (!entry) {
+ pr_info("%s: no default-timing specified\n", __func__);
+ entry = of_find_node_by_name(np, "timing");
+ }
+
+ if (!entry) {
+ pr_info("%s: no timing specifications given\n", __func__);
+ return disp;
+ }
+
+ pr_info("%s: using %s as default timing\n", __func__, entry->name);
+
+ default_timing = (char *)entry->full_name;
+
+ disp->num_timings = 0;
+
+ for_each_child_of_node(timings_np, entry) {
+ disp->num_timings++;
+ }
+
+ disp->timings = kzalloc(sizeof(struct signal_timing *)*disp->num_timings,
+ GFP_KERNEL);
+
+ disp->num_timings = 0;
+
+ for_each_child_of_node(timings_np, entry) {
+ struct signal_timing *st;
+
+ st = of_get_display_timing(entry);
+
+ if (!st)
+ continue;
+
+ if (strcmp(default_timing, entry->full_name) = 0)
+ disp->default_timing = disp->num_timings;
+
+ disp->timings[disp->num_timings] = st;
+ disp->num_timings++;
+ }
+
+
+ of_node_put(timings_np);
+
+ if (disp->num_timings >= 0)
+ pr_info("%s: got %d timings. Using timing #%d as default\n", __func__,
+ disp->num_timings , disp->default_timing + 1);
+ else
+ pr_info("%s: no timings specified\n", __func__);
+
+ return disp;
+}
+EXPORT_SYMBOL_GPL(of_get_display_timing_list);
+
+int of_display_timings_exists(struct device_node *np)
+{
+ struct device_node *timings_np;
+ struct device_node *default_np;
+
+ if (!np)
+ return -EINVAL;
+
+ timings_np = of_parse_phandle(np, "display-timings", 0);
+
+ if (!timings_np)
+ return -EINVAL;
+
+ default_np = of_parse_phandle(np, "default-timing", 0);
+
+ if (default_np)
+ return 0;
+
+ return -EINVAL;
+}
+EXPORT_SYMBOL_GPL(of_display_timings_exists);
diff --git a/include/linux/of_display_timings.h b/include/linux/of_display_timings.h
new file mode 100644
index 0000000..1ad719e
--- /dev/null
+++ b/include/linux/of_display_timings.h
@@ -0,0 +1,85 @@
+/*
+ * Copyright 2012 Steffen Trumtrar <s.trumtrar@pengutronix.de>
+ *
+ * description of display timings
+ *
+ * This file is released under the GPLv2
+ */
+
+#ifndef __LINUX_OF_DISPLAY_TIMINGS_H
+#define __LINUX_OF_DISPLAY_TIMINGS_H
+
+#define OF_DEFAULT_TIMING -1
+
+struct display_timings {
+ unsigned int num_timings;
+ unsigned int default_timing;
+
+ struct signal_timing **timings;
+};
+
+struct timing_entry {
+ u32 min;
+ u32 typ;
+ u32 max;
+};
+
+struct signal_timing {
+ struct timing_entry pixelclock;
+
+ struct timing_entry hactive;
+ struct timing_entry hfront_porch;
+ struct timing_entry hback_porch;
+ struct timing_entry hsync_len;
+
+ struct timing_entry vactive;
+ struct timing_entry vfront_porch;
+ struct timing_entry vback_porch;
+ struct timing_entry vsync_len;
+
+ bool vsync_pol_active_high;
+ bool hsync_pol_active_high;
+ bool de_pol_active_high;
+ bool pixelclk_pol_inverted;
+ bool interlaced;
+ bool doublescan;
+};
+
+struct display_timings *of_get_display_timing_list(struct device_node *np);
+struct signal_timing *of_get_display_timing(struct device_node *np);
+int of_display_timings_exists(struct device_node *np);
+
+/* placeholder function until ranges are really needed */
+static inline u32 signal_timing_get_value(struct timing_entry *te, int index)
+{
+ return te->typ;
+}
+
+static inline void timings_release(struct display_timings *disp)
+{
+ int i;
+
+ for (i = 0; i < disp->num_timings; i++)
+ kfree(disp->timings[i]);
+}
+
+static inline void display_timings_release(struct display_timings *disp)
+{
+ timings_release(disp);
+ kfree(disp->timings);
+}
+
+static inline struct signal_timing *display_timings_get(struct display_timings *disp,
+ int index)
+{
+ struct signal_timing *st;
+
+ if (disp->num_timings > index) {
+ st = disp->timings[index];
+ return st;
+ }
+ else
+ return NULL;
+}
+
+#endif
--
1.7.10.4
next prev parent reply other threads:[~2012-10-04 17:59 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-04 17:59 [PATCH 0/2 v6] of: add display helper Steffen Trumtrar
2012-10-04 17:59 ` Steffen Trumtrar [this message]
2012-10-04 18:47 ` [PATCH 1/2 v6] of: add helper to parse display timings Stephen Warren
[not found] ` <506DD9B4.40409-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
2012-10-05 16:16 ` Steffen Trumtrar
2012-10-05 16:21 ` Stephen Warren
2012-10-05 16:38 ` Steffen Trumtrar
2012-10-07 13:38 ` Laurent Pinchart
2012-10-08 7:34 ` Steffen Trumtrar
[not found] ` <1349373560-11128-2-git-send-email-s.trumtrar-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2012-10-04 21:35 ` Guennadi Liakhovetski
2012-10-05 7:17 ` Robert Schwebel
2012-10-05 16:17 ` Stephen Warren
2012-10-08 8:25 ` Guennadi Liakhovetski
2012-10-08 9:01 ` Tomi Valkeinen
2012-10-08 12:04 ` Laurent Pinchart
2012-10-08 12:20 ` Tomi Valkeinen
2012-10-08 16:12 ` Stephen Warren
2012-10-08 16:34 ` Mitch Bradley
2012-10-08 16:10 ` Stephen Warren
2012-10-08 17:33 ` Laurent Pinchart
[not found] ` <Pine.LNX.4.64.1210042307300.3744-0199iw4Nj15frtckUFj5Ag@public.gmane.org>
2012-10-05 16:28 ` Steffen Trumtrar
2012-10-08 7:07 ` Tomi Valkeinen
2012-10-08 7:12 ` Tomi Valkeinen
2012-10-08 7:49 ` Steffen Trumtrar
[not found] ` <20121008074921.GB20800-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2012-10-11 19:31 ` Thierry Reding
2012-10-12 7:21 ` Steffen Trumtrar
2012-10-20 10:58 ` Thierry Reding
2012-10-20 19:59 ` Thierry Reding
2012-10-22 7:40 ` Steffen Trumtrar
2012-10-04 17:59 ` [PATCH 2/2 v6] of: add generic videomode description Steffen Trumtrar
2012-10-04 18:51 ` Stephen Warren
2012-10-05 15:51 ` Steffen Trumtrar
2012-10-07 13:38 ` Laurent Pinchart
2012-10-20 10:45 ` Thierry Reding
2012-10-08 7:21 ` Tomi Valkeinen
2012-10-08 7:57 ` Steffen Trumtrar
2012-10-08 12:19 ` Laurent Pinchart
2012-10-08 12:13 ` Laurent Pinchart
2012-10-08 12:48 ` Steffen Trumtrar
2012-10-08 20:52 ` Laurent Pinchart
2012-10-09 7:26 ` Steffen Trumtrar
[not found] ` <20121009072608.GA2519-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2012-10-20 10:54 ` Thierry Reding
2012-10-20 11:04 ` Thierry Reding
2012-10-22 7:35 ` Steffen Trumtrar
[not found] ` <1349373560-11128-1-git-send-email-s.trumtrar-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2012-10-15 10:55 ` [PATCH 0/2 v6] of: add display helper Leela Krishna Amudala
2012-10-15 14:17 ` Steffen Trumtrar
2012-10-20 11:35 ` Thierry Reding
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1349373560-11128-2-git-send-email-s.trumtrar@pengutronix.de \
--to=s.trumtrar@pengutronix.de \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-fbdev@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=robherring2@gmail.com \
--cc=tomi.valkeinen@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).