* [PATCH v9 1/6] video: add display_timing and videomode
2012-11-14 11:43 [PATCH v9 0/6] of: add display helper Steffen Trumtrar
@ 2012-11-14 11:43 ` Steffen Trumtrar
[not found] ` <1352893403-21168-2-git-send-email-s.trumtrar-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2012-11-14 11:43 ` [PATCH v9 2/6] video: add of helper for videomode Steffen Trumtrar
` (4 subsequent siblings)
5 siblings, 1 reply; 17+ messages in thread
From: Steffen Trumtrar @ 2012-11-14 11:43 UTC (permalink / raw)
To: devicetree-discuss
Cc: Steffen Trumtrar, Rob Herring, linux-fbdev, dri-devel,
Laurent Pinchart, Thierry Reding, Guennady Liakhovetski,
linux-media, Tomi Valkeinen, Stephen Warren, kernel
Add display_timing structure and the according helper functions. This allows
the description of a display via its supported timing parameters.
Every timing parameter can be specified as a single value or a range
<min typ max>.
Also, add helper functions to convert from display timings to a generic videomode
structure. This videomode can then be converted to the corresponding subsystem
mode representation (e.g. fb_videomode).
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
---
drivers/video/Kconfig | 6 ++++
drivers/video/Makefile | 2 ++
drivers/video/display_timing.c | 24 ++++++++++++++
drivers/video/videomode.c | 45 ++++++++++++++++++++++++++
include/linux/display_timing.h | 69 ++++++++++++++++++++++++++++++++++++++++
include/linux/videomode.h | 39 +++++++++++++++++++++++
6 files changed, 185 insertions(+)
create mode 100644 drivers/video/display_timing.c
create mode 100644 drivers/video/videomode.c
create mode 100644 include/linux/display_timing.h
create mode 100644 include/linux/videomode.h
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index d08d799..2a23b18 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -33,6 +33,12 @@ config VIDEO_OUTPUT_CONTROL
This framework adds support for low-level control of the video
output switch.
+config DISPLAY_TIMING
+ bool
+
+config VIDEOMODE
+ bool
+
menuconfig FB
tristate "Support for frame buffer devices"
---help---
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index 23e948e..fc30439 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -167,3 +167,5 @@ obj-$(CONFIG_FB_VIRTUAL) += vfb.o
#video output switch sysfs driver
obj-$(CONFIG_VIDEO_OUTPUT_CONTROL) += output.o
+obj-$(CONFIG_DISPLAY_TIMING) += display_timing.o
+obj-$(CONFIG_VIDEOMODE) += videomode.o
diff --git a/drivers/video/display_timing.c b/drivers/video/display_timing.c
new file mode 100644
index 0000000..ac9bbbc
--- /dev/null
+++ b/drivers/video/display_timing.c
@@ -0,0 +1,24 @@
+/*
+ * generic display timing functions
+ *
+ * Copyright (c) 2012 Steffen Trumtrar <s.trumtrar@pengutronix.de>, Pengutronix
+ *
+ * This file is released under the GPLv2
+ */
+
+#include <linux/display_timing.h>
+#include <linux/export.h>
+#include <linux/slab.h>
+
+void display_timings_release(struct display_timings *disp)
+{
+ if (disp->timings) {
+ unsigned int i;
+
+ for (i = 0; i < disp->num_timings; i++)
+ kfree(disp->timings[i]);
+ kfree(disp->timings);
+ }
+ kfree(disp);
+}
+EXPORT_SYMBOL_GPL(display_timings_release);
diff --git a/drivers/video/videomode.c b/drivers/video/videomode.c
new file mode 100644
index 0000000..087374a
--- /dev/null
+++ b/drivers/video/videomode.c
@@ -0,0 +1,45 @@
+/*
+ * generic display timing functions
+ *
+ * Copyright (c) 2012 Steffen Trumtrar <s.trumtrar@pengutronix.de>, Pengutronix
+ *
+ * This file is released under the GPLv2
+ */
+
+#include <linux/export.h>
+#include <linux/errno.h>
+#include <linux/display_timing.h>
+#include <linux/kernel.h>
+#include <linux/videomode.h>
+
+int videomode_from_timing(struct display_timings *disp, struct videomode *vm,
+ unsigned int index)
+{
+ struct display_timing *dt;
+
+ dt = display_timings_get(disp, index);
+ if (!dt)
+ return -EINVAL;
+
+ vm->pixelclock = display_timing_get_value(&dt->pixelclock, 0);
+ vm->hactive = display_timing_get_value(&dt->hactive, 0);
+ vm->hfront_porch = display_timing_get_value(&dt->hfront_porch, 0);
+ vm->hback_porch = display_timing_get_value(&dt->hback_porch, 0);
+ vm->hsync_len = display_timing_get_value(&dt->hsync_len, 0);
+
+ vm->vactive = display_timing_get_value(&dt->vactive, 0);
+ vm->vfront_porch = display_timing_get_value(&dt->vfront_porch, 0);
+ vm->vback_porch = display_timing_get_value(&dt->vback_porch, 0);
+ vm->vsync_len = display_timing_get_value(&dt->vsync_len, 0);
+
+ vm->vah = dt->vsync_pol_active;
+ vm->hah = dt->hsync_pol_active;
+ vm->de = dt->de_pol_active;
+ vm->pixelclk_pol = dt->pixelclk_pol;
+
+ vm->interlaced = dt->interlaced;
+ vm->doublescan = dt->doublescan;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(videomode_from_timing);
diff --git a/include/linux/display_timing.h b/include/linux/display_timing.h
new file mode 100644
index 0000000..caee2a8
--- /dev/null
+++ b/include/linux/display_timing.h
@@ -0,0 +1,69 @@
+/*
+ * Copyright 2012 Steffen Trumtrar <s.trumtrar@pengutronix.de>
+ *
+ * description of display timings
+ *
+ * This file is released under the GPLv2
+ */
+
+#ifndef __LINUX_DISPLAY_TIMINGS_H
+#define __LINUX_DISPLAY_TIMINGS_H
+
+#include <linux/types.h>
+
+struct timing_entry {
+ u32 min;
+ u32 typ;
+ u32 max;
+};
+
+struct display_timing {
+ struct timing_entry pixelclock;
+
+ struct timing_entry hactive;
+ struct timing_entry hfront_porch;
+ struct timing_entry hback_porch;
+ struct timing_entry hsync_len;
+
+ struct timing_entry vactive;
+ struct timing_entry vfront_porch;
+ struct timing_entry vback_porch;
+ struct timing_entry vsync_len;
+
+ unsigned int vsync_pol_active;
+ unsigned int hsync_pol_active;
+ unsigned int de_pol_active;
+ unsigned int pixelclk_pol;
+ bool interlaced;
+ bool doublescan;
+};
+
+struct display_timings {
+ unsigned int num_timings;
+ unsigned int native_mode;
+
+ struct display_timing **timings;
+};
+
+/*
+ * placeholder function until ranges are really needed
+ * the index parameter should then be used to select one of [min typ max]
+ */
+static inline u32 display_timing_get_value(struct timing_entry *te,
+ unsigned int index)
+{
+ return te->typ;
+}
+
+static inline struct display_timing *display_timings_get(struct display_timings *disp,
+ unsigned int index)
+{
+ if (disp->num_timings > index)
+ return disp->timings[index];
+ else
+ return NULL;
+}
+
+void display_timings_release(struct display_timings *disp);
+
+#endif
diff --git a/include/linux/videomode.h b/include/linux/videomode.h
new file mode 100644
index 0000000..0b87fbb
--- /dev/null
+++ b/include/linux/videomode.h
@@ -0,0 +1,39 @@
+/*
+ * Copyright 2012 Steffen Trumtrar <s.trumtrar@pengutronix.de>
+ *
+ * generic videomode description
+ *
+ * This file is released under the GPLv2
+ */
+
+#ifndef __LINUX_VIDEOMODE_H
+#define __LINUX_VIDEOMODE_H
+
+#include <linux/display_timing.h>
+
+struct videomode {
+ u32 pixelclock;
+ u32 refreshrate;
+
+ u32 hactive;
+ u32 hfront_porch;
+ u32 hback_porch;
+ u32 hsync_len;
+
+ u32 vactive;
+ u32 vfront_porch;
+ u32 vback_porch;
+ u32 vsync_len;
+
+ u32 hah;
+ u32 vah;
+ u32 de;
+ u32 pixelclk_pol;
+
+ bool interlaced;
+ bool doublescan;
+};
+
+int videomode_from_timing(struct display_timings *disp, struct videomode *vm,
+ unsigned int index);
+#endif
--
1.7.10.4
^ permalink raw reply related [flat|nested] 17+ messages in thread* [PATCH v9 2/6] video: add of helper for videomode
2012-11-14 11:43 [PATCH v9 0/6] of: add display helper Steffen Trumtrar
2012-11-14 11:43 ` [PATCH v9 1/6] video: add display_timing and videomode Steffen Trumtrar
@ 2012-11-14 11:43 ` Steffen Trumtrar
2012-11-14 12:00 ` Thierry Reding
[not found] ` <1352893403-21168-3-git-send-email-s.trumtrar-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2012-11-14 11:43 ` [PATCH v9 3/6] fbmon: add videomode helpers Steffen Trumtrar
` (3 subsequent siblings)
5 siblings, 2 replies; 17+ messages in thread
From: Steffen Trumtrar @ 2012-11-14 11:43 UTC (permalink / raw)
To: devicetree-discuss
Cc: Steffen Trumtrar, Philipp Zabel, Rob Herring, linux-fbdev,
dri-devel, Laurent Pinchart, Thierry Reding,
Guennady Liakhovetski, linux-media, Tomi Valkeinen,
Stephen Warren, kernel
This adds support for reading display timings from DT or/and convert one of those
timings to a videomode.
The of_display_timing implementation supports multiple children where each
property can have up to 3 values. All children are read into an array, that
can be queried.
of_get_videomode converts exactly one of that timings to a struct videomode.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Stephen Warren <swarren@nvidia.com>
---
.../devicetree/bindings/video/display-timings.txt | 107 ++++++++++
drivers/video/Kconfig | 13 ++
drivers/video/Makefile | 2 +
drivers/video/of_display_timing.c | 211 ++++++++++++++++++++
drivers/video/of_videomode.c | 47 +++++
include/linux/of_display_timings.h | 20 ++
include/linux/of_videomode.h | 16 ++
7 files changed, 416 insertions(+)
create mode 100644 Documentation/devicetree/bindings/video/display-timings.txt
create mode 100644 drivers/video/of_display_timing.c
create mode 100644 drivers/video/of_videomode.c
create mode 100644 include/linux/of_display_timings.h
create mode 100644 include/linux/of_videomode.h
diff --git a/Documentation/devicetree/bindings/video/display-timings.txt b/Documentation/devicetree/bindings/video/display-timings.txt
new file mode 100644
index 0000000..c9d9e1b
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/display-timings.txt
@@ -0,0 +1,107 @@
+display-timings bindings
+============
+
+display timings node
+--------------------
+
+required properties:
+ - none
+
+optional properties:
+ - native-mode: the native mode for the display, in case multiple modes are
+ provided. When omitted, assume the first node is the native.
+
+timings subnode
+---------------
+
+required properties:
+ - hactive, vactive: Display resolution
+ - hfront-porch, hback-porch, hsync-len: Horizontal Display timing parameters
+ in pixels
+ vfront-porch, vback-porch, vsync-len: Vertical display timing parameters in
+ lines
+ - clock-frequency: displayclock in Hz
+
+optional properties:
+ - hsync-active: Hsync pulse is active low/high/ignored
+ - vsync-active: Vsync pulse is active low/high/ignored
+ - de-active: Data-Enable pulse is active low/high/ignored
+ - pixelclk-inverted: pixelclock is inverted/non-inverted/ignored
+ - interlaced (bool)
+ - doublescan (bool)
+
+All the optional properties that are not bool follow the following logic:
+ <1>: high active
+ <0>: low active
+ omitted: not used on hardware
+
+There are different ways of describing the capabilities of a display. The devicetree
+representation corresponds to the one commonly found in datasheets for displays.
+If a display supports multiple signal timings, the native-mode can be specified.
+
+The parameters are defined as
+
+struct display_timing
+==========+
+ +----------+---------------------------------------------+----------+-------+
+ | | ↑ | | |
+ | | |vback_porch | | |
+ | | ↓ | | |
+ +----------###############################################----------+-------+
+ | # ↑ # | |
+ | # | # | |
+ | hback # | # hfront | hsync |
+ | porch # | hactive # porch | len |
+ |<-------->#<---------------+--------------------------->#<-------->|<----->|
+ | # | # | |
+ | # |vactive # | |
+ | # | # | |
+ | # ↓ # | |
+ +----------###############################################----------+-------+
+ | | ↑ | | |
+ | | |vfront_porch | | |
+ | | ↓ | | |
+ +----------+---------------------------------------------+----------+-------+
+ | | ↑ | | |
+ | | |vsync_len | | |
+ | | ↓ | | |
+ +----------+---------------------------------------------+----------+-------+
+
+
+Example:
+
+ display-timings {
+ native-mode = <&timing0>;
+ timing0: 1920p24 {
+ /* 1920x1080p24 */
+ clock-frequency = <52000000>;
+ hactive = <1920>;
+ vactive = <1080>;
+ hfront-porch = <25>;
+ hback-porch = <25>;
+ hsync-len = <25>;
+ vback-porch = <2>;
+ vfront-porch = <2>;
+ vsync-len = <2>;
+ hsync-active = <1>;
+ };
+ };
+
+Every required property also supports the use of ranges, so the commonly used
+datasheet description with <min typ max>-tuples can be used.
+
+Example:
+
+ timing1: timing {
+ /* 1920x1080p24 */
+ clock-frequency = <148500000>;
+ hactive = <1920>;
+ vactive = <1080>;
+ hsync-len = <0 44 60>;
+ hfront-porch = <80 88 95>;
+ hback-porch = <100 148 160>;
+ vfront-porch = <0 4 6>;
+ vback-porch = <0 36 50>;
+ vsync-len = <0 5 6>;
+ };
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 2a23b18..a324457 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -39,6 +39,19 @@ config DISPLAY_TIMING
config VIDEOMODE
bool
+config OF_DISPLAY_TIMING
+ def_bool y
+ select DISPLAY_TIMING
+ help
+ helper to parse display timings from the devicetree
+
+config OF_VIDEOMODE
+ def_bool y
+ select VIDEOMODE
+ select OF_DISPLAY_TIMING
+ help
+ helper to get videomodes from the devicetree
+
menuconfig FB
tristate "Support for frame buffer devices"
---help---
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index fc30439..b936b00 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -168,4 +168,6 @@ obj-$(CONFIG_FB_VIRTUAL) += vfb.o
#video output switch sysfs driver
obj-$(CONFIG_VIDEO_OUTPUT_CONTROL) += output.o
obj-$(CONFIG_DISPLAY_TIMING) += display_timing.o
+obj-$(CONFIG_OF_DISPLAY_TIMING) += of_display_timing.o
obj-$(CONFIG_VIDEOMODE) += videomode.o
+obj-$(CONFIG_OF_VIDEOMODE) += of_videomode.o
diff --git a/drivers/video/of_display_timing.c b/drivers/video/of_display_timing.c
new file mode 100644
index 0000000..2af9a55
--- /dev/null
+++ b/drivers/video/of_display_timing.c
@@ -0,0 +1,211 @@
+/*
+ * OF helpers for parsing display timings
+ *
+ * Copyright (c) 2012 Steffen Trumtrar <s.trumtrar@pengutronix.de>, Pengutronix
+ *
+ * based on of_videomode.c by Sascha Hauer <s.hauer@pengutronix.de>
+ *
+ * This file is released under the GPLv2
+ */
+#include <linux/of.h>
+#include <linux/slab.h>
+#include <linux/export.h>
+#include <linux/of_display_timings.h>
+
+/**
+ * parse_property - parse timing_entry from device_node
+ * @np: device_node with the property
+ * @name: name of the property
+ * @result: will be set to the return value
+ *
+ * DESCRIPTION:
+ * Every display_timing can be specified with either just the typical value or
+ * a range consisting of min/typ/max. This function helps handling this
+ **/
+static int parse_property(struct device_node *np, char *name,
+ struct timing_entry *result)
+{
+ struct property *prop;
+ int length, cells, ret;
+
+ prop = of_find_property(np, name, &length);
+ if (!prop) {
+ pr_err("%s: could not find property %s\n", __func__, name);
+ return -EINVAL;
+ }
+
+ cells = length / sizeof(u32);
+ if (cells = 1) {
+ ret = of_property_read_u32(np, name, &result->typ);
+ result->min = result->typ;
+ result->max = result->typ;
+ } else if (cells = 3) {
+ ret = of_property_read_u32_array(np, name, &result->min, cells);
+ } else {
+ pr_err("%s: illegal timing specification in %s\n", __func__, name);
+ return -EINVAL;
+ }
+
+ return ret;
+}
+
+/**
+ * of_get_display_timing - parse display_timing entry from device_node
+ * @np: device_node with the properties
+ **/
+static struct display_timing *of_get_display_timing(struct device_node *np)
+{
+ struct display_timing *dt;
+ int ret = 0;
+
+ dt = kzalloc(sizeof(*dt), GFP_KERNEL);
+ if (!dt) {
+ pr_err("%s: could not allocate display_timing struct\n", __func__);
+ return NULL;
+ }
+
+ ret |= parse_property(np, "hback-porch", &dt->hback_porch);
+ ret |= parse_property(np, "hfront-porch", &dt->hfront_porch);
+ ret |= parse_property(np, "hactive", &dt->hactive);
+ ret |= parse_property(np, "hsync-len", &dt->hsync_len);
+ ret |= parse_property(np, "vback-porch", &dt->vback_porch);
+ ret |= parse_property(np, "vfront-porch", &dt->vfront_porch);
+ ret |= parse_property(np, "vactive", &dt->vactive);
+ ret |= parse_property(np, "vsync-len", &dt->vsync_len);
+ ret |= parse_property(np, "clock-frequency", &dt->pixelclock);
+
+ of_property_read_u32(np, "vsync-active", &dt->vsync_pol_active);
+ of_property_read_u32(np, "hsync-active", &dt->hsync_pol_active);
+ of_property_read_u32(np, "de-active", &dt->de_pol_active);
+ of_property_read_u32(np, "pixelclk-inverted", &dt->pixelclk_pol);
+ dt->interlaced = of_property_read_bool(np, "interlaced");
+ dt->doublescan = of_property_read_bool(np, "doublescan");
+
+ if (ret) {
+ pr_err("%s: error reading timing properties\n", __func__);
+ kfree(dt);
+ return NULL;
+ }
+
+ return dt;
+}
+
+/**
+ * of_get_display_timings - parse all display_timing entries from a device_node
+ * @np: device_node with the subnodes
+ **/
+struct display_timings *of_get_display_timings(struct device_node *np)
+{
+ struct device_node *timings_np;
+ struct device_node *entry;
+ struct device_node *native_mode;
+ struct display_timings *disp;
+
+ if (!np) {
+ pr_err("%s: no devicenode given\n", __func__);
+ return NULL;
+ }
+
+ timings_np = of_find_node_by_name(np, "display-timings");
+ if (!timings_np) {
+ pr_err("%s: could not find display-timings node\n", __func__);
+ return NULL;
+ }
+
+ disp = kzalloc(sizeof(*disp), GFP_KERNEL);
+ if (!disp) {
+ pr_err("%s: could not allocate struct disp'\n", __func__);
+ goto dispfail;
+ }
+
+ entry = of_parse_phandle(timings_np, "native-mode", 0);
+ /* assume first child as native mode if none provided */
+ if (!entry)
+ entry = of_get_next_child(np, NULL);
+ /* if there is no child, it is useless to go on */
+ if (!entry) {
+ pr_err("%s: no timing specifications given\n", __func__);
+ goto entryfail;
+ }
+
+ pr_info("%s: using %s as default timing\n", __func__, entry->name);
+
+ native_mode = entry;
+
+ disp->num_timings = of_get_child_count(timings_np);
+ if (disp->num_timings = 0) {
+ /* should never happen, as entry was already found above */
+ pr_err("%s: no timings specified\n", __func__);
+ goto entryfail;
+ }
+
+ disp->timings = kzalloc(sizeof(struct display_timing *)*disp->num_timings,
+ GFP_KERNEL);
+ if (!disp->timings) {
+ pr_err("%s: could not allocate timings array\n", __func__);
+ goto entryfail;
+ }
+
+ disp->num_timings = 0;
+ disp->native_mode = 0;
+
+ for_each_child_of_node(timings_np, entry) {
+ struct display_timing *dt;
+
+ dt = of_get_display_timing(entry);
+ if (!dt) {
+ /* to not encourage wrong devicetrees, fail in case of an error */
+ pr_err("%s: error in timing %d\n", __func__, disp->num_timings+1);
+ goto timingfail;
+ }
+
+ if (native_mode = entry)
+ disp->native_mode = disp->num_timings;
+
+ disp->timings[disp->num_timings] = dt;
+ disp->num_timings++;
+ }
+ of_node_put(timings_np);
+ of_node_put(native_mode);
+
+ if (disp->num_timings > 0)
+ pr_info("%s: got %d timings. Using timing #%d as default\n", __func__,
+ disp->num_timings , disp->native_mode + 1);
+ else {
+ pr_err("%s: no valid timings specified\n", __func__);
+ display_timings_release(disp);
+ return NULL;
+ }
+ return disp;
+
+timingfail:
+ if (native_mode)
+ of_node_put(native_mode);
+ kfree(disp->timings);
+entryfail:
+ kfree(disp);
+dispfail:
+ of_node_put(timings_np);
+ return NULL;
+}
+EXPORT_SYMBOL_GPL(of_get_display_timings);
+
+/**
+ * of_display_timings_exists - check if a display-timings node is provided
+ * @np: device_node with the timing
+ **/
+int of_display_timings_exists(struct device_node *np)
+{
+ struct device_node *timings_np;
+
+ if (!np)
+ return -EINVAL;
+
+ timings_np = of_parse_phandle(np, "display-timings", 0);
+ if (!timings_np)
+ return -EINVAL;
+
+ of_node_put(timings_np);
+ return 1;
+}
+EXPORT_SYMBOL_GPL(of_display_timings_exists);
diff --git a/drivers/video/of_videomode.c b/drivers/video/of_videomode.c
new file mode 100644
index 0000000..7051701
--- /dev/null
+++ b/drivers/video/of_videomode.c
@@ -0,0 +1,47 @@
+/*
+ * generic videomode helper
+ *
+ * Copyright (c) 2012 Steffen Trumtrar <s.trumtrar@pengutronix.de>, Pengutronix
+ *
+ * This file is released under the GPLv2
+ */
+#include <linux/of.h>
+#include <linux/of_display_timings.h>
+#include <linux/of_videomode.h>
+#include <linux/export.h>
+
+/**
+ * of_get_videomode - get the videomode #<index> from devicetree
+ * @np - devicenode with the display_timings
+ * @vm - set to return value
+ * @index - index into list of display_timings
+ * DESCRIPTION:
+ * Get a list of all display timings and put the one
+ * specified by index into *vm. This function should only be used, if
+ * only one videomode is to be retrieved. A driver that needs to work
+ * with multiple/all videomodes should work with
+ * of_get_display_timings instead.
+ **/
+int of_get_videomode(struct device_node *np, struct videomode *vm, int index)
+{
+ struct display_timings *disp;
+ int ret;
+
+ disp = of_get_display_timings(np);
+ if (!disp) {
+ pr_err("%s: no timings specified\n", __func__);
+ return -EINVAL;
+ }
+
+ if (index = OF_USE_NATIVE_MODE)
+ index = disp->native_mode;
+
+ ret = videomode_from_timing(disp, vm, index);
+ if (ret)
+ return ret;
+
+ display_timings_release(disp);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(of_get_videomode);
diff --git a/include/linux/of_display_timings.h b/include/linux/of_display_timings.h
new file mode 100644
index 0000000..e18cf94
--- /dev/null
+++ b/include/linux/of_display_timings.h
@@ -0,0 +1,20 @@
+/*
+ * Copyright 2012 Steffen Trumtrar <s.trumtrar@pengutronix.de>
+ *
+ * display timings of helpers
+ *
+ * This file is released under the GPLv2
+ */
+
+#ifndef __LINUX_OF_DISPLAY_TIMINGS_H
+#define __LINUX_OF_DISPLAY_TIMINGS_H
+
+#include <linux/display_timing.h>
+#include <linux/of.h>
+
+#define OF_USE_NATIVE_MODE -1
+
+struct display_timings *of_get_display_timings(struct device_node *np);
+int of_display_timings_exists(struct device_node *np);
+
+#endif
diff --git a/include/linux/of_videomode.h b/include/linux/of_videomode.h
new file mode 100644
index 0000000..4138758
--- /dev/null
+++ b/include/linux/of_videomode.h
@@ -0,0 +1,16 @@
+/*
+ * Copyright 2012 Steffen Trumtrar <s.trumtrar@pengutronix.de>
+ *
+ * videomode of-helpers
+ *
+ * This file is released under the GPLv2
+ */
+
+#ifndef __LINUX_OF_VIDEOMODE_H
+#define __LINUX_OF_VIDEOMODE_H
+
+#include <linux/videomode.h>
+#include <linux/of.h>
+
+int of_get_videomode(struct device_node *np, struct videomode *vm, int index);
+#endif /* __LINUX_OF_VIDEOMODE_H */
--
1.7.10.4
^ permalink raw reply related [flat|nested] 17+ messages in thread* Re: [PATCH v9 2/6] video: add of helper for videomode
2012-11-14 11:43 ` [PATCH v9 2/6] video: add of helper for videomode Steffen Trumtrar
@ 2012-11-14 12:00 ` Thierry Reding
2012-11-14 13:31 ` Steffen Trumtrar
[not found] ` <1352893403-21168-3-git-send-email-s.trumtrar-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
1 sibling, 1 reply; 17+ messages in thread
From: Thierry Reding @ 2012-11-14 12:00 UTC (permalink / raw)
To: Steffen Trumtrar
Cc: devicetree-discuss, Philipp Zabel, Rob Herring, linux-fbdev,
dri-devel, Laurent Pinchart, Guennady Liakhovetski, linux-media,
Tomi Valkeinen, Stephen Warren, kernel
[-- Attachment #1: Type: text/plain, Size: 3088 bytes --]
On Wed, Nov 14, 2012 at 12:43:19PM +0100, Steffen Trumtrar wrote:
[...]
> +display-timings bindings
> +========================
> +
> +display timings node
I didn't express myself very clearly here =). The way I think this
should be written is "display-timings node".
> +required properties:
> + - hactive, vactive: Display resolution
> + - hfront-porch, hback-porch, hsync-len: Horizontal Display timing parameters
> + in pixels
> + vfront-porch, vback-porch, vsync-len: Vertical display timing parameters in
> + lines
> + - clock-frequency: displayclock in Hz
I still think "displayclock" should be two words: "display clock".
> +/**
> + * of_get_display_timings - parse all display_timing entries from a device_node
> + * @np: device_node with the subnodes
> + **/
> +struct display_timings *of_get_display_timings(struct device_node *np)
> +{
[...]
> + disp->num_timings = 0;
> + disp->native_mode = 0;
> +
> + for_each_child_of_node(timings_np, entry) {
> + struct display_timing *dt;
> +
> + dt = of_get_display_timing(entry);
> + if (!dt) {
> + /* to not encourage wrong devicetrees, fail in case of an error */
> + pr_err("%s: error in timing %d\n", __func__, disp->num_timings+1);
> + goto timingfail;
I believe you're still potentially leaking memory here. In case you have
5 entries for instance, and the last one fails to parse, then this will
cause the memory allocated for the 4 correct entries to be lost.
Can't you just call display_timings_release() in this case and then jump
to dispfail? That would still leak the native_mode device node. Maybe it
would be better to keep timingfail but modify it to free the display
timings with display_timings_release() instead? See below.
> + }
> +
> + if (native_mode == entry)
> + disp->native_mode = disp->num_timings;
> +
> + disp->timings[disp->num_timings] = dt;
> + disp->num_timings++;
> + }
> + of_node_put(timings_np);
> + of_node_put(native_mode);
> +
> + if (disp->num_timings > 0)
> + pr_info("%s: got %d timings. Using timing #%d as default\n", __func__,
> + disp->num_timings , disp->native_mode + 1);
> + else {
> + pr_err("%s: no valid timings specified\n", __func__);
> + display_timings_release(disp);
> + return NULL;
> + }
> + return disp;
> +
> +timingfail:
> + if (native_mode)
> + of_node_put(native_mode);
> + kfree(disp->timings);
Call display_timings_release(disp) instead of kfree(disp->timings)?
> diff --git a/include/linux/of_videomode.h b/include/linux/of_videomode.h
> new file mode 100644
> index 0000000..4138758
> --- /dev/null
> +++ b/include/linux/of_videomode.h
> @@ -0,0 +1,16 @@
> +/*
> + * Copyright 2012 Steffen Trumtrar <s.trumtrar@pengutronix.de>
> + *
> + * videomode of-helpers
> + *
> + * This file is released under the GPLv2
> + */
> +
> +#ifndef __LINUX_OF_VIDEOMODE_H
> +#define __LINUX_OF_VIDEOMODE_H
> +
> +#include <linux/videomode.h>
> +#include <linux/of.h>
> +
> +int of_get_videomode(struct device_node *np, struct videomode *vm, int index);
> +#endif /* __LINUX_OF_VIDEOMODE_H */
Nit: should have a blank line before #endif.
Thierry
[-- Attachment #2: Type: application/pgp-signature, Size: 836 bytes --]
^ permalink raw reply [flat|nested] 17+ messages in thread* Re: [PATCH v9 2/6] video: add of helper for videomode
2012-11-14 12:00 ` Thierry Reding
@ 2012-11-14 13:31 ` Steffen Trumtrar
0 siblings, 0 replies; 17+ messages in thread
From: Steffen Trumtrar @ 2012-11-14 13:31 UTC (permalink / raw)
To: Thierry Reding
Cc: linux-fbdev, kernel, devicetree-discuss, dri-devel,
Tomi Valkeinen, Laurent Pinchart, Philipp Zabel,
Guennady Liakhovetski, linux-media
On Wed, Nov 14, 2012 at 01:00:45PM +0100, Thierry Reding wrote:
> On Wed, Nov 14, 2012 at 12:43:19PM +0100, Steffen Trumtrar wrote:
> [...]
> > +display-timings bindings
> > +============
> > +
> > +display timings node
>
> I didn't express myself very clearly here =). The way I think this
> should be written is "display-timings node".
>
> > +required properties:
> > + - hactive, vactive: Display resolution
> > + - hfront-porch, hback-porch, hsync-len: Horizontal Display timing parameters
> > + in pixels
> > + vfront-porch, vback-porch, vsync-len: Vertical display timing parameters in
> > + lines
> > + - clock-frequency: displayclock in Hz
>
> I still think "displayclock" should be two words: "display clock".
>
> > +/**
> > + * of_get_display_timings - parse all display_timing entries from a device_node
> > + * @np: device_node with the subnodes
> > + **/
> > +struct display_timings *of_get_display_timings(struct device_node *np)
> > +{
> [...]
> > + disp->num_timings = 0;
> > + disp->native_mode = 0;
> > +
> > + for_each_child_of_node(timings_np, entry) {
> > + struct display_timing *dt;
> > +
> > + dt = of_get_display_timing(entry);
> > + if (!dt) {
> > + /* to not encourage wrong devicetrees, fail in case of an error */
> > + pr_err("%s: error in timing %d\n", __func__, disp->num_timings+1);
> > + goto timingfail;
>
> I believe you're still potentially leaking memory here. In case you have
> 5 entries for instance, and the last one fails to parse, then this will
> cause the memory allocated for the 4 correct entries to be lost.
>
> Can't you just call display_timings_release() in this case and then jump
> to dispfail? That would still leak the native_mode device node. Maybe it
> would be better to keep timingfail but modify it to free the display
> timings with display_timings_release() instead? See below.
>
> > + }
> > +
> > + if (native_mode = entry)
> > + disp->native_mode = disp->num_timings;
> > +
> > + disp->timings[disp->num_timings] = dt;
> > + disp->num_timings++;
> > + }
> > + of_node_put(timings_np);
> > + of_node_put(native_mode);
> > +
> > + if (disp->num_timings > 0)
> > + pr_info("%s: got %d timings. Using timing #%d as default\n", __func__,
> > + disp->num_timings , disp->native_mode + 1);
> > + else {
> > + pr_err("%s: no valid timings specified\n", __func__);
> > + display_timings_release(disp);
> > + return NULL;
> > + }
> > + return disp;
> > +
> > +timingfail:
> > + if (native_mode)
> > + of_node_put(native_mode);
> > + kfree(disp->timings);
>
> Call display_timings_release(disp) instead of kfree(disp->timings)?
>
Yes. That would be the appropriate way to fail here. Done.
> > diff --git a/include/linux/of_videomode.h b/include/linux/of_videomode.h
> > new file mode 100644
> > index 0000000..4138758
> > --- /dev/null
> > +++ b/include/linux/of_videomode.h
> > @@ -0,0 +1,16 @@
> > +/*
> > + * Copyright 2012 Steffen Trumtrar <s.trumtrar@pengutronix.de>
> > + *
> > + * videomode of-helpers
> > + *
> > + * This file is released under the GPLv2
> > + */
> > +
> > +#ifndef __LINUX_OF_VIDEOMODE_H
> > +#define __LINUX_OF_VIDEOMODE_H
> > +
> > +#include <linux/videomode.h>
> > +#include <linux/of.h>
> > +
> > +int of_get_videomode(struct device_node *np, struct videomode *vm, int index);
> > +#endif /* __LINUX_OF_VIDEOMODE_H */
>
> Nit: should have a blank line before #endif.
>
> Thierry
> _______________________________________________
> devicetree-discuss mailing list
> devicetree-discuss@lists.ozlabs.org
> https://lists.ozlabs.org/listinfo/devicetree-discuss
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
^ permalink raw reply [flat|nested] 17+ messages in thread
[parent not found: <1352893403-21168-3-git-send-email-s.trumtrar-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>]
* Re: [PATCH v9 2/6] video: add of helper for videomode
[not found] ` <1352893403-21168-3-git-send-email-s.trumtrar-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
@ 2012-11-14 12:06 ` Thierry Reding
0 siblings, 0 replies; 17+ messages in thread
From: Thierry Reding @ 2012-11-14 12:06 UTC (permalink / raw)
To: Steffen Trumtrar
Cc: linux-fbdev-u79uwXL29TY76Z2rM5mHXA, kernel-bIcnvbaLZ9MEGnE8C9+IrQ,
devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ,
dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW, Tomi Valkeinen,
Laurent Pinchart, Philipp Zabel, Guennady Liakhovetski,
linux-media-u79uwXL29TY76Z2rM5mHXA
[-- Attachment #1: Type: text/plain, Size: 375 bytes --]
On Wed, Nov 14, 2012 at 12:43:19PM +0100, Steffen Trumtrar wrote:
[...]
> +optional properties:
> + - native-mode: the native mode for the display, in case multiple modes are
> + provided. When omitted, assume the first node is the native.
I forgot: The first sentence in this description should also start with
a capital letter as you terminate with a full stop.
Thierry
[-- Attachment #2: Type: application/pgp-signature, Size: 836 bytes --]
^ permalink raw reply [flat|nested] 17+ messages in thread
* [PATCH v9 3/6] fbmon: add videomode helpers
2012-11-14 11:43 [PATCH v9 0/6] of: add display helper Steffen Trumtrar
2012-11-14 11:43 ` [PATCH v9 1/6] video: add display_timing and videomode Steffen Trumtrar
2012-11-14 11:43 ` [PATCH v9 2/6] video: add of helper for videomode Steffen Trumtrar
@ 2012-11-14 11:43 ` Steffen Trumtrar
2012-11-14 12:12 ` Thierry Reding
2012-11-14 11:43 ` [PATCH v9 4/6] fbmon: add of_videomode helpers Steffen Trumtrar
` (2 subsequent siblings)
5 siblings, 1 reply; 17+ messages in thread
From: Steffen Trumtrar @ 2012-11-14 11:43 UTC (permalink / raw)
To: devicetree-discuss
Cc: Steffen Trumtrar, Rob Herring, linux-fbdev, dri-devel,
Laurent Pinchart, Thierry Reding, Guennady Liakhovetski,
linux-media, Tomi Valkeinen, Stephen Warren, kernel
Add a function to convert from the generic videomode to a fb_videomode.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
---
drivers/video/fbmon.c | 38 ++++++++++++++++++++++++++++++++++++++
include/linux/fb.h | 5 +++++
2 files changed, 43 insertions(+)
diff --git a/drivers/video/fbmon.c b/drivers/video/fbmon.c
index cef6557..cccef17 100644
--- a/drivers/video/fbmon.c
+++ b/drivers/video/fbmon.c
@@ -31,6 +31,7 @@
#include <linux/pci.h>
#include <linux/slab.h>
#include <video/edid.h>
+#include <linux/videomode.h>
#ifdef CONFIG_PPC_OF
#include <asm/prom.h>
#include <asm/pci-bridge.h>
@@ -1373,6 +1374,43 @@ int fb_get_mode(int flags, u32 val, struct fb_var_screeninfo *var, struct fb_inf
kfree(timings);
return err;
}
+
+#if IS_ENABLED(CONFIG_VIDEOMODE)
+int fb_videomode_from_videomode(struct videomode *vm, struct fb_videomode *fbmode)
+{
+ fbmode->xres = vm->hactive;
+ fbmode->left_margin = vm->hback_porch;
+ fbmode->right_margin = vm->hfront_porch;
+ fbmode->hsync_len = vm->hsync_len;
+
+ fbmode->yres = vm->vactive;
+ fbmode->upper_margin = vm->vback_porch;
+ fbmode->lower_margin = vm->vfront_porch;
+ fbmode->vsync_len = vm->vsync_len;
+
+ fbmode->pixclock = KHZ2PICOS(vm->pixelclock / 1000);
+
+ fbmode->sync = 0;
+ fbmode->vmode = 0;
+ if (vm->hah)
+ fbmode->sync |= FB_SYNC_HOR_HIGH_ACT;
+ if (vm->vah)
+ fbmode->sync |= FB_SYNC_VERT_HIGH_ACT;
+ if (vm->interlaced)
+ fbmode->vmode |= FB_VMODE_INTERLACED;
+ if (vm->doublescan)
+ fbmode->vmode |= FB_VMODE_DOUBLE;
+ if (vm->de)
+ fbmode->sync |= FB_SYNC_DATA_ENABLE_HIGH_ACT;
+ fbmode->refresh = (vm->pixelclock*1000) / (vm->hactive * vm->vactive);
+ fbmode->flag = 0;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(fb_videomode_from_videomode);
+#endif
+
+
#else
int fb_parse_edid(unsigned char *edid, struct fb_var_screeninfo *var)
{
diff --git a/include/linux/fb.h b/include/linux/fb.h
index c7a9571..6a3a675 100644
--- a/include/linux/fb.h
+++ b/include/linux/fb.h
@@ -14,6 +14,7 @@
#include <linux/backlight.h>
#include <linux/slab.h>
#include <asm/io.h>
+#include <linux/videomode.h>
struct vm_area_struct;
struct fb_info;
@@ -714,6 +715,10 @@ extern void fb_destroy_modedb(struct fb_videomode *modedb);
extern int fb_find_mode_cvt(struct fb_videomode *mode, int margins, int rb);
extern unsigned char *fb_ddc_read(struct i2c_adapter *adapter);
+#if IS_ENABLED(CONFIG_VIDEOMODE)
+extern int fb_videomode_from_videomode(struct videomode *vm,
+ struct fb_videomode *fbmode);
+#endif
/* drivers/video/modedb.c */
#define VESA_MODEDB_SIZE 34
extern void fb_var_to_videomode(struct fb_videomode *mode,
--
1.7.10.4
^ permalink raw reply related [flat|nested] 17+ messages in thread* Re: [PATCH v9 3/6] fbmon: add videomode helpers
2012-11-14 11:43 ` [PATCH v9 3/6] fbmon: add videomode helpers Steffen Trumtrar
@ 2012-11-14 12:12 ` Thierry Reding
2012-11-14 14:06 ` Steffen Trumtrar
0 siblings, 1 reply; 17+ messages in thread
From: Thierry Reding @ 2012-11-14 12:12 UTC (permalink / raw)
To: Steffen Trumtrar
Cc: devicetree-discuss, Rob Herring, linux-fbdev, dri-devel,
Laurent Pinchart, Guennady Liakhovetski, linux-media,
Tomi Valkeinen, Stephen Warren, kernel
[-- Attachment #1: Type: text/plain, Size: 3383 bytes --]
On Wed, Nov 14, 2012 at 12:43:20PM +0100, Steffen Trumtrar wrote:
> Add a function to convert from the generic videomode to a fb_videomode.
>
> Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
> ---
> drivers/video/fbmon.c | 38 ++++++++++++++++++++++++++++++++++++++
> include/linux/fb.h | 5 +++++
> 2 files changed, 43 insertions(+)
>
> diff --git a/drivers/video/fbmon.c b/drivers/video/fbmon.c
> index cef6557..cccef17 100644
> --- a/drivers/video/fbmon.c
> +++ b/drivers/video/fbmon.c
> @@ -31,6 +31,7 @@
> #include <linux/pci.h>
> #include <linux/slab.h>
> #include <video/edid.h>
> +#include <linux/videomode.h>
> #ifdef CONFIG_PPC_OF
> #include <asm/prom.h>
> #include <asm/pci-bridge.h>
> @@ -1373,6 +1374,43 @@ int fb_get_mode(int flags, u32 val, struct fb_var_screeninfo *var, struct fb_inf
> kfree(timings);
> return err;
> }
> +
> +#if IS_ENABLED(CONFIG_VIDEOMODE)
> +int fb_videomode_from_videomode(struct videomode *vm, struct fb_videomode *fbmode)
> +{
> + fbmode->xres = vm->hactive;
> + fbmode->left_margin = vm->hback_porch;
> + fbmode->right_margin = vm->hfront_porch;
> + fbmode->hsync_len = vm->hsync_len;
> +
> + fbmode->yres = vm->vactive;
> + fbmode->upper_margin = vm->vback_porch;
> + fbmode->lower_margin = vm->vfront_porch;
> + fbmode->vsync_len = vm->vsync_len;
> +
> + fbmode->pixclock = KHZ2PICOS(vm->pixelclock / 1000);
> +
> + fbmode->sync = 0;
> + fbmode->vmode = 0;
> + if (vm->hah)
> + fbmode->sync |= FB_SYNC_HOR_HIGH_ACT;
> + if (vm->vah)
> + fbmode->sync |= FB_SYNC_VERT_HIGH_ACT;
> + if (vm->interlaced)
> + fbmode->vmode |= FB_VMODE_INTERLACED;
> + if (vm->doublescan)
> + fbmode->vmode |= FB_VMODE_DOUBLE;
> + if (vm->de)
> + fbmode->sync |= FB_SYNC_DATA_ENABLE_HIGH_ACT;
> + fbmode->refresh = (vm->pixelclock*1000) / (vm->hactive * vm->vactive);
CodingStyle that you should have spaces around '*'. Also I'm not sure if
that formula is correct. Shouldn't the blanking intervals be counted as
well? So:
unsigned int htotal = vm->hactive + vm->hfront_porch +
vm->hback_porch + vm->hsync_len;
unsigned int vtotal = vm->vactive + vm->vfront_porch +
vm->vback_porch + vm->vsync_len;
fbmode->refresh = (vm->pixelclock * 1000) / (htotal * vtotal);
?
> + fbmode->flag = 0;
> +
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(fb_videomode_from_videomode);
> +#endif
> +
> +
Gratuitous blank line.
> #else
> int fb_parse_edid(unsigned char *edid, struct fb_var_screeninfo *var)
> {
> diff --git a/include/linux/fb.h b/include/linux/fb.h
> index c7a9571..6a3a675 100644
> --- a/include/linux/fb.h
> +++ b/include/linux/fb.h
> @@ -14,6 +14,7 @@
> #include <linux/backlight.h>
> #include <linux/slab.h>
> #include <asm/io.h>
> +#include <linux/videomode.h>
>
> struct vm_area_struct;
> struct fb_info;
> @@ -714,6 +715,10 @@ extern void fb_destroy_modedb(struct fb_videomode *modedb);
> extern int fb_find_mode_cvt(struct fb_videomode *mode, int margins, int rb);
> extern unsigned char *fb_ddc_read(struct i2c_adapter *adapter);
>
> +#if IS_ENABLED(CONFIG_VIDEOMODE)
> +extern int fb_videomode_from_videomode(struct videomode *vm,
> + struct fb_videomode *fbmode);
> +#endif
> /* drivers/video/modedb.c */
These in turn could use an extra blank line.
Thierry
[-- Attachment #2: Type: application/pgp-signature, Size: 836 bytes --]
^ permalink raw reply [flat|nested] 17+ messages in thread* Re: [PATCH v9 3/6] fbmon: add videomode helpers
2012-11-14 12:12 ` Thierry Reding
@ 2012-11-14 14:06 ` Steffen Trumtrar
0 siblings, 0 replies; 17+ messages in thread
From: Steffen Trumtrar @ 2012-11-14 14:06 UTC (permalink / raw)
To: Thierry Reding
Cc: linux-fbdev, devicetree-discuss, dri-devel, Tomi Valkeinen,
Laurent Pinchart, kernel, Guennady Liakhovetski, linux-media
On Wed, Nov 14, 2012 at 01:12:07PM +0100, Thierry Reding wrote:
> On Wed, Nov 14, 2012 at 12:43:20PM +0100, Steffen Trumtrar wrote:
> > Add a function to convert from the generic videomode to a fb_videomode.
> >
> > Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
> > ---
> > drivers/video/fbmon.c | 38 ++++++++++++++++++++++++++++++++++++++
> > include/linux/fb.h | 5 +++++
> > 2 files changed, 43 insertions(+)
> >
> > diff --git a/drivers/video/fbmon.c b/drivers/video/fbmon.c
> > index cef6557..cccef17 100644
> > --- a/drivers/video/fbmon.c
> > +++ b/drivers/video/fbmon.c
> > @@ -31,6 +31,7 @@
> > #include <linux/pci.h>
> > #include <linux/slab.h>
> > #include <video/edid.h>
> > +#include <linux/videomode.h>
> > #ifdef CONFIG_PPC_OF
> > #include <asm/prom.h>
> > #include <asm/pci-bridge.h>
> > @@ -1373,6 +1374,43 @@ int fb_get_mode(int flags, u32 val, struct fb_var_screeninfo *var, struct fb_inf
> > kfree(timings);
> > return err;
> > }
> > +
> > +#if IS_ENABLED(CONFIG_VIDEOMODE)
> > +int fb_videomode_from_videomode(struct videomode *vm, struct fb_videomode *fbmode)
> > +{
> > + fbmode->xres = vm->hactive;
> > + fbmode->left_margin = vm->hback_porch;
> > + fbmode->right_margin = vm->hfront_porch;
> > + fbmode->hsync_len = vm->hsync_len;
> > +
> > + fbmode->yres = vm->vactive;
> > + fbmode->upper_margin = vm->vback_porch;
> > + fbmode->lower_margin = vm->vfront_porch;
> > + fbmode->vsync_len = vm->vsync_len;
> > +
> > + fbmode->pixclock = KHZ2PICOS(vm->pixelclock / 1000);
> > +
> > + fbmode->sync = 0;
> > + fbmode->vmode = 0;
> > + if (vm->hah)
> > + fbmode->sync |= FB_SYNC_HOR_HIGH_ACT;
> > + if (vm->vah)
> > + fbmode->sync |= FB_SYNC_VERT_HIGH_ACT;
> > + if (vm->interlaced)
> > + fbmode->vmode |= FB_VMODE_INTERLACED;
> > + if (vm->doublescan)
> > + fbmode->vmode |= FB_VMODE_DOUBLE;
> > + if (vm->de)
> > + fbmode->sync |= FB_SYNC_DATA_ENABLE_HIGH_ACT;
> > + fbmode->refresh = (vm->pixelclock*1000) / (vm->hactive * vm->vactive);
>
> CodingStyle that you should have spaces around '*'. Also I'm not sure if
> that formula is correct. Shouldn't the blanking intervals be counted as
> well? So:
>
> unsigned int htotal = vm->hactive + vm->hfront_porch +
> vm->hback_porch + vm->hsync_len;
> unsigned int vtotal = vm->vactive + vm->vfront_porch +
> vm->vback_porch + vm->vsync_len;
>
> fbmode->refresh = (vm->pixelclock * 1000) / (htotal * vtotal);
>
> ?
>
Sounds correct. Done.
> > + fbmode->flag = 0;
> > +
> > + return 0;
> > +}
> > +EXPORT_SYMBOL_GPL(fb_videomode_from_videomode);
> > +#endif
> > +
> > +
>
> Gratuitous blank line.
>
> > #else
> > int fb_parse_edid(unsigned char *edid, struct fb_var_screeninfo *var)
> > {
> > diff --git a/include/linux/fb.h b/include/linux/fb.h
> > index c7a9571..6a3a675 100644
> > --- a/include/linux/fb.h
> > +++ b/include/linux/fb.h
> > @@ -14,6 +14,7 @@
> > #include <linux/backlight.h>
> > #include <linux/slab.h>
> > #include <asm/io.h>
> > +#include <linux/videomode.h>
> >
> > struct vm_area_struct;
> > struct fb_info;
> > @@ -714,6 +715,10 @@ extern void fb_destroy_modedb(struct fb_videomode *modedb);
> > extern int fb_find_mode_cvt(struct fb_videomode *mode, int margins, int rb);
> > extern unsigned char *fb_ddc_read(struct i2c_adapter *adapter);
> >
> > +#if IS_ENABLED(CONFIG_VIDEOMODE)
> > +extern int fb_videomode_from_videomode(struct videomode *vm,
> > + struct fb_videomode *fbmode);
> > +#endif
> > /* drivers/video/modedb.c */
>
> These in turn could use an extra blank line.
>
> Thierry
> _______________________________________________
> devicetree-discuss mailing list
> devicetree-discuss@lists.ozlabs.org
> https://lists.ozlabs.org/listinfo/devicetree-discuss
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
^ permalink raw reply [flat|nested] 17+ messages in thread
* [PATCH v9 4/6] fbmon: add of_videomode helpers
2012-11-14 11:43 [PATCH v9 0/6] of: add display helper Steffen Trumtrar
` (2 preceding siblings ...)
2012-11-14 11:43 ` [PATCH v9 3/6] fbmon: add videomode helpers Steffen Trumtrar
@ 2012-11-14 11:43 ` Steffen Trumtrar
2012-11-14 12:47 ` Thierry Reding
2012-11-14 11:43 ` [PATCH v9 5/6] drm_modes: add videomode helpers Steffen Trumtrar
2012-11-14 11:43 ` [PATCH v9 6/6] drm_modes: add of_videomode helpers Steffen Trumtrar
5 siblings, 1 reply; 17+ messages in thread
From: Steffen Trumtrar @ 2012-11-14 11:43 UTC (permalink / raw)
To: devicetree-discuss
Cc: Steffen Trumtrar, Rob Herring, linux-fbdev, dri-devel,
Laurent Pinchart, Thierry Reding, Guennady Liakhovetski,
linux-media, Tomi Valkeinen, Stephen Warren, kernel
Add helper to get fb_videomode from devicetree.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
---
drivers/video/fbmon.c | 42 +++++++++++++++++++++++++++++++++++++++++-
include/linux/fb.h | 6 ++++++
2 files changed, 47 insertions(+), 1 deletion(-)
diff --git a/drivers/video/fbmon.c b/drivers/video/fbmon.c
index cccef17..3a48abd 100644
--- a/drivers/video/fbmon.c
+++ b/drivers/video/fbmon.c
@@ -31,7 +31,7 @@
#include <linux/pci.h>
#include <linux/slab.h>
#include <video/edid.h>
-#include <linux/videomode.h>
+#include <linux/of_videomode.h>
#ifdef CONFIG_PPC_OF
#include <asm/prom.h>
#include <asm/pci-bridge.h>
@@ -1410,6 +1410,46 @@ int fb_videomode_from_videomode(struct videomode *vm, struct fb_videomode *fbmod
EXPORT_SYMBOL_GPL(fb_videomode_from_videomode);
#endif
+#if IS_ENABLED(CONFIG_OF_VIDEOMODE)
+static void dump_fb_videomode(struct fb_videomode *m)
+{
+ pr_debug("fb_videomode = %ux%u@%uHz (%ukHz) %u %u %u %u %u %u %u %u %u\n",
+ m->xres, m->yres, m->refresh, m->pixclock, m->left_margin,
+ m->right_margin, m->upper_margin, m->lower_margin,
+ m->hsync_len, m->vsync_len, m->sync, m->vmode, m->flag);
+}
+
+/**
+ * of_get_fb_videomode - get a fb_videomode from devicetree
+ * @np: device_node with the timing specification
+ * @fb: will be set to the return value
+ * @index: index into the list of display timings in devicetree
+ *
+ * DESCRIPTION:
+ * This function is expensive and should only be used, if only one mode is to be
+ * read from DT. To get multiple modes start with of_get_display_timings ond
+ * work with that instead.
+ */
+int of_get_fb_videomode(struct device_node *np, struct fb_videomode *fb,
+ unsigned int index)
+{
+ struct videomode vm;
+ int ret;
+
+ ret = of_get_videomode(np, &vm, index);
+ if (ret)
+ return ret;
+
+ fb_videomode_from_videomode(&vm, fb);
+
+ pr_info("%s: got %dx%d display mode from %s\n", __func__, vm.hactive,
+ vm.vactive, np->name);
+ dump_fb_videomode(fb);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(of_get_fb_videomode);
+#endif
#else
int fb_parse_edid(unsigned char *edid, struct fb_var_screeninfo *var)
diff --git a/include/linux/fb.h b/include/linux/fb.h
index 6a3a675..8aeece8 100644
--- a/include/linux/fb.h
+++ b/include/linux/fb.h
@@ -15,6 +15,8 @@
#include <linux/slab.h>
#include <asm/io.h>
#include <linux/videomode.h>
+#include <linux/of.h>
+#include <linux/of_videomode.h>
struct vm_area_struct;
struct fb_info;
@@ -715,6 +717,10 @@ extern void fb_destroy_modedb(struct fb_videomode *modedb);
extern int fb_find_mode_cvt(struct fb_videomode *mode, int margins, int rb);
extern unsigned char *fb_ddc_read(struct i2c_adapter *adapter);
+#if IS_ENABLED(CONFIG_OF_VIDEOMODE)
+extern int of_get_fb_videomode(struct device_node *np, struct fb_videomode *fb,
+ unsigned int index);
+#endif
#if IS_ENABLED(CONFIG_VIDEOMODE)
extern int fb_videomode_from_videomode(struct videomode *vm,
struct fb_videomode *fbmode);
--
1.7.10.4
^ permalink raw reply related [flat|nested] 17+ messages in thread* Re: [PATCH v9 4/6] fbmon: add of_videomode helpers
2012-11-14 11:43 ` [PATCH v9 4/6] fbmon: add of_videomode helpers Steffen Trumtrar
@ 2012-11-14 12:47 ` Thierry Reding
0 siblings, 0 replies; 17+ messages in thread
From: Thierry Reding @ 2012-11-14 12:47 UTC (permalink / raw)
To: Steffen Trumtrar
Cc: devicetree-discuss, Rob Herring, linux-fbdev, dri-devel,
Laurent Pinchart, Guennady Liakhovetski, linux-media,
Tomi Valkeinen, Stephen Warren, kernel
[-- Attachment #1: Type: text/plain, Size: 260 bytes --]
On Wed, Nov 14, 2012 at 12:43:21PM +0100, Steffen Trumtrar wrote:
[...]
> diff --git a/drivers/video/fbmon.c b/drivers/video/fbmon.c
[...]
> +#if IS_ENABLED(CONFIG_OF_VIDEOMODE)
> +static void dump_fb_videomode(struct fb_videomode *m)
static inline?
Thierry
[-- Attachment #2: Type: application/pgp-signature, Size: 836 bytes --]
^ permalink raw reply [flat|nested] 17+ messages in thread
* [PATCH v9 5/6] drm_modes: add videomode helpers
2012-11-14 11:43 [PATCH v9 0/6] of: add display helper Steffen Trumtrar
` (3 preceding siblings ...)
2012-11-14 11:43 ` [PATCH v9 4/6] fbmon: add of_videomode helpers Steffen Trumtrar
@ 2012-11-14 11:43 ` Steffen Trumtrar
2012-11-14 12:49 ` Thierry Reding
2012-11-14 11:43 ` [PATCH v9 6/6] drm_modes: add of_videomode helpers Steffen Trumtrar
5 siblings, 1 reply; 17+ messages in thread
From: Steffen Trumtrar @ 2012-11-14 11:43 UTC (permalink / raw)
To: devicetree-discuss
Cc: Steffen Trumtrar, Rob Herring, linux-fbdev, dri-devel,
Laurent Pinchart, Thierry Reding, Guennady Liakhovetski,
linux-media, Tomi Valkeinen, Stephen Warren, kernel
Add conversion from videomode to drm_display_mode
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
---
drivers/gpu/drm/drm_modes.c | 36 ++++++++++++++++++++++++++++++++++++
include/drm/drmP.h | 6 ++++++
2 files changed, 42 insertions(+)
diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index 59450f3..42ea099 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -35,6 +35,7 @@
#include <linux/export.h>
#include <drm/drmP.h>
#include <drm/drm_crtc.h>
+#include <linux/videomode.h>
/**
* drm_mode_debug_printmodeline - debug print a mode
@@ -504,6 +505,41 @@ drm_gtf_mode(struct drm_device *dev, int hdisplay, int vdisplay, int vrefresh,
}
EXPORT_SYMBOL(drm_gtf_mode);
+#if IS_ENABLED(CONFIG_VIDEOMODE)
+int display_mode_from_videomode(struct videomode *vm, struct drm_display_mode *dmode)
+{
+ dmode->hdisplay = vm->hactive;
+ dmode->hsync_start = dmode->hdisplay + vm->hfront_porch;
+ dmode->hsync_end = dmode->hsync_start + vm->hsync_len;
+ dmode->htotal = dmode->hsync_end + vm->hback_porch;
+
+ dmode->vdisplay = vm->vactive;
+ dmode->vsync_start = dmode->vdisplay + vm->vfront_porch;
+ dmode->vsync_end = dmode->vsync_start + vm->vsync_len;
+ dmode->vtotal = dmode->vsync_end + vm->vback_porch;
+
+ dmode->clock = vm->pixelclock / 1000;
+
+ dmode->flags = 0;
+ if (vm->hah)
+ dmode->flags |= DRM_MODE_FLAG_PHSYNC;
+ else
+ dmode->flags |= DRM_MODE_FLAG_NHSYNC;
+ if (vm->vah)
+ dmode->flags |= DRM_MODE_FLAG_PVSYNC;
+ else
+ dmode->flags |= DRM_MODE_FLAG_NVSYNC;
+ if (vm->interlaced)
+ dmode->flags |= DRM_MODE_FLAG_INTERLACE;
+ if (vm->doublescan)
+ dmode->flags |= DRM_MODE_FLAG_DBLSCAN;
+ drm_mode_set_name(dmode);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(display_mode_from_videomode);
+#endif
+
/**
* drm_mode_set_name - set the name on a mode
* @mode: name will be set in this mode
diff --git a/include/drm/drmP.h b/include/drm/drmP.h
index 3fd8280..1e0d846 100644
--- a/include/drm/drmP.h
+++ b/include/drm/drmP.h
@@ -56,6 +56,7 @@
#include <linux/cdev.h>
#include <linux/mutex.h>
#include <linux/slab.h>
+#include <linux/videomode.h>
#if defined(__alpha__) || defined(__powerpc__)
#include <asm/pgtable.h> /* For pte_wrprotect */
#endif
@@ -1454,6 +1455,11 @@ extern struct drm_display_mode *
drm_mode_create_from_cmdline_mode(struct drm_device *dev,
struct drm_cmdline_mode *cmd);
+#if IS_ENABLED(CONFIG_VIDEOMODE)
+extern int display_mode_from_videomode(struct videomode *vm,
+ struct drm_display_mode *dmode);
+#endif
+
/* Modesetting support */
extern void drm_vblank_pre_modeset(struct drm_device *dev, int crtc);
extern void drm_vblank_post_modeset(struct drm_device *dev, int crtc);
--
1.7.10.4
^ permalink raw reply related [flat|nested] 17+ messages in thread* Re: [PATCH v9 5/6] drm_modes: add videomode helpers
2012-11-14 11:43 ` [PATCH v9 5/6] drm_modes: add videomode helpers Steffen Trumtrar
@ 2012-11-14 12:49 ` Thierry Reding
2012-11-14 14:18 ` Steffen Trumtrar
0 siblings, 1 reply; 17+ messages in thread
From: Thierry Reding @ 2012-11-14 12:49 UTC (permalink / raw)
To: Steffen Trumtrar
Cc: devicetree-discuss, Rob Herring, linux-fbdev, dri-devel,
Laurent Pinchart, Guennady Liakhovetski, linux-media,
Tomi Valkeinen, Stephen Warren, kernel
[-- Attachment #1: Type: text/plain, Size: 596 bytes --]
On Wed, Nov 14, 2012 at 12:43:22PM +0100, Steffen Trumtrar wrote:
[...]
> diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
[...]
> @@ -504,6 +505,41 @@ drm_gtf_mode(struct drm_device *dev, int hdisplay, int vdisplay, int vrefresh,
> }
> EXPORT_SYMBOL(drm_gtf_mode);
>
> +#if IS_ENABLED(CONFIG_VIDEOMODE)
> +int display_mode_from_videomode(struct videomode *vm, struct drm_display_mode *dmode)
Given that this is still a DRM core function, maybe it should get a drm_
prefix? Also the line is too long, so you may want to wrap the argument
list.
Thierry
[-- Attachment #2: Type: application/pgp-signature, Size: 836 bytes --]
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH v9 5/6] drm_modes: add videomode helpers
2012-11-14 12:49 ` Thierry Reding
@ 2012-11-14 14:18 ` Steffen Trumtrar
0 siblings, 0 replies; 17+ messages in thread
From: Steffen Trumtrar @ 2012-11-14 14:18 UTC (permalink / raw)
To: Thierry Reding
Cc: devicetree-discuss, Rob Herring, linux-fbdev, dri-devel,
Laurent Pinchart, Guennady Liakhovetski, linux-media,
Tomi Valkeinen, Stephen Warren, kernel
On Wed, Nov 14, 2012 at 01:49:44PM +0100, Thierry Reding wrote:
> On Wed, Nov 14, 2012 at 12:43:22PM +0100, Steffen Trumtrar wrote:
> [...]
> > diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
> [...]
> > @@ -504,6 +505,41 @@ drm_gtf_mode(struct drm_device *dev, int hdisplay, int vdisplay, int vrefresh,
> > }
> > EXPORT_SYMBOL(drm_gtf_mode);
> >
> > +#if IS_ENABLED(CONFIG_VIDEOMODE)
> > +int display_mode_from_videomode(struct videomode *vm, struct drm_display_mode *dmode)
>
> Given that this is still a DRM core function, maybe it should get a drm_
> prefix? Also the line is too long, so you may want to wrap the argument
> list.
>
> Thierry
Yes, seems to fit better to the rest of the file.
Regards,
Steffen
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
^ permalink raw reply [flat|nested] 17+ messages in thread
* [PATCH v9 6/6] drm_modes: add of_videomode helpers
2012-11-14 11:43 [PATCH v9 0/6] of: add display helper Steffen Trumtrar
` (4 preceding siblings ...)
2012-11-14 11:43 ` [PATCH v9 5/6] drm_modes: add videomode helpers Steffen Trumtrar
@ 2012-11-14 11:43 ` Steffen Trumtrar
2012-11-14 12:51 ` Thierry Reding
5 siblings, 1 reply; 17+ messages in thread
From: Steffen Trumtrar @ 2012-11-14 11:43 UTC (permalink / raw)
To: devicetree-discuss
Cc: Steffen Trumtrar, Rob Herring, linux-fbdev, dri-devel,
Laurent Pinchart, Thierry Reding, Guennady Liakhovetski,
linux-media, Tomi Valkeinen, Stephen Warren, kernel
Add helper to get drm_display_mode from devicetree.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
---
drivers/gpu/drm/drm_modes.c | 35 ++++++++++++++++++++++++++++++++++-
include/drm/drmP.h | 6 ++++++
2 files changed, 40 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index 42ea099..c3ae5d2 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -35,7 +35,8 @@
#include <linux/export.h>
#include <drm/drmP.h>
#include <drm/drm_crtc.h>
-#include <linux/videomode.h>
+#include <linux/of.h>
+#include <linux/of_videomode.h>
/**
* drm_mode_debug_printmodeline - debug print a mode
@@ -540,6 +541,38 @@ int display_mode_from_videomode(struct videomode *vm, struct drm_display_mode *d
EXPORT_SYMBOL_GPL(display_mode_from_videomode);
#endif
+#if IS_ENABLED(CONFIG_OF_VIDEOMODE)
+/**
+ * of_get_drm_display_mode - get a drm_display_mode from devicetree
+ * @np: device_node with the timing specification
+ * @dmode: will be set to the return value
+ * @index: index into the list of display timings in devicetree
+ *
+ * This function is expensive and should only be used, if only one mode is to be
+ * read from DT. To get multiple modes start with of_get_display_timings and
+ * work with that instead.
+ */
+int of_get_drm_display_mode(struct device_node *np, struct drm_display_mode *dmode,
+ unsigned int index)
+{
+ struct videomode vm;
+ int ret;
+
+ ret = of_get_videomode(np, &vm, index);
+ if (ret)
+ return ret;
+
+ display_mode_from_videomode(&vm, dmode);
+
+ pr_info("%s: got %dx%d display mode from %s\n", __func__, vm.hactive,
+ vm.vactive, np->name);
+ drm_mode_debug_printmodeline(dmode);
+
+ return 0;
+
+}
+EXPORT_SYMBOL_GPL(of_get_drm_display_mode);
+#endif
/**
* drm_mode_set_name - set the name on a mode
* @mode: name will be set in this mode
diff --git a/include/drm/drmP.h b/include/drm/drmP.h
index 1e0d846..e8f46a1 100644
--- a/include/drm/drmP.h
+++ b/include/drm/drmP.h
@@ -56,6 +56,7 @@
#include <linux/cdev.h>
#include <linux/mutex.h>
#include <linux/slab.h>
+#include <linux/of.h>
#include <linux/videomode.h>
#if defined(__alpha__) || defined(__powerpc__)
#include <asm/pgtable.h> /* For pte_wrprotect */
@@ -1459,6 +1460,11 @@ drm_mode_create_from_cmdline_mode(struct drm_device *dev,
extern int display_mode_from_videomode(struct videomode *vm,
struct drm_display_mode *dmode);
#endif
+#if IS_ENABLED(CONFIG_OF_VIDEOMODE)
+extern int of_get_drm_display_mode(struct device_node *np,
+ struct drm_display_mode *dmode,
+ unsigned int index);
+#endif
/* Modesetting support */
extern void drm_vblank_pre_modeset(struct drm_device *dev, int crtc);
--
1.7.10.4
^ permalink raw reply related [flat|nested] 17+ messages in thread* Re: [PATCH v9 6/6] drm_modes: add of_videomode helpers
2012-11-14 11:43 ` [PATCH v9 6/6] drm_modes: add of_videomode helpers Steffen Trumtrar
@ 2012-11-14 12:51 ` Thierry Reding
0 siblings, 0 replies; 17+ messages in thread
From: Thierry Reding @ 2012-11-14 12:51 UTC (permalink / raw)
To: Steffen Trumtrar
Cc: devicetree-discuss, Rob Herring, linux-fbdev, dri-devel,
Laurent Pinchart, Guennady Liakhovetski, linux-media,
Tomi Valkeinen, Stephen Warren, kernel
[-- Attachment #1: Type: text/plain, Size: 202 bytes --]
On Wed, Nov 14, 2012 at 12:43:23PM +0100, Steffen Trumtrar wrote:
[...]
> +EXPORT_SYMBOL_GPL(of_get_drm_display_mode);
> +#endif
> /**
Nit: there should be a blank line between the last two.
Thierry
[-- Attachment #2: Type: application/pgp-signature, Size: 836 bytes --]
^ permalink raw reply [flat|nested] 17+ messages in thread