From: Steffen Trumtrar <s.trumtrar@pengutronix.de>
To: devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org
Cc: linux-fbdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
David Airlie <airlied-cv59FeDIM0c@public.gmane.org>,
Florian Tobias Schandinat
<FlorianSchandinat-Mmb7MZpHnFY@public.gmane.org>,
dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org,
Tomi Valkeinen <tomi.valkeinen-l0cyMroinI0@public.gmane.org>,
Laurent Pinchart
<laurent.pinchart-ryLnwIuWjnjg/C1BVhZhaw@public.gmane.org>,
kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org,
Guennady Liakhovetski
<g.liakhovetski-Mmb7MZpHnFY@public.gmane.org>,
linux-media-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: [PATCHv13 4/7] fbmon: add videomode helpers
Date: Thu, 22 Nov 2012 16:00:12 +0000 [thread overview]
Message-ID: <1353600015-6974-5-git-send-email-s.trumtrar@pengutronix.de> (raw)
In-Reply-To: <1353600015-6974-1-git-send-email-s.trumtrar-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Add a function to convert from the generic videomode to a fb_videomode.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de>
Acked-by: Thierry Reding <thierry.reding@avionic-design.de>
Tested-by: Thierry Reding <thierry.reding@avionic-design.de>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
---
drivers/video/fbmon.c | 44 ++++++++++++++++++++++++++++++++++++++++++++
include/linux/fb.h | 6 ++++++
2 files changed, 50 insertions(+)
diff --git a/drivers/video/fbmon.c b/drivers/video/fbmon.c
index cef6557..a6a564d 100644
--- a/drivers/video/fbmon.c
+++ b/drivers/video/fbmon.c
@@ -31,6 +31,7 @@
#include <linux/pci.h>
#include <linux/slab.h>
#include <video/edid.h>
+#include <linux/videomode.h>
#ifdef CONFIG_PPC_OF
#include <asm/prom.h>
#include <asm/pci-bridge.h>
@@ -1373,6 +1374,49 @@ int fb_get_mode(int flags, u32 val, struct fb_var_screeninfo *var, struct fb_inf
kfree(timings);
return err;
}
+
+#if IS_ENABLED(CONFIG_VIDEOMODE)
+int fb_videomode_from_videomode(const struct videomode *vm,
+ struct fb_videomode *fbmode)
+{
+ unsigned int htotal, vtotal;
+
+ fbmode->xres = vm->hactive;
+ fbmode->left_margin = vm->hback_porch;
+ fbmode->right_margin = vm->hfront_porch;
+ fbmode->hsync_len = vm->hsync_len;
+
+ fbmode->yres = vm->vactive;
+ fbmode->upper_margin = vm->vback_porch;
+ fbmode->lower_margin = vm->vfront_porch;
+ fbmode->vsync_len = vm->vsync_len;
+
+ fbmode->pixclock = KHZ2PICOS(vm->pixelclock / 1000);
+
+ fbmode->sync = 0;
+ fbmode->vmode = 0;
+ if (vm->hah)
+ fbmode->sync |= FB_SYNC_HOR_HIGH_ACT;
+ if (vm->vah)
+ fbmode->sync |= FB_SYNC_VERT_HIGH_ACT;
+ if (vm->interlaced)
+ fbmode->vmode |= FB_VMODE_INTERLACED;
+ if (vm->doublescan)
+ fbmode->vmode |= FB_VMODE_DOUBLE;
+ fbmode->flag = 0;
+
+ htotal = vm->hactive + vm->hfront_porch + vm->hback_porch +
+ vm->hsync_len;
+ vtotal = vm->vactive + vm->vfront_porch + vm->vback_porch +
+ vm->vsync_len;
+ fbmode->refresh = vm->pixelclock / (htotal * vtotal);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(fb_videomode_from_videomode);
+#endif
+
+
#else
int fb_parse_edid(unsigned char *edid, struct fb_var_screeninfo *var)
{
diff --git a/include/linux/fb.h b/include/linux/fb.h
index c7a9571..4404ec2 100644
--- a/include/linux/fb.h
+++ b/include/linux/fb.h
@@ -19,6 +19,7 @@ struct vm_area_struct;
struct fb_info;
struct device;
struct file;
+struct videomode;
/* Definitions below are used in the parsed monitor specs */
#define FB_DPMS_ACTIVE_OFF 1
@@ -714,6 +715,11 @@ extern void fb_destroy_modedb(struct fb_videomode *modedb);
extern int fb_find_mode_cvt(struct fb_videomode *mode, int margins, int rb);
extern unsigned char *fb_ddc_read(struct i2c_adapter *adapter);
+#if IS_ENABLED(CONFIG_VIDEOMODE)
+extern int fb_videomode_from_videomode(const struct videomode *vm,
+ struct fb_videomode *fbmode);
+#endif
+
/* drivers/video/modedb.c */
#define VESA_MODEDB_SIZE 34
extern void fb_var_to_videomode(struct fb_videomode *mode,
--
1.7.10.4
next prev parent reply other threads:[~2012-11-22 16:00 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-11-22 16:00 [PATCHv13 0/7] of: add display helper Steffen Trumtrar
[not found] ` <1353600015-6974-1-git-send-email-s.trumtrar-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2012-11-22 16:00 ` [PATCHv13 1/7] viafb: rename display_timing to via_display_timing Steffen Trumtrar
2012-11-22 16:00 ` [PATCHv13 2/7] video: add display_timing and videomode Steffen Trumtrar
2012-11-22 16:00 ` [PATCHv13 3/7] video: add of helper for display timings/videomode Steffen Trumtrar
2012-11-22 16:00 ` Steffen Trumtrar [this message]
[not found] ` <1353600015-6974-5-git-send-email-s.trumtrar-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2012-11-22 18:31 ` [PATCHv13 4/7] fbmon: add videomode helpers Laurent Pinchart
2012-11-22 23:09 ` Steffen Trumtrar
2012-11-22 23:52 ` Laurent Pinchart
2012-11-23 8:03 ` Steffen Trumtrar
2012-11-22 16:00 ` [PATCHv13 5/7] fbmon: add of_videomode helpers Steffen Trumtrar
[not found] ` <1353600015-6974-6-git-send-email-s.trumtrar-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2012-11-22 17:58 ` Laurent Pinchart
2012-11-23 7:54 ` Steffen Trumtrar
2012-11-22 16:00 ` [PATCHv13 6/7] drm_modes: add videomode helpers Steffen Trumtrar
2012-11-22 16:00 ` [PATCHv13 7/7] drm_modes: add of_videomode helpers Steffen Trumtrar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1353600015-6974-5-git-send-email-s.trumtrar@pengutronix.de \
--to=s.trumtrar@pengutronix.de \
--cc=FlorianSchandinat-Mmb7MZpHnFY@public.gmane.org \
--cc=airlied-cv59FeDIM0c@public.gmane.org \
--cc=devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org \
--cc=dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org \
--cc=g.liakhovetski-Mmb7MZpHnFY@public.gmane.org \
--cc=kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
--cc=laurent.pinchart-ryLnwIuWjnjg/C1BVhZhaw@public.gmane.org \
--cc=linux-fbdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-media-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=tomi.valkeinen-l0cyMroinI0@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).