From: Steffen Trumtrar <s.trumtrar@pengutronix.de>
To: devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org
Cc: linux-fbdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
David Airlie <airlied-cv59FeDIM0c@public.gmane.org>,
Florian Tobias Schandinat
<FlorianSchandinat-Mmb7MZpHnFY@public.gmane.org>,
dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org,
Tomi Valkeinen <tomi.valkeinen-l0cyMroinI0@public.gmane.org>,
Laurent Pinchart
<laurent.pinchart-ryLnwIuWjnjg/C1BVhZhaw@public.gmane.org>,
kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org,
Guennady Liakhovetski
<g.liakhovetski-Mmb7MZpHnFY@public.gmane.org>,
linux-media-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: [PATCHv13 5/7] fbmon: add of_videomode helpers
Date: Thu, 22 Nov 2012 16:00:13 +0000 [thread overview]
Message-ID: <1353600015-6974-6-git-send-email-s.trumtrar@pengutronix.de> (raw)
In-Reply-To: <1353600015-6974-1-git-send-email-s.trumtrar-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Add helper to get fb_videomode from devicetree.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de>
Acked-by: Thierry Reding <thierry.reding@avionic-design.de>
Tested-by: Thierry Reding <thierry.reding@avionic-design.de>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
drivers/video/fbmon.c | 42 +++++++++++++++++++++++++++++++++++++++++-
include/linux/fb.h | 6 ++++++
2 files changed, 47 insertions(+), 1 deletion(-)
diff --git a/drivers/video/fbmon.c b/drivers/video/fbmon.c
index a6a564d..cd0a035 100644
--- a/drivers/video/fbmon.c
+++ b/drivers/video/fbmon.c
@@ -31,7 +31,7 @@
#include <linux/pci.h>
#include <linux/slab.h>
#include <video/edid.h>
-#include <linux/videomode.h>
+#include <linux/of_videomode.h>
#ifdef CONFIG_PPC_OF
#include <asm/prom.h>
#include <asm/pci-bridge.h>
@@ -1416,6 +1416,46 @@ int fb_videomode_from_videomode(const struct videomode *vm,
EXPORT_SYMBOL_GPL(fb_videomode_from_videomode);
#endif
+#if IS_ENABLED(CONFIG_OF_VIDEOMODE)
+static inline void dump_fb_videomode(const struct fb_videomode *m)
+{
+ pr_debug("fb_videomode = %ux%u@%uHz (%ukHz) %u %u %u %u %u %u %u %u %u\n",
+ m->xres, m->yres, m->refresh, m->pixclock, m->left_margin,
+ m->right_margin, m->upper_margin, m->lower_margin,
+ m->hsync_len, m->vsync_len, m->sync, m->vmode, m->flag);
+}
+
+/**
+ * of_get_fb_videomode - get a fb_videomode from devicetree
+ * @np: device_node with the timing specification
+ * @fb: will be set to the return value
+ * @index: index into the list of display timings in devicetree
+ *
+ * DESCRIPTION:
+ * This function is expensive and should only be used, if only one mode is to be
+ * read from DT. To get multiple modes start with of_get_display_timings ond
+ * work with that instead.
+ */
+int of_get_fb_videomode(const struct device_node *np, struct fb_videomode *fb,
+ unsigned int index)
+{
+ struct videomode vm;
+ int ret;
+
+ ret = of_get_videomode(np, &vm, index);
+ if (ret)
+ return ret;
+
+ fb_videomode_from_videomode(&vm, fb);
+
+ pr_info("%s: got %dx%d display mode from %s\n", __func__, vm.hactive,
+ vm.vactive, np->name);
+ dump_fb_videomode(fb);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(of_get_fb_videomode);
+#endif
#else
int fb_parse_edid(unsigned char *edid, struct fb_var_screeninfo *var)
diff --git a/include/linux/fb.h b/include/linux/fb.h
index 4404ec2..43a2f81 100644
--- a/include/linux/fb.h
+++ b/include/linux/fb.h
@@ -20,6 +20,7 @@ struct fb_info;
struct device;
struct file;
struct videomode;
+struct device_node;
/* Definitions below are used in the parsed monitor specs */
#define FB_DPMS_ACTIVE_OFF 1
@@ -715,6 +716,11 @@ extern void fb_destroy_modedb(struct fb_videomode *modedb);
extern int fb_find_mode_cvt(struct fb_videomode *mode, int margins, int rb);
extern unsigned char *fb_ddc_read(struct i2c_adapter *adapter);
+#if IS_ENABLED(CONFIG_OF_VIDEOMODE)
+extern int of_get_fb_videomode(const struct device_node *np,
+ struct fb_videomode *fb,
+ unsigned int index);
+#endif
#if IS_ENABLED(CONFIG_VIDEOMODE)
extern int fb_videomode_from_videomode(const struct videomode *vm,
struct fb_videomode *fbmode);
--
1.7.10.4
next prev parent reply other threads:[~2012-11-22 16:00 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-11-22 16:00 [PATCHv13 0/7] of: add display helper Steffen Trumtrar
[not found] ` <1353600015-6974-1-git-send-email-s.trumtrar-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2012-11-22 16:00 ` [PATCHv13 1/7] viafb: rename display_timing to via_display_timing Steffen Trumtrar
2012-11-22 16:00 ` [PATCHv13 2/7] video: add display_timing and videomode Steffen Trumtrar
2012-11-22 16:00 ` [PATCHv13 3/7] video: add of helper for display timings/videomode Steffen Trumtrar
2012-11-22 16:00 ` [PATCHv13 4/7] fbmon: add videomode helpers Steffen Trumtrar
[not found] ` <1353600015-6974-5-git-send-email-s.trumtrar-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2012-11-22 18:31 ` Laurent Pinchart
2012-11-22 23:09 ` Steffen Trumtrar
2012-11-22 23:52 ` Laurent Pinchart
2012-11-23 8:03 ` Steffen Trumtrar
2012-11-22 16:00 ` Steffen Trumtrar [this message]
[not found] ` <1353600015-6974-6-git-send-email-s.trumtrar-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2012-11-22 17:58 ` [PATCHv13 5/7] fbmon: add of_videomode helpers Laurent Pinchart
2012-11-23 7:54 ` Steffen Trumtrar
2012-11-22 16:00 ` [PATCHv13 6/7] drm_modes: add videomode helpers Steffen Trumtrar
2012-11-22 16:00 ` [PATCHv13 7/7] drm_modes: add of_videomode helpers Steffen Trumtrar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1353600015-6974-6-git-send-email-s.trumtrar@pengutronix.de \
--to=s.trumtrar@pengutronix.de \
--cc=FlorianSchandinat-Mmb7MZpHnFY@public.gmane.org \
--cc=airlied-cv59FeDIM0c@public.gmane.org \
--cc=devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org \
--cc=dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org \
--cc=g.liakhovetski-Mmb7MZpHnFY@public.gmane.org \
--cc=kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
--cc=laurent.pinchart-ryLnwIuWjnjg/C1BVhZhaw@public.gmane.org \
--cc=linux-fbdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-media-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=tomi.valkeinen-l0cyMroinI0@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).