linux-fbdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Anatolij Gustschin <agust@denx.de>
To: linux-fbdev@vger.kernel.org
Subject: [PATCH 2/2] drivers/video: fsl-diu-fb: fix bugs in interrupt handling
Date: Thu, 17 Jan 2013 20:28:38 +0000	[thread overview]
Message-ID: <1358454518-14032-2-git-send-email-agust@denx.de> (raw)

Since commit f74de500 "drivers/video: fsl-diu-fb: streamline
enabling of interrupts" the interrupt handling in the driver
is broken. Enabling diu interrupt causes an interrupt storm and
results in system lockup.

The cookie for the interrupt handler function passed to request_irq()
is wrong (it must be a pointer to the diu struct, and not the address
of the pointer to the diu struct). As a result the interrupt handler
can not read diu registers and acknowledge the interrupt. Fix cookie
arguments for request_irq() and free_irq().

Masking the diu interrupts in probe() must happen before install_fb()
calls since this function registers framebuffer devices and if fbcon
tries to take over framebuffer after registering a framebuffer device,
it will call fb_open of the diu driver and enable the interrupts. But
at this time the diu interrupt handler is not registered yet. Therefore
we must mask the diu interrupts before registering the framebuffers
and enable the interrupts after registering the handler.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Timur Tabi <timur@tabi.org>
---
 drivers/video/fsl-diu-fb.c |   58 +++++++++++++++++++++++++++----------------
 1 files changed, 36 insertions(+), 22 deletions(-)

diff --git a/drivers/video/fsl-diu-fb.c b/drivers/video/fsl-diu-fb.c
index 4f8a2e4..b88cf78 100644
--- a/drivers/video/fsl-diu-fb.c
+++ b/drivers/video/fsl-diu-fb.c
@@ -378,6 +378,7 @@ struct fsl_diu_data {
 	u8 cursor[MAX_CURS * MAX_CURS * 2] __aligned(32);
 	uint8_t edid_data[EDID_LENGTH];
 	bool has_edid;
+	bool can_handle_irq;
 } __aligned(32);
 
 /* Determine the DMA address of a member of the fsl_diu_data structure */
@@ -1232,6 +1233,19 @@ static int fsl_diu_ioctl(struct fb_info *info, unsigned int cmd,
 	return 0;
 }
 
+static inline void fsl_diu_enable_interrupts(struct fsl_diu_data *data)
+{
+	u32 int_mask = INT_UNDRUN; /* enable underrun detection */
+
+	if (!data->can_handle_irq)
+		return;
+
+	if (IS_ENABLED(CONFIG_NOT_COHERENT_CACHE))
+		int_mask |= INT_VSYNC; /* enable vertical sync */
+
+	clrbits32(&data->diu_reg->int_mask, int_mask);
+}
+
 /* turn on fb if count = 1
  */
 static int fsl_diu_open(struct fb_info *info, int user)
@@ -1251,19 +1265,7 @@ static int fsl_diu_open(struct fb_info *info, int user)
 		if (res < 0)
 			mfbi->count--;
 		else {
-			struct fsl_diu_data *data = mfbi->parent;
-
-#ifdef CONFIG_NOT_COHERENT_CACHE
-			/*
-			 * Enable underrun detection and vertical sync
-			 * interrupts.
-			 */
-			clrbits32(&data->diu_reg->int_mask,
-				  INT_UNDRUN | INT_VSYNC);
-#else
-			/* Enable underrun detection */
-			clrbits32(&data->diu_reg->int_mask, INT_UNDRUN);
-#endif
+			fsl_diu_enable_interrupts(mfbi->parent);
 			fsl_diu_enable_panel(info);
 		}
 	}
@@ -1614,6 +1616,14 @@ static int fsl_diu_probe(struct platform_device *pdev)
 	out_be32(&data->diu_reg->desc[1], data->dummy_ad.paddr);
 	out_be32(&data->diu_reg->desc[2], data->dummy_ad.paddr);
 
+	/*
+	 * Older versions of U-Boot leave interrupts enabled, so disable
+	 * all of them and clear the status register.
+	 */
+	out_be32(&data->diu_reg->int_mask, 0xffffffff);
+	in_be32(&data->diu_reg->int_status);
+	data->can_handle_irq = false;
+
 	for (i = 0; i < NUM_AOIS; i++) {
 		ret = install_fb(&data->fsl_diu_info[i]);
 		if (ret) {
@@ -1622,20 +1632,24 @@ static int fsl_diu_probe(struct platform_device *pdev)
 		}
 	}
 
-	/*
-	 * Older versions of U-Boot leave interrupts enabled, so disable
-	 * all of them and clear the status register.
-	 */
-	out_be32(&data->diu_reg->int_mask, 0xffffffff);
-	in_be32(&data->diu_reg->int_status);
-
 	ret = request_irq(data->irq, fsl_diu_isr, 0, "fsl-diu-fb",
-			  &data->diu_reg);
+			  data->diu_reg);
 	if (ret) {
 		dev_err(&pdev->dev, "could not claim irq\n");
 		goto error;
 	}
 
+	data->can_handle_irq = true;
+
+	/* if an AOI is opened (i.e. by fbcon), enable the interrupts */
+	for (i = 0; i < NUM_AOIS; i++) {
+		struct fb_info *info = &data->fsl_diu_info[i];
+
+		mfbi = info->par;
+		if (mfbi->count)
+			fsl_diu_enable_interrupts(data);
+	}
+
 	sysfs_attr_init(&data->dev_attr.attr);
 	data->dev_attr.attr.name = "monitor";
 	data->dev_attr.attr.mode = S_IRUGO|S_IWUSR;
@@ -1667,7 +1681,7 @@ static int fsl_diu_remove(struct platform_device *pdev)
 	data = dev_get_drvdata(&pdev->dev);
 	disable_lcdc(&data->fsl_diu_info[0]);
 
-	free_irq(data->irq, &data->diu_reg);
+	free_irq(data->irq, data->diu_reg);
 
 	for (i = 0; i < NUM_AOIS; i++)
 		uninstall_fb(&data->fsl_diu_info[i]);
-- 
1.7.5.4


             reply	other threads:[~2013-01-17 20:28 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-01-17 20:28 Anatolij Gustschin [this message]
2013-01-17 22:20 ` [PATCH 2/2] drivers/video: fsl-diu-fb: fix bugs in interrupt handling Timur Tabi
2013-01-17 23:11 ` Anatolij Gustschin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1358454518-14032-2-git-send-email-agust@denx.de \
    --to=agust@denx.de \
    --cc=linux-fbdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).