[PATCH 3/3] fb: smscufx: fix hang at disconnect

[Alexander Holler <holler@ahsoftware.de>]

When a device was disconnected the driver may hang at waiting for urbs it never
will get. Fix this by using a timeout while waiting for the used semaphore.

There is still a memory leak if a timeout happens, but at least the driver
now continues his disconnect routine.

Cc: <stable@vger.kernel.org>
Signed-off-by: Alexander Holler <holler@ahsoftware.de>
---
 drivers/video/smscufx.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/video/smscufx.c b/drivers/video/smscufx.c
index 97bd662..f26fa4f 100644
--- a/drivers/video/smscufx.c
+++ b/drivers/video/smscufx.c
@@ -1838,8 +1838,9 @@ static void ufx_free_urb_list(struct ufx_data *dev)
 
 	/* keep waiting and freeing, until we've got 'em all */
 	while (count--) {
-		/* Getting interrupted means a leak, but ok at shutdown*/
-		ret = down_interruptible(&dev->urbs.limit_sem);
+		/* Timeout likely occurs at disconnect (resulting in a leak) */
+		ret = down_timeout_killable(&dev->urbs.limit_sem,
+						FREE_URB_TIMEOUT);
 		if (ret)
 			break;
 
-- 
1.7.11.7