From: Johan Hovold <jhovold@gmail.com>
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 1/3] ARM: at91/avr32/atmel_lcdfb: add bus-clock entry
Date: Thu, 07 Feb 2013 15:31:56 +0000 [thread overview]
Message-ID: <1360251118-12715-2-git-send-email-jhovold@gmail.com> (raw)
In-Reply-To: <1360251118-12715-1-git-send-email-jhovold@gmail.com>
Add hclk entry for the atmel_lcdfb bus clock.
On at91sam9261, at91sam9g10 and at32ap the bus clock has to be enabled
as well as the peripheral clock. Add the appropriate lookup entries to
these SOCs and fake clocks to the SOCs that do not use it.
This allows us to get rid of the conditional enabling of the clocks in
the driver which relied on the cpu_is macros.
Tested on at91sam9263 and at91sam9g45, compile-tested for other
AT91-SOCs, and untested for AVR32.
Signed-off-by: Johan Hovold <jhovold@gmail.com>
---
arch/arm/mach-at91/at91sam9261.c | 1 +
arch/arm/mach-at91/at91sam9263.c | 1 +
arch/arm/mach-at91/at91sam9g45.c | 1 +
arch/arm/mach-at91/at91sam9rl.c | 1 +
arch/avr32/mach-at32ap/at32ap700x.c | 4 ++--
drivers/video/atmel_lcdfb.c | 23 ++++++++---------------
6 files changed, 14 insertions(+), 17 deletions(-)
diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c
index 2998a08..5838f12 100644
--- a/arch/arm/mach-at91/at91sam9261.c
+++ b/arch/arm/mach-at91/at91sam9261.c
@@ -169,6 +169,7 @@ static struct clk *periph_clocks[] __initdata = {
};
static struct clk_lookup periph_clocks_lookups[] = {
+ CLKDEV_CON_DEV_ID("hclk", "atmel_lcdfb.0", &hck1),
CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk),
CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk),
CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk),
diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c
index 4618776..53d6123 100644
--- a/arch/arm/mach-at91/at91sam9263.c
+++ b/arch/arm/mach-at91/at91sam9263.c
@@ -190,6 +190,7 @@ static struct clk_lookup periph_clocks_lookups[] = {
CLKDEV_CON_DEV_ID("pclk", "at91rm9200_ssc.1", &ssc1_clk),
CLKDEV_CON_DEV_ID("pclk", "fff98000.ssc", &ssc0_clk),
CLKDEV_CON_DEV_ID("pclk", "fff9c000.ssc", &ssc1_clk),
+ CLKDEV_CON_DEV_ID("hclk", "atmel_lcdfb.0", &lcdc_clk),
CLKDEV_CON_DEV_ID("mci_clk", "atmel_mci.0", &mmc0_clk),
CLKDEV_CON_DEV_ID("mci_clk", "atmel_mci.1", &mmc1_clk),
CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk),
diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c
index b6f1342..1def8c9 100644
--- a/arch/arm/mach-at91/at91sam9g45.c
+++ b/arch/arm/mach-at91/at91sam9g45.c
@@ -228,6 +228,7 @@ static struct clk_lookup periph_clocks_lookups[] = {
CLKDEV_CON_ID("hclk", &macb_clk),
/* One additional fake clock for ohci */
CLKDEV_CON_ID("ohci_clk", &uhphs_clk),
+ CLKDEV_CON_DEV_ID("hclk", "atmel_lcdfb.0", &lcdc_clk),
CLKDEV_CON_DEV_ID("ehci_clk", "atmel-ehci", &uhphs_clk),
CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc", &utmi_clk),
CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc", &udphs_clk),
diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c
index eb98704..4cd4fa9 100644
--- a/arch/arm/mach-at91/at91sam9rl.c
+++ b/arch/arm/mach-at91/at91sam9rl.c
@@ -179,6 +179,7 @@ static struct clk *periph_clocks[] __initdata = {
};
static struct clk_lookup periph_clocks_lookups[] = {
+ CLKDEV_CON_DEV_ID("hclk", "atmel_lcdfb.0", &lcdc_clk),
CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc", &utmi_clk),
CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc", &udphs_clk),
CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk),
diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c
index b323d8d..cd25b01 100644
--- a/arch/avr32/mach-at32ap/at32ap700x.c
+++ b/arch/avr32/mach-at32ap/at32ap700x.c
@@ -1453,7 +1453,7 @@ static struct resource atmel_lcdfb0_resource[] = {
},
};
DEFINE_DEV_DATA(atmel_lcdfb, 0);
-DEV_CLK(hck1, atmel_lcdfb0, hsb, 7);
+DEV_CLK(hclk, atmel_lcdfb0, hsb, 7);
static struct clk atmel_lcdfb0_pixclk = {
.name = "lcdc_clk",
.dev = &atmel_lcdfb0_device.dev,
@@ -2246,7 +2246,7 @@ static __initdata struct clk *init_clocks[] = {
&atmel_twi0_pclk,
&atmel_mci0_pclk,
#if defined(CONFIG_CPU_AT32AP7000) || defined(CONFIG_CPU_AT32AP7002)
- &atmel_lcdfb0_hck1,
+ &atmel_lcdfb0_hclk,
&atmel_lcdfb0_pixclk,
#endif
&ssc0_pclk,
diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
index 93910e3..86cafae 100644
--- a/drivers/video/atmel_lcdfb.c
+++ b/drivers/video/atmel_lcdfb.c
@@ -820,15 +820,13 @@ static int __init atmel_lcdfb_init_fbinfo(struct atmel_lcdfb_info *sinfo)
static void atmel_lcdfb_start_clock(struct atmel_lcdfb_info *sinfo)
{
- if (sinfo->bus_clk)
- clk_enable(sinfo->bus_clk);
+ clk_enable(sinfo->bus_clk);
clk_enable(sinfo->lcdc_clk);
}
static void atmel_lcdfb_stop_clock(struct atmel_lcdfb_info *sinfo)
{
- if (sinfo->bus_clk)
- clk_disable(sinfo->bus_clk);
+ clk_disable(sinfo->bus_clk);
clk_disable(sinfo->lcdc_clk);
}
@@ -887,13 +885,10 @@ static int __init atmel_lcdfb_probe(struct platform_device *pdev)
info->fix = atmel_lcdfb_fix;
/* Enable LCDC Clocks */
- if (cpu_is_at91sam9261() || cpu_is_at91sam9g10()
- || cpu_is_at32ap7000()) {
- sinfo->bus_clk = clk_get(dev, "hck1");
- if (IS_ERR(sinfo->bus_clk)) {
- ret = PTR_ERR(sinfo->bus_clk);
- goto free_info;
- }
+ sinfo->bus_clk = clk_get(dev, "hclk");
+ if (IS_ERR(sinfo->bus_clk)) {
+ ret = PTR_ERR(sinfo->bus_clk);
+ goto free_info;
}
sinfo->lcdc_clk = clk_get(dev, "lcdc_clk");
if (IS_ERR(sinfo->lcdc_clk)) {
@@ -1054,8 +1049,7 @@ stop_clk:
atmel_lcdfb_stop_clock(sinfo);
clk_put(sinfo->lcdc_clk);
put_bus_clk:
- if (sinfo->bus_clk)
- clk_put(sinfo->bus_clk);
+ clk_put(sinfo->bus_clk);
free_info:
framebuffer_release(info);
out:
@@ -1080,8 +1074,7 @@ static int __exit atmel_lcdfb_remove(struct platform_device *pdev)
unregister_framebuffer(info);
atmel_lcdfb_stop_clock(sinfo);
clk_put(sinfo->lcdc_clk);
- if (sinfo->bus_clk)
- clk_put(sinfo->bus_clk);
+ clk_put(sinfo->bus_clk);
fb_dealloc_cmap(&info->cmap);
free_irq(sinfo->irq_base, info);
iounmap(sinfo->mmio);
--
1.8.1.1
next prev parent reply other threads:[~2013-02-07 15:31 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-12-10 12:28 [PATCH 0/3] atmel_lcdfb: fix 16-bpp regression Johan Hovold
2012-12-10 12:28 ` [PATCH 1/3] atmel_lcdfb: fix 16-bpp modes on older SOCs Johan Hovold
2012-12-10 12:50 ` Peter Korsgaard
2013-01-29 13:54 ` Jean-Christophe PLAGNIOL-VILLARD
2013-01-30 13:26 ` Johan Hovold
2013-02-05 13:35 ` [PATCH 0/5] atmel_lcdfb: regression fixes and cpu_is removal Johan Hovold
2013-02-05 13:35 ` [PATCH 1/5] atmel_lcdfb: fix 16-bpp modes on older SOCs Johan Hovold
2013-02-05 13:35 ` [PATCH 2/5] ARM: at91/neocore926: fix LCD-wiring mode Johan Hovold
2013-02-05 13:35 ` [PATCH 3/5] atmel_lcdfb: remove unsupported 15-bpp mode Johan Hovold
2013-02-05 13:35 ` [PATCH 4/5] atmel_lcdfb: move lcdcon2 register access to compute_hozval Johan Hovold
2013-02-05 13:35 ` [PATCH 5/5] ARM: at91/avr32/atmel_lcdfb: replace cpu_is macros with device-id table Johan Hovold
2013-02-05 20:11 ` Jean-Christophe PLAGNIOL-VILLARD
2013-02-07 15:31 ` [PATCH v2 0/3] ARM: at91/avr32/atmel_lcdfb: remove cpu_is macros Johan Hovold
2013-02-07 15:31 ` Johan Hovold [this message]
2013-02-07 15:31 ` [PATCH v2 2/3] atmel_lcdfb: move lcdcon2 register access to compute_hozval Johan Hovold
2013-02-07 15:31 ` [PATCH v2 3/3] ARM: at91/avr32/atmel_lcdfb: add platform device-id table Johan Hovold
2012-12-10 12:28 ` [PATCH 2/3] ARM: at91/neocore926: fix LCD-wiring mode Johan Hovold
2012-12-10 12:50 ` Peter Korsgaard
2012-12-10 12:28 ` [PATCH 3/3] atmel_lcdfb: remove unsupported 15-bpp mode Johan Hovold
2012-12-10 12:51 ` Peter Korsgaard
2013-01-26 15:44 ` [PATCH 0/3] atmel_lcdfb: fix 16-bpp regression Johan Hovold
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1360251118-12715-2-git-send-email-jhovold@gmail.com \
--to=jhovold@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).