From: Archit Taneja <archit@ti.com>
To: tomi.valkeinen@ti.com
Cc: linux-omap@vger.kernel.org, linux-fbdev@vger.kernel.org,
Archit Taneja <archit@ti.com>, Tony Lindgren <tony@atomide.com>
Subject: [PATCH 29/33] arm: omap boards: Remove unnecessary platform_enable/disable callbacks for VENC device
Date: Wed, 13 Feb 2013 14:34:21 +0000 [thread overview]
Message-ID: <1360765345-19312-30-git-send-email-archit@ti.com> (raw)
In-Reply-To: <1360765345-19312-1-git-send-email-archit@ti.com>
The omap_dss_device's platform_enable/disable callbacks don't do anything for
any of the boards. The platform calls from the VENC driver will also be removed
in the future. Remove these calls from the board which have a VENC device.
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Archit Taneja <archit@ti.com>
---
arch/arm/mach-omap2/board-3430sdp.c | 11 -----------
arch/arm/mach-omap2/board-am3517evm.c | 11 -----------
arch/arm/mach-omap2/board-cm-t35.c | 11 -----------
arch/arm/mach-omap2/board-omap3evm.c | 11 -----------
arch/arm/mach-omap2/board-omap3stalker.c | 11 -----------
5 files changed, 55 deletions(-)
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index 13f1431..717dd15 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -124,15 +124,6 @@ static void __init sdp3430_display_init(void)
}
-static int sdp3430_panel_enable_tv(struct omap_dss_device *dssdev)
-{
- return 0;
-}
-
-static void sdp3430_panel_disable_tv(struct omap_dss_device *dssdev)
-{
-}
-
static struct panel_sharp_ls037v7dw01_data sdp3430_lcd_data = {
.resb_gpio = SDP3430_LCD_PANEL_ENABLE_GPIO,
.ini_gpio = -1,
@@ -167,8 +158,6 @@ static struct omap_dss_device sdp3430_tv_device = {
.driver_name = "venc",
.type = OMAP_DISPLAY_TYPE_VENC,
.phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO,
- .platform_enable = sdp3430_panel_enable_tv,
- .platform_disable = sdp3430_panel_disable_tv,
};
diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c
index eb245a6..edb4cce 100644
--- a/arch/arm/mach-omap2/board-am3517evm.c
+++ b/arch/arm/mach-omap2/board-am3517evm.c
@@ -138,22 +138,11 @@ static struct omap_dss_device am3517_evm_lcd_device = {
.phy.dpi.data_lines = 16,
};
-static int am3517_evm_panel_enable_tv(struct omap_dss_device *dssdev)
-{
- return 0;
-}
-
-static void am3517_evm_panel_disable_tv(struct omap_dss_device *dssdev)
-{
-}
-
static struct omap_dss_device am3517_evm_tv_device = {
.type = OMAP_DISPLAY_TYPE_VENC,
.name = "tv",
.driver_name = "venc",
.phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO,
- .platform_enable = am3517_evm_panel_enable_tv,
- .platform_disable = am3517_evm_panel_disable_tv,
};
static struct tfp410_platform_data dvi_panel = {
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index 563d5ab..cb3b078 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -189,15 +189,6 @@ static inline void cm_t35_init_nand(void) {}
#define CM_T35_LCD_BL_GPIO 58
#define CM_T35_DVI_EN_GPIO 54
-static int cm_t35_panel_enable_tv(struct omap_dss_device *dssdev)
-{
- return 0;
-}
-
-static void cm_t35_panel_disable_tv(struct omap_dss_device *dssdev)
-{
-}
-
static struct panel_generic_dpi_data lcd_panel = {
.name = "toppoly_tdo35s",
.num_gpios = 2,
@@ -233,8 +224,6 @@ static struct omap_dss_device cm_t35_tv_device = {
.driver_name = "venc",
.type = OMAP_DISPLAY_TYPE_VENC,
.phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO,
- .platform_enable = cm_t35_panel_enable_tv,
- .platform_disable = cm_t35_panel_disable_tv,
};
static struct omap_dss_device *cm_t35_dss_devices[] = {
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index dfb5e1b..a471476 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -201,22 +201,11 @@ static struct omap_dss_device omap3_evm_lcd_device = {
.data = &omap3_evm_lcd_data,
};
-static int omap3_evm_enable_tv(struct omap_dss_device *dssdev)
-{
- return 0;
-}
-
-static void omap3_evm_disable_tv(struct omap_dss_device *dssdev)
-{
-}
-
static struct omap_dss_device omap3_evm_tv_device = {
.name = "tv",
.driver_name = "venc",
.type = OMAP_DISPLAY_TYPE_VENC,
.phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO,
- .platform_enable = omap3_evm_enable_tv,
- .platform_disable = omap3_evm_disable_tv,
};
static struct tfp410_platform_data dvi_panel = {
diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c
index 621ace1..8f1b0a1 100644
--- a/arch/arm/mach-omap2/board-omap3stalker.c
+++ b/arch/arm/mach-omap2/board-omap3stalker.c
@@ -93,15 +93,6 @@ static void __init omap3_stalker_display_init(void)
return;
}
-static int omap3_stalker_enable_tv(struct omap_dss_device *dssdev)
-{
- return 0;
-}
-
-static void omap3_stalker_disable_tv(struct omap_dss_device *dssdev)
-{
-}
-
static struct omap_dss_device omap3_stalker_tv_device = {
.name = "tv",
.driver_name = "venc",
@@ -111,8 +102,6 @@ static struct omap_dss_device omap3_stalker_tv_device = {
#elif defined(CONFIG_OMAP2_VENC_OUT_TYPE_COMPOSITE)
.u.venc.type = OMAP_DSS_VENC_TYPE_COMPOSITE,
#endif
- .platform_enable = omap3_stalker_enable_tv,
- .platform_disable = omap3_stalker_disable_tv,
};
static struct tfp410_platform_data dvi_panel = {
--
1.7.9.5
next prev parent reply other threads:[~2013-02-13 14:34 UTC|newest]
Thread overview: 67+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-02-13 14:33 [PATCH 00/33] OMAPDSS: platform_enable/disable callback removal from panel drivers Archit Taneja
2013-02-13 14:33 ` [PATCH 01/33] OMAPDSS: panels: keep platform data of all panels in a single header Archit Taneja
2013-02-13 14:33 ` [PATCH 02/33] OMAPDSS: generic dpi panel: handle gpios in panel driver Archit Taneja
2013-02-13 14:33 ` [PATCH 03/33] arm: omap: board-2430: use generic dpi panel's gpio handling Archit Taneja
2013-02-13 14:33 ` [PATCH 04/33] arm: omap: board-devkit8000: " Archit Taneja
2013-02-13 14:33 ` [PATCH 05/33] arm: omap: board-cm-t35: " Archit Taneja
2013-02-13 15:16 ` Igor Grinberg
2013-02-13 15:28 ` Tomi Valkeinen
2013-02-13 15:59 ` Tomi Valkeinen
2013-02-14 6:56 ` Igor Grinberg
2013-02-14 7:09 ` Tomi Valkeinen
2013-02-14 8:37 ` Igor Grinberg
2013-02-14 9:09 ` Tomi Valkeinen
2013-02-14 9:43 ` Igor Grinberg
2013-02-14 10:59 ` Tomi Valkeinen
2013-02-14 12:37 ` Igor Grinberg
2013-02-14 12:52 ` Tomi Valkeinen
2013-02-14 13:51 ` Igor Grinberg
2013-04-03 12:02 ` Tomi Valkeinen
2013-04-04 7:17 ` Igor Grinberg
2013-02-13 14:33 ` [PATCH 06/33] arm: omap: board-apollon: " Archit Taneja
2013-02-13 14:33 ` [PATCH 07/33] arm: omap: board-am3517: " Archit Taneja
2013-02-13 14:34 ` [PATCH 08/33] arm: omap: board-ldp: " Archit Taneja
2013-02-13 14:34 ` [PATCH 09/33] OMAPDSS: lb035q02: handle gpios in panel driver Archit Taneja
2013-02-13 14:34 ` [PATCH 10/33] arm: omap: board-overo: use lb035q02 dpi panel's gpio handling Archit Taneja
2013-02-13 14:34 ` [PATCH 11/33] OMAPDSS: lb035q02 panel: remove platform_enable/disable callbacks Archit Taneja
2013-02-13 14:34 ` [PATCH 12/33] OMAPDSS: generic dpi panel: remove platform_enable/disable ops from platform_data Archit Taneja
2013-02-13 14:34 ` [PATCH 13/33] arm: omap: board-omap3evm: use sharp panel's gpio handling Archit Taneja
2013-02-13 14:34 ` [PATCH 14/33] arm: omap: board-sdp3430: " Archit Taneja
2013-02-13 14:34 ` [PATCH 15/33] OMAPDSS: sharp-ls panel: remove platform_enable/disable callbacks Archit Taneja
2013-02-13 14:34 ` [PATCH 16/33] OMAPDSS: acx565akm panel: handle gpios in panel driver Archit Taneja
2013-02-13 17:29 ` Aaro Koskinen
2013-02-14 6:52 ` Archit Taneja
2013-02-14 6:58 ` Tomi Valkeinen
2013-02-14 7:20 ` Archit Taneja
2013-02-18 7:45 ` Archit Taneja
2013-02-18 8:11 ` Tomi Valkeinen
2013-02-18 8:35 ` Archit Taneja
2013-02-13 14:34 ` [PATCH 17/33] arm: omap: board-rx-51: use acx565akm panel's gpio handling Archit Taneja
2013-02-13 14:34 ` [PATCH 18/33] OMAPDSS: nec-nl8048 panel: handle gpios ins panel driver Archit Taneja
2013-02-13 14:34 ` [PATCH 19/33] arm: omap: board-zoom: use NEC panel's gpio handling Archit Taneja
2013-02-13 14:34 ` [PATCH 20/33] OMAPDSS: nec-nl8048 panel: remove platform_enable/disable callbacks Archit Taneja
2013-02-13 14:34 ` [PATCH 21/33] OMAPDSS: tpo-td043 panel: handle gpios in panel driver Archit Taneja
2013-02-13 14:34 ` [PATCH 22/33] arm: omap: board-omap3pandora: use tpo panel's gpio handling Archit Taneja
2013-02-13 14:34 ` [PATCH 23/33] OMAPDSS: tpo-td043: remove platform_enable/disable callbacks Archit Taneja
2013-02-13 14:34 ` [PATCH 24/33] OMAPDSS: picodlp panel: handle gpio data in panel driver Archit Taneja
2013-02-13 14:34 ` [PATCH 25/33] arm: omap: dss-common: use picodlp panel's gpio handling Archit Taneja
2013-02-13 14:34 ` [PATCH 26/33] OMAPDSS: picodlp panel: remove platform_enable/disable callbacks Archit Taneja
2013-02-13 14:34 ` [PATCH 27/33] OMAPDSS: n8x0 panel: handle gpio data in panel driver Archit Taneja
2013-02-13 17:35 ` Aaro Koskinen
2013-02-14 6:46 ` Archit Taneja
2013-02-14 12:45 ` Aaro Koskinen
2013-02-13 14:34 ` [PATCH 28/33] OMAPDSS: n8x0 panel: remove platform_enable/disable callbacks Archit Taneja
2013-02-13 14:34 ` Archit Taneja [this message]
2013-02-13 14:34 ` [PATCH 30/33] OMAPDSS: VENC: remove platform_enable/disable calls Archit Taneja
2013-02-13 14:34 ` [PATCH 31/33] OMAPDSS: remove platform_enable/disable callbacks from omap_dss_device Archit Taneja
2013-02-13 14:34 ` [PATCH 32/33] arm: dss-common: don't use reset_gpio from omap4_panda_dvi_device Archit Taneja
2013-02-13 14:34 ` [PATCH 33/33] OMAPDSS: remove reset_gpio field from omap_dss_device Archit Taneja
2013-02-13 16:46 ` [PATCH 00/33] OMAPDSS: platform_enable/disable callback removal from panel drivers Tony Lindgren
2013-02-14 7:29 ` Archit Taneja
2013-04-03 12:28 ` Tomi Valkeinen
2013-04-03 15:46 ` Tony Lindgren
2013-04-15 9:29 ` Tomi Valkeinen
2013-04-15 21:20 ` Tony Lindgren
2013-04-16 4:20 ` Tomi Valkeinen
2013-04-18 0:34 ` Tony Lindgren
2013-04-18 3:40 ` Tomi Valkeinen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1360765345-19312-30-git-send-email-archit@ti.com \
--to=archit@ti.com \
--cc=linux-fbdev@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=tomi.valkeinen@ti.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).