From: Sylwester Nawrocki <sylvester.nawrocki@gmail.com>
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 0/9] s3c24xx LCD controller driver cleanup
Date: Fri, 26 Apr 2013 20:02:14 +0000 [thread overview]
Message-ID: <1367006543-5458-1-git-send-email-sylvester.nawrocki@gmail.com> (raw)
This patch series moves the s3c2410fb driver header files from
arch/arm/mach-s3c24xx to the driver specific directories. It
also includes couple cleanups to the driver itself and a patch
actually enabling the display during initialization, so it works
with FRAMEBUFFER_CONSOLE disabled.
Patches 6...9 have no dependencies on rest of the series.
The whole series is also available at:
git://github.com/snawrocki/linux.git cleanup/s3c2410fb
It has been tested on the Micro2440 board.
Sylwester Nawrocki (9):
s3c2410fb: Move platform data declarations to
include/linux/platform_data
s3c2410fb: Make most of register definitions local
ARM: S3C24XX: Remove include/mach/regs-lcd.h header file
s3c2410fb: Register single platform driver
s3c2410fb: Use dev_pm_ops
s3c2410fb: Enable display by default
s3c2410fb: Use devm_ioremap_resource()
s3c2410fb: Remove redundant platform_set_drvdata()
s3c2410fb: Use module parameter instead of a sysfs entry
arch/arm/mach-s3c24xx/dma-s3c2410.c | 1 -
arch/arm/mach-s3c24xx/dma-s3c2412.c | 1 -
arch/arm/mach-s3c24xx/dma-s3c2440.c | 1 -
arch/arm/mach-s3c24xx/dma-s3c2443.c | 1 -
arch/arm/mach-s3c24xx/include/mach/fb.h | 1 -
arch/arm/mach-s3c24xx/include/mach/regs-lcd.h | 162 ----------------------
arch/arm/mach-s3c24xx/mach-anubis.c | 1 -
arch/arm/mach-s3c24xx/mach-at2440evb.c | 3 +-
arch/arm/mach-s3c24xx/mach-bast.c | 3 +-
arch/arm/mach-s3c24xx/mach-gta02.c | 2 +-
arch/arm/mach-s3c24xx/mach-h1940.c | 3 +-
arch/arm/mach-s3c24xx/mach-jive.c | 3 +-
arch/arm/mach-s3c24xx/mach-mini2440.c | 3 +-
arch/arm/mach-s3c24xx/mach-n30.c | 3 +-
arch/arm/mach-s3c24xx/mach-osiris.c | 1 -
arch/arm/mach-s3c24xx/mach-qt2410.c | 3 +-
arch/arm/mach-s3c24xx/mach-rx1950.c | 3 +-
arch/arm/mach-s3c24xx/mach-smdk2413.c | 3 +-
arch/arm/mach-s3c24xx/mach-smdk2416.c | 1 -
arch/arm/mach-s3c24xx/mach-smdk2440.c | 3 +-
arch/arm/mach-s3c24xx/mach-smdk2443.c | 3 +-
arch/arm/mach-s3c24xx/mach-vstms.c | 4 +-
arch/arm/plat-samsung/devs.c | 2 +-
arch/arm/plat-samsung/include/plat/fb-s3c2410.h | 72 ----------
drivers/video/s3c2410fb.c | 165 ++++++-----------------
drivers/video/s3c2410fb.h | 114 +++++++++++++++-
include/linux/platform_data/fb-s3c2410.h | 106 +++++++++++++++
27 files changed, 272 insertions(+), 396 deletions(-)
delete mode 100644 arch/arm/mach-s3c24xx/include/mach/fb.h
delete mode 100644 arch/arm/mach-s3c24xx/include/mach/regs-lcd.h
delete mode 100644 arch/arm/plat-samsung/include/plat/fb-s3c2410.h
create mode 100644 include/linux/platform_data/fb-s3c2410.h
--
1.7.4.1
next reply other threads:[~2013-04-26 20:02 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-04-26 20:02 Sylwester Nawrocki [this message]
2013-04-26 20:02 ` [PATCH 1/9] s3c2410fb: Move platform data declarations to include/linux/platform_data Sylwester Nawrocki
2013-04-26 20:02 ` [PATCH 2/9] s3c2410fb: Make most of register definitions local Sylwester Nawrocki
2013-04-26 20:02 ` [PATCH 3/9] ARM: S3C24XX: Remove include/mach/regs-lcd.h header file Sylwester Nawrocki
2013-04-26 20:02 ` [PATCH 4/9] s3c2410fb: Register single platform driver Sylwester Nawrocki
2013-04-26 20:02 ` [PATCH 5/9] s3c2410fb: Use dev_pm_ops Sylwester Nawrocki
2013-04-26 20:02 ` [PATCH 6/9] s3c2410fb: Enable display by default Sylwester Nawrocki
2013-04-26 20:02 ` [PATCH 7/9] s3c2410fb: Use devm_ioremap_resource() Sylwester Nawrocki
2013-04-26 20:02 ` [PATCH 8/9] s3c2410fb: Remove redundant platform_set_drvdata() Sylwester Nawrocki
2013-05-02 5:31 ` Jingoo Han
2013-05-02 20:11 ` Sylwester Nawrocki
2013-04-26 20:02 ` [PATCH 9/9] s3c2410fb: Use module parameter instead of a sysfs entry Sylwester Nawrocki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1367006543-5458-1-git-send-email-sylvester.nawrocki@gmail.com \
--to=sylvester.nawrocki@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).