From: Tomi Valkeinen <tomi.valkeinen@ti.com>
To: linux-fbdev@vger.kernel.org, linux-omap@vger.kernel.org,
Archit Taneja <archit@ti.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Subject: [PATCH 03/27] OMAPDSS: add platform data structs for new panel drivers
Date: Thu, 30 May 2013 09:35:56 +0000 [thread overview]
Message-ID: <1369906580-27585-4-git-send-email-tomi.valkeinen@ti.com> (raw)
In-Reply-To: <1369906580-27585-1-git-send-email-tomi.valkeinen@ti.com>
With the new DSS device model, we'll have new panel and encoder drivers.
This patch adds the platform data structs for all the new drivers.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
include/video/omap-panel-data.h | 150 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 150 insertions(+)
diff --git a/include/video/omap-panel-data.h b/include/video/omap-panel-data.h
index 0c3b46d..317ee36 100644
--- a/include/video/omap-panel-data.h
+++ b/include/video/omap-panel-data.h
@@ -27,6 +27,8 @@
#ifndef __OMAP_PANEL_DATA_H
#define __OMAP_PANEL_DATA_H
+#include <video/omapdss.h>
+
struct omap_dss_device;
/**
@@ -147,4 +149,152 @@ struct panel_tpo_td043_data {
int nreset_gpio;
};
+/**
+ * panel_dpi platform data
+ * @name: name for this display entity
+ * @source: name of the display entity used as a video source
+ * @data_lines: number of DPI datalines
+ * @display_timing: timings for this panel
+ * @backlight_gpio: gpio to enable/disable the backlight (or -1)
+ * @enable_gpio: gpio to enable/disable the panel (or -1)
+ */
+struct panel_dpi_platform_data {
+ const char *name;
+ const char *source;
+
+ int data_lines;
+
+ const struct display_timing *display_timing;
+
+ int backlight_gpio;
+ int enable_gpio;
+};
+
+/**
+ * panel_dsicm platform data
+ * @name: name for this display entity
+ * @source: name of the display entity used as a video source
+ * @reset_gpio: gpio to reset the panel (or -1)
+ * @use_ext_te: use external TE GPIO
+ * @ext_te_gpio: external TE GPIO
+ * @ulps_timeout: time to wait before entering ULPS, 0 = disabled (ms)
+ * @use_dsi_backlight: true if panel uses DSI command to control backlight
+ * @pin_config: DSI pin configuration
+ */
+struct panel_dsicm_platform_data {
+ const char *name;
+ const char *source;
+
+ int reset_gpio;
+
+ bool use_ext_te;
+ int ext_te_gpio;
+
+ unsigned ulps_timeout;
+
+ bool use_dsi_backlight;
+
+ struct omap_dsi_pin_config pin_config;
+};
+
+/**
+ * panel_acx565akm platform data
+ * @name: name for this display entity
+ * @source: name of the display entity used as a video source
+ * @reset_gpio: gpio to reset the panel (or -1)
+ * @datapairs: number of SDI datapairs
+ */
+struct panel_acx565akm_platform_data {
+ const char *name;
+ const char *source;
+
+ int reset_gpio;
+
+ int datapairs;
+};
+
+/**
+ * panel_lb035q02 platform data
+ * @name: name for this display entity
+ * @source: name of the display entity used as a video source
+ * @data_lines: number of DPI datalines
+ * @backlight_gpio: gpio to enable/disable the backlight (or -1)
+ * @enable_gpio: gpio to enable/disable the panel (or -1)
+ */
+struct panel_lb035q02_platform_data {
+ const char *name;
+ const char *source;
+
+ int data_lines;
+
+ int backlight_gpio;
+ int enable_gpio;
+};
+
+/**
+ * connector_dvi platform data
+ * @name: name for this display entity
+ * @source: name of the display entity used as a video source
+ * @i2c_bus_num: i2c bus number to be used for reading EDID
+ */
+struct connector_dvi_platform_data {
+ const char *name;
+ const char *source;
+ int i2c_bus_num;
+};
+
+/**
+ * connector_hdmi platform data
+ * @name: name for this display entity
+ * @source: name of the display entity used as a video source
+ */
+struct connector_hdmi_platform_data {
+ const char *name;
+ const char *source;
+};
+
+/**
+ * connector_atv platform data
+ * @name: name for this display entity
+ * @source: name of the display entity used as a video source
+ * @connector_type: composite/svideo
+ * @invert_polarity: invert signal polarity
+ */
+struct connector_atv_platform_data {
+ const char *name;
+ const char *source;
+
+ enum omap_dss_venc_type connector_type;
+ bool invert_polarity;
+};
+
+/**
+ * encoder_tfp410 platform data
+ * @name: name for this display entity
+ * @power_down_gpio: gpio number for PD pin (or -1 if not available)
+ * @data_lines: number of DPI datalines
+ */
+struct encoder_tfp410_platform_data {
+ const char *name;
+ const char *source;
+ int power_down_gpio;
+ int data_lines;
+};
+
+/**
+ * encoder_tpd12s015 platform data
+ * @name: name for this display entity
+ * @ct_cp_hpd_gpio: CT_CP_HPD gpio number
+ * @ls_oe_gpio: LS_OE gpio number
+ * @hpd_gpio: HPD gpio number
+ */
+struct encoder_tpd12s015_platform_data {
+ const char *name;
+ const char *source;
+
+ int ct_cp_hpd_gpio;
+ int ls_oe_gpio;
+ int hpd_gpio;
+};
+
#endif /* __OMAP_PANEL_DATA_H */
--
1.8.1.2
next prev parent reply other threads:[~2013-05-30 9:35 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-05-30 9:35 [PATCH 00/27] OMAPDSS: dss-dev-model (Part 2/2) Tomi Valkeinen
2013-05-30 9:35 ` [PATCH 01/27] OMAPDSS: public omapdss_register_output() Tomi Valkeinen
2013-05-30 9:35 ` [PATCH 02/27] OMAPDSS: modify get/find functions to go through the device chain Tomi Valkeinen
2013-05-30 9:35 ` Tomi Valkeinen [this message]
2013-05-30 9:35 ` [PATCH 04/27] ARM: OMAP: dss-common: use new display drivers Tomi Valkeinen
2013-05-30 9:35 ` [PATCH 05/27] ARM: OMAP: overo: " Tomi Valkeinen
2013-05-30 9:35 ` [PATCH 06/27] ARM: OMAP: rx51: " Tomi Valkeinen
2013-05-30 9:36 ` [PATCH 07/27] ARM: OMAP: beagle: " Tomi Valkeinen
2013-05-30 9:36 ` [PATCH 08/27] OMAPDSS: add OMAP_DISPLAY_TYPE_DVI Tomi Valkeinen
2013-05-30 9:36 ` [PATCH 09/27] drm/omap: DVI connector fix Tomi Valkeinen
2013-05-30 9:36 ` [PATCH 10/27] OMAPDSS: DPI: Add ops Tomi Valkeinen
2013-05-30 9:36 ` [PATCH 11/27] OMAPDSS: SDI: " Tomi Valkeinen
2013-05-30 9:36 ` [PATCH 12/27] OMAPDSS: DVI: " Tomi Valkeinen
2013-05-30 9:36 ` [PATCH 13/27] OMAPDSS: AnalogTV: " Tomi Valkeinen
2013-05-30 9:36 ` [PATCH 14/27] OMAPDSS: HDMI: " Tomi Valkeinen
2013-05-30 9:36 ` [PATCH 15/27] OMAPDSS: DSI: " Tomi Valkeinen
2013-05-30 9:36 ` [PATCH 16/27] OMAPDSS: Add new TFP410 Encoder driver Tomi Valkeinen
2013-05-30 9:36 ` [PATCH 17/27] OMAPDSS: Add new TPD12S015 " Tomi Valkeinen
2013-05-30 9:36 ` [PATCH 18/27] OMAPDSS: Add new DVI Connector driver Tomi Valkeinen
2013-05-30 9:36 ` [PATCH 19/27] OMAPDSS: Add new HDMI " Tomi Valkeinen
2013-05-30 9:36 ` [PATCH 20/27] OMAPDSS: Add new Analog TV " Tomi Valkeinen
2013-05-30 9:36 ` [PATCH 21/27] OMAPDSS: Add new simple DPI panel driver Tomi Valkeinen
2013-05-30 9:36 ` [PATCH 22/27] OMAPDSS: Add new DSI Command Mode " Tomi Valkeinen
2013-05-30 9:36 ` [PATCH 23/27] OMAPDSS: Add Sony ACX565AKM " Tomi Valkeinen
2013-05-30 9:36 ` [PATCH 24/27] OMAPDSS: Add LG.Philips LB035Q02 " Tomi Valkeinen
2013-05-30 9:36 ` [PATCH 25/27] ARM: OMAP: fix dsi regulator names Tomi Valkeinen
2013-05-30 9:36 ` [PATCH 26/27] ARM: OMAP: add vdds_dsi supply for dpi.0 Tomi Valkeinen
2013-05-30 9:36 ` [PATCH 27/27] ARM: OMAP: add vdds_sdi supply for sdi.0 Tomi Valkeinen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1369906580-27585-4-git-send-email-tomi.valkeinen@ti.com \
--to=tomi.valkeinen@ti.com \
--cc=archit@ti.com \
--cc=linux-fbdev@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox