From mboxrd@z Thu Jan 1 00:00:00 1970 From: Darren Etheridge Date: Tue, 25 Jun 2013 14:22:33 +0000 Subject: [PATCH 05/23] video: da8xx-fb: store current display information Message-Id: <1372170171-9561-6-git-send-email-detheridge@ti.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-fbdev@vger.kernel.org From: Afzal Mohammed store current videomode and controller data so that reconfiguring can be done easily. Reconfiguring would be required in fb_set_par, which is going to be added soon. If these details are not stored, the work probe does to retrieve these information would have to repeated at the place of reconfiguring and modifying platform data would be necessary to handle controller data changes like bpp. Signed-off-by: Afzal Mohammed Signed-off-by: Darren Etheridge --- drivers/video/da8xx-fb.c | 4 ++++ 1 files changed, 4 insertions(+), 0 deletions(-) diff --git a/drivers/video/da8xx-fb.c b/drivers/video/da8xx-fb.c index 18834fa..d060f14 100644 --- a/drivers/video/da8xx-fb.c +++ b/drivers/video/da8xx-fb.c @@ -178,6 +178,8 @@ struct da8xx_fb_par { #endif void (*panel_power_ctrl)(int); u32 pseudo_palette[16]; + struct fb_videomode mode; + struct lcd_ctrl_config cfg; }; static struct fb_var_screeninfo da8xx_fb_var; @@ -1310,6 +1312,8 @@ static int fb_probe(struct platform_device *device) } fb_videomode_to_var(&da8xx_fb_var, lcdc_info); + fb_var_to_videomode(&par->mode, &da8xx_fb_var); + par->cfg = *lcd_cfg; if (lcd_init(par, lcd_cfg, lcdc_info) < 0) { dev_err(&device->dev, "lcd_init failed\n"); -- 1.7.0.4