From: Alison Wang <b18965@freescale.com>
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 0/5] ARM: vf610: Add DCU framebuffer driver for Vybrid VF610 platform
Date: Fri, 12 Jul 2013 06:07:51 +0000 [thread overview]
Message-ID: <1373609276-14566-1-git-send-email-b18965@freescale.com> (raw)
This series contain DCU framebuffer driver for Freescale Vybrid VF610 platform.
The Display Controller Unit (DCU) module is a system master that
fetches graphics stored in internal or external memory and displays
them on a TFT LCD panel. A wide range of panel sizes is supported
and the timing of the interface signals is highly configurable.
Graphics are read directly from memory and then blended in real-time,
which allows for dynamic content creation with minimal CPU intervention.
The features:
(1) Full RGB888 output to TFT LCD panel.
(2) For the current LCD panel, WQVGA "480x272" is tested.
(3) Blending of each pixel using up to 4 source layers dependent on size of panel.
(4) Each graphic layer can be placed with one pixel resolution in either axis.
(5) Each graphic layer support RGB565 and RGB888 direct colors without alpha channel
and BGRA8888 direct colors with an alpha channel.
(6) Each graphic layer support alpha blending with 8-bit resolution.
Changes in v2:
- Add a document for DCU framebuffer driver under Documentation/devicetree/bindings/fb/.
----------------------------------------------------------------
Alison Wang (5):
ARM: dts: vf610: Add DCU and TCON nodes
ARM: dts: vf610-twr: Enable DCU and TCON devices
ARM: clk: vf610: Add DCU and TCON clock support
fb: Add DCU framebuffer driver for Vybrid VF610 platform
Documentation: DT: Add DCU framebuffer driver
Documentation/devicetree/bindings/fb/fsl-dcu-fb.txt | 36 ++++
arch/arm/boot/dts/vf610-twr.dts | 10 +
arch/arm/boot/dts/vf610.dtsi | 19 +-
arch/arm/mach-imx/clk-vf610.c | 5 +
drivers/video/Kconfig | 9 +
drivers/video/Makefile | 1 +
drivers/video/fsl-dcu-fb.c | 1091 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
include/dt-bindings/clock/vf610-clock.h | 3 +-
8 files changed, 1172 insertions(+), 2 deletions(-)
create mode 100644 Documentation/devicetree/bindings/fb/fsl-dcu-fb.txt
create mode 100644 drivers/video/fsl-dcu-fb.c
next reply other threads:[~2013-07-12 6:07 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-12 6:07 Alison Wang [this message]
2013-07-12 6:07 ` [PATCH 1/5] ARM: dts: vf610: Add DCU and TCON nodes Alison Wang
2013-07-12 6:07 ` [PATCH 2/5] ARM: dts: vf610-twr: Enable DCU and TCON devices Alison Wang
2013-07-12 6:07 ` [PATCH 3/5] ARM: clk: vf610: Add DCU and TCON clock support Alison Wang
2013-07-12 6:07 ` [PATCH 4/5] fb: Add DCU framebuffer driver for Vybrid VF610 platform Alison Wang
2013-07-29 11:14 ` Sascha Hauer
2013-08-05 9:51 ` Wang Huan-B18965
2013-08-05 10:06 ` Sascha Hauer
2013-08-06 3:42 ` Wang Huan-B18965
2013-08-05 13:09 ` Robert Schwebel
2013-08-05 14:18 ` Lucas Stach
2013-08-06 7:20 ` Wang Huan-B18965
2013-08-06 8:47 ` Lucas Stach
2013-08-07 8:07 ` Wang Huan-B18965
2013-07-12 6:07 ` [PATCH 5/5] Documentation: DT: Add DCU framebuffer driver Alison Wang
2013-07-19 3:49 ` [PATCH v2 0/5] ARM: vf610: Add DCU framebuffer driver for Vybrid VF610 platform Wang Huan-B18965
2013-07-29 6:13 ` Wang Huan-B18965
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1373609276-14566-1-git-send-email-b18965@freescale.com \
--to=b18965@freescale.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).