From mboxrd@z Thu Jan 1 00:00:00 1970 From: Kishon Vijay Abraham I Date: Thu, 18 Jul 2013 06:58:13 +0000 Subject: [PATCH 04/15] ARM: OMAP: USB: Add phy binding information Message-Id: <1374129984-765-5-git-send-email-kishon@ti.com> List-Id: References: <1374129984-765-1-git-send-email-kishon@ti.com> In-Reply-To: <1374129984-765-1-git-send-email-kishon@ti.com> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-arm-kernel@lists.infradead.org In order for controllers to get PHY in case of non dt boot, the phy binding information (phy device name) should be added in the platform data of the controller. Signed-off-by: Kishon Vijay Abraham I Reviewed-by: Sylwester Nawrocki Acked-by: Felipe Balbi --- arch/arm/mach-omap2/usb-musb.c | 3 +++ include/linux/usb/musb.h | 3 +++ 2 files changed, 6 insertions(+) diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c index 8c4de27..6aa7cbf 100644 --- a/arch/arm/mach-omap2/usb-musb.c +++ b/arch/arm/mach-omap2/usb-musb.c @@ -85,6 +85,9 @@ void __init usb_musb_init(struct omap_musb_board_data *musb_board_data) musb_plat.mode = board_data->mode; musb_plat.extvbus = board_data->extvbus; + if (cpu_is_omap34xx()) + musb_plat.phy_label = "twl4030"; + if (soc_is_am35xx()) { oh_name = "am35x_otg_hs"; name = "musb-am35x"; diff --git a/include/linux/usb/musb.h b/include/linux/usb/musb.h index 053c268..596f8c8 100644 --- a/include/linux/usb/musb.h +++ b/include/linux/usb/musb.h @@ -104,6 +104,9 @@ struct musb_hdrc_platform_data { /* for clk_get() */ const char *clock; + /* phy label */ + const char *phy_label; + /* (HOST or OTG) switch VBUS on/off */ int (*set_vbus)(struct device *dev, int is_on); -- 1.7.10.4