From: Kishon Vijay Abraham I <kishon@ti.com>
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/7] exynos4-is: Use the generic MIPI CSIS PHY driver
Date: Wed, 16 Oct 2013 16:40:11 +0000 [thread overview]
Message-ID: <1381940896-9355-3-git-send-email-kishon@ti.com> (raw)
In-Reply-To: <1381940896-9355-1-git-send-email-kishon@ti.com>
From: Sylwester Nawrocki <sylvester.nawrocki@gmail.com>
Use the generic PHY API instead of the platform callback
to control the MIPI CSIS DPHY.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
drivers/media/platform/exynos4-is/Kconfig | 2 +-
drivers/media/platform/exynos4-is/mipi-csis.c | 13 ++++++++++---
include/linux/platform_data/mipi-csis.h | 9 ---------
3 files changed, 11 insertions(+), 13 deletions(-)
diff --git a/drivers/media/platform/exynos4-is/Kconfig b/drivers/media/platform/exynos4-is/Kconfig
index 53ad0f0..d2d3b4b 100644
--- a/drivers/media/platform/exynos4-is/Kconfig
+++ b/drivers/media/platform/exynos4-is/Kconfig
@@ -29,7 +29,7 @@ config VIDEO_S5P_FIMC
config VIDEO_S5P_MIPI_CSIS
tristate "S5P/EXYNOS MIPI-CSI2 receiver (MIPI-CSIS) driver"
depends on REGULATOR
- select S5P_SETUP_MIPIPHY
+ select GENERIC_PHY
help
This is a V4L2 driver for Samsung S5P and EXYNOS4 SoC MIPI-CSI2
receiver (MIPI-CSIS) devices.
diff --git a/drivers/media/platform/exynos4-is/mipi-csis.c b/drivers/media/platform/exynos4-is/mipi-csis.c
index 0914230..9fc2af6 100644
--- a/drivers/media/platform/exynos4-is/mipi-csis.c
+++ b/drivers/media/platform/exynos4-is/mipi-csis.c
@@ -20,6 +20,7 @@
#include <linux/memory.h>
#include <linux/module.h>
#include <linux/of.h>
+#include <linux/phy/phy.h>
#include <linux/platform_data/mipi-csis.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
@@ -180,6 +181,7 @@ struct csis_drvdata {
* @sd: v4l2_subdev associated with CSIS device instance
* @index: the hardware instance index
* @pdev: CSIS platform device
+ * @phy: pointer to the CSIS generic PHY
* @regs: mmaped I/O registers memory
* @supplies: CSIS regulator supplies
* @clock: CSIS clocks
@@ -203,6 +205,7 @@ struct csis_state {
struct v4l2_subdev sd;
u8 index;
struct platform_device *pdev;
+ struct phy *phy;
void __iomem *regs;
struct regulator_bulk_data supplies[CSIS_NUM_SUPPLIES];
struct clk *clock[NUM_CSIS_CLOCKS];
@@ -779,8 +782,8 @@ static int s5pcsis_parse_dt(struct platform_device *pdev,
"samsung,csis-wclk");
state->num_lanes = endpoint.bus.mipi_csi2.num_data_lanes;
-
of_node_put(node);
+
return 0;
}
#else
@@ -829,6 +832,10 @@ static int s5pcsis_probe(struct platform_device *pdev)
return -EINVAL;
}
+ state->phy = devm_phy_get(dev, "csis");
+ if (IS_ERR(state->phy))
+ return PTR_ERR(state->phy);
+
mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
state->regs = devm_ioremap_resource(dev, mem_res);
if (IS_ERR(state->regs))
@@ -922,7 +929,7 @@ static int s5pcsis_pm_suspend(struct device *dev, bool runtime)
mutex_lock(&state->lock);
if (state->flags & ST_POWERED) {
s5pcsis_stop_stream(state);
- ret = s5p_csis_phy_enable(state->index, false);
+ ret = phy_power_off(state->phy);
if (ret)
goto unlock;
ret = regulator_bulk_disable(CSIS_NUM_SUPPLIES,
@@ -958,7 +965,7 @@ static int s5pcsis_pm_resume(struct device *dev, bool runtime)
state->supplies);
if (ret)
goto unlock;
- ret = s5p_csis_phy_enable(state->index, true);
+ ret = phy_power_on(state->phy);
if (!ret) {
state->flags |= ST_POWERED;
} else {
diff --git a/include/linux/platform_data/mipi-csis.h b/include/linux/platform_data/mipi-csis.h
index bf34e17..c2fd902 100644
--- a/include/linux/platform_data/mipi-csis.h
+++ b/include/linux/platform_data/mipi-csis.h
@@ -25,13 +25,4 @@ struct s5p_platform_mipi_csis {
u8 hs_settle;
};
-/**
- * s5p_csis_phy_enable - global MIPI-CSI receiver D-PHY control
- * @id: MIPI-CSIS harware instance index (0...1)
- * @on: true to enable D-PHY and deassert its reset
- * false to disable D-PHY
- * @return: 0 on success, or negative error code on failure
- */
-int s5p_csis_phy_enable(int id, bool on);
-
#endif /* __PLAT_SAMSUNG_MIPI_CSIS_H_ */
--
1.7.10.4
next prev parent reply other threads:[~2013-10-16 16:40 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-10-16 16:40 [PATCH 0/7] video phy's adaptation to *generic phy framework* Kishon Vijay Abraham I
2013-10-16 16:40 ` [PATCH 1/7] phy: Add driver for Exynos MIPI CSIS/DSIM DPHYs Kishon Vijay Abraham I
2013-10-16 16:40 ` Kishon Vijay Abraham I [this message]
2013-10-16 16:40 ` [PATCH 3/7] video: exynos_mipi_dsim: Use the generic PHY driver Kishon Vijay Abraham I
2013-10-24 14:30 ` Olof Johansson
2013-10-24 15:39 ` [PATCH] drivers: video: exynos: Fix compiler Warning Kishon Vijay Abraham I
2013-10-24 15:31 ` Felipe Balbi
2013-10-24 15:54 ` [PATCH 3/7] video: exynos_mipi_dsim: Use the generic PHY driver Sachin Kamat
2013-10-24 15:57 ` Kishon Vijay Abraham I
2013-10-24 21:57 ` Sylwester Nawrocki
2013-10-28 6:12 ` Donghwa Lee
2013-10-28 12:24 ` Tomasz Figa
2013-10-29 8:38 ` Donghwa Lee
2013-10-30 0:43 ` Sylwester Nawrocki
2013-10-24 17:06 ` Olof Johansson
2013-10-16 16:40 ` [PATCH 4/7] ARM: Samsung: Remove the MIPI PHY setup code Kishon Vijay Abraham I
2013-10-16 16:40 ` [PATCH 5/7] phy: Add driver for Exynos DP PHY Kishon Vijay Abraham I
2013-10-24 15:13 ` Tomasz Stanislawski
2013-10-16 16:40 ` [PATCH 6/7] video: exynos_dp: remove non-DT support for Exynos Display Port Kishon Vijay Abraham I
2013-10-16 16:40 ` [PATCH 7/7] video: exynos_dp: Use the generic PHY driver Kishon Vijay Abraham I
2013-10-16 20:49 ` [PATCH 0/7] video phy's adaptation to *generic phy framework* Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1381940896-9355-3-git-send-email-kishon@ti.com \
--to=kishon@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).