From: Denis Carikli <denis@eukrea.com>
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCHv3][ 5/5] ARM: dts: mbimxsd35 Add video and displays support.
Date: Wed, 23 Oct 2013 12:43:49 +0000 [thread overview]
Message-ID: <1382532229-32755-5-git-send-email-denis@eukrea.com> (raw)
In-Reply-To: <1382532229-32755-1-git-send-email-denis@eukrea.com>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: devicetree@vger.kernel.org
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: linux-fbdev@vger.kernel.org
Cc: Eric Bénard <eric@eukrea.com>
Signed-off-by: Denis Carikli <denis@eukrea.com>
---
ChangeLog v2->v3:
- The dts were adapted to the new DT bindings which looks more like the IPUv3
ones.
---
.../imx35-eukrea-mbimxsd35-baseboard-cmo-qvga.dts | 61 ++++++++++++++++++++
.../imx35-eukrea-mbimxsd35-baseboard-dvi-svga.dts | 51 ++++++++++++++++
.../imx35-eukrea-mbimxsd35-baseboard-dvi-vga.dts | 51 ++++++++++++++++
3 files changed, 163 insertions(+)
create mode 100644 arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard-cmo-qvga.dts
create mode 100644 arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard-dvi-svga.dts
create mode 100644 arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard-dvi-vga.dts
diff --git a/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard-cmo-qvga.dts b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard-cmo-qvga.dts
new file mode 100644
index 0000000..6d186ca
--- /dev/null
+++ b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard-cmo-qvga.dts
@@ -0,0 +1,61 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include "imx35-eukrea-mbimxsd35-baseboard.dts"
+
+/ {
+ model = "Eukrea MBIMXSD35 with the CMO-QVGA Display";
+ compatible = "eukrea,mbimxsd35-baseboard-cmo-qvga", "eukrea,mbimxsd35-baseboard", "eukrea,cpuimx35", "fsl,imx35";
+
+ display@di0 {
+ regulator-name = "lcd";
+ interface-pix-fmt = "rgb666";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcdc_1>;
+ model = "CMO-QVGA";
+ display-timings {
+ qvga_timings: 320x240 {
+ clock-frequency = <6500000>;
+ hactive = <320>;
+ vactive = <240>;
+ hback-porch = <68>;
+ hfront-porch = <20>;
+ vback-porch = <15>;
+ vfront-porch = <4>;
+ hsync-len = <30>;
+ vsync-len = <3>;
+ };
+ };
+ };
+
+ reg_lcd_3v3: lcd-en {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_lcd_3v3>;
+ regulator-name = "lcd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio1 4 0>;
+ enable-active-high;
+ };
+};
+
+&lcdc {
+ lcd-supply = <®_lcd_3v3>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard-dvi-svga.dts b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard-dvi-svga.dts
new file mode 100644
index 0000000..ccf5f48
--- /dev/null
+++ b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard-dvi-svga.dts
@@ -0,0 +1,51 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include "imx35-eukrea-mbimxsd35-baseboard.dts"
+
+/ {
+ model = "Eukrea MBIMXSD35 with the DVI-SVGA Display";
+ compatible = "eukrea,mbimxsd35-baseboard-dvi-svga", "eukrea,mbimxsd35-baseboard", "eukrea,cpuimx35", "fsl,imx35";
+ display@di0 {
+ interface-pix-fmt = "rgb666";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcdc_1>;
+ model = "DVI-SVGA";
+ display-timings {
+ svga_timings: 800x600 {
+ clock-frequency = <40000000>;
+ hactive = <800>;
+ vactive = <600>;
+ hback-porch = <75>;
+ hfront-porch = <75>;
+ vback-porch = <7>;
+ vfront-porch = <75>;
+ hsync-len = <7>;
+ vsync-len = <7>;
+ hsync-active = <1>;
+ vsync-active = <1>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+ };
+ };
+};
+
+&lcdc {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard-dvi-vga.dts b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard-dvi-vga.dts
new file mode 100644
index 0000000..6e31684
--- /dev/null
+++ b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard-dvi-vga.dts
@@ -0,0 +1,51 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include "imx35-eukrea-mbimxsd35-baseboard.dts"
+
+/ {
+ model = "Eukrea MBIMXSD35 with the DVI-VGA Display";
+ compatible = "eukrea,mbimxsd35-baseboard-dvi-vga", "eukrea,mbimxsd35-baseboard", "eukrea,cpuimx35", "fsl,imx35";
+ display@di0 {
+ interface-pix-fmt = "rgb666";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcdc_1>;
+ model = "DVI-VGA";
+ display-timings {
+ vga_timings: 640x480 {
+ clock-frequency = <31250000>;
+ hactive = <640>;
+ vactive = <480>;
+ hback-porch = <100>;
+ hfront-porch = <100>;
+ vback-porch = <7>;
+ vfront-porch = <100>;
+ hsync-len = <7>;
+ vsync-len = <7>;
+ hsync-active = <1>;
+ vsync-active = <1>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+ };
+ };
+};
+
+&lcdc {
+ status = "okay";
+};
--
1.7.9.5
next prev parent reply other threads:[~2013-10-23 12:43 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-10-23 12:43 [PATCHv3][ 1/5] fbdev: Add the lacking FB_SYNC_* for matching the DISPLAY_FLAGS_* Denis Carikli
2013-10-23 12:43 ` [PATCHv3][ 3/5] video: mx3fb: Add device tree suport Denis Carikli
[not found] ` <20131025195040.0CCC3C404DA@trevor.secretlab.ca>
2013-10-26 0:18 ` Sascha Hauer
2013-10-26 6:43 ` Kumar Gala
2013-10-26 6:40 ` Kumar Gala
2013-10-23 12:43 ` [PATCHv3][ 4/5] video: mx3fb: Introduce regulator support Denis Carikli
2013-10-23 12:43 ` Denis Carikli [this message]
2013-10-29 10:35 ` [PATCHv3][ 1/5] fbdev: Add the lacking FB_SYNC_* for matching the DISPLAY_FLAGS_* Tomi Valkeinen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1382532229-32755-5-git-send-email-denis@eukrea.com \
--to=denis@eukrea.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).