From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tomi Valkeinen Date: Tue, 21 Jan 2014 10:57:10 +0000 Subject: [PATCHv3 38/41] Doc/DT: Add DT binding documentation for MIPI DSI CM Panel Message-Id: <1390301833-24944-39-git-send-email-tomi.valkeinen@ti.com> List-Id: References: <1390301833-24944-1-git-send-email-tomi.valkeinen@ti.com> In-Reply-To: <1390301833-24944-1-git-send-email-tomi.valkeinen@ti.com> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-arm-kernel@lists.infradead.org Add DT binding documentation for MIPI DSI Command Mode Panel. Signed-off-by: Tomi Valkeinen --- .../devicetree/bindings/video/panel-dsi-cm.txt | 26 ++++++++++++++++++++++ 1 file changed, 26 insertions(+) create mode 100644 Documentation/devicetree/bindings/video/panel-dsi-cm.txt diff --git a/Documentation/devicetree/bindings/video/panel-dsi-cm.txt b/Documentation/devicetree/bindings/video/panel-dsi-cm.txt new file mode 100644 index 000000000000..73f422556d4f --- /dev/null +++ b/Documentation/devicetree/bindings/video/panel-dsi-cm.txt @@ -0,0 +1,26 @@ +Generic MIPI DSI Command Mode Panel +=================+ +Required properties: +- compatible: "panel-dsi-cm" + +Optional properties: +- label: a symbolic name for the panel +- gpios: panel reset gpio and TE gpio + +Required nodes: +- Video port for DSI input + +Example +------- + +lcd0: display { + compatible = "tpo,taal", "panel-dsi-cm"; + label = "lcd0"; + + gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* 102, reset */ + + lcd0_in: endpoint { + remote-endpoint = <&dsi1_out_ep>; + }; +}; -- 1.8.3.2