* [PATCH 01/28] Remove CPU_MMP3 [not found] <1391971686-9517-1-git-send-email-richard@nod.at> @ 2014-02-09 18:47 ` Richard Weinberger 2014-02-09 22:07 ` Paul Bolle 2014-02-11 21:30 ` Greg Kroah-Hartman 2014-02-09 18:47 ` [PATCH 07/28] Remove CPU_PXA988 Richard Weinberger 1 sibling, 2 replies; 9+ messages in thread From: Richard Weinberger @ 2014-02-09 18:47 UTC (permalink / raw) To: Felipe Balbi, Greg Kroah-Hartman, Jean-Christophe Plagniol-Villard, Tomi Valkeinen, open list:USB PHY LAYER, open list, open list:FRAMEBUFFER LAYER Cc: Richard Weinberger The symbol is an orphan, get rid of it. Signed-off-by: Richard Weinberger <richard@nod.at> --- drivers/usb/phy/Kconfig | 1 - drivers/video/mmp/Kconfig | 2 +- drivers/video/mmp/hw/Kconfig | 2 +- 3 files changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig index 7d1451d..b9b1c52 100644 --- a/drivers/usb/phy/Kconfig +++ b/drivers/usb/phy/Kconfig @@ -61,7 +61,6 @@ config KEYSTONE_USB_PHY config MV_U3D_PHY bool "Marvell USB 3.0 PHY controller Driver" - depends on CPU_MMP3 select USB_PHY help Enable this to support Marvell USB 3.0 phy controller for Marvell diff --git a/drivers/video/mmp/Kconfig b/drivers/video/mmp/Kconfig index e9ea39e..969925d 100644 --- a/drivers/video/mmp/Kconfig +++ b/drivers/video/mmp/Kconfig @@ -1,6 +1,6 @@ menuconfig MMP_DISP tristate "Marvell MMP Display Subsystem support" - depends on CPU_PXA910 || CPU_MMP2 || CPU_MMP3 || CPU_PXA988 + depends on CPU_PXA910 || CPU_MMP2 || CPU_PXA988 help Marvell Display Subsystem support. diff --git a/drivers/video/mmp/hw/Kconfig b/drivers/video/mmp/hw/Kconfig index 02f109a..57b03e2 100644 --- a/drivers/video/mmp/hw/Kconfig +++ b/drivers/video/mmp/hw/Kconfig @@ -2,7 +2,7 @@ if MMP_DISP config MMP_DISP_CONTROLLER bool "mmp display controller hw support" - depends on CPU_PXA910 || CPU_MMP2 || CPU_MMP3 || CPU_PXA988 + depends on CPU_PXA910 || CPU_MMP2 || CPU_PXA988 default n help Marvell MMP display hw controller support -- 1.8.4.2 ^ permalink raw reply related [flat|nested] 9+ messages in thread
* Re: [PATCH 01/28] Remove CPU_MMP3 2014-02-09 18:47 ` [PATCH 01/28] Remove CPU_MMP3 Richard Weinberger @ 2014-02-09 22:07 ` Paul Bolle 2014-02-11 21:30 ` Greg Kroah-Hartman 1 sibling, 0 replies; 9+ messages in thread From: Paul Bolle @ 2014-02-09 22:07 UTC (permalink / raw) To: Richard Weinberger Cc: Felipe Balbi, Greg Kroah-Hartman, Jean-Christophe Plagniol-Villard, Tomi Valkeinen, open list:USB PHY LAYER, open list, open list:FRAMEBUFFER LAYER On Sun, 2014-02-09 at 19:47 +0100, Richard Weinberger wrote: > The symbol is an orphan, get rid of it. > > Signed-off-by: Richard Weinberger <richard@nod.at> This symbol first popped up as a dependency in v3.6, through commit 3d4eb9dfa3e8 ("usb: gadget: mv: Add USB 3.0 device driver for Marvell PXA2128 chip."). The Kconfig symbol itself was never added. > diff --git a/drivers/video/mmp/hw/Kconfig b/drivers/video/mmp/hw/Kconfig > index 02f109a..57b03e2 100644 > --- a/drivers/video/mmp/hw/Kconfig > +++ b/drivers/video/mmp/hw/Kconfig > @@ -2,7 +2,7 @@ if MMP_DISP > > config MMP_DISP_CONTROLLER > bool "mmp display controller hw support" > - depends on CPU_PXA910 || CPU_MMP2 || CPU_MMP3 || CPU_PXA988 > + depends on CPU_PXA910 || CPU_MMP2 || CPU_PXA988 > default n > help > Marvell MMP display hw controller support You should remove the reference to MMP3 in the help text (not displayed here) too, I'd guess. Aside from that: Acked-by: Paul Bolle <pebolle@tiscali.nl> Paul Bolle ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH 01/28] Remove CPU_MMP3 2014-02-09 18:47 ` [PATCH 01/28] Remove CPU_MMP3 Richard Weinberger 2014-02-09 22:07 ` Paul Bolle @ 2014-02-11 21:30 ` Greg Kroah-Hartman 2014-02-11 22:01 ` Paul Bolle 1 sibling, 1 reply; 9+ messages in thread From: Greg Kroah-Hartman @ 2014-02-11 21:30 UTC (permalink / raw) To: Richard Weinberger Cc: Felipe Balbi, Jean-Christophe Plagniol-Villard, Tomi Valkeinen, open list:USB PHY LAYER, open list, open list:FRAMEBUFFER LAYER On Sun, Feb 09, 2014 at 07:47:39PM +0100, Richard Weinberger wrote: > The symbol is an orphan, get rid of it. > > Signed-off-by: Richard Weinberger <richard@nod.at> > Acked-by: Paul Bolle <pebolle@tiscali.nl> > > --- > drivers/usb/phy/Kconfig | 1 - > drivers/video/mmp/Kconfig | 2 +- > drivers/video/mmp/hw/Kconfig | 2 +- > 3 files changed, 2 insertions(+), 3 deletions(-) > > diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig > index 7d1451d..b9b1c52 100644 > --- a/drivers/usb/phy/Kconfig > +++ b/drivers/usb/phy/Kconfig > @@ -61,7 +61,6 @@ config KEYSTONE_USB_PHY > > config MV_U3D_PHY > bool "Marvell USB 3.0 PHY controller Driver" > - depends on CPU_MMP3 > select USB_PHY > help > Enable this to support Marvell USB 3.0 phy controller for Marvell Do this and the driver breaks the build so it needs to depend on something: drivers/usb/phy/phy-mv-u3d-usb.c: In function ‘mv_u3d_phy_read’: drivers/usb/phy/phy-mv-u3d-usb.c:42:2: error: implicit declaration of function ‘writel_relaxed’ [-Werror=implicit-function-declaration] Sorry, I can't take this as-is. greg k-h ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH 01/28] Remove CPU_MMP3 2014-02-11 21:30 ` Greg Kroah-Hartman @ 2014-02-11 22:01 ` Paul Bolle 2014-02-12 7:52 ` Geert Uytterhoeven 0 siblings, 1 reply; 9+ messages in thread From: Paul Bolle @ 2014-02-11 22:01 UTC (permalink / raw) To: Greg Kroah-Hartman Cc: Richard Weinberger, Felipe Balbi, Jean-Christophe Plagniol-Villard, Tomi Valkeinen, open list:USB PHY LAYER, open list, open list:FRAMEBUFFER LAYER On Tue, 2014-02-11 at 13:30 -0800, Greg Kroah-Hartman wrote: > On Sun, Feb 09, 2014 at 07:47:39PM +0100, Richard Weinberger wrote: > > The symbol is an orphan, get rid of it. > > > > Signed-off-by: Richard Weinberger <richard@nod.at> > > Acked-by: Paul Bolle <pebolle@tiscali.nl> > > > > --- > > drivers/usb/phy/Kconfig | 1 - > > drivers/video/mmp/Kconfig | 2 +- > > drivers/video/mmp/hw/Kconfig | 2 +- > > 3 files changed, 2 insertions(+), 3 deletions(-) > > > > diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig > > index 7d1451d..b9b1c52 100644 > > --- a/drivers/usb/phy/Kconfig > > +++ b/drivers/usb/phy/Kconfig > > @@ -61,7 +61,6 @@ config KEYSTONE_USB_PHY > > > > config MV_U3D_PHY > > bool "Marvell USB 3.0 PHY controller Driver" > > - depends on CPU_MMP3 > > select USB_PHY > > help > > Enable this to support Marvell USB 3.0 phy controller for Marvell > > Do this and the driver breaks the build so it needs to depend on > something: > > drivers/usb/phy/phy-mv-u3d-usb.c: In function ‘mv_u3d_phy_read’: > drivers/usb/phy/phy-mv-u3d-usb.c:42:2: error: implicit declaration of function ‘writel_relaxed’ [-Werror=implicit-function-declaration] This sort of proves that a driver that depends on an unknown Kconfig symbol gets no build coverage (and will bit rot). > Sorry, I can't take this as-is. My mistake, I should have spotted this when looking a Richard's patch. Some background (which I quickly dug up): config MV_U3D_PHY got added in v3.7 through commit a67e76ac904c ("usb: phy: mv_u3d: Add usb phy driver for mv_u3d"). It then depended on USB_MV_U3D. And that symbol depended on CPU_MMP3 at that time. Ie, MV_U3D_PHY was unbuildable when it was added. In commit 60630c2eabd4 ("usb: gadget: mv_u3d: drop ARCH dependency") MV_U3D_PHY was made depended directly on CPU_MMP3. That kept it unbuildable, of course. Richard, assuming you agree with the above short history of MV_U3D_PHY, would you mind sending a v2 that removes this unbuildable driver? Paul Bolle ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH 01/28] Remove CPU_MMP3 2014-02-11 22:01 ` Paul Bolle @ 2014-02-12 7:52 ` Geert Uytterhoeven 0 siblings, 0 replies; 9+ messages in thread From: Geert Uytterhoeven @ 2014-02-12 7:52 UTC (permalink / raw) To: Paul Bolle Cc: Greg Kroah-Hartman, Richard Weinberger, Felipe Balbi, Jean-Christophe Plagniol-Villard, Tomi Valkeinen, open list:USB PHY LAYER, open list, open list:FRAMEBUFFER LAYER Cc Yu Xu <yuxu@marvell.com> On Tue, Feb 11, 2014 at 11:01 PM, Paul Bolle <pebolle@tiscali.nl> wrote: > On Tue, 2014-02-11 at 13:30 -0800, Greg Kroah-Hartman wrote: >> On Sun, Feb 09, 2014 at 07:47:39PM +0100, Richard Weinberger wrote: >> > The symbol is an orphan, get rid of it. >> > >> > Signed-off-by: Richard Weinberger <richard@nod.at> >> > Acked-by: Paul Bolle <pebolle@tiscali.nl> >> > >> > --- >> > drivers/usb/phy/Kconfig | 1 - >> > drivers/video/mmp/Kconfig | 2 +- >> > drivers/video/mmp/hw/Kconfig | 2 +- >> > 3 files changed, 2 insertions(+), 3 deletions(-) >> > >> > diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig >> > index 7d1451d..b9b1c52 100644 >> > --- a/drivers/usb/phy/Kconfig >> > +++ b/drivers/usb/phy/Kconfig >> > @@ -61,7 +61,6 @@ config KEYSTONE_USB_PHY >> > >> > config MV_U3D_PHY >> > bool "Marvell USB 3.0 PHY controller Driver" >> > - depends on CPU_MMP3 >> > select USB_PHY >> > help >> > Enable this to support Marvell USB 3.0 phy controller for Marvell >> >> Do this and the driver breaks the build so it needs to depend on >> something: >> >> drivers/usb/phy/phy-mv-u3d-usb.c: In function ‘mv_u3d_phy_read’: >> drivers/usb/phy/phy-mv-u3d-usb.c:42:2: error: implicit declaration of function ‘writel_relaxed’ [-Werror=implicit-function-declaration] > > This sort of proves that a driver that depends on an unknown Kconfig > symbol gets no build coverage (and will bit rot). > >> Sorry, I can't take this as-is. > > My mistake, I should have spotted this when looking a Richard's patch. > > Some background (which I quickly dug up): config MV_U3D_PHY got added in > v3.7 through commit a67e76ac904c ("usb: phy: mv_u3d: Add usb phy driver > for mv_u3d"). It then depended on USB_MV_U3D. And that symbol depended > on CPU_MMP3 at that time. Ie, MV_U3D_PHY was unbuildable when it was > added. > > In commit 60630c2eabd4 ("usb: gadget: mv_u3d: drop ARCH dependency") > MV_U3D_PHY was made depended directly on CPU_MMP3. That kept it > unbuildable, of course. > > Richard, assuming you agree with the above short history of MV_U3D_PHY, > would you mind sending a v2 that removes this unbuildable driver? Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds ^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH 07/28] Remove CPU_PXA988 [not found] <1391971686-9517-1-git-send-email-richard@nod.at> 2014-02-09 18:47 ` [PATCH 01/28] Remove CPU_MMP3 Richard Weinberger @ 2014-02-09 18:47 ` Richard Weinberger 2014-02-09 22:24 ` Paul Bolle 1 sibling, 1 reply; 9+ messages in thread From: Richard Weinberger @ 2014-02-09 18:47 UTC (permalink / raw) To: Jean-Christophe Plagniol-Villard, Tomi Valkeinen, open list:FRAMEBUFFER LAYER, open list Cc: Richard Weinberger The symbol is an orphan, get rid of it. Signed-off-by: Richard Weinberger <richard@nod.at> --- drivers/video/mmp/Kconfig | 2 +- drivers/video/mmp/hw/Kconfig | 2 +- drivers/video/mmp/hw/mmp_ctrl.h | 32 -------------------------------- 3 files changed, 2 insertions(+), 34 deletions(-) diff --git a/drivers/video/mmp/Kconfig b/drivers/video/mmp/Kconfig index 969925d..f37bd6c 100644 --- a/drivers/video/mmp/Kconfig +++ b/drivers/video/mmp/Kconfig @@ -1,6 +1,6 @@ menuconfig MMP_DISP tristate "Marvell MMP Display Subsystem support" - depends on CPU_PXA910 || CPU_MMP2 || CPU_PXA988 + depends on CPU_PXA910 || CPU_MMP2 help Marvell Display Subsystem support. diff --git a/drivers/video/mmp/hw/Kconfig b/drivers/video/mmp/hw/Kconfig index 57b03e2..95e8ec2 100644 --- a/drivers/video/mmp/hw/Kconfig +++ b/drivers/video/mmp/hw/Kconfig @@ -2,7 +2,7 @@ if MMP_DISP config MMP_DISP_CONTROLLER bool "mmp display controller hw support" - depends on CPU_PXA910 || CPU_MMP2 || CPU_PXA988 + depends on CPU_PXA910 || CPU_MMP2 default n help Marvell MMP display hw controller support diff --git a/drivers/video/mmp/hw/mmp_ctrl.h b/drivers/video/mmp/hw/mmp_ctrl.h index 53301cf..56fdeab 100644 --- a/drivers/video/mmp/hw/mmp_ctrl.h +++ b/drivers/video/mmp/hw/mmp_ctrl.h @@ -167,11 +167,7 @@ struct lcd_regs { PN2_IOPAD_CONTROL) : LCD_TOP_CTRL) /* dither configure */ -#ifdef CONFIG_CPU_PXA988 -#define LCD_DITHER_CTRL (0x01EC) -#else #define LCD_DITHER_CTRL (0x00A0) -#endif #define DITHER_TBL_INDEX_SEL(s) ((s) << 16) #define DITHER_MODE2(m) ((m) << 12) @@ -186,15 +182,6 @@ struct lcd_regs { #define DITHER_EN1 (1) /* dither table data was fixed by video bpp of input and output*/ -#ifdef CONFIG_CPU_PXA988 -#define DITHER_TB_4X4_INDEX0 (0x6e4ca280) -#define DITHER_TB_4X4_INDEX1 (0x5d7f91b3) -#define DITHER_TB_4X8_INDEX0 (0xb391a280) -#define DITHER_TB_4X8_INDEX1 (0x7f5d6e4c) -#define DITHER_TB_4X8_INDEX2 (0x80a291b3) -#define DITHER_TB_4X8_INDEX3 (0x4c6e5d7f) -#define LCD_DITHER_TBL_DATA (0x01F0) -#else #define DITHER_TB_4X4_INDEX0 (0x3b19f7d5) #define DITHER_TB_4X4_INDEX1 (0x082ac4e6) #define DITHER_TB_4X8_INDEX0 (0xf7d508e6) @@ -202,7 +189,6 @@ struct lcd_regs { #define DITHER_TB_4X8_INDEX2 (0xc4e6d5f7) #define DITHER_TB_4X8_INDEX3 (0x082a193b) #define LCD_DITHER_TBL_DATA (0x00A4) -#endif /* Video Frame 0&1 start address registers */ #define LCD_SPU_DMA_START_ADDR_Y0 0x00C0 @@ -933,16 +919,9 @@ struct lcd_regs { #define LCD_PN2_SQULN2_CTRL (0x02F0) #define ALL_LAYER_ALPHA_SEL (0x02F4) -/* pxa988 has different MASTER_CTRL from MMP3/MMP2 */ -#ifdef CONFIG_CPU_PXA988 -#define TIMING_MASTER_CONTROL (0x01F4) -#define MASTER_ENH(id) (1 << ((id) + 5)) -#define MASTER_ENV(id) (1 << ((id) + 6)) -#else #define TIMING_MASTER_CONTROL (0x02F8) #define MASTER_ENH(id) (1 << (id)) #define MASTER_ENV(id) (1 << ((id) + 4)) -#endif #define DSI_START_SEL_SHIFT(id) (((id) << 1) + 8) #define timing_master_config(path, dsi_id, lcd_id) \ @@ -1312,19 +1291,8 @@ struct dsi_regs { #define DSI_PHY_TIME_3_CFG_CSR_TIME_REQRDY_MASK (0xff) #define DSI_PHY_TIME_3_CFG_CSR_TIME_REQRDY_SHIFT 0 -/* - * DSI timings - * PXA988 has diffrent ESC CLK with MMP2/MMP3 - * it will be used in dsi_set_dphy() in pxa688_phy.c - * as low power mode clock. - */ -#ifdef CONFIG_CPU_PXA988 -#define DSI_ESC_CLK 52 /* Unit: Mhz */ -#define DSI_ESC_CLK_T 19 /* Unit: ns */ -#else #define DSI_ESC_CLK 66 /* Unit: Mhz */ #define DSI_ESC_CLK_T 15 /* Unit: ns */ -#endif /* LVDS */ /* LVDS_PHY_CTRL */ -- 1.8.4.2 ^ permalink raw reply related [flat|nested] 9+ messages in thread
* Re: [PATCH 07/28] Remove CPU_PXA988 2014-02-09 18:47 ` [PATCH 07/28] Remove CPU_PXA988 Richard Weinberger @ 2014-02-09 22:24 ` Paul Bolle [not found] ` <52F800B2.6010702@nod.at> 0 siblings, 1 reply; 9+ messages in thread From: Paul Bolle @ 2014-02-09 22:24 UTC (permalink / raw) To: Richard Weinberger Cc: Jean-Christophe Plagniol-Villard, Tomi Valkeinen, open list:FRAMEBUFFER LAYER, open list On Sun, 2014-02-09 at 19:47 +0100, Richard Weinberger wrote: > The symbol is an orphan, get rid of it. > > Signed-off-by: Richard Weinberger <richard@nod.at> This one first entered the tree in v3.9, with commit 59393bb94c10 ("video: mmp display subsystem"). The Kconfig symbol has not yet been added. > drivers/video/mmp/Kconfig | 2 +- > drivers/video/mmp/hw/Kconfig | 2 +- > drivers/video/mmp/hw/mmp_ctrl.h | 32 -------------------------------- > 3 files changed, 2 insertions(+), 34 deletions(-) > > [..] > > diff --git a/drivers/video/mmp/hw/Kconfig b/drivers/video/mmp/hw/Kconfig > index 57b03e2..95e8ec2 100644 > --- a/drivers/video/mmp/hw/Kconfig > +++ b/drivers/video/mmp/hw/Kconfig > @@ -2,7 +2,7 @@ if MMP_DISP > > config MMP_DISP_CONTROLLER > bool "mmp display controller hw support" > - depends on CPU_PXA910 || CPU_MMP2 || CPU_PXA988 > + depends on CPU_PXA910 || CPU_MMP2 > default n > help > Marvell MMP display hw controller support Please also remove the reference to PXA988 in the help text. Aside from that: Acked-by: Paul Bolle <pebolle@tiscali.nl> Paul Bolle ^ permalink raw reply [flat|nested] 9+ messages in thread
[parent not found: <52F800B2.6010702@nod.at>]
* Re: [PATCH 07/28] Remove CPU_PXA988 [not found] ` <52F800B2.6010702@nod.at> @ 2014-04-15 7:47 ` Paul Bolle 2014-04-15 7:50 ` Richard Weinberger 0 siblings, 1 reply; 9+ messages in thread From: Paul Bolle @ 2014-04-15 7:47 UTC (permalink / raw) To: Richard Weinberger Cc: Jean-Christophe Plagniol-Villard, Tomi Valkeinen, FRAMEBUFFER LAYER, open list Richard, On Sun, 2014-02-09 at 23:26 +0100, Richard Weinberger wrote: > Am 09.02.2014 23:24, schrieb Paul Bolle: > > On Sun, 2014-02-09 at 19:47 +0100, Richard Weinberger wrote: > >> The symbol is an orphan, get rid of it. > >> > >> Signed-off-by: Richard Weinberger <richard@nod.at> > > > > This one first entered the tree in v3.9, with commit 59393bb94c10 > > ("video: mmp display subsystem"). The Kconfig symbol has not yet been > > added. > > Thanks a lot for digging out the background info! > I'll add them to the commit message. Did you ever find the time to update the commit message? If not, should I submit an updated version of this patch? Paul Bolle ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH 07/28] Remove CPU_PXA988 2014-04-15 7:47 ` Paul Bolle @ 2014-04-15 7:50 ` Richard Weinberger 0 siblings, 0 replies; 9+ messages in thread From: Richard Weinberger @ 2014-04-15 7:50 UTC (permalink / raw) To: Paul Bolle Cc: Jean-Christophe Plagniol-Villard, Tomi Valkeinen, FRAMEBUFFER LAYER, open list Am 15.04.2014 09:47, schrieb Paul Bolle: > Richard, > > On Sun, 2014-02-09 at 23:26 +0100, Richard Weinberger wrote: >> Am 09.02.2014 23:24, schrieb Paul Bolle: >>> On Sun, 2014-02-09 at 19:47 +0100, Richard Weinberger wrote: >>>> The symbol is an orphan, get rid of it. >>>> >>>> Signed-off-by: Richard Weinberger <richard@nod.at> >>> >>> This one first entered the tree in v3.9, with commit 59393bb94c10 >>> ("video: mmp display subsystem"). The Kconfig symbol has not yet been >>> added. >> >> Thanks a lot for digging out the background info! >> I'll add them to the commit message. > > Did you ever find the time to update the commit message? If not, should > I submit an updated version of this patch? Sadly not. Feel free to take this (and other related) patches over. Thanks a lot for caring! Thanks, //richard ^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2014-04-15 7:50 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <1391971686-9517-1-git-send-email-richard@nod.at>
2014-02-09 18:47 ` [PATCH 01/28] Remove CPU_MMP3 Richard Weinberger
2014-02-09 22:07 ` Paul Bolle
2014-02-11 21:30 ` Greg Kroah-Hartman
2014-02-11 22:01 ` Paul Bolle
2014-02-12 7:52 ` Geert Uytterhoeven
2014-02-09 18:47 ` [PATCH 07/28] Remove CPU_PXA988 Richard Weinberger
2014-02-09 22:24 ` Paul Bolle
[not found] ` <52F800B2.6010702@nod.at>
2014-04-15 7:47 ` Paul Bolle
2014-04-15 7:50 ` Richard Weinberger
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).