[RFC 1/6] omapdss: remove check for simpler port/endpoint binding

[RFC 1/6] omapdss: remove check for simpler port/endpoint binding

[Archit Taneja]

The support for simpler port/endpoint binding was removed in the merged version
of omapdss DT. But dss_init_ports still tries to get to an endpoint even if no
port exists. Remove this as this doesn't work.

Signed-off-by: Archit Taneja <archit@ti.com>
---
 drivers/video/fbdev/omap2/dss/dss.c | 6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)

diff --git a/drivers/video/fbdev/omap2/dss/dss.c b/drivers/video/fbdev/omap2/dss/dss.c
index d55266c..31ef262 100644
--- a/drivers/video/fbdev/omap2/dss/dss.c
+++ b/drivers/video/fbdev/omap2/dss/dss.c
@@ -784,12 +784,8 @@ static int __init dss_init_ports(struct platform_device *pdev)
 		return 0;
 
 	port = omapdss_of_get_next_port(parent, NULL);
-	if (!port) {
-#ifdef CONFIG_OMAP2_DSS_DPI
-		dpi_init_port(pdev, parent);
-#endif
+	if (!port)
 		return 0;
-	}
 
 	do {
 		u32 reg;
-- 
1.8.3.2

[RFC 2/6] omapdss: add init port functions for different omap revs

[Archit Taneja]

The init/uninit port functions are used to set up the DPI and SDI outputs under
the dss platform device. A 'reg' property is used to determine whether the node
is DPI or SDI for OMAP34xx DSS revision. For other DSS revisions, only DPI
output exists.

For multiple DPI output instances(introduced in DRA7xx DSS), we would use the
'reg' property to specify the DPI output number.

The current functions work fine if there is only one DPI output instance in
DSS. For multiple DPI instances, it would get complicated to figure out whether
'reg' is used to specify whether the output is SDI, or a later DPI instance.

Create DSS revision specific init/uninit_port functions such that we have a
separate functions for OMAP34xx, this helps us deal with the SDI case
separately.

Also, make the uninit_port functions iterative since we will have multiple DPI
ports in the future.

dpi_uninit_port/sdi_uninit_port functions have to be removed from the exit
section as dss_features(which is initconst data) uses it, this prevents the
section mismatch.

Signed-off-by: Archit Taneja <archit@ti.com>
---
 drivers/video/fbdev/omap2/dss/dpi.c |  2 +-
 drivers/video/fbdev/omap2/dss/dss.c | 88 ++++++++++++++++++++++++++++++++++---
 drivers/video/fbdev/omap2/dss/dss.h |  4 +-
 drivers/video/fbdev/omap2/dss/sdi.c |  2 +-
 4 files changed, 86 insertions(+), 10 deletions(-)

diff --git a/drivers/video/fbdev/omap2/dss/dpi.c b/drivers/video/fbdev/omap2/dss/dpi.c
index 157921d..6593c8b 100644
--- a/drivers/video/fbdev/omap2/dss/dpi.c
+++ b/drivers/video/fbdev/omap2/dss/dpi.c
@@ -765,7 +765,7 @@ err_datalines:
 	return r;
 }
 
-void __exit dpi_uninit_port(void)
+void dpi_uninit_port(struct platform_device *pdev, struct device_node *port)
 {
 	if (!dpi.port_initialized)
 		return;
diff --git a/drivers/video/fbdev/omap2/dss/dss.c b/drivers/video/fbdev/omap2/dss/dss.c
index 31ef262..c415029 100644
--- a/drivers/video/fbdev/omap2/dss/dss.c
+++ b/drivers/video/fbdev/omap2/dss/dss.c
@@ -65,12 +65,18 @@ struct dss_reg {
 
 static int dss_runtime_get(void);
 static void dss_runtime_put(void);
+static int __init dss_init_ports(struct platform_device *pdev);
+static int __init dss_init_ports_omap34xx(struct platform_device *pdev);
+static void dss_uninit_ports(struct platform_device *pdev);
+static void dss_uninit_ports_omap34xx(struct platform_device *pdev);
 
 struct dss_features {
 	u8 fck_div_max;
 	u8 dss_fck_multiplier;
 	const char *parent_clk_name;
 	int (*dpi_select_source)(enum omap_channel channel);
+	int (*init_ports)(struct platform_device *pdev);
+	void (*uninit_ports)(struct platform_device *pdev);
 };
 
 static struct {
@@ -698,6 +704,8 @@ static const struct dss_features omap24xx_dss_feats __initconst = {
 	.dss_fck_multiplier	=	2,
 	.parent_clk_name	=	"core_ck",
 	.dpi_select_source	=	&dss_dpi_select_source_omap2_omap3,
+	.init_ports		=	&dss_init_ports,
+	.uninit_ports		=	&dss_uninit_ports,
 };
 
 static const struct dss_features omap34xx_dss_feats __initconst = {
@@ -705,6 +713,8 @@ static const struct dss_features omap34xx_dss_feats __initconst = {
 	.dss_fck_multiplier	=	2,
 	.parent_clk_name	=	"dpll4_ck",
 	.dpi_select_source	=	&dss_dpi_select_source_omap2_omap3,
+	.init_ports		=	&dss_init_ports_omap34xx,
+	.uninit_ports		=	&dss_uninit_ports_omap34xx,
 };
 
 static const struct dss_features omap3630_dss_feats __initconst = {
@@ -712,6 +722,8 @@ static const struct dss_features omap3630_dss_feats __initconst = {
 	.dss_fck_multiplier	=	1,
 	.parent_clk_name	=	"dpll4_ck",
 	.dpi_select_source	=	&dss_dpi_select_source_omap2_omap3,
+	.init_ports		=	&dss_init_ports,
+	.uninit_ports		=	&dss_uninit_ports,
 };
 
 static const struct dss_features omap44xx_dss_feats __initconst = {
@@ -719,6 +731,8 @@ static const struct dss_features omap44xx_dss_feats __initconst = {
 	.dss_fck_multiplier	=	1,
 	.parent_clk_name	=	"dpll_per_x2_ck",
 	.dpi_select_source	=	&dss_dpi_select_source_omap4,
+	.init_ports		=	&dss_init_ports,
+	.uninit_ports		=	&dss_uninit_ports,
 };
 
 static const struct dss_features omap54xx_dss_feats __initconst = {
@@ -726,6 +740,8 @@ static const struct dss_features omap54xx_dss_feats __initconst = {
 	.dss_fck_multiplier	=	1,
 	.parent_clk_name	=	"dpll_per_x2_ck",
 	.dpi_select_source	=	&dss_dpi_select_source_omap5,
+	.init_ports		=	&dss_init_ports,
+	.uninit_ports		=	&dss_uninit_ports,
 };
 
 static int __init dss_init_features(struct platform_device *pdev)
@@ -774,7 +790,7 @@ static int __init dss_init_features(struct platform_device *pdev)
 	return 0;
 }
 
-static int __init dss_init_ports(struct platform_device *pdev)
+static int __init dss_init_ports_omap34xx(struct platform_device *pdev)
 {
 	struct device_node *parent = pdev->dev.of_node;
 	struct device_node *port;
@@ -809,15 +825,75 @@ static int __init dss_init_ports(struct platform_device *pdev)
 	return 0;
 }
 
-static void dss_uninit_ports(void)
+static int __init dss_init_ports(struct platform_device *pdev)
 {
+	struct device_node *parent = pdev->dev.of_node;
+	struct device_node *port;
+
+	if (parent = NULL)
+		return 0;
+
+	port = omapdss_of_get_next_port(parent, NULL);
+	if (!port)
+		return 0;
+
+	do {
 #ifdef CONFIG_OMAP2_DSS_DPI
-	dpi_uninit_port();
+			dpi_init_port(pdev, port);
+#endif
+	} while ((port = omapdss_of_get_next_port(parent, port)) != NULL);
+
+	return 0;
+}
+
+static void dss_uninit_ports_omap34xx(struct platform_device *pdev)
+{
+	struct device_node *parent = pdev->dev.of_node;
+	struct device_node *port;
+	int r;
+
+	if (parent = NULL)
+		return;
+
+	port = omapdss_of_get_next_port(parent, NULL);
+	if (!port)
+		return;
+
+	do {
+		u32 reg;
+
+		r = of_property_read_u32(port, "reg", &reg);
+		if (r)
+			reg = 0;
+
+#ifdef CONFIG_OMAP2_DSS_DPI
+		if (reg = 0)
+			dpi_uninit_port(pdev, port);
 #endif
 
 #ifdef CONFIG_OMAP2_DSS_SDI
-	sdi_uninit_port();
+		if (reg = 1)
+			sdi_uninit_port();
 #endif
+	} while ((port = omapdss_of_get_next_port(parent, port)) != NULL);
+}
+
+static void dss_uninit_ports(struct platform_device *pdev)
+{
+	struct device_node *parent = pdev->dev.of_node;
+	struct device_node *port;
+
+	if (parent = NULL)
+		return;
+
+	port = omapdss_of_get_next_port(parent, NULL);
+	if (!port)
+		return;
+	do {
+#ifdef CONFIG_OMAP2_DSS_DPI
+			dpi_uninit_port(pdev, port);
+#endif
+	} while ((port = omapdss_of_get_next_port(parent, port)) != NULL);
 }
 
 /* DSS HW IP initialisation */
@@ -878,7 +954,7 @@ static int __init omap_dsshw_probe(struct platform_device *pdev)
 	dss.lcd_clk_source[0] = OMAP_DSS_CLK_SRC_FCK;
 	dss.lcd_clk_source[1] = OMAP_DSS_CLK_SRC_FCK;
 
-	dss_init_ports(pdev);
+	dss.feat->init_ports(pdev);
 
 	rev = dss_read_reg(DSS_REVISION);
 	printk(KERN_INFO "OMAP DSS rev %d.%d\n",
@@ -899,7 +975,7 @@ err_setup_clocks:
 
 static int __exit omap_dsshw_remove(struct platform_device *pdev)
 {
-	dss_uninit_ports();
+	dss.feat->uninit_ports(pdev);
 
 	pm_runtime_disable(&pdev->dev);
 
diff --git a/drivers/video/fbdev/omap2/dss/dss.h b/drivers/video/fbdev/omap2/dss/dss.h
index 560078f..9f4ee49 100644
--- a/drivers/video/fbdev/omap2/dss/dss.h
+++ b/drivers/video/fbdev/omap2/dss/dss.h
@@ -245,7 +245,7 @@ int sdi_init_platform_driver(void) __init;
 void sdi_uninit_platform_driver(void) __exit;
 
 int sdi_init_port(struct platform_device *pdev, struct device_node *port) __init;
-void sdi_uninit_port(void) __exit;
+void sdi_uninit_port(void);
 
 /* DSI */
 
@@ -359,7 +359,7 @@ int dpi_init_platform_driver(void) __init;
 void dpi_uninit_platform_driver(void) __exit;
 
 int dpi_init_port(struct platform_device *pdev, struct device_node *port) __init;
-void dpi_uninit_port(void) __exit;
+void dpi_uninit_port(struct platform_device *pdev, struct device_node *port);
 
 /* DISPC */
 int dispc_init_platform_driver(void) __init;
diff --git a/drivers/video/fbdev/omap2/dss/sdi.c b/drivers/video/fbdev/omap2/dss/sdi.c
index 911dcc9..71a3083 100644
--- a/drivers/video/fbdev/omap2/dss/sdi.c
+++ b/drivers/video/fbdev/omap2/dss/sdi.c
@@ -424,7 +424,7 @@ err_datapairs:
 	return r;
 }
 
-void __exit sdi_uninit_port(void)
+void sdi_uninit_port(void)
 {
 	if (!sdi.port_initialized)
 		return;
-- 
1.8.3.2

Re: [RFC 2/6] omapdss: add init port functions for different omap revs

[Tomi Valkeinen]

[-- Attachment #1: Type: text/plain, Size: 1163 bytes --]

On 08/05/14 12:15, Archit Taneja wrote:
> The init/uninit port functions are used to set up the DPI and SDI outputs under
> the dss platform device. A 'reg' property is used to determine whether the node
> is DPI or SDI for OMAP34xx DSS revision. For other DSS revisions, only DPI
> output exists.
> 
> For multiple DPI output instances(introduced in DRA7xx DSS), we would use the
> 'reg' property to specify the DPI output number.
> 
> The current functions work fine if there is only one DPI output instance in
> DSS. For multiple DPI instances, it would get complicated to figure out whether
> 'reg' is used to specify whether the output is SDI, or a later DPI instance.
> 
> Create DSS revision specific init/uninit_port functions such that we have a
> separate functions for OMAP34xx, this helps us deal with the SDI case
> separately.

Could we instead have an array of the ports for the said DSS version,
assigned to dss_features? Maybe just something like:

static enum omap_display_type omap34xx_ports[] = {
	OMAP_DISPLAY_TYPE_DPI,
	OMAP_DISPLAY_TYPE_SDI,
};

The index on the array tells the matching 'reg' value.

 Tomi



[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

Re: [RFC 2/6] omapdss: add init port functions for different omap revs

[Archit Taneja]

On Tuesday 20 May 2014 01:34 PM, Tomi Valkeinen wrote:
> On 08/05/14 12:15, Archit Taneja wrote:
>> The init/uninit port functions are used to set up the DPI and SDI outputs under
>> the dss platform device. A 'reg' property is used to determine whether the node
>> is DPI or SDI for OMAP34xx DSS revision. For other DSS revisions, only DPI
>> output exists.
>>
>> For multiple DPI output instances(introduced in DRA7xx DSS), we would use the
>> 'reg' property to specify the DPI output number.
>>
>> The current functions work fine if there is only one DPI output instance in
>> DSS. For multiple DPI instances, it would get complicated to figure out whether
>> 'reg' is used to specify whether the output is SDI, or a later DPI instance.
>>
>> Create DSS revision specific init/uninit_port functions such that we have a
>> separate functions for OMAP34xx, this helps us deal with the SDI case
>> separately.
>
> Could we instead have an array of the ports for the said DSS version,
> assigned to dss_features? Maybe just something like:
>
> static enum omap_display_type omap34xx_ports[] = {
> 	OMAP_DISPLAY_TYPE_DPI,
> 	OMAP_DISPLAY_TYPE_SDI,
> };
>
> The index on the array tells the matching 'reg' value.

Oh yeah! That should prevent us creating ops. It would require us to 
create a ports pointer in dss_features, but it's certainly much better 
than having 2 very similar functions.

Archit

[RFC 3/6] omapdss: DT: Get source endpoint by matching reg-id

[Archit Taneja]

In omapdss_of_find_source_for_first_ep, we retrieve a source endpoint's DT node,
and then see what omapdss output has the matching device_node pointer in
omap_dss_find_output_by_node.

For all DPI and SDI outputs, the device_node pointer is set as the parent's DSS
device_node pointer. If the source is one of these outputs, the above method
won't work.

To get the correct output for ports within DSS with the existing omapdss DT
framework, we check in omapdss_of_find_source_for_first_ep, whether the source
node is of the DSS parent device. If so, we take an extra step of extracting
the 'reg' property from the port corresponding to the endpoint source, and get
the omap_dss_device output by matching both device_node and reg-id.

We would want to get rid of this eventually, and support multiple ports in
general. That would involve making some more changes the omapdss DT
framework.

Signed-off-by: Archit Taneja <archit@ti.com>
---
 drivers/video/fbdev/omap2/dss/dss-of.c | 41 ++++++++++++++++++++++++++++++----
 drivers/video/fbdev/omap2/dss/dss.c    |  6 +++++
 drivers/video/fbdev/omap2/dss/dss.h    |  2 ++
 drivers/video/fbdev/omap2/dss/output.c | 15 +++++++++++++
 include/video/omapdss.h                |  6 +++++
 5 files changed, 66 insertions(+), 4 deletions(-)

diff --git a/drivers/video/fbdev/omap2/dss/dss-of.c b/drivers/video/fbdev/omap2/dss/dss-of.c
index a4b20aa..4261c14 100644
--- a/drivers/video/fbdev/omap2/dss/dss-of.c
+++ b/drivers/video/fbdev/omap2/dss/dss-of.c
@@ -19,6 +19,7 @@
 #include <linux/seq_file.h>
 
 #include <video/omapdss.h>
+#include "dss.h"
 
 struct device_node *
 omapdss_of_get_next_port(const struct device_node *parent,
@@ -142,12 +143,44 @@ omapdss_of_find_source_for_first_ep(struct device_node *node)
 
 	src_node = omapdss_of_get_remote_device_node(ep);
 
-	of_node_put(ep);
-
-	if (!src_node)
+	if (!src_node) {
+		of_node_put(ep);
 		return ERR_PTR(-EINVAL);
+	}
 
-	src = omap_dss_find_output_by_node(src_node);
+	/*
+	 * TODO: Find a better solution for this.
+	 *
+	 * DPI and SDI outputs share the same DSS device node. In order to find
+	 * the correct omap_dss_device output, we need to match the reg-id
+	 * property of the DPI/SDI port.
+	 *
+	 * For the special case of device_node being the parent DSS device, make
+	 * sure we check for both device_node and reg-id to get the correct
+	 * source
+	 */
+	if (src_node = dss_device_node()) {
+		struct device_node *src_port;
+		u32 reg;
+		int r;
+
+		src_port = of_parse_phandle(ep, "remote-endpoint", 0);
+
+		/* the parent of the endpoint is always the port node */
+		src_port = of_get_next_parent(src_port);
+
+		r = of_property_read_u32(src_port, "reg", &reg);
+		if (r)
+			reg = 0;
+
+		of_node_put(src_port);
+
+		src = omap_dss_find_output_by_node_and_reg(src_node, reg);
+	} else {
+		src = omap_dss_find_output_by_node(src_node);
+	}
+
+	of_node_put(ep);
 
 	of_node_put(src_node);
 
diff --git a/drivers/video/fbdev/omap2/dss/dss.c b/drivers/video/fbdev/omap2/dss/dss.c
index c415029..4087f3b 100644
--- a/drivers/video/fbdev/omap2/dss/dss.c
+++ b/drivers/video/fbdev/omap2/dss/dss.c
@@ -790,6 +790,12 @@ static int __init dss_init_features(struct platform_device *pdev)
 	return 0;
 }
 
+/* of_node pointer for the DSS parent node */
+struct device_node *dss_device_node(void)
+{
+	return dss.pdev->dev.of_node;
+}
+
 static int __init dss_init_ports_omap34xx(struct platform_device *pdev)
 {
 	struct device_node *parent = pdev->dev.of_node;
diff --git a/drivers/video/fbdev/omap2/dss/dss.h b/drivers/video/fbdev/omap2/dss/dss.h
index 9f4ee49..6f68f72 100644
--- a/drivers/video/fbdev/omap2/dss/dss.h
+++ b/drivers/video/fbdev/omap2/dss/dss.h
@@ -240,6 +240,8 @@ typedef bool (*dss_div_calc_func)(unsigned long fck, void *data);
 bool dss_div_calc(unsigned long pck, unsigned long fck_min,
 		dss_div_calc_func func, void *data);
 
+struct device_node *dss_device_node(void);
+
 /* SDI */
 int sdi_init_platform_driver(void) __init;
 void sdi_uninit_platform_driver(void) __exit;
diff --git a/drivers/video/fbdev/omap2/dss/output.c b/drivers/video/fbdev/omap2/dss/output.c
index 2ab3afa..2b556f1 100644
--- a/drivers/video/fbdev/omap2/dss/output.c
+++ b/drivers/video/fbdev/omap2/dss/output.c
@@ -144,6 +144,21 @@ struct omap_dss_device *omap_dss_find_output_by_node(struct device_node *node)
 }
 EXPORT_SYMBOL(omap_dss_find_output_by_node);
 
+struct omap_dss_device
+		*omap_dss_find_output_by_node_and_reg(struct device_node *node,
+		u32 reg)
+{
+	struct omap_dss_device *out;
+
+	list_for_each_entry(out, &output_list, list) {
+		if (out->dev->of_node = node && out->reg = reg)
+			return omap_dss_get_device(out);
+	}
+
+	return NULL;
+}
+EXPORT_SYMBOL(omap_dss_find_output_by_node_and_reg);
+
 struct omap_dss_device *omapdss_find_output_from_display(struct omap_dss_device *dssdev)
 {
 	while (dssdev->src)
diff --git a/include/video/omapdss.h b/include/video/omapdss.h
index 6adb445..7ce2d83 100644
--- a/include/video/omapdss.h
+++ b/include/video/omapdss.h
@@ -789,6 +789,9 @@ struct omap_dss_device {
 	/* output instance */
 	enum omap_dss_output_id id;
 
+	/* the <reg> value in the DT node */
+	int reg;
+
 	/* dynamic fields */
 	struct omap_overlay_manager *manager;
 
@@ -909,6 +912,9 @@ void omapdss_unregister_output(struct omap_dss_device *output);
 struct omap_dss_device *omap_dss_get_output(enum omap_dss_output_id id);
 struct omap_dss_device *omap_dss_find_output(const char *name);
 struct omap_dss_device *omap_dss_find_output_by_node(struct device_node *node);
+struct omap_dss_device
+		*omap_dss_find_output_by_node_and_reg(struct device_node *node,
+		u32 reg);
 int omapdss_output_set_device(struct omap_dss_device *out,
 		struct omap_dss_device *dssdev);
 int omapdss_output_unset_device(struct omap_dss_device *out);
-- 
1.8.3.2

[RFC 4/6] omapdss: DPI: support multiple DPI instances

[Archit Taneja]

SoCs containing DSS until now had only one DPI instance. DRA7x has 3 DPI
instances.

In order to support multiple instances, we allocate a driver data
struct(dpi_data) for each instance. This is somewhat similar to how DSI driver
was changed to support multiple instances.

One difference is that there are no platform devices for each instance when DT
is used. In the DT case, we store the dpi_data pointer in the DPI port's
(of the type struct device_node) data pointer. In the non DT case, we still
have dummy platform devices, and the device's private data pointer is used to
store the DPI instance's dpi_data.

When an encoder/panel driver calls a dpi op, we get dpi_data using the function
dpi_get_data_from_dssdev. This function iterates through the ports under DSS
device node, and returns the port which has reg-id matching the reg-id specified
in omap_dss_device.

Signed-off-by: Archit Taneja <archit@ti.com>
---
 drivers/video/fbdev/omap2/dss/dpi.c | 282 +++++++++++++++++++++++++-----------
 1 file changed, 200 insertions(+), 82 deletions(-)

diff --git a/drivers/video/fbdev/omap2/dss/dpi.c b/drivers/video/fbdev/omap2/dss/dpi.c
index 6593c8b..b891e17 100644
--- a/drivers/video/fbdev/omap2/dss/dpi.c
+++ b/drivers/video/fbdev/omap2/dss/dpi.c
@@ -37,7 +37,7 @@
 #include "dss.h"
 #include "dss_features.h"
 
-static struct {
+struct dpi_data {
 	struct platform_device *pdev;
 
 	struct regulator *vdds_dsi_reg;
@@ -52,7 +52,45 @@ static struct {
 	struct omap_dss_device output;
 
 	bool port_initialized;
-} dpi;
+};
+
+static struct dpi_data *dpi_get_data_from_dssdev(struct omap_dss_device *dssdev)
+{
+	struct device_node *parent = dssdev->dev->of_node;
+	struct device_node *port;
+
+	/* non DT */
+	if (!parent) {
+		struct omap_dss_device *out = dssdev->src;
+
+		return dev_get_drvdata(out->dev);
+	}
+
+	port = omapdss_of_get_next_port(parent, NULL);
+	if (!port)
+		return NULL;
+
+	do {
+		int r;
+		u32 reg;
+
+		r = of_property_read_u32(port, "reg", &reg);
+		if (r)
+			reg = 0;
+
+		if (reg = dssdev->reg)
+			return port->data;
+
+	} while ((port = omapdss_of_get_next_port(parent, port)) != NULL);
+
+	return NULL;
+}
+
+/* use only for non DT mode */
+static struct dpi_data *dpi_get_data_from_pdev(struct platform_device *pdev)
+{
+	return dev_get_drvdata(&pdev->dev);
+}
 
 static struct platform_device *dpi_get_dsidev(enum omap_channel channel)
 {
@@ -197,15 +235,16 @@ static bool dpi_calc_dss_cb(unsigned long fck, void *data)
 			dpi_calc_dispc_cb, ctx);
 }
 
-static bool dpi_dsi_clk_calc(unsigned long pck, struct dpi_clk_calc_ctx *ctx)
+static bool dpi_dsi_clk_calc(struct dpi_data *dpi, unsigned long pck,
+		struct dpi_clk_calc_ctx *ctx)
 {
 	unsigned long clkin;
 	unsigned long pll_min, pll_max;
 
-	clkin = dsi_get_pll_clkin(dpi.dsidev);
+	clkin = dsi_get_pll_clkin(dpi->dsidev);
 
 	memset(ctx, 0, sizeof(*ctx));
-	ctx->dsidev = dpi.dsidev;
+	ctx->dsidev = dpi->dsidev;
 	ctx->pck_min = pck - 1000;
 	ctx->pck_max = pck + 1000;
 	ctx->dsi_cinfo.clkin = clkin;
@@ -213,7 +252,7 @@ static bool dpi_dsi_clk_calc(unsigned long pck, struct dpi_clk_calc_ctx *ctx)
 	pll_min = 0;
 	pll_max = 0;
 
-	return dsi_pll_calc(dpi.dsidev, clkin,
+	return dsi_pll_calc(dpi->dsidev, clkin,
 			pll_min, pll_max,
 			dpi_calc_pll_cb, ctx);
 }
@@ -249,7 +288,7 @@ static bool dpi_dss_clk_calc(unsigned long pck, struct dpi_clk_calc_ctx *ctx)
 
 
 
-static int dpi_set_dsi_clk(enum omap_channel channel,
+static int dpi_set_dsi_clk(struct dpi_data *dpi, enum omap_channel channel,
 		unsigned long pck_req, unsigned long *fck, int *lck_div,
 		int *pck_div)
 {
@@ -257,18 +296,18 @@ static int dpi_set_dsi_clk(enum omap_channel channel,
 	int r;
 	bool ok;
 
-	ok = dpi_dsi_clk_calc(pck_req, &ctx);
+	ok = dpi_dsi_clk_calc(dpi, pck_req, &ctx);
 	if (!ok)
 		return -EINVAL;
 
-	r = dsi_pll_set_clock_div(dpi.dsidev, &ctx.dsi_cinfo);
+	r = dsi_pll_set_clock_div(dpi->dsidev, &ctx.dsi_cinfo);
 	if (r)
 		return r;
 
 	dss_select_lcd_clk_source(channel,
 			dpi_get_alt_clk_src(channel));
 
-	dpi.mgr_config.clock_info = ctx.dispc_cinfo;
+	dpi->mgr_config.clock_info = ctx.dispc_cinfo;
 
 	*fck = ctx.dsi_cinfo.dsi_pll_hsdiv_dispc_clk;
 	*lck_div = ctx.dispc_cinfo.lck_div;
@@ -277,8 +316,8 @@ static int dpi_set_dsi_clk(enum omap_channel channel,
 	return 0;
 }
 
-static int dpi_set_dispc_clk(unsigned long pck_req, unsigned long *fck,
-		int *lck_div, int *pck_div)
+static int dpi_set_dispc_clk(struct dpi_data *dpi, unsigned long pck_req,
+		unsigned long *fck, int *lck_div, int *pck_div)
 {
 	struct dpi_clk_calc_ctx ctx;
 	int r;
@@ -292,7 +331,7 @@ static int dpi_set_dispc_clk(unsigned long pck_req, unsigned long *fck,
 	if (r)
 		return r;
 
-	dpi.mgr_config.clock_info = ctx.dispc_cinfo;
+	dpi->mgr_config.clock_info = ctx.dispc_cinfo;
 
 	*fck = ctx.fck;
 	*lck_div = ctx.dispc_cinfo.lck_div;
@@ -301,19 +340,21 @@ static int dpi_set_dispc_clk(unsigned long pck_req, unsigned long *fck,
 	return 0;
 }
 
-static int dpi_set_mode(struct omap_overlay_manager *mgr)
+static int dpi_set_mode(struct dpi_data *dpi)
 {
-	struct omap_video_timings *t = &dpi.timings;
+	struct omap_dss_device *out = &dpi->output;
+	struct omap_overlay_manager *mgr = out->manager;
+	struct omap_video_timings *t = &dpi->timings;
 	int lck_div = 0, pck_div = 0;
 	unsigned long fck = 0;
 	unsigned long pck;
 	int r = 0;
 
-	if (dpi.dsidev)
-		r = dpi_set_dsi_clk(mgr->id, t->pixelclock, &fck,
+	if (dpi->dsidev)
+		r = dpi_set_dsi_clk(dpi, mgr->id, t->pixelclock, &fck,
 				&lck_div, &pck_div);
 	else
-		r = dpi_set_dispc_clk(t->pixelclock, &fck,
+		r = dpi_set_dispc_clk(dpi, t->pixelclock, &fck,
 				&lck_div, &pck_div);
 	if (r)
 		return r;
@@ -332,28 +373,32 @@ static int dpi_set_mode(struct omap_overlay_manager *mgr)
 	return 0;
 }
 
-static void dpi_config_lcd_manager(struct omap_overlay_manager *mgr)
+static void dpi_config_lcd_manager(struct dpi_data *dpi)
 {
-	dpi.mgr_config.io_pad_mode = DSS_IO_PAD_MODE_BYPASS;
+	struct omap_dss_device *out = &dpi->output;
+	struct omap_overlay_manager *mgr = out->manager;
 
-	dpi.mgr_config.stallmode = false;
-	dpi.mgr_config.fifohandcheck = false;
+	dpi->mgr_config.io_pad_mode = DSS_IO_PAD_MODE_BYPASS;
 
-	dpi.mgr_config.video_port_width = dpi.data_lines;
+	dpi->mgr_config.stallmode = false;
+	dpi->mgr_config.fifohandcheck = false;
 
-	dpi.mgr_config.lcden_sig_polarity = 0;
+	dpi->mgr_config.video_port_width = dpi->data_lines;
 
-	dss_mgr_set_lcd_config(mgr, &dpi.mgr_config);
+	dpi->mgr_config.lcden_sig_polarity = 0;
+
+	dss_mgr_set_lcd_config(mgr, &dpi->mgr_config);
 }
 
 static int dpi_display_enable(struct omap_dss_device *dssdev)
 {
-	struct omap_dss_device *out = &dpi.output;
+	struct dpi_data *dpi = dpi_get_data_from_dssdev(dssdev);
+	struct omap_dss_device *out = &dpi->output;
 	int r;
 
-	mutex_lock(&dpi.lock);
+	mutex_lock(&dpi->lock);
 
-	if (dss_has_feature(FEAT_DPI_USES_VDDS_DSI) && !dpi.vdds_dsi_reg) {
+	if (dss_has_feature(FEAT_DPI_USES_VDDS_DSI) && !dpi->vdds_dsi_reg) {
 		DSSERR("no VDSS_DSI regulator\n");
 		r = -ENODEV;
 		goto err_no_reg;
@@ -366,7 +411,7 @@ static int dpi_display_enable(struct omap_dss_device *dssdev)
 	}
 
 	if (dss_has_feature(FEAT_DPI_USES_VDDS_DSI)) {
-		r = regulator_enable(dpi.vdds_dsi_reg);
+		r = regulator_enable(dpi->vdds_dsi_reg);
 		if (r)
 			goto err_reg_enable;
 	}
@@ -379,21 +424,21 @@ static int dpi_display_enable(struct omap_dss_device *dssdev)
 	if (r)
 		goto err_src_sel;
 
-	if (dpi.dsidev) {
-		r = dsi_runtime_get(dpi.dsidev);
+	if (dpi->dsidev) {
+		r = dsi_runtime_get(dpi->dsidev);
 		if (r)
 			goto err_get_dsi;
 
-		r = dsi_pll_init(dpi.dsidev, 0, 1);
+		r = dsi_pll_init(dpi->dsidev, 0, 1);
 		if (r)
 			goto err_dsi_pll_init;
 	}
 
-	r = dpi_set_mode(out->manager);
+	r = dpi_set_mode(dpi);
 	if (r)
 		goto err_set_mode;
 
-	dpi_config_lcd_manager(out->manager);
+	dpi_config_lcd_manager(dpi);
 
 	mdelay(2);
 
@@ -401,78 +446,84 @@ static int dpi_display_enable(struct omap_dss_device *dssdev)
 	if (r)
 		goto err_mgr_enable;
 
-	mutex_unlock(&dpi.lock);
+	mutex_unlock(&dpi->lock);
 
 	return 0;
 
 err_mgr_enable:
 err_set_mode:
-	if (dpi.dsidev)
-		dsi_pll_uninit(dpi.dsidev, true);
+	if (dpi->dsidev)
+		dsi_pll_uninit(dpi->dsidev, true);
 err_dsi_pll_init:
-	if (dpi.dsidev)
-		dsi_runtime_put(dpi.dsidev);
+	if (dpi->dsidev)
+		dsi_runtime_put(dpi->dsidev);
 err_get_dsi:
 err_src_sel:
 	dispc_runtime_put();
 err_get_dispc:
 	if (dss_has_feature(FEAT_DPI_USES_VDDS_DSI))
-		regulator_disable(dpi.vdds_dsi_reg);
+		regulator_disable(dpi->vdds_dsi_reg);
 err_reg_enable:
 err_no_out_mgr:
 err_no_reg:
-	mutex_unlock(&dpi.lock);
+	mutex_unlock(&dpi->lock);
 	return r;
 }
 
 static void dpi_display_disable(struct omap_dss_device *dssdev)
 {
-	struct omap_overlay_manager *mgr = dpi.output.manager;
+	struct dpi_data *dpi = dpi_get_data_from_dssdev(dssdev);
+	struct omap_overlay_manager *mgr = dpi->output.manager;
 
-	mutex_lock(&dpi.lock);
+	mutex_lock(&dpi->lock);
 
 	dss_mgr_disable(mgr);
 
-	if (dpi.dsidev) {
+	if (dpi->dsidev) {
 		dss_select_lcd_clk_source(mgr->id, OMAP_DSS_CLK_SRC_FCK);
-		dsi_pll_uninit(dpi.dsidev, true);
-		dsi_runtime_put(dpi.dsidev);
+		dsi_pll_uninit(dpi->dsidev, true);
+		dsi_runtime_put(dpi->dsidev);
 	}
 
 	dispc_runtime_put();
 
 	if (dss_has_feature(FEAT_DPI_USES_VDDS_DSI))
-		regulator_disable(dpi.vdds_dsi_reg);
+		regulator_disable(dpi->vdds_dsi_reg);
 
-	mutex_unlock(&dpi.lock);
+	mutex_unlock(&dpi->lock);
 }
 
 static void dpi_set_timings(struct omap_dss_device *dssdev,
 		struct omap_video_timings *timings)
 {
+	struct dpi_data *dpi = dpi_get_data_from_dssdev(dssdev);
+
 	DSSDBG("dpi_set_timings\n");
 
-	mutex_lock(&dpi.lock);
+	mutex_lock(&dpi->lock);
 
-	dpi.timings = *timings;
+	dpi->timings = *timings;
 
-	mutex_unlock(&dpi.lock);
+	mutex_unlock(&dpi->lock);
 }
 
 static void dpi_get_timings(struct omap_dss_device *dssdev,
 		struct omap_video_timings *timings)
 {
-	mutex_lock(&dpi.lock);
+	struct dpi_data *dpi = dpi_get_data_from_dssdev(dssdev);
+
+	mutex_lock(&dpi->lock);
 
-	*timings = dpi.timings;
+	*timings = dpi->timings;
 
-	mutex_unlock(&dpi.lock);
+	mutex_unlock(&dpi->lock);
 }
 
 static int dpi_check_timings(struct omap_dss_device *dssdev,
 			struct omap_video_timings *timings)
 {
-	struct omap_overlay_manager *mgr = dpi.output.manager;
+	struct dpi_data *dpi = dpi_get_data_from_dssdev(dssdev);
+	struct omap_overlay_manager *mgr = dpi->output.manager;
 	int lck_div, pck_div;
 	unsigned long fck;
 	unsigned long pck;
@@ -485,8 +536,8 @@ static int dpi_check_timings(struct omap_dss_device *dssdev,
 	if (timings->pixelclock = 0)
 		return -EINVAL;
 
-	if (dpi.dsidev) {
-		ok = dpi_dsi_clk_calc(timings->pixelclock, &ctx);
+	if (dpi->dsidev) {
+		ok = dpi_dsi_clk_calc(dpi, timings->pixelclock, &ctx);
 		if (!ok)
 			return -EINVAL;
 
@@ -511,11 +562,13 @@ static int dpi_check_timings(struct omap_dss_device *dssdev,
 
 static void dpi_set_data_lines(struct omap_dss_device *dssdev, int data_lines)
 {
-	mutex_lock(&dpi.lock);
+	struct dpi_data *dpi = dpi_get_data_from_dssdev(dssdev);
 
-	dpi.data_lines = data_lines;
+	mutex_lock(&dpi->lock);
 
-	mutex_unlock(&dpi.lock);
+	dpi->data_lines = data_lines;
+
+	mutex_unlock(&dpi->lock);
 }
 
 static int dpi_verify_dsi_pll(struct platform_device *dsidev)
@@ -540,36 +593,36 @@ static int dpi_verify_dsi_pll(struct platform_device *dsidev)
 	return 0;
 }
 
-static int dpi_init_regulator(void)
+static int dpi_init_regulator(struct dpi_data *dpi)
 {
 	struct regulator *vdds_dsi;
 
 	if (!dss_has_feature(FEAT_DPI_USES_VDDS_DSI))
 		return 0;
 
-	if (dpi.vdds_dsi_reg)
+	if (dpi->vdds_dsi_reg)
 		return 0;
 
-	vdds_dsi = devm_regulator_get(&dpi.pdev->dev, "vdds_dsi");
+	vdds_dsi = devm_regulator_get(&dpi->pdev->dev, "vdds_dsi");
 	if (IS_ERR(vdds_dsi)) {
 		if (PTR_ERR(vdds_dsi) != -EPROBE_DEFER)
 			DSSERR("can't get VDDS_DSI regulator\n");
 		return PTR_ERR(vdds_dsi);
 	}
 
-	dpi.vdds_dsi_reg = vdds_dsi;
+	dpi->vdds_dsi_reg = vdds_dsi;
 
 	return 0;
 }
 
-static void dpi_init_pll(void)
+static void dpi_init_pll(struct dpi_data *dpi)
 {
 	struct platform_device *dsidev;
 
-	if (dpi.dsidev)
+	if (dpi->dsidev)
 		return;
 
-	dsidev = dpi_get_dsidev(dpi.output.dispc_channel);
+	dsidev = dpi_get_dsidev(dpi->output.dispc_channel);
 	if (!dsidev)
 		return;
 
@@ -578,7 +631,7 @@ static void dpi_init_pll(void)
 		return;
 	}
 
-	dpi.dsidev = dsidev;
+	dpi->dsidev = dsidev;
 }
 
 /*
@@ -614,14 +667,15 @@ static enum omap_channel dpi_get_channel(void)
 static int dpi_connect(struct omap_dss_device *dssdev,
 		struct omap_dss_device *dst)
 {
+	struct dpi_data *dpi = dpi_get_data_from_dssdev(dssdev);
 	struct omap_overlay_manager *mgr;
 	int r;
 
-	r = dpi_init_regulator();
+	r = dpi_init_regulator(dpi);
 	if (r)
 		return r;
 
-	dpi_init_pll();
+	dpi_init_pll(dpi);
 
 	mgr = omap_dss_get_overlay_manager(dssdev->dispc_channel);
 	if (!mgr)
@@ -672,7 +726,8 @@ static const struct omapdss_dpi_ops dpi_ops = {
 
 static void dpi_init_output(struct platform_device *pdev)
 {
-	struct omap_dss_device *out = &dpi.output;
+	struct dpi_data *dpi = dpi_get_data_from_pdev(pdev);
+	struct omap_dss_device *out = &dpi->output;
 
 	out->dev = &pdev->dev;
 	out->id = OMAP_DSS_OUTPUT_DPI;
@@ -685,18 +740,72 @@ static void dpi_init_output(struct platform_device *pdev)
 	omapdss_register_output(out);
 }
 
+static void dpi_init_output_port(struct platform_device *pdev,
+		struct device_node *port)
+{
+	struct dpi_data *dpi = port->data;
+	struct omap_dss_device *out = &dpi->output;
+	int r;
+	u32 reg;
+
+	r = of_property_read_u32(port, "reg", &reg);
+	if (r)
+		reg = 0;
+
+	switch (reg) {
+	case 2:
+		out->name = "dpi.2";
+		break;
+	case 1:
+		out->name = "dpi.1";
+		break;
+	case 0:
+	default:
+		out->name = "dpi.0";
+		break;
+	}
+
+	out->dev = &pdev->dev;
+	out->id = OMAP_DSS_OUTPUT_DPI;
+	out->output_type = OMAP_DISPLAY_TYPE_DPI;
+	out->dispc_channel = dpi_get_channel();
+	out->ops.dpi = &dpi_ops;
+	out->reg = reg;
+	out->owner = THIS_MODULE;
+
+	omapdss_register_output(out);
+}
+
 static void __exit dpi_uninit_output(struct platform_device *pdev)
 {
-	struct omap_dss_device *out = &dpi.output;
+	struct dpi_data *dpi = dpi_get_data_from_pdev(pdev);
+	struct omap_dss_device *out = &dpi->output;
+
+	omapdss_unregister_output(out);
+}
+
+static void dpi_uninit_output_port(struct platform_device *pdev,
+		struct device_node *port)
+{
+	struct dpi_data *dpi = port->data;
+	struct omap_dss_device *out = &dpi->output;
 
 	omapdss_unregister_output(out);
 }
 
 static int omap_dpi_probe(struct platform_device *pdev)
 {
-	dpi.pdev = pdev;
+	struct dpi_data *dpi;
+
+	dpi = devm_kzalloc(&pdev->dev, sizeof(*dpi), GFP_KERNEL);
+	if (!dpi)
+		return -ENOMEM;
+
+	dpi->pdev = pdev;
+
+	dev_set_drvdata(&pdev->dev, dpi);
 
-	mutex_init(&dpi.lock);
+	mutex_init(&dpi->lock);
 
 	dpi_init_output(pdev);
 
@@ -731,10 +840,15 @@ void __exit dpi_uninit_platform_driver(void)
 
 int __init dpi_init_port(struct platform_device *pdev, struct device_node *port)
 {
+	struct dpi_data *dpi;
 	struct device_node *ep;
 	u32 datalines;
 	int r;
 
+	dpi = devm_kzalloc(&pdev->dev, sizeof(*dpi), GFP_KERNEL);
+	if (!dpi)
+		return -ENOMEM;
+
 	ep = omapdss_of_get_next_endpoint(port, NULL);
 	if (!ep)
 		return 0;
@@ -745,17 +859,19 @@ int __init dpi_init_port(struct platform_device *pdev, struct device_node *port)
 		goto err_datalines;
 	}
 
-	dpi.data_lines = datalines;
-
 	of_node_put(ep);
 
-	dpi.pdev = pdev;
+	dpi->data_lines = datalines;
 
-	mutex_init(&dpi.lock);
+	port->data = dpi;
 
-	dpi_init_output(pdev);
+	dpi->pdev = pdev;
 
-	dpi.port_initialized = true;
+	mutex_init(&dpi->lock);
+
+	dpi_init_output_port(pdev, port);
+
+	dpi->port_initialized = true;
 
 	return 0;
 
@@ -767,8 +883,10 @@ err_datalines:
 
 void dpi_uninit_port(struct platform_device *pdev, struct device_node *port)
 {
-	if (!dpi.port_initialized)
+	struct dpi_data *dpi = port->data;
+
+	if (!dpi->port_initialized)
 		return;
 
-	dpi_uninit_output(dpi.pdev);
+	dpi_uninit_output_port(pdev, port);
 }
-- 
1.8.3.2

[RFC 5/6] omapdss: DPI: make dpi_get_channel take DPI reg-id

[Archit Taneja]

To support multiple DPI instances, dpi_get_channel needs to take the DPI
instance's reg-id to get the corresponding channel. Make it take this
argument.

We just pass 0 in the non-DT path, since we don't support multiple instances
in the non-DT case.

Signed-off-by: Archit Taneja <archit@ti.com>
---
 drivers/video/fbdev/omap2/dss/dpi.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/video/fbdev/omap2/dss/dpi.c b/drivers/video/fbdev/omap2/dss/dpi.c
index b891e17..faf266e 100644
--- a/drivers/video/fbdev/omap2/dss/dpi.c
+++ b/drivers/video/fbdev/omap2/dss/dpi.c
@@ -640,7 +640,7 @@ static void dpi_init_pll(struct dpi_data *dpi)
  * the channel in some more dynamic manner, or get the channel as a user
  * parameter.
  */
-static enum omap_channel dpi_get_channel(void)
+static enum omap_channel dpi_get_channel(int reg)
 {
 	switch (omapdss_get_version()) {
 	case OMAPDSS_VER_OMAP24xx:
@@ -733,7 +733,7 @@ static void dpi_init_output(struct platform_device *pdev)
 	out->id = OMAP_DSS_OUTPUT_DPI;
 	out->output_type = OMAP_DISPLAY_TYPE_DPI;
 	out->name = "dpi.0";
-	out->dispc_channel = dpi_get_channel();
+	out->dispc_channel = dpi_get_channel(0);
 	out->ops.dpi = &dpi_ops;
 	out->owner = THIS_MODULE;
 
@@ -768,7 +768,7 @@ static void dpi_init_output_port(struct platform_device *pdev,
 	out->dev = &pdev->dev;
 	out->id = OMAP_DSS_OUTPUT_DPI;
 	out->output_type = OMAP_DISPLAY_TYPE_DPI;
-	out->dispc_channel = dpi_get_channel();
+	out->dispc_channel = dpi_get_channel(reg);
 	out->ops.dpi = &dpi_ops;
 	out->reg = reg;
 	out->owner = THIS_MODULE;
-- 
1.8.3.2

[RFC 6/6] omapdss: DSS: add reg-id param to dpi_select_source

[Archit Taneja]

Add an argument which describes which DPI instance we are referring to when
selecting it's overlay manager. This will come into use when a DSS version
supports multiple DPI instances.

Signed-off-by: Archit Taneja <archit@ti.com>
---
 drivers/video/fbdev/omap2/dss/dpi.c |  2 +-
 drivers/video/fbdev/omap2/dss/dss.c | 12 ++++++------
 drivers/video/fbdev/omap2/dss/dss.h |  2 +-
 3 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/video/fbdev/omap2/dss/dpi.c b/drivers/video/fbdev/omap2/dss/dpi.c
index faf266e..def8e68 100644
--- a/drivers/video/fbdev/omap2/dss/dpi.c
+++ b/drivers/video/fbdev/omap2/dss/dpi.c
@@ -420,7 +420,7 @@ static int dpi_display_enable(struct omap_dss_device *dssdev)
 	if (r)
 		goto err_get_dispc;
 
-	r = dss_dpi_select_source(out->manager->id);
+	r = dss_dpi_select_source(out->reg, out->manager->id);
 	if (r)
 		goto err_src_sel;
 
diff --git a/drivers/video/fbdev/omap2/dss/dss.c b/drivers/video/fbdev/omap2/dss/dss.c
index 4087f3b..ffa6d84 100644
--- a/drivers/video/fbdev/omap2/dss/dss.c
+++ b/drivers/video/fbdev/omap2/dss/dss.c
@@ -74,7 +74,7 @@ struct dss_features {
 	u8 fck_div_max;
 	u8 dss_fck_multiplier;
 	const char *parent_clk_name;
-	int (*dpi_select_source)(enum omap_channel channel);
+	int (*dpi_select_source)(int id, enum omap_channel channel);
 	int (*init_ports)(struct platform_device *pdev);
 	void (*uninit_ports)(struct platform_device *pdev);
 };
@@ -570,7 +570,7 @@ enum dss_hdmi_venc_clk_source_select dss_get_hdmi_venc_clk_source(void)
 	return REG_GET(DSS_CONTROL, 15, 15);
 }
 
-static int dss_dpi_select_source_omap2_omap3(enum omap_channel channel)
+static int dss_dpi_select_source_omap2_omap3(int id, enum omap_channel channel)
 {
 	if (channel != OMAP_DSS_CHANNEL_LCD)
 		return -EINVAL;
@@ -578,7 +578,7 @@ static int dss_dpi_select_source_omap2_omap3(enum omap_channel channel)
 	return 0;
 }
 
-static int dss_dpi_select_source_omap4(enum omap_channel channel)
+static int dss_dpi_select_source_omap4(int id, enum omap_channel channel)
 {
 	int val;
 
@@ -598,7 +598,7 @@ static int dss_dpi_select_source_omap4(enum omap_channel channel)
 	return 0;
 }
 
-static int dss_dpi_select_source_omap5(enum omap_channel channel)
+static int dss_dpi_select_source_omap5(int id, enum omap_channel channel)
 {
 	int val;
 
@@ -624,9 +624,9 @@ static int dss_dpi_select_source_omap5(enum omap_channel channel)
 	return 0;
 }
 
-int dss_dpi_select_source(enum omap_channel channel)
+int dss_dpi_select_source(int id, enum omap_channel channel)
 {
-	return dss.feat->dpi_select_source(channel);
+	return dss.feat->dpi_select_source(id, channel);
 }
 
 static int dss_get_clocks(void)
diff --git a/drivers/video/fbdev/omap2/dss/dss.h b/drivers/video/fbdev/omap2/dss/dss.h
index 6f68f72..f3ddcc9 100644
--- a/drivers/video/fbdev/omap2/dss/dss.h
+++ b/drivers/video/fbdev/omap2/dss/dss.h
@@ -209,7 +209,7 @@ int dss_init_platform_driver(void) __init;
 void dss_uninit_platform_driver(void);
 
 unsigned long dss_get_dispc_clk_rate(void);
-int dss_dpi_select_source(enum omap_channel channel);
+int dss_dpi_select_source(int id, enum omap_channel channel);
 void dss_select_hdmi_venc_clk_source(enum dss_hdmi_venc_clk_source_select);
 enum dss_hdmi_venc_clk_source_select dss_get_hdmi_venc_clk_source(void);
 const char *dss_get_generic_clk_source_name(enum omap_dss_clk_source clk_src);
-- 
1.8.3.2

Re: [RFC 1/6] omapdss: remove check for simpler port/endpoint binding

[Tomi Valkeinen]

[-- Attachment #1: Type: text/plain, Size: 1064 bytes --]

On 08/05/14 12:15, Archit Taneja wrote:
> The support for simpler port/endpoint binding was removed in the merged version
> of omapdss DT. But dss_init_ports still tries to get to an endpoint even if no
> port exists. Remove this as this doesn't work.
> 
> Signed-off-by: Archit Taneja <archit@ti.com>
> ---
>  drivers/video/fbdev/omap2/dss/dss.c | 6 +-----
>  1 file changed, 1 insertion(+), 5 deletions(-)
> 
> diff --git a/drivers/video/fbdev/omap2/dss/dss.c b/drivers/video/fbdev/omap2/dss/dss.c
> index d55266c..31ef262 100644
> --- a/drivers/video/fbdev/omap2/dss/dss.c
> +++ b/drivers/video/fbdev/omap2/dss/dss.c
> @@ -784,12 +784,8 @@ static int __init dss_init_ports(struct platform_device *pdev)
>  		return 0;
>  
>  	port = omapdss_of_get_next_port(parent, NULL);
> -	if (!port) {
> -#ifdef CONFIG_OMAP2_DSS_DPI
> -		dpi_init_port(pdev, parent);
> -#endif
> +	if (!port)
>  		return 0;
> -	}
>  
>  	do {
>  		u32 reg;
> 

I'll try to find time to review the rest, but I'll queue this one
already for 3.16.

 Tomi



[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]