From mboxrd@z Thu Jan 1 00:00:00 1970 From: Michael Welling Date: Thu, 19 Jun 2014 01:52:12 +0000 Subject: [PATCH] drivers:video:fbdev atmel_lcdfb.c power GPIO registration bug Message-Id: <1403142732-31706-1-git-send-email-mwelling@ieee.org> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: Jean-Christophe Plagniol-Villard , Tomi Valkeinen , Nicolas Ferre , linux-fbdev@vger.kernel.org, linux-kernel@vger.kernel.org Cc: Michael Welling A list that was intended for storing power control GPIOs was never initialized correctly or filled. Without these lines of added code the kernel hangs when trying to access an uninitialized list when a power control GPIO is registered with the device tree. Signed-off-by: Michael Welling --- drivers/video/fbdev/atmel_lcdfb.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/video/fbdev/atmel_lcdfb.c b/drivers/video/fbdev/atmel_lcdfb.c index e683b6e..d36e830 100644 --- a/drivers/video/fbdev/atmel_lcdfb.c +++ b/drivers/video/fbdev/atmel_lcdfb.c @@ -1057,6 +1057,7 @@ static int atmel_lcdfb_of_init(struct atmel_lcdfb_info *sinfo) goto put_display_node; } + INIT_LIST_HEAD(&pdata->pwr_gpios); ret = -ENOMEM; for (i = 0; i < of_gpio_named_count(display_np, "atmel,power-control-gpio"); i++) { gpio = of_get_named_gpio_flags(display_np, "atmel,power-control-gpio", @@ -1082,6 +1083,7 @@ static int atmel_lcdfb_of_init(struct atmel_lcdfb_info *sinfo) dev_err(dev, "set direction output gpio %d failed\n", gpio); goto put_display_node; } + list_add(&og->list, &pdata->pwr_gpios); } if (is_gpio_power) -- 1.7.9.5