From mboxrd@z Thu Jan 1 00:00:00 1970 From: Felipe Balbi Date: Tue, 14 Oct 2014 18:28:55 +0000 Subject: [PATCH 3/3] arm: boot: dts: am437x-sk: fix lcd enable pin mux data Message-Id: <1413311335-25083-3-git-send-email-balbi@ti.com> List-Id: References: <1413311335-25083-1-git-send-email-balbi@ti.com> In-Reply-To: <1413311335-25083-1-git-send-email-balbi@ti.com> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-arm-kernel@lists.infradead.org Caused by a copy & paste error. Note that even with this bug AM437x SK display still works because GPIO mux mode is always enabled. It's still wrong to mux somebody else's pin. Luckily ball D25 (offset 0x238 - gpio5_8) on AM437x isn't used for anything. Signed-off-by: Felipe Balbi --- arch/arm/boot/dts/am437x-sk-evm.dts | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts index 859ff3d..681be00 100644 --- a/arch/arm/boot/dts/am437x-sk-evm.dts +++ b/arch/arm/boot/dts/am437x-sk-evm.dts @@ -320,8 +320,7 @@ lcd_pins: lcd_pins { pinctrl-single,pins = < - /* GPIO 5_8 to select LCD / HDMI */ - 0x238 (PIN_OUTPUT_PULLUP | MUX_MODE7) + 0x1c (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpcm_ad7.gpio1_7 */ >; }; }; -- 2.1.0.GIT