From: "Lad, Prabhakar" <prabhakar.csengg@gmail.com>
To: LFBDEV <linux-fbdev@vger.kernel.org>,
Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>,
Tomi Valkeinen <tomi.valkeinen@ti.com>,
Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: LKML <linux-kernel@vger.kernel.org>,
Prabhakar Lad <prabhakar.csengg@gmail.com>
Subject: [PATCH v2] fbdev: ssd1307fb: return proper error code if write command fails
Date: Thu, 15 Jan 2015 19:05:37 +0000 [thread overview]
Message-ID: <1421348737-4606-1-git-send-email-prabhakar.csengg@gmail.com> (raw)
From: Prabhakar Lad <prabhakar.csengg@gmail.com>
this patch fixes ssd1307fb_ssd1306_init() function to return
proper error codes in case of failures.
Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
---
Changes for v2:
a: Added new line as per Maxime's suggestion.
drivers/video/fbdev/ssd1307fb.c | 67 ++++++++++++++++++++++++++++++++---------
1 file changed, 53 insertions(+), 14 deletions(-)
diff --git a/drivers/video/fbdev/ssd1307fb.c b/drivers/video/fbdev/ssd1307fb.c
index f4daa59..0ea6345 100644
--- a/drivers/video/fbdev/ssd1307fb.c
+++ b/drivers/video/fbdev/ssd1307fb.c
@@ -320,7 +320,10 @@ static int ssd1307fb_ssd1306_init(struct ssd1307fb_par *par)
/* Set initial contrast */
ret = ssd1307fb_write_cmd(par->client, SSD1307FB_CONTRAST);
- ret = ret & ssd1307fb_write_cmd(par->client, 0x7f);
+ if (ret < 0)
+ return ret;
+
+ ret = ssd1307fb_write_cmd(par->client, 0x7f);
if (ret < 0)
return ret;
@@ -336,63 +339,99 @@ static int ssd1307fb_ssd1306_init(struct ssd1307fb_par *par)
/* Set multiplex ratio value */
ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_MULTIPLEX_RATIO);
- ret = ret & ssd1307fb_write_cmd(par->client, par->height - 1);
+ if (ret < 0)
+ return ret;
+
+ ret = ssd1307fb_write_cmd(par->client, par->height - 1);
if (ret < 0)
return ret;
/* set display offset value */
ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_DISPLAY_OFFSET);
+ if (ret < 0)
+ return ret;
+
ret = ssd1307fb_write_cmd(par->client, 0x20);
if (ret < 0)
return ret;
/* Set clock frequency */
ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_CLOCK_FREQ);
- ret = ret & ssd1307fb_write_cmd(par->client, 0xf0);
+ if (ret < 0)
+ return ret;
+
+ ret = ssd1307fb_write_cmd(par->client, 0xf0);
if (ret < 0)
return ret;
/* Set precharge period in number of ticks from the internal clock */
ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_PRECHARGE_PERIOD);
- ret = ret & ssd1307fb_write_cmd(par->client, 0x22);
+ if (ret < 0)
+ return ret;
+
+ ret = ssd1307fb_write_cmd(par->client, 0x22);
if (ret < 0)
return ret;
/* Set COM pins configuration */
ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_COM_PINS_CONFIG);
- ret = ret & ssd1307fb_write_cmd(par->client, 0x22);
+ if (ret < 0)
+ return ret;
+
+ ret = ssd1307fb_write_cmd(par->client, 0x22);
if (ret < 0)
return ret;
/* Set VCOMH */
ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_VCOMH);
- ret = ret & ssd1307fb_write_cmd(par->client, 0x49);
+ if (ret < 0)
+ return ret;
+
+ ret = ssd1307fb_write_cmd(par->client, 0x49);
if (ret < 0)
return ret;
/* Turn on the DC-DC Charge Pump */
ret = ssd1307fb_write_cmd(par->client, SSD1307FB_CHARGE_PUMP);
- ret = ret & ssd1307fb_write_cmd(par->client, 0x14);
+ if (ret < 0)
+ return ret;
+
+ ret = ssd1307fb_write_cmd(par->client, 0x14);
if (ret < 0)
return ret;
/* Switch to horizontal addressing mode */
ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_ADDRESS_MODE);
- ret = ret & ssd1307fb_write_cmd(par->client,
- SSD1307FB_SET_ADDRESS_MODE_HORIZONTAL);
+ if (ret < 0)
+ return ret;
+
+ ret = ssd1307fb_write_cmd(par->client,
+ SSD1307FB_SET_ADDRESS_MODE_HORIZONTAL);
if (ret < 0)
return ret;
ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_COL_RANGE);
- ret = ret & ssd1307fb_write_cmd(par->client, 0x0);
- ret = ret & ssd1307fb_write_cmd(par->client, par->width - 1);
+ if (ret < 0)
+ return ret;
+
+ ret = ssd1307fb_write_cmd(par->client, 0x0);
+ if (ret < 0)
+ return ret;
+
+ ret = ssd1307fb_write_cmd(par->client, par->width - 1);
if (ret < 0)
return ret;
ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_PAGE_RANGE);
- ret = ret & ssd1307fb_write_cmd(par->client, 0x0);
- ret = ret & ssd1307fb_write_cmd(par->client,
- par->page_offset + (par->height / 8) - 1);
+ if (ret < 0)
+ return ret;
+
+ ret = ssd1307fb_write_cmd(par->client, 0x0);
+ if (ret < 0)
+ return ret;
+
+ ret = ssd1307fb_write_cmd(par->client,
+ par->page_offset + (par->height / 8) - 1);
if (ret < 0)
return ret;
--
1.9.1
next reply other threads:[~2015-01-15 19:05 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-15 19:05 Lad, Prabhakar [this message]
2015-01-30 7:40 ` [PATCH v2] fbdev: ssd1307fb: return proper error code if write command fails Tomi Valkeinen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1421348737-4606-1-git-send-email-prabhakar.csengg@gmail.com \
--to=prabhakar.csengg@gmail.com \
--cc=linux-fbdev@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=maxime.ripard@free-electrons.com \
--cc=plagnioj@jcrosoft.com \
--cc=tomi.valkeinen@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).