From: Arun Ramamurthy <arun.ramamurthy@broadcom.com>
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCHv3 1/4] phy: phy-core: Make GENERIC_PHY an invisible option
Date: Wed, 22 Apr 2015 23:04:10 +0000 [thread overview]
Message-ID: <1429743853-10254-2-git-send-email-arun.ramamurthy@broadcom.com> (raw)
In-Reply-To: <1429743853-10254-1-git-send-email-arun.ramamurthy@broadcom.com>
Most of the phy providers use "select" to enable GENERIC_PHY. Since select
is only recommended when the config is not visible, GENERIC_PHY is changed
an invisible option. To maintain consistency, all phy providers are changed
to "select" GENERIC_PHY and all non-phy drivers use "depends on" when the
phy framework is explicity required. USB_MUSB_OMAP2PLUS has a cyclic
dependency, so it is left as "select".
Signed-off-by: Arun Ramamurthy <arun.ramamurthy@broadcom.com>
---
drivers/ata/Kconfig | 1 -
drivers/media/platform/exynos4-is/Kconfig | 2 +-
drivers/phy/Kconfig | 4 ++--
drivers/usb/host/Kconfig | 4 ++--
drivers/video/fbdev/exynos/Kconfig | 2 +-
5 files changed, 6 insertions(+), 7 deletions(-)
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 5f60155..6d2e881 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -301,7 +301,6 @@ config SATA_MV
tristate "Marvell SATA support"
depends on PCI || ARCH_DOVE || ARCH_MV78XX0 || \
ARCH_MVEBU || ARCH_ORION5X || COMPILE_TEST
- select GENERIC_PHY
help
This option enables support for the Marvell Serial ATA family.
Currently supports 88SX[56]0[48][01] PCI(-X) chips,
diff --git a/drivers/media/platform/exynos4-is/Kconfig b/drivers/media/platform/exynos4-is/Kconfig
index b7b2e47..b6f3eaa 100644
--- a/drivers/media/platform/exynos4-is/Kconfig
+++ b/drivers/media/platform/exynos4-is/Kconfig
@@ -31,7 +31,7 @@ config VIDEO_S5P_FIMC
config VIDEO_S5P_MIPI_CSIS
tristate "S5P/EXYNOS MIPI-CSI2 receiver (MIPI-CSIS) driver"
depends on REGULATOR
- select GENERIC_PHY
+ depends on GENERIC_PHY
help
This is a V4L2 driver for Samsung S5P and EXYNOS4 SoC MIPI-CSI2
receiver (MIPI-CSIS) devices.
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 2962de2..edecdb1 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -5,7 +5,7 @@
menu "PHY Subsystem"
config GENERIC_PHY
- bool "PHY Core"
+ bool
help
Generic PHY support.
@@ -72,7 +72,7 @@ config PHY_MIPHY365X
config PHY_RCAR_GEN2
tristate "Renesas R-Car generation 2 USB PHY driver"
depends on ARCH_SHMOBILE
- depends on GENERIC_PHY
+ select GENERIC_PHY
help
Support for USB PHY found on Renesas R-Car generation 2 SoCs.
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 5ad60e4..e2197e2 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -182,7 +182,7 @@ config USB_EHCI_HCD_SPEAR
config USB_EHCI_HCD_STI
tristate "Support for ST STiHxxx on-chip EHCI USB controller"
depends on ARCH_STI && OF
- select GENERIC_PHY
+ depends on GENERIC_PHY
select USB_EHCI_HCD_PLATFORM
help
Enable support for the on-chip EHCI controller found on
@@ -409,7 +409,7 @@ config USB_OHCI_HCD_SPEAR
config USB_OHCI_HCD_STI
tristate "Support for ST STiHxxx on-chip OHCI USB controller"
depends on ARCH_STI && OF
- select GENERIC_PHY
+ depends on GENERIC_PHY
select USB_OHCI_HCD_PLATFORM
help
Enable support for the on-chip OHCI controller found on
diff --git a/drivers/video/fbdev/exynos/Kconfig b/drivers/video/fbdev/exynos/Kconfig
index 1f16b46..6c53894 100644
--- a/drivers/video/fbdev/exynos/Kconfig
+++ b/drivers/video/fbdev/exynos/Kconfig
@@ -16,7 +16,7 @@ if EXYNOS_VIDEO
config EXYNOS_MIPI_DSI
bool "EXYNOS MIPI DSI driver support."
- select GENERIC_PHY
+ depends on GENERIC_PHY
help
This enables support for MIPI-DSI device.
--
2.3.4
next prev parent reply other threads:[~2015-04-22 23:04 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-04-22 23:04 [PATCHv3 0/4] add devm_of_phy_get_by_index and update platform drivers Arun Ramamurthy
2015-04-22 23:04 ` Arun Ramamurthy [this message]
2015-05-14 21:57 ` [PATCHv3 1/4] phy: phy-core: Make GENERIC_PHY an invisible option Mauro Carvalho Chehab
2015-05-15 0:52 ` Felipe Balbi
2015-05-25 21:19 ` Arun Ramamurthy
2015-05-26 14:19 ` Felipe Balbi
2015-05-26 18:37 ` Arun Ramamurthy
2015-05-26 18:39 ` Felipe Balbi
2015-05-29 11:46 ` Kishon Vijay Abraham I
2015-05-29 15:04 ` Felipe Balbi
2015-06-01 12:54 ` Kishon Vijay Abraham I
2015-06-01 18:39 ` Felipe Balbi
2015-05-29 12:49 ` Kishon Vijay Abraham I
2015-05-29 12:59 ` Maxime Coquelin
2015-05-29 13:09 ` Tejun Heo
2015-05-29 13:13 ` Sylwester Nawrocki
2015-04-22 23:04 ` [PATCHv3 2/4] phy: core: Add devm_of_phy_get_by_index to phy-core Arun Ramamurthy
2015-05-11 15:21 ` Kishon Vijay Abraham I
2015-04-22 23:04 ` [PATCHv3 3/4] usb: ehci-platform: Use devm_of_phy_get_by_index Arun Ramamurthy
2015-04-22 23:04 ` [PATCHv3 4/4] usb: ohci-platform: " Arun Ramamurthy
2015-04-23 7:42 ` [PATCHv3 0/4] add devm_of_phy_get_by_index and update platform drivers Hans de Goede
2015-04-23 14:31 ` Alan Stern
2015-05-11 13:56 ` Kishon Vijay Abraham I
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1429743853-10254-2-git-send-email-arun.ramamurthy@broadcom.com \
--to=arun.ramamurthy@broadcom.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).