From: "Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>
To: Tomi Valkeinen <tomi.valkeinen@ti.com>,
Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: linux-omap@vger.kernel.org, linux-fbdev@vger.kernel.org,
Linus Walleij <linus.walleij@linaro.org>,
kernel@pengutronix.de
Subject: [PATCH] fbdev: omap2: improve usage of gpiod API
Date: Thu, 28 May 2015 08:05:15 +0000 [thread overview]
Message-ID: <1432800315-25972-1-git-send-email-u.kleine-koenig@pengutronix.de> (raw)
Since 39b2bbe3d715 (gpio: add flags argument to gpiod_get*() functions)
which appeared in v3.17-rc1, the gpiod_get* functions take an additional
parameter that allows to specify direction and initial value for output.
Also make use of gpiod_get*_optional where applicable.
Apart from simplification of the affected drivers this is another step
towards making the flags argument to gpiod_get*() mandatory.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
drivers/video/fbdev/omap2/displays-new/encoder-opa362.c | 12 +++---------
drivers/video/fbdev/omap2/displays-new/panel-dpi.c | 13 +++----------
.../fbdev/omap2/displays-new/panel-lgphilips-lb035q02.c | 7 +++----
.../fbdev/omap2/displays-new/panel-sharp-ls037v7dw01.c | 9 ++-------
4 files changed, 11 insertions(+), 30 deletions(-)
diff --git a/drivers/video/fbdev/omap2/displays-new/encoder-opa362.c b/drivers/video/fbdev/omap2/displays-new/encoder-opa362.c
index 84a6b3367124..a14d993f719d 100644
--- a/drivers/video/fbdev/omap2/displays-new/encoder-opa362.c
+++ b/drivers/video/fbdev/omap2/displays-new/encoder-opa362.c
@@ -201,15 +201,9 @@ static int opa362_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, ddata);
- gpio = devm_gpiod_get(&pdev->dev, "enable");
- if (IS_ERR(gpio)) {
- if (PTR_ERR(gpio) != -ENOENT)
- return PTR_ERR(gpio);
-
- gpio = NULL;
- } else {
- gpiod_direction_output(gpio, 0);
- }
+ gpio = devm_gpiod_get_optional(&pdev->dev, "enable", GPIOD_OUT_LOW);
+ if (IS_ERR(gpio))
+ return PTR_ERR(gpio);
ddata->enable_gpio = gpio;
diff --git a/drivers/video/fbdev/omap2/displays-new/panel-dpi.c b/drivers/video/fbdev/omap2/displays-new/panel-dpi.c
index eb8fd8140ad0..f7be3489f744 100644
--- a/drivers/video/fbdev/omap2/displays-new/panel-dpi.c
+++ b/drivers/video/fbdev/omap2/displays-new/panel-dpi.c
@@ -209,16 +209,9 @@ static int panel_dpi_probe_of(struct platform_device *pdev)
struct videomode vm;
struct gpio_desc *gpio;
- gpio = devm_gpiod_get(&pdev->dev, "enable");
-
- if (IS_ERR(gpio)) {
- if (PTR_ERR(gpio) != -ENOENT)
- return PTR_ERR(gpio);
- else
- gpio = NULL;
- } else {
- gpiod_direction_output(gpio, 0);
- }
+ gpio = devm_gpiod_get_optional(&pdev->dev, "enable", GPIOD_OUT_LOW);
+ if (IS_ERR(gpio))
+ return PTR_ERR(gpio);
ddata->enable_gpio = gpio;
diff --git a/drivers/video/fbdev/omap2/displays-new/panel-lgphilips-lb035q02.c b/drivers/video/fbdev/omap2/displays-new/panel-lgphilips-lb035q02.c
index 9974a37a11af..6a1b6a89a928 100644
--- a/drivers/video/fbdev/omap2/displays-new/panel-lgphilips-lb035q02.c
+++ b/drivers/video/fbdev/omap2/displays-new/panel-lgphilips-lb035q02.c
@@ -285,15 +285,14 @@ static int lb035q02_probe_of(struct spi_device *spi)
struct omap_dss_device *in;
struct gpio_desc *gpio;
- gpio = devm_gpiod_get(&spi->dev, "enable");
+ gpio = devm_gpiod_get(&spi->dev, "enable", GPIOD_OUT_LOW);
if (IS_ERR(gpio)) {
dev_err(&spi->dev, "failed to parse enable gpio\n");
return PTR_ERR(gpio);
- } else {
- gpiod_direction_output(gpio, 0);
- ddata->enable_gpio = gpio;
}
+ ddata->enable_gpio = gpio;
+
ddata->backlight_gpio = -ENOENT;
in = omapdss_of_find_source_for_first_ep(node);
diff --git a/drivers/video/fbdev/omap2/displays-new/panel-sharp-ls037v7dw01.c b/drivers/video/fbdev/omap2/displays-new/panel-sharp-ls037v7dw01.c
index eae263702964..abfd1f6e3327 100644
--- a/drivers/video/fbdev/omap2/displays-new/panel-sharp-ls037v7dw01.c
+++ b/drivers/video/fbdev/omap2/displays-new/panel-sharp-ls037v7dw01.c
@@ -268,17 +268,12 @@ static int sharp_ls_get_gpio_of(struct device *dev, int index, int val,
const char *desc, struct gpio_desc **gpiod)
{
struct gpio_desc *gd;
- int r;
*gpiod = NULL;
- gd = devm_gpiod_get_index(dev, desc, index);
+ gd = devm_gpiod_get_index(dev, desc, index, GPIOD_OUT_LOW);
if (IS_ERR(gd))
- return PTR_ERR(gd) = -ENOENT ? 0 : PTR_ERR(gd);
-
- r = gpiod_direction_output(gd, val);
- if (r)
- return r;
+ return PTR_ERR(gd);
*gpiod = gd;
return 0;
--
2.1.4
next reply other threads:[~2015-05-28 8:05 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-28 8:05 Uwe Kleine-König [this message]
2015-05-29 6:07 ` [PATCH] fbdev: omap2: improve usage of gpiod API Tomi Valkeinen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1432800315-25972-1-git-send-email-u.kleine-koenig@pengutronix.de \
--to=u.kleine-koenig@pengutronix.de \
--cc=kernel@pengutronix.de \
--cc=linus.walleij@linaro.org \
--cc=linux-fbdev@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=plagnioj@jcrosoft.com \
--cc=tomi.valkeinen@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).