* [PATCH v3 01/19] staging: sm750fb: use tabs for indentation
2015-06-24 16:20 [PATCH v3 00/19] staging: sm750fb: checkpatch.pl fixes Juston Li
@ 2015-06-24 16:25 ` Juston Li
2015-06-24 16:25 ` [PATCH v3 02/19] staging: sm750fb: remove spacing after open parenthesis Juston Li
` (17 subsequent siblings)
18 siblings, 0 replies; 31+ messages in thread
From: Juston Li @ 2015-06-24 16:25 UTC (permalink / raw)
To: sudipm.mukherjee, teddy.wang, gregkh, linux-fbdev, devel,
linux-kernel, dan.carpenter
Cc: Juston Li
Replace spaces with tabs for indentation to fix the checkpatch.pl error
ERROR: code indent should use tabs where possible
WARNING: please, no spaces at the start of a line
Signed-off-by: Juston Li <juston.h.li@gmail.com>
---
drivers/staging/sm750fb/ddk750_display.c | 100 ++++----
drivers/staging/sm750fb/ddk750_display.h | 2 +-
drivers/staging/sm750fb/ddk750_dvi.c | 66 +++---
drivers/staging/sm750fb/ddk750_help.h | 4 +-
drivers/staging/sm750fb/ddk750_hwi2c.c | 246 +++++++++----------
drivers/staging/sm750fb/ddk750_mode.c | 142 +++++------
drivers/staging/sm750fb/ddk750_mode.h | 46 ++--
drivers/staging/sm750fb/ddk750_power.c | 254 ++++++++++----------
drivers/staging/sm750fb/ddk750_power.h | 8 +-
drivers/staging/sm750fb/ddk750_reg.h | 18 +-
drivers/staging/sm750fb/ddk750_sii164.c | 394 +++++++++++++++----------------
drivers/staging/sm750fb/ddk750_sii164.h | 28 +--
drivers/staging/sm750fb/sm750.h | 24 +-
drivers/staging/sm750fb/sm750_accel.c | 370 ++++++++++++++---------------
drivers/staging/sm750fb/sm750_accel.h | 4 +-
drivers/staging/sm750fb/sm750_help.h | 26 +-
drivers/staging/sm750fb/sm750_hw.c | 70 +++---
drivers/staging/sm750fb/sm750_hw.h | 28 +--
18 files changed, 915 insertions(+), 915 deletions(-)
diff --git a/drivers/staging/sm750fb/ddk750_display.c b/drivers/staging/sm750fb/ddk750_display.c
index a3e6720..1c4049f 100644
--- a/drivers/staging/sm750fb/ddk750_display.c
+++ b/drivers/staging/sm750fb/ddk750_display.c
@@ -24,7 +24,7 @@ static void setDisplayControl(int ctrl, int dispState)
/* Timing should be enabled first before enabling the plane
* because changing at the same time does not guarantee that
* the plane will also enabled or disabled.
- */
+ */
ulDisplayCtrlReg = FIELD_SET(ulDisplayCtrlReg,
PANEL_DISPLAY_CTRL, TIMING, ENABLE);
POKE32(PANEL_DISPLAY_CTRL, ulDisplayCtrlReg);
@@ -135,8 +135,8 @@ static void waitNextVerticalSync(int ctrl, int delay)
if(!ctrl){
/* primary controller */
- /* Do not wait when the Primary PLL is off or display control is already off.
- This will prevent the software to wait forever. */
+ /* Do not wait when the Primary PLL is off or display control is already off.
+ This will prevent the software to wait forever. */
if ((FIELD_GET(PEEK32(PANEL_PLL_CTRL), PANEL_PLL_CTRL, POWER) =
PANEL_PLL_CTRL_POWER_OFF) ||
(FIELD_GET(PEEK32(PANEL_DISPLAY_CTRL), PANEL_DISPLAY_CTRL, TIMING) =
@@ -145,26 +145,26 @@ static void waitNextVerticalSync(int ctrl, int delay)
return;
}
- while (delay-- > 0)
- {
- /* Wait for end of vsync. */
- do
- {
- status = FIELD_GET(PEEK32(SYSTEM_CTRL),
- SYSTEM_CTRL,
- PANEL_VSYNC);
- }
- while (status = SYSTEM_CTRL_PANEL_VSYNC_ACTIVE);
-
- /* Wait for start of vsync. */
- do
- {
- status = FIELD_GET(PEEK32(SYSTEM_CTRL),
- SYSTEM_CTRL,
- PANEL_VSYNC);
- }
- while (status = SYSTEM_CTRL_PANEL_VSYNC_INACTIVE);
- }
+ while (delay-- > 0)
+ {
+ /* Wait for end of vsync. */
+ do
+ {
+ status = FIELD_GET(PEEK32(SYSTEM_CTRL),
+ SYSTEM_CTRL,
+ PANEL_VSYNC);
+ }
+ while (status = SYSTEM_CTRL_PANEL_VSYNC_ACTIVE);
+
+ /* Wait for start of vsync. */
+ do
+ {
+ status = FIELD_GET(PEEK32(SYSTEM_CTRL),
+ SYSTEM_CTRL,
+ PANEL_VSYNC);
+ }
+ while (status = SYSTEM_CTRL_PANEL_VSYNC_INACTIVE);
+ }
}else{
@@ -275,33 +275,33 @@ void ddk750_setLogicalDispOut(disp_output_t output)
int ddk750_initDVIDisp(void)
{
- /* Initialize DVI. If the dviInit fail and the VendorID or the DeviceID are
- not zeroed, then set the failure flag. If it is zeroe, it might mean
- that the system is in Dual CRT Monitor configuration. */
-
- /* De-skew enabled with default 111b value.
- This will fix some artifacts problem in some mode on board 2.2.
- Somehow this fix does not affect board 2.1.
- */
- if ((dviInit(1, /* Select Rising Edge */
- 1, /* Select 24-bit bus */
- 0, /* Select Single Edge clock */
- 1, /* Enable HSync as is */
- 1, /* Enable VSync as is */
- 1, /* Enable De-skew */
- 7, /* Set the de-skew setting to maximum setup */
- 1, /* Enable continuous Sync */
- 1, /* Enable PLL Filter */
- 4 /* Use the recommended value for PLL Filter value */
- ) != 0) && (dviGetVendorID() != 0x0000) && (dviGetDeviceID() != 0x0000))
- {
- return (-1);
- }
-
- /* TODO: Initialize other display component */
-
- /* Success */
- return 0;
+ /* Initialize DVI. If the dviInit fail and the VendorID or the DeviceID are
+ not zeroed, then set the failure flag. If it is zeroe, it might mean
+ that the system is in Dual CRT Monitor configuration. */
+
+ /* De-skew enabled with default 111b value.
+ This will fix some artifacts problem in some mode on board 2.2.
+ Somehow this fix does not affect board 2.1.
+ */
+ if ((dviInit(1, /* Select Rising Edge */
+ 1, /* Select 24-bit bus */
+ 0, /* Select Single Edge clock */
+ 1, /* Enable HSync as is */
+ 1, /* Enable VSync as is */
+ 1, /* Enable De-skew */
+ 7, /* Set the de-skew setting to maximum setup */
+ 1, /* Enable continuous Sync */
+ 1, /* Enable PLL Filter */
+ 4 /* Use the recommended value for PLL Filter value */
+ ) != 0) && (dviGetVendorID() != 0x0000) && (dviGetDeviceID() != 0x0000))
+ {
+ return (-1);
+ }
+
+ /* TODO: Initialize other display component */
+
+ /* Success */
+ return 0;
}
diff --git a/drivers/staging/sm750fb/ddk750_display.h b/drivers/staging/sm750fb/ddk750_display.h
index ae0f84c..018a661 100644
--- a/drivers/staging/sm750fb/ddk750_display.h
+++ b/drivers/staging/sm750fb/ddk750_display.h
@@ -8,7 +8,7 @@
#define PNL_2_OFFSET 0
#define PNL_2_MASK (3 << PNL_2_OFFSET)
#define PNL_2_USAGE (PNL_2_MASK << 16)
-#define PNL_2_PRI ((0 << PNL_2_OFFSET)|PNL_2_USAGE)
+#define PNL_2_PRI ((0 << PNL_2_OFFSET)|PNL_2_USAGE)
#define PNL_2_SEC ((2 << PNL_2_OFFSET)|PNL_2_USAGE)
diff --git a/drivers/staging/sm750fb/ddk750_dvi.c b/drivers/staging/sm750fb/ddk750_dvi.c
index b2bf7e6..35866fa 100644
--- a/drivers/staging/sm750fb/ddk750_dvi.c
+++ b/drivers/staging/sm750fb/ddk750_dvi.c
@@ -12,35 +12,35 @@
static dvi_ctrl_device_t g_dcftSupportedDviController[] {
#ifdef DVI_CTRL_SII164
- {
- .pfnInit = sii164InitChip,
- .pfnGetVendorId = sii164GetVendorID,
- .pfnGetDeviceId = sii164GetDeviceID,
+ {
+ .pfnInit = sii164InitChip,
+ .pfnGetVendorId = sii164GetVendorID,
+ .pfnGetDeviceId = sii164GetDeviceID,
#ifdef SII164_FULL_FUNCTIONS
- .pfnResetChip = sii164ResetChip,
- .pfnGetChipString = sii164GetChipString,
- .pfnSetPower = sii164SetPower,
- .pfnEnableHotPlugDetection = sii164EnableHotPlugDetection,
- .pfnIsConnected = sii164IsConnected,
- .pfnCheckInterrupt = sii164CheckInterrupt,
- .pfnClearInterrupt = sii164ClearInterrupt,
+ .pfnResetChip = sii164ResetChip,
+ .pfnGetChipString = sii164GetChipString,
+ .pfnSetPower = sii164SetPower,
+ .pfnEnableHotPlugDetection = sii164EnableHotPlugDetection,
+ .pfnIsConnected = sii164IsConnected,
+ .pfnCheckInterrupt = sii164CheckInterrupt,
+ .pfnClearInterrupt = sii164ClearInterrupt,
#endif
- },
+ },
#endif
};
int dviInit(
- unsigned char edgeSelect,
- unsigned char busSelect,
- unsigned char dualEdgeClkSelect,
- unsigned char hsyncEnable,
- unsigned char vsyncEnable,
- unsigned char deskewEnable,
- unsigned char deskewSetting,
- unsigned char continuousSyncEnable,
- unsigned char pllFilterEnable,
- unsigned char pllFilterValue
+ unsigned char edgeSelect,
+ unsigned char busSelect,
+ unsigned char dualEdgeClkSelect,
+ unsigned char hsyncEnable,
+ unsigned char vsyncEnable,
+ unsigned char deskewEnable,
+ unsigned char deskewSetting,
+ unsigned char continuousSyncEnable,
+ unsigned char pllFilterEnable,
+ unsigned char pllFilterValue
)
{
dvi_ctrl_device_t *pCurrentDviCtrl;
@@ -48,8 +48,8 @@ int dviInit(
if(pCurrentDviCtrl->pfnInit != NULL)
{
return pCurrentDviCtrl->pfnInit(edgeSelect, busSelect, dualEdgeClkSelect, hsyncEnable,
- vsyncEnable, deskewEnable, deskewSetting, continuousSyncEnable,
- pllFilterEnable, pllFilterValue);
+ vsyncEnable, deskewEnable, deskewSetting, continuousSyncEnable,
+ pllFilterEnable, pllFilterValue);
}
return -1; /* error */
}
@@ -64,13 +64,13 @@ int dviInit(
*/
unsigned short dviGetVendorID(void)
{
- dvi_ctrl_device_t *pCurrentDviCtrl;
+ dvi_ctrl_device_t *pCurrentDviCtrl;
- pCurrentDviCtrl = g_dcftSupportedDviController;
- if (pCurrentDviCtrl != (dvi_ctrl_device_t *)0)
- return pCurrentDviCtrl->pfnGetVendorId();
+ pCurrentDviCtrl = g_dcftSupportedDviController;
+ if (pCurrentDviCtrl != (dvi_ctrl_device_t *)0)
+ return pCurrentDviCtrl->pfnGetVendorId();
- return 0x0000;
+ return 0x0000;
}
@@ -83,13 +83,13 @@ unsigned short dviGetVendorID(void)
*/
unsigned short dviGetDeviceID(void)
{
- dvi_ctrl_device_t *pCurrentDviCtrl;
+ dvi_ctrl_device_t *pCurrentDviCtrl;
pCurrentDviCtrl = g_dcftSupportedDviController;
- if (pCurrentDviCtrl != (dvi_ctrl_device_t *)0)
- return pCurrentDviCtrl->pfnGetDeviceId();
+ if (pCurrentDviCtrl != (dvi_ctrl_device_t *)0)
+ return pCurrentDviCtrl->pfnGetDeviceId();
- return 0x0000;
+ return 0x0000;
}
#endif
diff --git a/drivers/staging/sm750fb/ddk750_help.h b/drivers/staging/sm750fb/ddk750_help.h
index 4285b05..3b06aed 100644
--- a/drivers/staging/sm750fb/ddk750_help.h
+++ b/drivers/staging/sm750fb/ddk750_help.h
@@ -12,8 +12,8 @@
#if 0
/* if 718 big endian turned on,be aware that don't use this driver for general use,only for ppc big-endian */
#warning "big endian on target cpu and enable nature big endian support of 718 capability !"
-#define PEEK32(addr) __raw_readl(mmio750 + addr)
-#define POKE32(addr, data) __raw_writel(data, mmio750 + addr)
+#define PEEK32(addr) __raw_readl(mmio750 + addr)
+#define POKE32(addr, data) __raw_writel(data, mmio750 + addr)
#else /* software control endianness */
#define PEEK32(addr) readl(addr + mmio750)
#define POKE32(addr, data) writel(data, addr + mmio750)
diff --git a/drivers/staging/sm750fb/ddk750_hwi2c.c b/drivers/staging/sm750fb/ddk750_hwi2c.c
index 7826376..7f3b1f9 100644
--- a/drivers/staging/sm750fb/ddk750_hwi2c.c
+++ b/drivers/staging/sm750fb/ddk750_hwi2c.c
@@ -10,70 +10,70 @@
int hwI2CInit(
- unsigned char busSpeedMode
+unsigned char busSpeedMode
)
{
- unsigned int value;
+ unsigned int value;
- /* Enable GPIO 30 & 31 as IIC clock & data */
+ /* Enable GPIO 30 & 31 as IIC clock & data */
value = PEEK32(GPIO_MUX);
- value = FIELD_SET(value, GPIO_MUX, 30, I2C) |
- FIELD_SET(0, GPIO_MUX, 31, I2C);
+ value = FIELD_SET(value, GPIO_MUX, 30, I2C) |
+ FIELD_SET(0, GPIO_MUX, 31, I2C);
POKE32(GPIO_MUX, value);
- /* Enable Hardware I2C power.
- TODO: Check if we need to enable GPIO power?
- */
- enableI2C(1);
-
- /* Enable the I2C Controller and set the bus speed mode */
- value = PEEK32(I2C_CTRL);
- if (busSpeedMode = 0)
- value = FIELD_SET(value, I2C_CTRL, MODE, STANDARD);
- else
- value = FIELD_SET(value, I2C_CTRL, MODE, FAST);
- value = FIELD_SET(value, I2C_CTRL, EN, ENABLE);
- POKE32(I2C_CTRL, value);
-
- return 0;
+ /* Enable Hardware I2C power.
+ TODO: Check if we need to enable GPIO power?
+ */
+ enableI2C(1);
+
+ /* Enable the I2C Controller and set the bus speed mode */
+ value = PEEK32(I2C_CTRL);
+ if (busSpeedMode = 0)
+ value = FIELD_SET(value, I2C_CTRL, MODE, STANDARD);
+ else
+ value = FIELD_SET(value, I2C_CTRL, MODE, FAST);
+ value = FIELD_SET(value, I2C_CTRL, EN, ENABLE);
+ POKE32(I2C_CTRL, value);
+
+ return 0;
}
void hwI2CClose(void)
{
- unsigned int value;
+ unsigned int value;
- /* Disable I2C controller */
- value = PEEK32(I2C_CTRL);
- value = FIELD_SET(value, I2C_CTRL, EN, DISABLE);
- POKE32(I2C_CTRL, value);
+ /* Disable I2C controller */
+ value = PEEK32(I2C_CTRL);
+ value = FIELD_SET(value, I2C_CTRL, EN, DISABLE);
+ POKE32(I2C_CTRL, value);
- /* Disable I2C Power */
- enableI2C(0);
+ /* Disable I2C Power */
+ enableI2C(0);
- /* Set GPIO 30 & 31 back as GPIO pins */
- value = PEEK32(GPIO_MUX);
- value = FIELD_SET(value, GPIO_MUX, 30, GPIO);
- value = FIELD_SET(value, GPIO_MUX, 31, GPIO);
- POKE32(GPIO_MUX, value);
+ /* Set GPIO 30 & 31 back as GPIO pins */
+ value = PEEK32(GPIO_MUX);
+ value = FIELD_SET(value, GPIO_MUX, 30, GPIO);
+ value = FIELD_SET(value, GPIO_MUX, 31, GPIO);
+ POKE32(GPIO_MUX, value);
}
static long hwI2CWaitTXDone(void)
{
- unsigned int timeout;
+ unsigned int timeout;
- /* Wait until the transfer is completed. */
- timeout = HWI2C_WAIT_TIMEOUT;
+ /* Wait until the transfer is completed. */
+ timeout = HWI2C_WAIT_TIMEOUT;
while ((FIELD_GET(PEEK32(I2C_STATUS), I2C_STATUS, TX) != I2C_STATUS_TX_COMPLETED) &&
- (timeout != 0))
+ (timeout != 0))
timeout--;
if (timeout = 0)
- return (-1);
+ return (-1);
- return 0;
+ return 0;
}
@@ -91,53 +91,53 @@ static long hwI2CWaitTXDone(void)
* Total number of bytes those are actually written.
*/
static unsigned int hwI2CWriteData(
- unsigned char deviceAddress,
- unsigned int length,
- unsigned char *pBuffer
+ unsigned char deviceAddress,
+ unsigned int length,
+ unsigned char *pBuffer
)
{
- unsigned char count, i;
- unsigned int totalBytes = 0;
+ unsigned char count, i;
+ unsigned int totalBytes = 0;
- /* Set the Device Address */
- POKE32(I2C_SLAVE_ADDRESS, deviceAddress & ~0x01);
+ /* Set the Device Address */
+ POKE32(I2C_SLAVE_ADDRESS, deviceAddress & ~0x01);
- /* Write data.
- * Note:
- * Only 16 byte can be accessed per i2c start instruction.
- */
- do
- {
- /* Reset I2C by writing 0 to I2C_RESET register to clear the previous status. */
- POKE32(I2C_RESET, 0);
+ /* Write data.
+ * Note:
+ * Only 16 byte can be accessed per i2c start instruction.
+ */
+ do
+ {
+ /* Reset I2C by writing 0 to I2C_RESET register to clear the previous status. */
+ POKE32(I2C_RESET, 0);
- /* Set the number of bytes to be written */
- if (length < MAX_HWI2C_FIFO)
- count = length - 1;
- else
- count = MAX_HWI2C_FIFO - 1;
- POKE32(I2C_BYTE_COUNT, count);
+ /* Set the number of bytes to be written */
+ if (length < MAX_HWI2C_FIFO)
+ count = length - 1;
+ else
+ count = MAX_HWI2C_FIFO - 1;
+ POKE32(I2C_BYTE_COUNT, count);
- /* Move the data to the I2C data register */
- for (i = 0; i <= count; i++)
- POKE32(I2C_DATA0 + i, *pBuffer++);
+ /* Move the data to the I2C data register */
+ for (i = 0; i <= count; i++)
+ POKE32(I2C_DATA0 + i, *pBuffer++);
- /* Start the I2C */
- POKE32(I2C_CTRL, FIELD_SET(PEEK32(I2C_CTRL), I2C_CTRL, CTRL, START));
+ /* Start the I2C */
+ POKE32(I2C_CTRL, FIELD_SET(PEEK32(I2C_CTRL), I2C_CTRL, CTRL, START));
- /* Wait until the transfer is completed. */
- if (hwI2CWaitTXDone() != 0)
- break;
+ /* Wait until the transfer is completed. */
+ if (hwI2CWaitTXDone() != 0)
+ break;
- /* Substract length */
- length -= (count + 1);
+ /* Substract length */
+ length -= (count + 1);
- /* Total byte written */
- totalBytes += (count + 1);
+ /* Total byte written */
+ totalBytes += (count + 1);
- } while (length > 0);
+ } while (length > 0);
- return totalBytes;
+ return totalBytes;
}
@@ -158,53 +158,53 @@ static unsigned int hwI2CWriteData(
* Total number of actual bytes read from the slave device
*/
static unsigned int hwI2CReadData(
- unsigned char deviceAddress,
- unsigned int length,
- unsigned char *pBuffer
+ unsigned char deviceAddress,
+ unsigned int length,
+ unsigned char *pBuffer
)
{
- unsigned char count, i;
- unsigned int totalBytes = 0;
+ unsigned char count, i;
+ unsigned int totalBytes = 0;
- /* Set the Device Address */
- POKE32(I2C_SLAVE_ADDRESS, deviceAddress | 0x01);
+ /* Set the Device Address */
+ POKE32(I2C_SLAVE_ADDRESS, deviceAddress | 0x01);
- /* Read data and save them to the buffer.
- * Note:
- * Only 16 byte can be accessed per i2c start instruction.
- */
- do
- {
- /* Reset I2C by writing 0 to I2C_RESET register to clear all the status. */
- POKE32(I2C_RESET, 0);
+ /* Read data and save them to the buffer.
+ * Note:
+ * Only 16 byte can be accessed per i2c start instruction.
+ */
+ do
+ {
+ /* Reset I2C by writing 0 to I2C_RESET register to clear all the status. */
+ POKE32(I2C_RESET, 0);
- /* Set the number of bytes to be read */
- if (length <= MAX_HWI2C_FIFO)
- count = length - 1;
- else
- count = MAX_HWI2C_FIFO - 1;
- POKE32(I2C_BYTE_COUNT, count);
+ /* Set the number of bytes to be read */
+ if (length <= MAX_HWI2C_FIFO)
+ count = length - 1;
+ else
+ count = MAX_HWI2C_FIFO - 1;
+ POKE32(I2C_BYTE_COUNT, count);
- /* Start the I2C */
- POKE32(I2C_CTRL, FIELD_SET(PEEK32(I2C_CTRL), I2C_CTRL, CTRL, START));
+ /* Start the I2C */
+ POKE32(I2C_CTRL, FIELD_SET(PEEK32(I2C_CTRL), I2C_CTRL, CTRL, START));
- /* Wait until transaction done. */
- if (hwI2CWaitTXDone() != 0)
- break;
+ /* Wait until transaction done. */
+ if (hwI2CWaitTXDone() != 0)
+ break;
- /* Save the data to the given buffer */
- for (i = 0; i <= count; i++)
- *pBuffer++ = PEEK32(I2C_DATA0 + i);
+ /* Save the data to the given buffer */
+ for (i = 0; i <= count; i++)
+ *pBuffer++ = PEEK32(I2C_DATA0 + i);
- /* Substract length by 16 */
- length -= (count + 1);
+ /* Substract length by 16 */
+ length -= (count + 1);
- /* Number of bytes read. */
- totalBytes += (count + 1);
+ /* Number of bytes read. */
+ totalBytes += (count + 1);
- } while (length > 0);
+ } while (length > 0);
- return totalBytes;
+ return totalBytes;
}
@@ -222,16 +222,16 @@ static unsigned int hwI2CReadData(
* Register value
*/
unsigned char hwI2CReadReg(
- unsigned char deviceAddress,
- unsigned char registerIndex
+ unsigned char deviceAddress,
+ unsigned char registerIndex
)
{
- unsigned char value = (0xFF);
+ unsigned char value = (0xFF);
- if (hwI2CWriteData(deviceAddress, 1, ®isterIndex) = 1)
- hwI2CReadData(deviceAddress, 1, &value);
+ if (hwI2CWriteData(deviceAddress, 1, ®isterIndex) = 1)
+ hwI2CReadData(deviceAddress, 1, &value);
- return value;
+ return value;
}
@@ -252,19 +252,19 @@ unsigned char hwI2CReadReg(
* -1 - Fail
*/
int hwI2CWriteReg(
- unsigned char deviceAddress,
- unsigned char registerIndex,
- unsigned char data
+ unsigned char deviceAddress,
+ unsigned char registerIndex,
+ unsigned char data
)
{
- unsigned char value[2];
+ unsigned char value[2];
- value[0] = registerIndex;
- value[1] = data;
- if (hwI2CWriteData(deviceAddress, 2, value) = 2)
- return 0;
+ value[0] = registerIndex;
+ value[1] = data;
+ if (hwI2CWriteData(deviceAddress, 2, value) = 2)
+ return 0;
- return (-1);
+ return (-1);
}
diff --git a/drivers/staging/sm750fb/ddk750_mode.c b/drivers/staging/sm750fb/ddk750_mode.c
index 74313ff..1f93d07 100644
--- a/drivers/staging/sm750fb/ddk750_mode.c
+++ b/drivers/staging/sm750fb/ddk750_mode.c
@@ -20,54 +20,54 @@ static unsigned long displayControlAdjust_SM750LE(mode_parameter_t *pModeParam,
x = pModeParam->horizontal_display_end;
y = pModeParam->vertical_display_end;
- /* SM750LE has to set up the top-left and bottom-right
- registers as well.
- Note that normal SM750/SM718 only use those two register for
- auto-centering mode.
- */
- POKE32(CRT_AUTO_CENTERING_TL,
- FIELD_VALUE(0, CRT_AUTO_CENTERING_TL, TOP, 0)
- | FIELD_VALUE(0, CRT_AUTO_CENTERING_TL, LEFT, 0));
-
- POKE32(CRT_AUTO_CENTERING_BR,
- FIELD_VALUE(0, CRT_AUTO_CENTERING_BR, BOTTOM, y-1)
- | FIELD_VALUE(0, CRT_AUTO_CENTERING_BR, RIGHT, x-1));
-
- /* Assume common fields in dispControl have been properly set before
- calling this function.
- This function only sets the extra fields in dispControl.
- */
+ /* SM750LE has to set up the top-left and bottom-right
+ registers as well.
+ Note that normal SM750/SM718 only use those two register for
+ auto-centering mode.
+ */
+ POKE32(CRT_AUTO_CENTERING_TL,
+ FIELD_VALUE(0, CRT_AUTO_CENTERING_TL, TOP, 0)
+ | FIELD_VALUE(0, CRT_AUTO_CENTERING_TL, LEFT, 0));
+
+ POKE32(CRT_AUTO_CENTERING_BR,
+ FIELD_VALUE(0, CRT_AUTO_CENTERING_BR, BOTTOM, y-1)
+ | FIELD_VALUE(0, CRT_AUTO_CENTERING_BR, RIGHT, x-1));
+
+ /* Assume common fields in dispControl have been properly set before
+ calling this function.
+ This function only sets the extra fields in dispControl.
+ */
/* Clear bit 29:27 of display control register */
- dispControl &= FIELD_CLEAR(CRT_DISPLAY_CTRL, CLK);
+ dispControl &= FIELD_CLEAR(CRT_DISPLAY_CTRL, CLK);
/* Set bit 29:27 of display control register for the right clock */
/* Note that SM750LE only need to supported 7 resoluitons. */
if ( x = 800 && y = 600 )
- dispControl = FIELD_SET(dispControl, CRT_DISPLAY_CTRL, CLK, PLL41);
+ dispControl = FIELD_SET(dispControl, CRT_DISPLAY_CTRL, CLK, PLL41);
else if (x = 1024 && y = 768)
- dispControl = FIELD_SET(dispControl, CRT_DISPLAY_CTRL, CLK, PLL65);
+ dispControl = FIELD_SET(dispControl, CRT_DISPLAY_CTRL, CLK, PLL65);
else if (x = 1152 && y = 864)
- dispControl = FIELD_SET(dispControl, CRT_DISPLAY_CTRL, CLK, PLL80);
+ dispControl = FIELD_SET(dispControl, CRT_DISPLAY_CTRL, CLK, PLL80);
else if (x = 1280 && y = 768)
- dispControl = FIELD_SET(dispControl, CRT_DISPLAY_CTRL, CLK, PLL80);
+ dispControl = FIELD_SET(dispControl, CRT_DISPLAY_CTRL, CLK, PLL80);
else if (x = 1280 && y = 720)
- dispControl = FIELD_SET(dispControl, CRT_DISPLAY_CTRL, CLK, PLL74);
+ dispControl = FIELD_SET(dispControl, CRT_DISPLAY_CTRL, CLK, PLL74);
else if (x = 1280 && y = 960)
- dispControl = FIELD_SET(dispControl, CRT_DISPLAY_CTRL, CLK, PLL108);
+ dispControl = FIELD_SET(dispControl, CRT_DISPLAY_CTRL, CLK, PLL108);
else if (x = 1280 && y = 1024)
- dispControl = FIELD_SET(dispControl, CRT_DISPLAY_CTRL, CLK, PLL108);
+ dispControl = FIELD_SET(dispControl, CRT_DISPLAY_CTRL, CLK, PLL108);
else /* default to VGA clock */
- dispControl = FIELD_SET(dispControl, CRT_DISPLAY_CTRL, CLK, PLL25);
+ dispControl = FIELD_SET(dispControl, CRT_DISPLAY_CTRL, CLK, PLL25);
/* Set bit 25:24 of display controller */
- dispControl = FIELD_SET(dispControl, CRT_DISPLAY_CTRL, CRTSELECT, CRT);
- dispControl = FIELD_SET(dispControl, CRT_DISPLAY_CTRL, RGBBIT, 24BIT);
+ dispControl = FIELD_SET(dispControl, CRT_DISPLAY_CTRL, CRTSELECT, CRT);
+ dispControl = FIELD_SET(dispControl, CRT_DISPLAY_CTRL, RGBBIT, 24BIT);
- /* Set bit 14 of display controller */
- dispControl = FIELD_SET(dispControl, CRT_DISPLAY_CTRL, CLOCK_PHASE, ACTIVE_LOW);
+ /* Set bit 14 of display controller */
+ dispControl = FIELD_SET(dispControl, CRT_DISPLAY_CTRL, CLOCK_PHASE, ACTIVE_LOW);
- POKE32(CRT_DISPLAY_CTRL, dispControl);
+ POKE32(CRT_DISPLAY_CTRL, dispControl);
return dispControl;
}
@@ -84,21 +84,21 @@ static int programModeRegisters(mode_parameter_t *pModeParam, pll_value_t *pll)
{
/* programe secondary pixel clock */
POKE32(CRT_PLL_CTRL, formatPllReg(pll));
- POKE32(CRT_HORIZONTAL_TOTAL,
- FIELD_VALUE(0, CRT_HORIZONTAL_TOTAL, TOTAL, pModeParam->horizontal_total - 1)
- | FIELD_VALUE(0, CRT_HORIZONTAL_TOTAL, DISPLAY_END, pModeParam->horizontal_display_end - 1));
+ POKE32(CRT_HORIZONTAL_TOTAL,
+ FIELD_VALUE(0, CRT_HORIZONTAL_TOTAL, TOTAL, pModeParam->horizontal_total - 1)
+ | FIELD_VALUE(0, CRT_HORIZONTAL_TOTAL, DISPLAY_END, pModeParam->horizontal_display_end - 1));
- POKE32(CRT_HORIZONTAL_SYNC,
- FIELD_VALUE(0, CRT_HORIZONTAL_SYNC, WIDTH, pModeParam->horizontal_sync_width)
- | FIELD_VALUE(0, CRT_HORIZONTAL_SYNC, START, pModeParam->horizontal_sync_start - 1));
+ POKE32(CRT_HORIZONTAL_SYNC,
+ FIELD_VALUE(0, CRT_HORIZONTAL_SYNC, WIDTH, pModeParam->horizontal_sync_width)
+ | FIELD_VALUE(0, CRT_HORIZONTAL_SYNC, START, pModeParam->horizontal_sync_start - 1));
- POKE32(CRT_VERTICAL_TOTAL,
- FIELD_VALUE(0, CRT_VERTICAL_TOTAL, TOTAL, pModeParam->vertical_total - 1)
- | FIELD_VALUE(0, CRT_VERTICAL_TOTAL, DISPLAY_END, pModeParam->vertical_display_end - 1));
+ POKE32(CRT_VERTICAL_TOTAL,
+ FIELD_VALUE(0, CRT_VERTICAL_TOTAL, TOTAL, pModeParam->vertical_total - 1)
+ | FIELD_VALUE(0, CRT_VERTICAL_TOTAL, DISPLAY_END, pModeParam->vertical_display_end - 1));
- POKE32(CRT_VERTICAL_SYNC,
- FIELD_VALUE(0, CRT_VERTICAL_SYNC, HEIGHT, pModeParam->vertical_sync_height)
- | FIELD_VALUE(0, CRT_VERTICAL_SYNC, START, pModeParam->vertical_sync_start - 1));
+ POKE32(CRT_VERTICAL_SYNC,
+ FIELD_VALUE(0, CRT_VERTICAL_SYNC, HEIGHT, pModeParam->vertical_sync_height)
+ | FIELD_VALUE(0, CRT_VERTICAL_SYNC, START, pModeParam->vertical_sync_start - 1));
ulTmpValue = FIELD_VALUE(0, CRT_DISPLAY_CTRL, VSYNC_PHASE, pModeParam->vertical_sync_polarity)|
@@ -125,39 +125,39 @@ static int programModeRegisters(mode_parameter_t *pModeParam, pll_value_t *pll)
unsigned int ulReservedBits;
POKE32(PANEL_PLL_CTRL, formatPllReg(pll));
- POKE32(PANEL_HORIZONTAL_TOTAL,
- FIELD_VALUE(0, PANEL_HORIZONTAL_TOTAL, TOTAL, pModeParam->horizontal_total - 1)
- | FIELD_VALUE(0, PANEL_HORIZONTAL_TOTAL, DISPLAY_END, pModeParam->horizontal_display_end - 1));
+ POKE32(PANEL_HORIZONTAL_TOTAL,
+ FIELD_VALUE(0, PANEL_HORIZONTAL_TOTAL, TOTAL, pModeParam->horizontal_total - 1)
+ | FIELD_VALUE(0, PANEL_HORIZONTAL_TOTAL, DISPLAY_END, pModeParam->horizontal_display_end - 1));
- POKE32(PANEL_HORIZONTAL_SYNC,
- FIELD_VALUE(0, PANEL_HORIZONTAL_SYNC, WIDTH, pModeParam->horizontal_sync_width)
- | FIELD_VALUE(0, PANEL_HORIZONTAL_SYNC, START, pModeParam->horizontal_sync_start - 1));
+ POKE32(PANEL_HORIZONTAL_SYNC,
+ FIELD_VALUE(0, PANEL_HORIZONTAL_SYNC, WIDTH, pModeParam->horizontal_sync_width)
+ | FIELD_VALUE(0, PANEL_HORIZONTAL_SYNC, START, pModeParam->horizontal_sync_start - 1));
- POKE32(PANEL_VERTICAL_TOTAL,
- FIELD_VALUE(0, PANEL_VERTICAL_TOTAL, TOTAL, pModeParam->vertical_total - 1)
- | FIELD_VALUE(0, PANEL_VERTICAL_TOTAL, DISPLAY_END, pModeParam->vertical_display_end - 1));
+ POKE32(PANEL_VERTICAL_TOTAL,
+ FIELD_VALUE(0, PANEL_VERTICAL_TOTAL, TOTAL, pModeParam->vertical_total - 1)
+ | FIELD_VALUE(0, PANEL_VERTICAL_TOTAL, DISPLAY_END, pModeParam->vertical_display_end - 1));
- POKE32(PANEL_VERTICAL_SYNC,
- FIELD_VALUE(0, PANEL_VERTICAL_SYNC, HEIGHT, pModeParam->vertical_sync_height)
- | FIELD_VALUE(0, PANEL_VERTICAL_SYNC, START, pModeParam->vertical_sync_start - 1));
+ POKE32(PANEL_VERTICAL_SYNC,
+ FIELD_VALUE(0, PANEL_VERTICAL_SYNC, HEIGHT, pModeParam->vertical_sync_height)
+ | FIELD_VALUE(0, PANEL_VERTICAL_SYNC, START, pModeParam->vertical_sync_start - 1));
ulTmpValue = FIELD_VALUE(0, PANEL_DISPLAY_CTRL, VSYNC_PHASE, pModeParam->vertical_sync_polarity)|
- FIELD_VALUE(0, PANEL_DISPLAY_CTRL, HSYNC_PHASE, pModeParam->horizontal_sync_polarity)|
- FIELD_VALUE(0, PANEL_DISPLAY_CTRL, CLOCK_PHASE, pModeParam->clock_phase_polarity)|
- FIELD_SET(0, PANEL_DISPLAY_CTRL, TIMING, ENABLE)|
- FIELD_SET(0, PANEL_DISPLAY_CTRL, PLANE, ENABLE);
-
- ulReservedBits = FIELD_SET(0, PANEL_DISPLAY_CTRL, RESERVED_1_MASK, ENABLE) |
- FIELD_SET(0, PANEL_DISPLAY_CTRL, RESERVED_2_MASK, ENABLE) |
- FIELD_SET(0, PANEL_DISPLAY_CTRL, RESERVED_3_MASK, ENABLE)|
- FIELD_SET(0, PANEL_DISPLAY_CTRL, VSYNC, ACTIVE_LOW);
-
- ulReg = (PEEK32(PANEL_DISPLAY_CTRL) & ~ulReservedBits)
- & FIELD_CLEAR(PANEL_DISPLAY_CTRL, CLOCK_PHASE)
- & FIELD_CLEAR(PANEL_DISPLAY_CTRL, VSYNC_PHASE)
- & FIELD_CLEAR(PANEL_DISPLAY_CTRL, HSYNC_PHASE)
- & FIELD_CLEAR(PANEL_DISPLAY_CTRL, TIMING)
- & FIELD_CLEAR(PANEL_DISPLAY_CTRL, PLANE);
+ FIELD_VALUE(0, PANEL_DISPLAY_CTRL, HSYNC_PHASE, pModeParam->horizontal_sync_polarity)|
+ FIELD_VALUE(0, PANEL_DISPLAY_CTRL, CLOCK_PHASE, pModeParam->clock_phase_polarity)|
+ FIELD_SET(0, PANEL_DISPLAY_CTRL, TIMING, ENABLE)|
+ FIELD_SET(0, PANEL_DISPLAY_CTRL, PLANE, ENABLE);
+
+ ulReservedBits = FIELD_SET(0, PANEL_DISPLAY_CTRL, RESERVED_1_MASK, ENABLE) |
+ FIELD_SET(0, PANEL_DISPLAY_CTRL, RESERVED_2_MASK, ENABLE) |
+ FIELD_SET(0, PANEL_DISPLAY_CTRL, RESERVED_3_MASK, ENABLE)|
+ FIELD_SET(0, PANEL_DISPLAY_CTRL, VSYNC, ACTIVE_LOW);
+
+ ulReg = (PEEK32(PANEL_DISPLAY_CTRL) & ~ulReservedBits)
+ & FIELD_CLEAR(PANEL_DISPLAY_CTRL, CLOCK_PHASE)
+ & FIELD_CLEAR(PANEL_DISPLAY_CTRL, VSYNC_PHASE)
+ & FIELD_CLEAR(PANEL_DISPLAY_CTRL, HSYNC_PHASE)
+ & FIELD_CLEAR(PANEL_DISPLAY_CTRL, TIMING)
+ & FIELD_CLEAR(PANEL_DISPLAY_CTRL, PLANE);
/* May a hardware bug or just my test chip (not confirmed).
diff --git a/drivers/staging/sm750fb/ddk750_mode.h b/drivers/staging/sm750fb/ddk750_mode.h
index 4e8fab3..3548d67 100644
--- a/drivers/staging/sm750fb/ddk750_mode.h
+++ b/drivers/staging/sm750fb/ddk750_mode.h
@@ -5,35 +5,35 @@
typedef enum _spolarity_t
{
- POS = 0, /* positive */
- NEG, /* negative */
+ POS = 0, /* positive */
+ NEG, /* negative */
}
spolarity_t;
typedef struct _mode_parameter_t
{
- /* Horizontal timing. */
- unsigned long horizontal_total;
- unsigned long horizontal_display_end;
- unsigned long horizontal_sync_start;
- unsigned long horizontal_sync_width;
- spolarity_t horizontal_sync_polarity;
-
- /* Vertical timing. */
- unsigned long vertical_total;
- unsigned long vertical_display_end;
- unsigned long vertical_sync_start;
- unsigned long vertical_sync_height;
- spolarity_t vertical_sync_polarity;
-
- /* Refresh timing. */
- unsigned long pixel_clock;
- unsigned long horizontal_frequency;
- unsigned long vertical_frequency;
-
- /* Clock Phase. This clock phase only applies to Panel. */
- spolarity_t clock_phase_polarity;
+ /* Horizontal timing. */
+ unsigned long horizontal_total;
+ unsigned long horizontal_display_end;
+ unsigned long horizontal_sync_start;
+ unsigned long horizontal_sync_width;
+ spolarity_t horizontal_sync_polarity;
+
+ /* Vertical timing. */
+ unsigned long vertical_total;
+ unsigned long vertical_display_end;
+ unsigned long vertical_sync_start;
+ unsigned long vertical_sync_height;
+ spolarity_t vertical_sync_polarity;
+
+ /* Refresh timing. */
+ unsigned long pixel_clock;
+ unsigned long horizontal_frequency;
+ unsigned long vertical_frequency;
+
+ /* Clock Phase. This clock phase only applies to Panel. */
+ spolarity_t clock_phase_polarity;
}
mode_parameter_t;
diff --git a/drivers/staging/sm750fb/ddk750_power.c b/drivers/staging/sm750fb/ddk750_power.c
index 1e5f398..b7a108b 100644
--- a/drivers/staging/sm750fb/ddk750_power.c
+++ b/drivers/staging/sm750fb/ddk750_power.c
@@ -19,7 +19,7 @@ unsigned int getPowerMode(void)
{
if(getChipType() = SM750LE)
return 0;
- return (FIELD_GET(PEEK32(POWER_MODE_CTRL), POWER_MODE_CTRL, MODE));
+ return (FIELD_GET(PEEK32(POWER_MODE_CTRL), POWER_MODE_CTRL, MODE));
}
@@ -29,76 +29,76 @@ unsigned int getPowerMode(void)
*/
void setPowerMode(unsigned int powerMode)
{
- unsigned int control_value = 0;
+ unsigned int control_value = 0;
- control_value = PEEK32(POWER_MODE_CTRL);
+ control_value = PEEK32(POWER_MODE_CTRL);
if(getChipType() = SM750LE)
return;
- switch (powerMode)
- {
- case POWER_MODE_CTRL_MODE_MODE0:
- control_value = FIELD_SET(control_value, POWER_MODE_CTRL, MODE, MODE0);
- break;
+ switch (powerMode)
+ {
+ case POWER_MODE_CTRL_MODE_MODE0:
+ control_value = FIELD_SET(control_value, POWER_MODE_CTRL, MODE, MODE0);
+ break;
- case POWER_MODE_CTRL_MODE_MODE1:
- control_value = FIELD_SET(control_value, POWER_MODE_CTRL, MODE, MODE1);
- break;
+ case POWER_MODE_CTRL_MODE_MODE1:
+ control_value = FIELD_SET(control_value, POWER_MODE_CTRL, MODE, MODE1);
+ break;
- case POWER_MODE_CTRL_MODE_SLEEP:
- control_value = FIELD_SET(control_value, POWER_MODE_CTRL, MODE, SLEEP);
- break;
+ case POWER_MODE_CTRL_MODE_SLEEP:
+ control_value = FIELD_SET(control_value, POWER_MODE_CTRL, MODE, SLEEP);
+ break;
- default:
- break;
- }
+ default:
+ break;
+ }
- /* Set up other fields in Power Control Register */
- if (powerMode = POWER_MODE_CTRL_MODE_SLEEP)
- {
- control_value + /* Set up other fields in Power Control Register */
+ if (powerMode = POWER_MODE_CTRL_MODE_SLEEP)
+ {
+ control_value #ifdef VALIDATION_CHIP
- FIELD_SET( control_value, POWER_MODE_CTRL, 336CLK, OFF) |
+ FIELD_SET( control_value, POWER_MODE_CTRL, 336CLK, OFF) |
#endif
- FIELD_SET( control_value, POWER_MODE_CTRL, OSC_INPUT, OFF);
- }
- else
- {
- control_value + FIELD_SET( control_value, POWER_MODE_CTRL, OSC_INPUT, OFF);
+ }
+ else
+ {
+ control_value #ifdef VALIDATION_CHIP
- FIELD_SET( control_value, POWER_MODE_CTRL, 336CLK, ON) |
+ FIELD_SET( control_value, POWER_MODE_CTRL, 336CLK, ON) |
#endif
- FIELD_SET( control_value, POWER_MODE_CTRL, OSC_INPUT, ON);
- }
+ FIELD_SET( control_value, POWER_MODE_CTRL, OSC_INPUT, ON);
+ }
- /* Program new power mode. */
- POKE32(POWER_MODE_CTRL, control_value);
+ /* Program new power mode. */
+ POKE32(POWER_MODE_CTRL, control_value);
}
void setCurrentGate(unsigned int gate)
{
- unsigned int gate_reg;
- unsigned int mode;
-
- /* Get current power mode. */
- mode = getPowerMode();
-
- switch (mode)
- {
- case POWER_MODE_CTRL_MODE_MODE0:
- gate_reg = MODE0_GATE;
- break;
-
- case POWER_MODE_CTRL_MODE_MODE1:
- gate_reg = MODE1_GATE;
- break;
-
- default:
- gate_reg = MODE0_GATE;
- break;
- }
- POKE32(gate_reg, gate);
+ unsigned int gate_reg;
+ unsigned int mode;
+
+ /* Get current power mode. */
+ mode = getPowerMode();
+
+ switch (mode)
+ {
+ case POWER_MODE_CTRL_MODE_MODE0:
+ gate_reg = MODE0_GATE;
+ break;
+
+ case POWER_MODE_CTRL_MODE_MODE1:
+ gate_reg = MODE1_GATE;
+ break;
+
+ default:
+ gate_reg = MODE0_GATE;
+ break;
+ }
+ POKE32(gate_reg, gate);
}
@@ -108,21 +108,21 @@ void setCurrentGate(unsigned int gate)
*/
void enable2DEngine(unsigned int enable)
{
- uint32_t gate;
-
- gate = PEEK32(CURRENT_GATE);
- if (enable)
- {
- gate = FIELD_SET(gate, CURRENT_GATE, DE, ON);
- gate = FIELD_SET(gate, CURRENT_GATE, CSC, ON);
- }
- else
- {
- gate = FIELD_SET(gate, CURRENT_GATE, DE, OFF);
- gate = FIELD_SET(gate, CURRENT_GATE, CSC, OFF);
- }
-
- setCurrentGate(gate);
+ uint32_t gate;
+
+ gate = PEEK32(CURRENT_GATE);
+ if (enable)
+ {
+ gate = FIELD_SET(gate, CURRENT_GATE, DE, ON);
+ gate = FIELD_SET(gate, CURRENT_GATE, CSC, ON);
+ }
+ else
+ {
+ gate = FIELD_SET(gate, CURRENT_GATE, DE, OFF);
+ gate = FIELD_SET(gate, CURRENT_GATE, CSC, OFF);
+ }
+
+ setCurrentGate(gate);
}
@@ -131,58 +131,58 @@ void enable2DEngine(unsigned int enable)
*/
void enableZVPort(unsigned int enable)
{
- uint32_t gate;
+ uint32_t gate;
- /* Enable ZV Port Gate */
- gate = PEEK32(CURRENT_GATE);
- if (enable)
- {
- gate = FIELD_SET(gate, CURRENT_GATE, ZVPORT, ON);
+ /* Enable ZV Port Gate */
+ gate = PEEK32(CURRENT_GATE);
+ if (enable)
+ {
+ gate = FIELD_SET(gate, CURRENT_GATE, ZVPORT, ON);
#if 1
- /* Using Software I2C */
- gate = FIELD_SET(gate, CURRENT_GATE, GPIO, ON);
+ /* Using Software I2C */
+ gate = FIELD_SET(gate, CURRENT_GATE, GPIO, ON);
#else
- /* Using Hardware I2C */
- gate = FIELD_SET(gate, CURRENT_GATE, I2C, ON);
+ /* Using Hardware I2C */
+ gate = FIELD_SET(gate, CURRENT_GATE, I2C, ON);
#endif
- }
- else
- {
- /* Disable ZV Port Gate. There is no way to know whether the GPIO pins are being used
- or not. Therefore, do not disable the GPIO gate. */
- gate = FIELD_SET(gate, CURRENT_GATE, ZVPORT, OFF);
- }
-
- setCurrentGate(gate);
+ }
+ else
+ {
+ /* Disable ZV Port Gate. There is no way to know whether the GPIO pins are being used
+ or not. Therefore, do not disable the GPIO gate. */
+ gate = FIELD_SET(gate, CURRENT_GATE, ZVPORT, OFF);
+ }
+
+ setCurrentGate(gate);
}
void enableSSP(unsigned int enable)
{
- uint32_t gate;
+ uint32_t gate;
- /* Enable SSP Gate */
- gate = PEEK32(CURRENT_GATE);
- if (enable)
- gate = FIELD_SET(gate, CURRENT_GATE, SSP, ON);
- else
- gate = FIELD_SET(gate, CURRENT_GATE, SSP, OFF);
+ /* Enable SSP Gate */
+ gate = PEEK32(CURRENT_GATE);
+ if (enable)
+ gate = FIELD_SET(gate, CURRENT_GATE, SSP, ON);
+ else
+ gate = FIELD_SET(gate, CURRENT_GATE, SSP, OFF);
- setCurrentGate(gate);
+ setCurrentGate(gate);
}
void enableDMA(unsigned int enable)
{
- uint32_t gate;
+ uint32_t gate;
- /* Enable DMA Gate */
- gate = PEEK32(CURRENT_GATE);
- if (enable)
- gate = FIELD_SET(gate, CURRENT_GATE, DMA, ON);
- else
- gate = FIELD_SET(gate, CURRENT_GATE, DMA, OFF);
+ /* Enable DMA Gate */
+ gate = PEEK32(CURRENT_GATE);
+ if (enable)
+ gate = FIELD_SET(gate, CURRENT_GATE, DMA, ON);
+ else
+ gate = FIELD_SET(gate, CURRENT_GATE, DMA, OFF);
- setCurrentGate(gate);
+ setCurrentGate(gate);
}
/*
@@ -190,16 +190,16 @@ void enableDMA(unsigned int enable)
*/
void enableGPIO(unsigned int enable)
{
- uint32_t gate;
+ uint32_t gate;
- /* Enable GPIO Gate */
- gate = PEEK32(CURRENT_GATE);
- if (enable)
- gate = FIELD_SET(gate, CURRENT_GATE, GPIO, ON);
- else
- gate = FIELD_SET(gate, CURRENT_GATE, GPIO, OFF);
+ /* Enable GPIO Gate */
+ gate = PEEK32(CURRENT_GATE);
+ if (enable)
+ gate = FIELD_SET(gate, CURRENT_GATE, GPIO, ON);
+ else
+ gate = FIELD_SET(gate, CURRENT_GATE, GPIO, OFF);
- setCurrentGate(gate);
+ setCurrentGate(gate);
}
/*
@@ -207,16 +207,16 @@ void enableGPIO(unsigned int enable)
*/
void enablePWM(unsigned int enable)
{
- uint32_t gate;
+ uint32_t gate;
- /* Enable PWM Gate */
- gate = PEEK32(CURRENT_GATE);
- if (enable)
- gate = FIELD_SET(gate, CURRENT_GATE, PWM, ON);
- else
- gate = FIELD_SET(gate, CURRENT_GATE, PWM, OFF);
+ /* Enable PWM Gate */
+ gate = PEEK32(CURRENT_GATE);
+ if (enable)
+ gate = FIELD_SET(gate, CURRENT_GATE, PWM, ON);
+ else
+ gate = FIELD_SET(gate, CURRENT_GATE, PWM, OFF);
- setCurrentGate(gate);
+ setCurrentGate(gate);
}
/*
@@ -224,16 +224,16 @@ void enablePWM(unsigned int enable)
*/
void enableI2C(unsigned int enable)
{
- uint32_t gate;
+ uint32_t gate;
- /* Enable I2C Gate */
- gate = PEEK32(CURRENT_GATE);
- if (enable)
- gate = FIELD_SET(gate, CURRENT_GATE, I2C, ON);
- else
- gate = FIELD_SET(gate, CURRENT_GATE, I2C, OFF);
+ /* Enable I2C Gate */
+ gate = PEEK32(CURRENT_GATE);
+ if (enable)
+ gate = FIELD_SET(gate, CURRENT_GATE, I2C, ON);
+ else
+ gate = FIELD_SET(gate, CURRENT_GATE, I2C, OFF);
- setCurrentGate(gate);
+ setCurrentGate(gate);
}
diff --git a/drivers/staging/sm750fb/ddk750_power.h b/drivers/staging/sm750fb/ddk750_power.h
index 4e00955..a20d438 100644
--- a/drivers/staging/sm750fb/ddk750_power.h
+++ b/drivers/staging/sm750fb/ddk750_power.h
@@ -3,10 +3,10 @@
typedef enum _DPMS_t
{
- crtDPMS_ON = 0x0,
- crtDPMS_STANDBY = 0x1,
- crtDPMS_SUSPEND = 0x2,
- crtDPMS_OFF = 0x3,
+ crtDPMS_ON = 0x0,
+ crtDPMS_STANDBY = 0x1,
+ crtDPMS_SUSPEND = 0x2,
+ crtDPMS_OFF = 0x3,
}
DPMS_t;
diff --git a/drivers/staging/sm750fb/ddk750_reg.h b/drivers/staging/sm750fb/ddk750_reg.h
index 1a40dc2..2995625 100644
--- a/drivers/staging/sm750fb/ddk750_reg.h
+++ b/drivers/staging/sm750fb/ddk750_reg.h
@@ -1640,9 +1640,9 @@
/* CRT Graphics Control */
#define CRT_DISPLAY_CTRL 0x080200
-#define CRT_DISPLAY_CTRL_RESERVED_1_MASK 31:27
-#define CRT_DISPLAY_CTRL_RESERVED_1_MASK_DISABLE 0
-#define CRT_DISPLAY_CTRL_RESERVED_1_MASK_ENABLE 0x1F
+#define CRT_DISPLAY_CTRL_RESERVED_1_MASK 31:27
+#define CRT_DISPLAY_CTRL_RESERVED_1_MASK_DISABLE 0
+#define CRT_DISPLAY_CTRL_RESERVED_1_MASK_ENABLE 0x1F
/* SM750LE definition */
#define CRT_DISPLAY_CTRL_DPMS 31:30
@@ -1664,9 +1664,9 @@
#define CRT_DISPLAY_CTRL_SHIFT_VGA_DAC_ENABLE 0
-#define CRT_DISPLAY_CTRL_RESERVED_2_MASK 25:24
-#define CRT_DISPLAY_CTRL_RESERVED_2_MASK_ENABLE 3
-#define CRT_DISPLAY_CTRL_RESERVED_2_MASK_DISABLE 0
+#define CRT_DISPLAY_CTRL_RESERVED_2_MASK 25:24
+#define CRT_DISPLAY_CTRL_RESERVED_2_MASK_ENABLE 3
+#define CRT_DISPLAY_CTRL_RESERVED_2_MASK_DISABLE 0
/* SM750LE definition */
#define CRT_DISPLAY_CTRL_CRTSELECT 25:25
@@ -1677,11 +1677,11 @@
#define CRT_DISPLAY_CTRL_RGBBIT_12BIT 1
-#define CRT_DISPLAY_CTRL_RESERVED_3_MASK 15:15
+#define CRT_DISPLAY_CTRL_RESERVED_3_MASK 15:15
#define CRT_DISPLAY_CTRL_RESERVED_3_MASK_DISABLE 0
#define CRT_DISPLAY_CTRL_RESERVED_3_MASK_ENABLE 1
-#define CRT_DISPLAY_CTRL_RESERVED_4_MASK 9:9
+#define CRT_DISPLAY_CTRL_RESERVED_4_MASK 9:9
#define CRT_DISPLAY_CTRL_RESERVED_4_MASK_DISABLE 0
#define CRT_DISPLAY_CTRL_RESERVED_4_MASK_ENABLE 1
@@ -1882,7 +1882,7 @@
#endif
/* sm750le new register to control panel output */
-#define DISPLAY_CONTROL_750LE 0x80288
+#define DISPLAY_CONTROL_750LE 0x80288
/* Palette RAM */
/* Panel Palette register starts at 0x080400 ~ 0x0807FC */
diff --git a/drivers/staging/sm750fb/ddk750_sii164.c b/drivers/staging/sm750fb/ddk750_sii164.c
index b6395b8..7f58fbe 100644
--- a/drivers/staging/sm750fb/ddk750_sii164.c
+++ b/drivers/staging/sm750fb/ddk750_sii164.c
@@ -36,12 +36,12 @@ static char *gDviCtrlChipName = "Silicon Image SiI 164";
*/
unsigned short sii164GetVendorID(void)
{
- unsigned short vendorID;
+ unsigned short vendorID;
- vendorID = ((unsigned short) i2cReadReg(SII164_I2C_ADDRESS, SII164_VENDOR_ID_HIGH) << 8) |
- (unsigned short) i2cReadReg(SII164_I2C_ADDRESS, SII164_VENDOR_ID_LOW);
+ vendorID = ((unsigned short) i2cReadReg(SII164_I2C_ADDRESS, SII164_VENDOR_ID_HIGH) << 8) |
+ (unsigned short) i2cReadReg(SII164_I2C_ADDRESS, SII164_VENDOR_ID_LOW);
- return vendorID;
+ return vendorID;
}
/*
@@ -53,12 +53,12 @@ unsigned short sii164GetVendorID(void)
*/
unsigned short sii164GetDeviceID(void)
{
- unsigned short deviceID;
+ unsigned short deviceID;
- deviceID = ((unsigned short) i2cReadReg(SII164_I2C_ADDRESS, SII164_DEVICE_ID_HIGH) << 8) |
- (unsigned short) i2cReadReg(SII164_I2C_ADDRESS, SII164_DEVICE_ID_LOW);
+ deviceID = ((unsigned short) i2cReadReg(SII164_I2C_ADDRESS, SII164_DEVICE_ID_HIGH) << 8) |
+ (unsigned short) i2cReadReg(SII164_I2C_ADDRESS, SII164_DEVICE_ID_LOW);
- return deviceID;
+ return deviceID;
}
@@ -113,132 +113,132 @@ unsigned short sii164GetDeviceID(void)
* -1 - Fail.
*/
long sii164InitChip(
- unsigned char edgeSelect,
- unsigned char busSelect,
- unsigned char dualEdgeClkSelect,
- unsigned char hsyncEnable,
- unsigned char vsyncEnable,
- unsigned char deskewEnable,
- unsigned char deskewSetting,
- unsigned char continuousSyncEnable,
- unsigned char pllFilterEnable,
- unsigned char pllFilterValue
+ unsigned char edgeSelect,
+ unsigned char busSelect,
+ unsigned char dualEdgeClkSelect,
+ unsigned char hsyncEnable,
+ unsigned char vsyncEnable,
+ unsigned char deskewEnable,
+ unsigned char deskewSetting,
+ unsigned char continuousSyncEnable,
+ unsigned char pllFilterEnable,
+ unsigned char pllFilterValue
)
{
unsigned char config;
- /* Initialize the i2c bus */
+ /* Initialize the i2c bus */
#ifdef USE_HW_I2C
- /* Use fast mode. */
- hwI2CInit(1);
+ /* Use fast mode. */
+ hwI2CInit(1);
#else
- swI2CInit(DEFAULT_I2C_SCL, DEFAULT_I2C_SDA);
+ swI2CInit(DEFAULT_I2C_SCL, DEFAULT_I2C_SDA);
#endif
- /* Check if SII164 Chip exists */
- if ((sii164GetVendorID() = SII164_VENDOR_ID) && (sii164GetDeviceID() = SII164_DEVICE_ID))
- {
- /*
- * Initialize SII164 controller chip.
- */
-
- /* Select the edge */
- if (edgeSelect = 0)
- config = SII164_CONFIGURATION_LATCH_FALLING;
- else
- config = SII164_CONFIGURATION_LATCH_RISING;
-
- /* Select bus wide */
- if (busSelect = 0)
- config |= SII164_CONFIGURATION_BUS_12BITS;
- else
- config |= SII164_CONFIGURATION_BUS_24BITS;
-
- /* Select Dual/Single Edge Clock */
- if (dualEdgeClkSelect = 0)
- config |= SII164_CONFIGURATION_CLOCK_SINGLE;
- else
- config |= SII164_CONFIGURATION_CLOCK_DUAL;
-
- /* Select HSync Enable */
- if (hsyncEnable = 0)
- config |= SII164_CONFIGURATION_HSYNC_FORCE_LOW;
- else
- config |= SII164_CONFIGURATION_HSYNC_AS_IS;
-
- /* Select VSync Enable */
- if (vsyncEnable = 0)
- config |= SII164_CONFIGURATION_VSYNC_FORCE_LOW;
- else
- config |= SII164_CONFIGURATION_VSYNC_AS_IS;
-
- i2cWriteReg(SII164_I2C_ADDRESS, SII164_CONFIGURATION, config);
-
- /* De-skew enabled with default 111b value.
- This will fix some artifacts problem in some mode on board 2.2.
- Somehow this fix does not affect board 2.1.
- */
- if (deskewEnable = 0)
- config = SII164_DESKEW_DISABLE;
- else
- config = SII164_DESKEW_ENABLE;
-
- switch (deskewSetting)
- {
- case 0:
- config |= SII164_DESKEW_1_STEP;
- break;
- case 1:
- config |= SII164_DESKEW_2_STEP;
- break;
- case 2:
- config |= SII164_DESKEW_3_STEP;
- break;
- case 3:
- config |= SII164_DESKEW_4_STEP;
- break;
- case 4:
- config |= SII164_DESKEW_5_STEP;
- break;
- case 5:
- config |= SII164_DESKEW_6_STEP;
- break;
- case 6:
- config |= SII164_DESKEW_7_STEP;
- break;
- case 7:
- config |= SII164_DESKEW_8_STEP;
- break;
- }
- i2cWriteReg(SII164_I2C_ADDRESS, SII164_DESKEW, config);
-
- /* Enable/Disable Continuous Sync. */
- if (continuousSyncEnable = 0)
- config = SII164_PLL_FILTER_SYNC_CONTINUOUS_DISABLE;
- else
- config = SII164_PLL_FILTER_SYNC_CONTINUOUS_ENABLE;
-
- /* Enable/Disable PLL Filter */
- if (pllFilterEnable = 0)
- config |= SII164_PLL_FILTER_DISABLE;
- else
- config |= SII164_PLL_FILTER_ENABLE;
-
- /* Set the PLL Filter value */
- config |= ((pllFilterValue & 0x07) << 1);
-
- i2cWriteReg(SII164_I2C_ADDRESS, SII164_PLL, config);
-
- /* Recover from Power Down and enable output. */
- config = i2cReadReg(SII164_I2C_ADDRESS, SII164_CONFIGURATION);
- config |= SII164_CONFIGURATION_POWER_NORMAL;
- i2cWriteReg(SII164_I2C_ADDRESS, SII164_CONFIGURATION, config);
-
- return 0;
- }
-
- /* Return -1 if initialization fails. */
- return (-1);
+ /* Check if SII164 Chip exists */
+ if ((sii164GetVendorID() = SII164_VENDOR_ID) && (sii164GetDeviceID() = SII164_DEVICE_ID))
+ {
+ /*
+ * Initialize SII164 controller chip.
+ */
+
+ /* Select the edge */
+ if (edgeSelect = 0)
+ config = SII164_CONFIGURATION_LATCH_FALLING;
+ else
+ config = SII164_CONFIGURATION_LATCH_RISING;
+
+ /* Select bus wide */
+ if (busSelect = 0)
+ config |= SII164_CONFIGURATION_BUS_12BITS;
+ else
+ config |= SII164_CONFIGURATION_BUS_24BITS;
+
+ /* Select Dual/Single Edge Clock */
+ if (dualEdgeClkSelect = 0)
+ config |= SII164_CONFIGURATION_CLOCK_SINGLE;
+ else
+ config |= SII164_CONFIGURATION_CLOCK_DUAL;
+
+ /* Select HSync Enable */
+ if (hsyncEnable = 0)
+ config |= SII164_CONFIGURATION_HSYNC_FORCE_LOW;
+ else
+ config |= SII164_CONFIGURATION_HSYNC_AS_IS;
+
+ /* Select VSync Enable */
+ if (vsyncEnable = 0)
+ config |= SII164_CONFIGURATION_VSYNC_FORCE_LOW;
+ else
+ config |= SII164_CONFIGURATION_VSYNC_AS_IS;
+
+ i2cWriteReg(SII164_I2C_ADDRESS, SII164_CONFIGURATION, config);
+
+ /* De-skew enabled with default 111b value.
+ This will fix some artifacts problem in some mode on board 2.2.
+ Somehow this fix does not affect board 2.1.
+ */
+ if (deskewEnable = 0)
+ config = SII164_DESKEW_DISABLE;
+ else
+ config = SII164_DESKEW_ENABLE;
+
+ switch (deskewSetting)
+ {
+ case 0:
+ config |= SII164_DESKEW_1_STEP;
+ break;
+ case 1:
+ config |= SII164_DESKEW_2_STEP;
+ break;
+ case 2:
+ config |= SII164_DESKEW_3_STEP;
+ break;
+ case 3:
+ config |= SII164_DESKEW_4_STEP;
+ break;
+ case 4:
+ config |= SII164_DESKEW_5_STEP;
+ break;
+ case 5:
+ config |= SII164_DESKEW_6_STEP;
+ break;
+ case 6:
+ config |= SII164_DESKEW_7_STEP;
+ break;
+ case 7:
+ config |= SII164_DESKEW_8_STEP;
+ break;
+ }
+ i2cWriteReg(SII164_I2C_ADDRESS, SII164_DESKEW, config);
+
+ /* Enable/Disable Continuous Sync. */
+ if (continuousSyncEnable = 0)
+ config = SII164_PLL_FILTER_SYNC_CONTINUOUS_DISABLE;
+ else
+ config = SII164_PLL_FILTER_SYNC_CONTINUOUS_ENABLE;
+
+ /* Enable/Disable PLL Filter */
+ if (pllFilterEnable = 0)
+ config |= SII164_PLL_FILTER_DISABLE;
+ else
+ config |= SII164_PLL_FILTER_ENABLE;
+
+ /* Set the PLL Filter value */
+ config |= ((pllFilterValue & 0x07) << 1);
+
+ i2cWriteReg(SII164_I2C_ADDRESS, SII164_PLL, config);
+
+ /* Recover from Power Down and enable output. */
+ config = i2cReadReg(SII164_I2C_ADDRESS, SII164_CONFIGURATION);
+ config |= SII164_CONFIGURATION_POWER_NORMAL;
+ i2cWriteReg(SII164_I2C_ADDRESS, SII164_CONFIGURATION, config);
+
+ return 0;
+ }
+
+ /* Return -1 if initialization fails. */
+ return (-1);
}
@@ -255,9 +255,9 @@ long sii164InitChip(
*/
void sii164ResetChip(void)
{
- /* Power down */
- sii164SetPower(0);
- sii164SetPower(1);
+ /* Power down */
+ sii164SetPower(0);
+ sii164SetPower(1);
}
@@ -268,7 +268,7 @@ void sii164ResetChip(void)
*/
char *sii164GetChipString(void)
{
- return gDviCtrlChipName;
+ return gDviCtrlChipName;
}
@@ -280,26 +280,26 @@ char *sii164GetChipString(void)
* powerUp - Flag to set the power down or up
*/
void sii164SetPower(
- unsigned char powerUp
+ unsigned char powerUp
)
{
- unsigned char config;
-
- config = i2cReadReg(SII164_I2C_ADDRESS, SII164_CONFIGURATION);
- if (powerUp = 1)
- {
- /* Power up the chip */
- config &= ~SII164_CONFIGURATION_POWER_MASK;
- config |= SII164_CONFIGURATION_POWER_NORMAL;
- i2cWriteReg(SII164_I2C_ADDRESS, SII164_CONFIGURATION, config);
- }
- else
- {
- /* Power down the chip */
- config &= ~SII164_CONFIGURATION_POWER_MASK;
- config |= SII164_CONFIGURATION_POWER_DOWN;
- i2cWriteReg(SII164_I2C_ADDRESS, SII164_CONFIGURATION, config);
- }
+ unsigned char config;
+
+ config = i2cReadReg(SII164_I2C_ADDRESS, SII164_CONFIGURATION);
+ if (powerUp = 1)
+ {
+ /* Power up the chip */
+ config &= ~SII164_CONFIGURATION_POWER_MASK;
+ config |= SII164_CONFIGURATION_POWER_NORMAL;
+ i2cWriteReg(SII164_I2C_ADDRESS, SII164_CONFIGURATION, config);
+ }
+ else
+ {
+ /* Power down the chip */
+ config &= ~SII164_CONFIGURATION_POWER_MASK;
+ config |= SII164_CONFIGURATION_POWER_DOWN;
+ i2cWriteReg(SII164_I2C_ADDRESS, SII164_CONFIGURATION, config);
+ }
}
@@ -308,31 +308,31 @@ void sii164SetPower(
* This function selects the mode of the hot plug detection.
*/
static void sii164SelectHotPlugDetectionMode(
- sii164_hot_plug_mode_t hotPlugMode
+ sii164_hot_plug_mode_t hotPlugMode
)
{
- unsigned char detectReg;
-
- detectReg = i2cReadReg(SII164_I2C_ADDRESS, SII164_DETECT) & ~SII164_DETECT_MONITOR_SENSE_OUTPUT_FLAG;
- switch (hotPlugMode)
- {
- case SII164_HOTPLUG_DISABLE:
- detectReg |= SII164_DETECT_MONITOR_SENSE_OUTPUT_HIGH;
- break;
- case SII164_HOTPLUG_USE_MDI:
- detectReg &= ~SII164_DETECT_INTERRUPT_MASK;
- detectReg |= SII164_DETECT_INTERRUPT_BY_HTPLG_PIN;
- detectReg |= SII164_DETECT_MONITOR_SENSE_OUTPUT_MDI;
- break;
- case SII164_HOTPLUG_USE_RSEN:
- detectReg |= SII164_DETECT_MONITOR_SENSE_OUTPUT_RSEN;
- break;
- case SII164_HOTPLUG_USE_HTPLG:
- detectReg |= SII164_DETECT_MONITOR_SENSE_OUTPUT_HTPLG;
- break;
- }
-
- i2cWriteReg(SII164_I2C_ADDRESS, SII164_DETECT, detectReg);
+ unsigned char detectReg;
+
+ detectReg = i2cReadReg(SII164_I2C_ADDRESS, SII164_DETECT) & ~SII164_DETECT_MONITOR_SENSE_OUTPUT_FLAG;
+ switch (hotPlugMode)
+ {
+ case SII164_HOTPLUG_DISABLE:
+ detectReg |= SII164_DETECT_MONITOR_SENSE_OUTPUT_HIGH;
+ break;
+ case SII164_HOTPLUG_USE_MDI:
+ detectReg &= ~SII164_DETECT_INTERRUPT_MASK;
+ detectReg |= SII164_DETECT_INTERRUPT_BY_HTPLG_PIN;
+ detectReg |= SII164_DETECT_MONITOR_SENSE_OUTPUT_MDI;
+ break;
+ case SII164_HOTPLUG_USE_RSEN:
+ detectReg |= SII164_DETECT_MONITOR_SENSE_OUTPUT_RSEN;
+ break;
+ case SII164_HOTPLUG_USE_HTPLG:
+ detectReg |= SII164_DETECT_MONITOR_SENSE_OUTPUT_HTPLG;
+ break;
+ }
+
+ i2cWriteReg(SII164_I2C_ADDRESS, SII164_DETECT, detectReg);
}
/*
@@ -342,18 +342,18 @@ static void sii164SelectHotPlugDetectionMode(
* enableHotPlug - Enable (=1) / disable (=0) Hot Plug detection
*/
void sii164EnableHotPlugDetection(
- unsigned char enableHotPlug
+ unsigned char enableHotPlug
)
{
- unsigned char detectReg;
- detectReg = i2cReadReg(SII164_I2C_ADDRESS, SII164_DETECT);
-
- /* Depending on each DVI controller, need to enable the hot plug based on each
- individual chip design. */
- if (enableHotPlug != 0)
- sii164SelectHotPlugDetectionMode(SII164_HOTPLUG_USE_MDI);
- else
- sii164SelectHotPlugDetectionMode(SII164_HOTPLUG_DISABLE);
+ unsigned char detectReg;
+ detectReg = i2cReadReg(SII164_I2C_ADDRESS, SII164_DETECT);
+
+ /* Depending on each DVI controller, need to enable the hot plug based on each
+ individual chip design. */
+ if (enableHotPlug != 0)
+ sii164SelectHotPlugDetectionMode(SII164_HOTPLUG_USE_MDI);
+ else
+ sii164SelectHotPlugDetectionMode(SII164_HOTPLUG_DISABLE);
}
/*
@@ -366,13 +366,13 @@ void sii164EnableHotPlugDetection(
*/
unsigned char sii164IsConnected(void)
{
- unsigned char hotPlugValue;
+ unsigned char hotPlugValue;
- hotPlugValue = i2cReadReg(SII164_I2C_ADDRESS, SII164_DETECT) & SII164_DETECT_HOT_PLUG_STATUS_MASK;
- if (hotPlugValue = SII164_DETECT_HOT_PLUG_STATUS_ON)
- return 1;
- else
- return 0;
+ hotPlugValue = i2cReadReg(SII164_I2C_ADDRESS, SII164_DETECT) & SII164_DETECT_HOT_PLUG_STATUS_MASK;
+ if (hotPlugValue = SII164_DETECT_HOT_PLUG_STATUS_ON)
+ return 1;
+ else
+ return 0;
}
/*
@@ -385,13 +385,13 @@ unsigned char sii164IsConnected(void)
*/
unsigned char sii164CheckInterrupt(void)
{
- unsigned char detectReg;
+ unsigned char detectReg;
- detectReg = i2cReadReg(SII164_I2C_ADDRESS, SII164_DETECT) & SII164_DETECT_MONITOR_STATE_MASK;
- if (detectReg = SII164_DETECT_MONITOR_STATE_CHANGE)
- return 1;
- else
- return 0;
+ detectReg = i2cReadReg(SII164_I2C_ADDRESS, SII164_DETECT) & SII164_DETECT_MONITOR_STATE_MASK;
+ if (detectReg = SII164_DETECT_MONITOR_STATE_CHANGE)
+ return 1;
+ else
+ return 0;
}
/*
@@ -400,11 +400,11 @@ unsigned char sii164CheckInterrupt(void)
*/
void sii164ClearInterrupt(void)
{
- unsigned char detectReg;
+ unsigned char detectReg;
- /* Clear the MDI interrupt */
- detectReg = i2cReadReg(SII164_I2C_ADDRESS, SII164_DETECT);
- i2cWriteReg(SII164_I2C_ADDRESS, SII164_DETECT, detectReg | SII164_DETECT_MONITOR_STATE_CLEAR);
+ /* Clear the MDI interrupt */
+ detectReg = i2cReadReg(SII164_I2C_ADDRESS, SII164_DETECT);
+ i2cWriteReg(SII164_I2C_ADDRESS, SII164_DETECT, detectReg | SII164_DETECT_MONITOR_STATE_CLEAR);
}
#endif
diff --git a/drivers/staging/sm750fb/ddk750_sii164.h b/drivers/staging/sm750fb/ddk750_sii164.h
index 2b4c7d3..0996a32 100644
--- a/drivers/staging/sm750fb/ddk750_sii164.h
+++ b/drivers/staging/sm750fb/ddk750_sii164.h
@@ -6,25 +6,25 @@
/* Hot Plug detection mode structure */
typedef enum _sii164_hot_plug_mode_t
{
- SII164_HOTPLUG_DISABLE = 0, /* Disable Hot Plug output bit (always high). */
- SII164_HOTPLUG_USE_MDI, /* Use Monitor Detect Interrupt bit. */
- SII164_HOTPLUG_USE_RSEN, /* Use Receiver Sense detect bit. */
- SII164_HOTPLUG_USE_HTPLG /* Use Hot Plug detect bit. */
+ SII164_HOTPLUG_DISABLE = 0, /* Disable Hot Plug output bit (always high). */
+ SII164_HOTPLUG_USE_MDI, /* Use Monitor Detect Interrupt bit. */
+ SII164_HOTPLUG_USE_RSEN, /* Use Receiver Sense detect bit. */
+ SII164_HOTPLUG_USE_HTPLG /* Use Hot Plug detect bit. */
} sii164_hot_plug_mode_t;
/* Silicon Image SiI164 chip prototype */
long sii164InitChip(
- unsigned char edgeSelect,
- unsigned char busSelect,
- unsigned char dualEdgeClkSelect,
- unsigned char hsyncEnable,
- unsigned char vsyncEnable,
- unsigned char deskewEnable,
- unsigned char deskewSetting,
- unsigned char continuousSyncEnable,
- unsigned char pllFilterEnable,
- unsigned char pllFilterValue
+ unsigned char edgeSelect,
+ unsigned char busSelect,
+ unsigned char dualEdgeClkSelect,
+ unsigned char hsyncEnable,
+ unsigned char vsyncEnable,
+ unsigned char deskewEnable,
+ unsigned char deskewSetting,
+ unsigned char continuousSyncEnable,
+ unsigned char pllFilterEnable,
+ unsigned char pllFilterValue
);
unsigned short sii164GetVendorID(void);
diff --git a/drivers/staging/sm750fb/sm750.h b/drivers/staging/sm750fb/sm750.h
index cc80580..bf894cc 100644
--- a/drivers/staging/sm750fb/sm750.h
+++ b/drivers/staging/sm750fb/sm750.h
@@ -5,7 +5,7 @@
#define FB_ACCEL_SMI 0xab
/* please use revision id to distinguish sm750le and sm750*/
-#define SPC_SM750 0
+#define SPC_SM750 0
#define MB(x) ((x)<<20)
#define MHZ(x) ((x) * 1000000)
@@ -38,8 +38,8 @@ struct lynx_accel{
};
-/* lynx_share stands for a presentation of two frame buffer
- that use one smi adaptor , it is similar to a basic class of C++
+/* lynx_share stands for a presentation of two frame buffer
+ that use one smi adaptor , it is similar to a basic class of C++
*/
struct lynx_share{
/* common members */
@@ -126,17 +126,17 @@ struct lynxfb_crtc{
struct lynxfb_output{
int dpms;
int paths;
- /* which paths(s) this output stands for,for sm750:
- paths=1:means output for panel paths
- paths=2:means output for crt paths
- paths=3:means output for both panel and crt paths
+ /* which paths(s) this output stands for,for sm750:
+ paths=1:means output for panel paths
+ paths=2:means output for crt paths
+ paths=3:means output for both panel and crt paths
*/
int *channel;
- /* which channel these outputs linked with,for sm750:
- *channel=0 means primary channel
- *channel=1 means secondary channel
- output->channel => &crtc->channel
+ /* which channel these outputs linked with,for sm750:
+ *channel=0 means primary channel
+ *channel=1 means secondary channel
+ output->channel => &crtc->channel
*/
void *priv;
@@ -165,7 +165,7 @@ struct lynxfb_par{
#define PS_TO_HZ(ps) \
- ({ \
+ ({ \
unsigned long long hz = 1000*1000*1000*1000ULL; \
do_div(hz, ps); \
(unsigned long)hz;})
diff --git a/drivers/staging/sm750fb/sm750_accel.c b/drivers/staging/sm750fb/sm750_accel.c
index 6eee4cd..668258c 100644
--- a/drivers/staging/sm750fb/sm750_accel.c
+++ b/drivers/staging/sm750fb/sm750_accel.c
@@ -151,97 +151,97 @@ unsigned int width,
unsigned int height, /* width and height of rectangle in pixel value */
unsigned int rop2) /* ROP value */
{
- unsigned int nDirection, de_ctrl;
- int opSign;
- nDirection = LEFT_TO_RIGHT;
+ unsigned int nDirection, de_ctrl;
+ int opSign;
+ nDirection = LEFT_TO_RIGHT;
/* Direction of ROP2 operation: 1 = Left to Right, (-1) = Right to Left */
- opSign = 1;
- de_ctrl = 0;
-
- /* If source and destination are the same surface, need to check for overlay cases */
- if (sBase = dBase && sPitch = dPitch)
- {
- /* Determine direction of operation */
- if (sy < dy)
- {
- /* +----------+
- |S |
- | +----------+
- | | | |
- | | | |
- +---|------+ |
- | D|
- +----------+ */
-
- nDirection = BOTTOM_TO_TOP;
- }
- else if (sy > dy)
- {
- /* +----------+
- |D |
- | +----------+
- | | | |
- | | | |
- +---|------+ |
- | S|
- +----------+ */
-
- nDirection = TOP_TO_BOTTOM;
- }
- else
- {
- /* sy = dy */
-
- if (sx <= dx)
- {
- /* +------+---+------+
- |S | | D|
- | | | |
- | | | |
- | | | |
- +------+---+------+ */
-
- nDirection = RIGHT_TO_LEFT;
- }
- else
- {
- /* sx > dx */
-
- /* +------+---+------+
- |D | | S|
- | | | |
- | | | |
- | | | |
- +------+---+------+ */
-
- nDirection = LEFT_TO_RIGHT;
- }
- }
- }
-
- if ((nDirection = BOTTOM_TO_TOP) || (nDirection = RIGHT_TO_LEFT))
- {
- sx += width - 1;
- sy += height - 1;
- dx += width - 1;
- dy += height - 1;
- opSign = (-1);
- }
-
- /* Note:
- DE_FOREGROUND are DE_BACKGROUND are don't care.
- DE_COLOR_COMPARE and DE_COLOR_COMPARE_MAKS are set by set deSetTransparency().
- */
+ opSign = 1;
+ de_ctrl = 0;
- /* 2D Source Base.
- It is an address offset (128 bit aligned) from the beginning of frame buffer.
- */
- write_dpr(accel, DE_WINDOW_SOURCE_BASE, sBase); /* dpr40 */
+ /* If source and destination are the same surface, need to check for overlay cases */
+ if (sBase = dBase && sPitch = dPitch)
+ {
+ /* Determine direction of operation */
+ if (sy < dy)
+ {
+ /* +----------+
+ |S |
+ | +----------+
+ | | | |
+ | | | |
+ +---|------+ |
+ | D|
+ +----------+ */
+
+ nDirection = BOTTOM_TO_TOP;
+ }
+ else if (sy > dy)
+ {
+ /* +----------+
+ |D |
+ | +----------+
+ | | | |
+ | | | |
+ +---|------+ |
+ | S|
+ +----------+ */
+
+ nDirection = TOP_TO_BOTTOM;
+ }
+ else
+ {
+ /* sy = dy */
+
+ if (sx <= dx)
+ {
+ /* +------+---+------+
+ |S | | D|
+ | | | |
+ | | | |
+ | | | |
+ +------+---+------+ */
+
+ nDirection = RIGHT_TO_LEFT;
+ }
+ else
+ {
+ /* sx > dx */
+
+ /* +------+---+------+
+ |D | | S|
+ | | | |
+ | | | |
+ | | | |
+ +------+---+------+ */
+
+ nDirection = LEFT_TO_RIGHT;
+ }
+ }
+ }
- /* 2D Destination Base.
- It is an address offset (128 bit aligned) from the beginning of frame buffer.
- */
- write_dpr(accel, DE_WINDOW_DESTINATION_BASE, dBase); /* dpr44 */
+ if ((nDirection = BOTTOM_TO_TOP) || (nDirection = RIGHT_TO_LEFT))
+ {
+ sx += width - 1;
+ sy += height - 1;
+ dx += width - 1;
+ dy += height - 1;
+ opSign = (-1);
+ }
+
+ /* Note:
+ DE_FOREGROUND are DE_BACKGROUND are don't care.
+ DE_COLOR_COMPARE and DE_COLOR_COMPARE_MAKS are set by set deSetTransparency().
+ */
+
+ /* 2D Source Base.
+ It is an address offset (128 bit aligned) from the beginning of frame buffer.
+ */
+ write_dpr(accel, DE_WINDOW_SOURCE_BASE, sBase); /* dpr40 */
+
+ /* 2D Destination Base.
+ It is an address offset (128 bit aligned) from the beginning of frame buffer.
+ */
+ write_dpr(accel, DE_WINDOW_DESTINATION_BASE, dBase); /* dpr44 */
#if 0
/* Program pitch (distance between the 1st points of two adjacent lines).
@@ -267,54 +267,54 @@ unsigned int rop2) /* ROP value */
/* Screen Window width in Pixels.
2D engine uses this value to calculate the linear address in frame buffer for a given point.
*/
- write_dpr(accel, DE_WINDOW_WIDTH,
- FIELD_VALUE(0, DE_WINDOW_WIDTH, DESTINATION, (dPitch/Bpp)) |
- FIELD_VALUE(0, DE_WINDOW_WIDTH, SOURCE, (sPitch/Bpp))); /* dpr3c */
+ write_dpr(accel, DE_WINDOW_WIDTH,
+ FIELD_VALUE(0, DE_WINDOW_WIDTH, DESTINATION, (dPitch/Bpp)) |
+ FIELD_VALUE(0, DE_WINDOW_WIDTH, SOURCE, (sPitch/Bpp))); /* dpr3c */
if (accel->de_wait() != 0){
return -1;
}
- {
-
- write_dpr(accel, DE_SOURCE,
- FIELD_SET (0, DE_SOURCE, WRAP, DISABLE) |
- FIELD_VALUE(0, DE_SOURCE, X_K1, sx) |
- FIELD_VALUE(0, DE_SOURCE, Y_K2, sy)); /* dpr0 */
- write_dpr(accel, DE_DESTINATION,
- FIELD_SET (0, DE_DESTINATION, WRAP, DISABLE) |
- FIELD_VALUE(0, DE_DESTINATION, X, dx) |
- FIELD_VALUE(0, DE_DESTINATION, Y, dy)); /* dpr04 */
- write_dpr(accel, DE_DIMENSION,
- FIELD_VALUE(0, DE_DIMENSION, X, width) |
- FIELD_VALUE(0, DE_DIMENSION, Y_ET, height)); /* dpr08 */
-
- de_ctrl - FIELD_VALUE(0, DE_CONTROL, ROP, rop2) |
- FIELD_SET(0, DE_CONTROL, ROP_SELECT, ROP2) |
- FIELD_SET(0, DE_CONTROL, COMMAND, BITBLT) |
- ((nDirection = RIGHT_TO_LEFT) ?
- FIELD_SET(0, DE_CONTROL, DIRECTION, RIGHT_TO_LEFT)
- : FIELD_SET(0, DE_CONTROL, DIRECTION, LEFT_TO_RIGHT)) |
- FIELD_SET(0, DE_CONTROL, STATUS, START);
- write_dpr(accel, DE_CONTROL, de_ctrl); /* dpr0c */
- }
-
- return 0;
+ {
+
+ write_dpr(accel, DE_SOURCE,
+ FIELD_SET (0, DE_SOURCE, WRAP, DISABLE) |
+ FIELD_VALUE(0, DE_SOURCE, X_K1, sx) |
+ FIELD_VALUE(0, DE_SOURCE, Y_K2, sy)); /* dpr0 */
+ write_dpr(accel, DE_DESTINATION,
+ FIELD_SET (0, DE_DESTINATION, WRAP, DISABLE) |
+ FIELD_VALUE(0, DE_DESTINATION, X, dx) |
+ FIELD_VALUE(0, DE_DESTINATION, Y, dy)); /* dpr04 */
+ write_dpr(accel, DE_DIMENSION,
+ FIELD_VALUE(0, DE_DIMENSION, X, width) |
+ FIELD_VALUE(0, DE_DIMENSION, Y_ET, height)); /* dpr08 */
+
+ de_ctrl = FIELD_VALUE(0, DE_CONTROL, ROP, rop2) |
+ FIELD_SET(0, DE_CONTROL, ROP_SELECT, ROP2) |
+ FIELD_SET(0, DE_CONTROL, COMMAND, BITBLT) |
+ ((nDirection = RIGHT_TO_LEFT) ?
+ FIELD_SET(0, DE_CONTROL, DIRECTION, RIGHT_TO_LEFT)
+ : FIELD_SET(0, DE_CONTROL, DIRECTION, LEFT_TO_RIGHT)) |
+ FIELD_SET(0, DE_CONTROL, STATUS, START);
+ write_dpr(accel, DE_CONTROL, de_ctrl); /* dpr0c */
+
+ }
+
+ return 0;
}
static unsigned int deGetTransparency(struct lynx_accel *accel)
{
- unsigned int de_ctrl;
+ unsigned int de_ctrl;
- de_ctrl = read_dpr(accel, DE_CONTROL);
+ de_ctrl = read_dpr(accel, DE_CONTROL);
- de_ctrl &- FIELD_MASK(DE_CONTROL_TRANSPARENCY_MATCH) |
- FIELD_MASK(DE_CONTROL_TRANSPARENCY_SELECT)|
- FIELD_MASK(DE_CONTROL_TRANSPARENCY);
+ de_ctrl &+ FIELD_MASK(DE_CONTROL_TRANSPARENCY_MATCH) |
+ FIELD_MASK(DE_CONTROL_TRANSPARENCY_SELECT)|
+ FIELD_MASK(DE_CONTROL_TRANSPARENCY);
- return de_ctrl;
+ return de_ctrl;
}
int hw_imageblit(struct lynx_accel *accel,
@@ -332,32 +332,32 @@ int hw_imageblit(struct lynx_accel *accel,
u32 bColor, /* Background color (corresponding to a 0 in the monochrome data */
u32 rop2) /* ROP value */
{
- unsigned int ulBytesPerScan;
- unsigned int ul4BytesPerScan;
- unsigned int ulBytesRemain;
- unsigned int de_ctrl = 0;
- unsigned char ajRemain[4];
- int i, j;
-
- startBit &= 7; /* Just make sure the start bit is within legal range */
- ulBytesPerScan = (width + startBit + 7) / 8;
- ul4BytesPerScan = ulBytesPerScan & ~3;
- ulBytesRemain = ulBytesPerScan & 3;
+ unsigned int ulBytesPerScan;
+ unsigned int ul4BytesPerScan;
+ unsigned int ulBytesRemain;
+ unsigned int de_ctrl = 0;
+ unsigned char ajRemain[4];
+ int i, j;
+
+ startBit &= 7; /* Just make sure the start bit is within legal range */
+ ulBytesPerScan = (width + startBit + 7) / 8;
+ ul4BytesPerScan = ulBytesPerScan & ~3;
+ ulBytesRemain = ulBytesPerScan & 3;
if(accel->de_wait() != 0)
- {
- return -1;
- }
+ {
+ return -1;
+ }
- /* 2D Source Base.
- Use 0 for HOST Blt.
- */
- write_dpr(accel, DE_WINDOW_SOURCE_BASE, 0);
+ /* 2D Source Base.
+ Use 0 for HOST Blt.
+ */
+ write_dpr(accel, DE_WINDOW_SOURCE_BASE, 0);
- /* 2D Destination Base.
- It is an address offset (128 bit aligned) from the beginning of frame buffer.
- */
- write_dpr(accel, DE_WINDOW_DESTINATION_BASE, dBase);
+ /* 2D Destination Base.
+ It is an address offset (128 bit aligned) from the beginning of frame buffer.
+ */
+ write_dpr(accel, DE_WINDOW_DESTINATION_BASE, dBase);
#if 0
/* Program pitch (distance between the 1st points of two adjacent lines).
Note that input pitch is BYTE value, but the 2D Pitch register uses
@@ -380,30 +380,30 @@ int hw_imageblit(struct lynx_accel *accel,
FIELD_VALUE(0, DE_PITCH, SOURCE, dPitch/bytePerPixel)); /* dpr10 */
}
- /* Screen Window width in Pixels.
- 2D engine uses this value to calculate the linear address in frame buffer for a given point.
- */
- write_dpr(accel, DE_WINDOW_WIDTH,
- FIELD_VALUE(0, DE_WINDOW_WIDTH, DESTINATION, (dPitch/bytePerPixel)) |
- FIELD_VALUE(0, DE_WINDOW_WIDTH, SOURCE, (dPitch/bytePerPixel)));
+ /* Screen Window width in Pixels.
+ 2D engine uses this value to calculate the linear address in frame buffer for a given point.
+ */
+ write_dpr(accel, DE_WINDOW_WIDTH,
+ FIELD_VALUE(0, DE_WINDOW_WIDTH, DESTINATION, (dPitch/bytePerPixel)) |
+ FIELD_VALUE(0, DE_WINDOW_WIDTH, SOURCE, (dPitch/bytePerPixel)));
- /* Note: For 2D Source in Host Write, only X_K1_MONO field is needed, and Y_K2 field is not used.
- For mono bitmap, use startBit for X_K1. */
- write_dpr(accel, DE_SOURCE,
- FIELD_SET (0, DE_SOURCE, WRAP, DISABLE) |
- FIELD_VALUE(0, DE_SOURCE, X_K1_MONO, startBit)); /* dpr00 */
+ /* Note: For 2D Source in Host Write, only X_K1_MONO field is needed, and Y_K2 field is not used.
+ For mono bitmap, use startBit for X_K1. */
+ write_dpr(accel, DE_SOURCE,
+ FIELD_SET (0, DE_SOURCE, WRAP, DISABLE) |
+ FIELD_VALUE(0, DE_SOURCE, X_K1_MONO, startBit)); /* dpr00 */
- write_dpr(accel, DE_DESTINATION,
- FIELD_SET (0, DE_DESTINATION, WRAP, DISABLE) |
- FIELD_VALUE(0, DE_DESTINATION, X, dx) |
- FIELD_VALUE(0, DE_DESTINATION, Y, dy)); /* dpr04 */
+ write_dpr(accel, DE_DESTINATION,
+ FIELD_SET (0, DE_DESTINATION, WRAP, DISABLE) |
+ FIELD_VALUE(0, DE_DESTINATION, X, dx) |
+ FIELD_VALUE(0, DE_DESTINATION, Y, dy)); /* dpr04 */
- write_dpr(accel, DE_DIMENSION,
- FIELD_VALUE(0, DE_DIMENSION, X, width) |
- FIELD_VALUE(0, DE_DIMENSION, Y_ET, height)); /* dpr08 */
+ write_dpr(accel, DE_DIMENSION,
+ FIELD_VALUE(0, DE_DIMENSION, X, width) |
+ FIELD_VALUE(0, DE_DIMENSION, Y_ET, height)); /* dpr08 */
- write_dpr(accel, DE_FOREGROUND, fColor);
- write_dpr(accel, DE_BACKGROUND, bColor);
+ write_dpr(accel, DE_FOREGROUND, fColor);
+ write_dpr(accel, DE_BACKGROUND, bColor);
de_ctrl = FIELD_VALUE(0, DE_CONTROL, ROP, rop2) |
FIELD_SET(0, DE_CONTROL, ROP_SELECT, ROP2) |
@@ -413,24 +413,24 @@ int hw_imageblit(struct lynx_accel *accel,
write_dpr(accel, DE_CONTROL, de_ctrl | deGetTransparency(accel));
- /* Write MONO data (line by line) to 2D Engine data port */
- for (i=0; i<height; i++)
- {
- /* For each line, send the data in chunks of 4 bytes */
- for (j=0; j<(ul4BytesPerScan/4); j++)
- {
- write_dpPort(accel, *(unsigned int *)(pSrcbuf + (j * 4)));
- }
-
- if (ulBytesRemain)
- {
- memcpy(ajRemain, pSrcbuf+ul4BytesPerScan, ulBytesRemain);
- write_dpPort(accel, *(unsigned int *)ajRemain);
- }
-
- pSrcbuf += srcDelta;
- }
-
- return 0;
+ /* Write MONO data (line by line) to 2D Engine data port */
+ for (i=0; i<height; i++)
+ {
+ /* For each line, send the data in chunks of 4 bytes */
+ for (j=0; j<(ul4BytesPerScan/4); j++)
+ {
+ write_dpPort(accel, *(unsigned int *)(pSrcbuf + (j * 4)));
+ }
+
+ if (ulBytesRemain)
+ {
+ memcpy(ajRemain, pSrcbuf+ul4BytesPerScan, ulBytesRemain);
+ write_dpPort(accel, *(unsigned int *)ajRemain);
+ }
+
+ pSrcbuf += srcDelta;
+ }
+
+ return 0;
}
diff --git a/drivers/staging/sm750fb/sm750_accel.h b/drivers/staging/sm750fb/sm750_accel.h
index d3d256c..f252e47 100644
--- a/drivers/staging/sm750fb/sm750_accel.h
+++ b/drivers/staging/sm750fb/sm750_accel.h
@@ -7,7 +7,7 @@
/* notes: below address are the offset value from de_base_address (0x100000)*/
/* for sm718/750/502 de_base is at mmreg_1mb*/
-#define DE_BASE_ADDR_TYPE1 0x100000
+#define DE_BASE_ADDR_TYPE1 0x100000
/* for sm712,de_base is at mmreg_32kb */
#define DE_BASE_ADDR_TYPE2 0x8000
/* for sm722,de_base is at mmreg_0 */
@@ -26,7 +26,7 @@
#define DE_SOURCE_WRAP_ENABLE 1
#define DE_SOURCE_X_K1 29:16
#define DE_SOURCE_Y_K2 15:0
-#define DE_SOURCE_X_K1_MONO 20:16
+#define DE_SOURCE_X_K1_MONO 20:16
#define DE_DESTINATION 0x4
#define DE_DESTINATION_WRAP 31:31
diff --git a/drivers/staging/sm750fb/sm750_help.h b/drivers/staging/sm750fb/sm750_help.h
index 05777f7..8ba4f8d 100644
--- a/drivers/staging/sm750fb/sm750_help.h
+++ b/drivers/staging/sm750fb/sm750_help.h
@@ -11,9 +11,9 @@
#define GET_FIELD(d, f) (((d) >> _LSB(f)) & RAW_MASK(f))
#define TEST_FIELD(d, f, v) (GET_FIELD(d, f) = f ## _ ## v)
#define SET_FIELD(d, f, v) (((d) & ~GET_MASK(f)) | \
- (((f ## _ ## v) & RAW_MASK(f)) << _LSB(f)))
+ (((f ## _ ## v) & RAW_MASK(f)) << _LSB(f)))
#define SET_FIELDV(d, f, v) (((d) & ~GET_MASK(f)) | \
- (((v) & RAW_MASK(f)) << _LSB(f)))
+ (((v) & RAW_MASK(f)) << _LSB(f)))
/* Internal macros */
#define _F_START(f) (0 ? f)
@@ -26,24 +26,24 @@
/* Global macros */
#define FIELD_GET(x, reg, field) \
( \
- _F_NORMALIZE((x), reg ## _ ## field) \
+ _F_NORMALIZE((x), reg ## _ ## field) \
)
#define FIELD_SET(x, reg, field, value) \
( \
- (x & ~_F_MASK(reg ## _ ## field)) \
- | _F_DENORMALIZE(reg ## _ ## field ## _ ## value, reg ## _ ## field) \
+ (x & ~_F_MASK(reg ## _ ## field)) \
+ | _F_DENORMALIZE(reg ## _ ## field ## _ ## value, reg ## _ ## field) \
)
#define FIELD_VALUE(x, reg, field, value) \
( \
- (x & ~_F_MASK(reg ## _ ## field)) \
- | _F_DENORMALIZE(value, reg ## _ ## field) \
+ (x & ~_F_MASK(reg ## _ ## field)) \
+ | _F_DENORMALIZE(value, reg ## _ ## field) \
)
#define FIELD_CLEAR(reg, field) \
( \
- ~ _F_MASK(reg ## _ ## field) \
+ ~ _F_MASK(reg ## _ ## field) \
)
/* Field Macros */
@@ -55,20 +55,20 @@
#define FIELD_DENORMALIZE(field, value) (((value) << FIELD_START(field)) & FIELD_MASK(field))
#define FIELD_INIT(reg, field, value) FIELD_DENORMALIZE(reg ## _ ## field, \
- reg ## _ ## field ## _ ## value)
+ reg ## _ ## field ## _ ## value)
#define FIELD_INIT_VAL(reg, field, value) \
- (FIELD_DENORMALIZE(reg ## _ ## field, value))
+ (FIELD_DENORMALIZE(reg ## _ ## field, value))
#define FIELD_VAL_SET(x, r, f, v) x = x & ~FIELD_MASK(r ## _ ## f) \
- | FIELD_DENORMALIZE(r ## _ ## f, r ## _ ## f ## _ ## v)
+ | FIELD_DENORMALIZE(r ## _ ## f, r ## _ ## f ## _ ## v)
#define RGB(r, g, b) \
( \
- (unsigned long) (((r) << 16) | ((g) << 8) | (b)) \
+ (unsigned long) (((r) << 16) | ((g) << 8) | (b)) \
)
#define RGB16(r, g, b) \
( \
- (unsigned short) ((((r) & 0xF8) << 8) | (((g) & 0xFC) << 3) | (((b) & 0xF8) >> 3)) \
+ (unsigned short) ((((r) & 0xF8) << 8) | (((g) & 0xFC) << 3) | (((b) & 0xF8) >> 3)) \
)
static inline unsigned int absDiff(unsigned int a, unsigned int b)
diff --git a/drivers/staging/sm750fb/sm750_hw.c b/drivers/staging/sm750fb/sm750_hw.c
index 84381bc..28db9c7 100644
--- a/drivers/staging/sm750fb/sm750_hw.c
+++ b/drivers/staging/sm750fb/sm750_hw.c
@@ -171,23 +171,23 @@ int hw_sm750_inithw(struct lynx_share *share, struct pci_dev *pdev)
/* Set up GPIO for software I2C to program DVI chip in the
Xilinx SP605 board, in order to have video signal.
*/
- swI2CInit(0, 1);
+ swI2CInit(0, 1);
- /* Customer may NOT use CH7301 DVI chip, which has to be
- initialized differently.
- */
- if (swI2CReadReg(0xec, 0x4a) = 0x95)
- {
- /* The following register values for CH7301 are from
- Chrontel app note and our experiment.
- */
+ /* Customer may NOT use CH7301 DVI chip, which has to be
+ initialized differently.
+ */
+ if (swI2CReadReg(0xec, 0x4a) = 0x95)
+ {
+ /* The following register values for CH7301 are from
+ Chrontel app note and our experiment.
+ */
pr_info("yes,CH7301 DVI chip found\n");
- swI2CWriteReg(0xec, 0x1d, 0x16);
- swI2CWriteReg(0xec, 0x21, 0x9);
- swI2CWriteReg(0xec, 0x49, 0xC0);
+ swI2CWriteReg(0xec, 0x1d, 0x16);
+ swI2CWriteReg(0xec, 0x21, 0x9);
+ swI2CWriteReg(0xec, 0x49, 0xC0);
pr_info("okay,CH7301 DVI chip setup done\n");
- }
+ }
}
/* init 2d engine */
@@ -612,28 +612,28 @@ int hw_sm750_deWait(void)
}
int hw_sm750_pan_display(struct lynxfb_crtc *crtc,
- const struct fb_var_screeninfo *var,
- const struct fb_info *info)
+ const struct fb_var_screeninfo *var,
+ const struct fb_info *info)
{
- uint32_t total;
- /* check params */
- if ((var->xoffset + var->xres > var->xres_virtual) ||
- (var->yoffset + var->yres > var->yres_virtual)) {
- return -EINVAL;
- }
-
- total = var->yoffset * info->fix.line_length +
- ((var->xoffset * var->bits_per_pixel) >> 3);
- total += crtc->oScreen;
- if (crtc->channel = sm750_primary) {
- POKE32(PANEL_FB_ADDRESS,
- FIELD_VALUE(PEEK32(PANEL_FB_ADDRESS),
- PANEL_FB_ADDRESS, ADDRESS, total));
- } else {
- POKE32(CRT_FB_ADDRESS,
- FIELD_VALUE(PEEK32(CRT_FB_ADDRESS),
- CRT_FB_ADDRESS, ADDRESS, total));
- }
- return 0;
+ uint32_t total;
+ /* check params */
+ if ((var->xoffset + var->xres > var->xres_virtual) ||
+ (var->yoffset + var->yres > var->yres_virtual)) {
+ return -EINVAL;
+ }
+
+ total = var->yoffset * info->fix.line_length +
+ ((var->xoffset * var->bits_per_pixel) >> 3);
+ total += crtc->oScreen;
+ if (crtc->channel = sm750_primary) {
+ POKE32(PANEL_FB_ADDRESS,
+ FIELD_VALUE(PEEK32(PANEL_FB_ADDRESS),
+ PANEL_FB_ADDRESS, ADDRESS, total));
+ } else {
+ POKE32(CRT_FB_ADDRESS,
+ FIELD_VALUE(PEEK32(CRT_FB_ADDRESS),
+ CRT_FB_ADDRESS, ADDRESS, total));
+ }
+ return 0;
}
diff --git a/drivers/staging/sm750fb/sm750_hw.h b/drivers/staging/sm750fb/sm750_hw.h
index 93288b3..adc61edf 100644
--- a/drivers/staging/sm750fb/sm750_hw.h
+++ b/drivers/staging/sm750fb/sm750_hw.h
@@ -2,8 +2,8 @@
#define LYNX_HW750_H__
-#define DEFAULT_SM750_CHIP_CLOCK 290
-#define DEFAULT_SM750LE_CHIP_CLOCK 333
+#define DEFAULT_SM750_CHIP_CLOCK 290
+#define DEFAULT_SM750LE_CHIP_CLOCK 333
#ifndef SM750LE_REVISION_ID
#define SM750LE_REVISION_ID (unsigned char)0xfe
#endif
@@ -24,9 +24,9 @@ enum sm750_dataflow{
sm750_simul_sec,/* secondary => all head */
- sm750_dual_normal,/* primary => panel head and secondary => crt */
+ sm750_dual_normal,/* primary => panel head and secondary => crt */
- sm750_dual_swap,/* primary => crt head and secondary => panel */
+ sm750_dual_swap,/* primary => crt head and secondary => panel */
};
@@ -61,20 +61,20 @@ struct sm750_state{
int yLCD;
};
-/* sm750_share stands for a presentation of two frame buffer
- that use one sm750 adaptor, it is similar to the super class of lynx_share
- in C++
-*/
+/* sm750_share stands for a presentation of two frame buffer
+ that use one sm750 adaptor, it is similar to the super class of lynx_share
+ in C++
+ */
struct sm750_share{
/* it's better to put lynx_share struct to the first place of sm750_share */
struct lynx_share share;
struct sm750_state state;
int hwCursor;
- /* 0: no hardware cursor
- 1: primary crtc hw cursor enabled,
- 2: secondary crtc hw cursor enabled
- 3: both ctrc hw cursor enabled
+ /* 0: no hardware cursor
+ 1: primary crtc hw cursor enabled,
+ 2: secondary crtc hw cursor enabled
+ 3: both ctrc hw cursor enabled
*/
};
@@ -95,7 +95,7 @@ int hw_sm750le_setBLANK(struct lynxfb_output*, int);
void hw_sm750_crtc_clear(struct lynxfb_crtc*);
void hw_sm750_output_clear(struct lynxfb_output*);
int hw_sm750_pan_display(struct lynxfb_crtc *crtc,
- const struct fb_var_screeninfo *var,
- const struct fb_info *info);
+ const struct fb_var_screeninfo *var,
+ const struct fb_info *info);
#endif
--
2.4.4
^ permalink raw reply related [flat|nested] 31+ messages in thread* [PATCH v3 02/19] staging: sm750fb: remove spacing after open parenthesis
2015-06-24 16:20 [PATCH v3 00/19] staging: sm750fb: checkpatch.pl fixes Juston Li
2015-06-24 16:25 ` [PATCH v3 01/19] staging: sm750fb: use tabs for indentation Juston Li
@ 2015-06-24 16:25 ` Juston Li
2015-06-24 16:25 ` [PATCH v3 03/19] staging: sm750fb: remove space before close parenthesis Juston Li
` (16 subsequent siblings)
18 siblings, 0 replies; 31+ messages in thread
From: Juston Li @ 2015-06-24 16:25 UTC (permalink / raw)
To: sudipm.mukherjee, teddy.wang, gregkh, linux-fbdev, devel,
linux-kernel, dan.carpenter
Cc: Juston Li
fixes checkpatch.pl warning:
ERROR: space prohibited after that open parenthesis '('
Signed-off-by: Juston Li <juston.h.li@gmail.com>
---
drivers/staging/sm750fb/ddk750_chip.c | 6 +++---
drivers/staging/sm750fb/ddk750_mode.c | 2 +-
drivers/staging/sm750fb/ddk750_power.c | 8 ++++----
drivers/staging/sm750fb/sm750_help.h | 2 +-
4 files changed, 9 insertions(+), 9 deletions(-)
diff --git a/drivers/staging/sm750fb/ddk750_chip.c b/drivers/staging/sm750fb/ddk750_chip.c
index f4975d2..1069a2d 100644
--- a/drivers/staging/sm750fb/ddk750_chip.c
+++ b/drivers/staging/sm750fb/ddk750_chip.c
@@ -599,9 +599,9 @@ unsigned int formatPllReg(pll_value_t *pPLL)
On returning a 32 bit number, the value can be applied to any PLL in the calling function.
*/
ulPllReg - FIELD_SET( 0, PANEL_PLL_CTRL, BYPASS, OFF)
- | FIELD_SET( 0, PANEL_PLL_CTRL, POWER, ON)
- | FIELD_SET( 0, PANEL_PLL_CTRL, INPUT, OSC)
+ FIELD_SET(0, PANEL_PLL_CTRL, BYPASS, OFF)
+ | FIELD_SET(0, PANEL_PLL_CTRL, POWER, ON)
+ | FIELD_SET(0, PANEL_PLL_CTRL, INPUT, OSC)
#ifndef VALIDATION_CHIP
| FIELD_VALUE(0, PANEL_PLL_CTRL, POD, pPLL->POD)
#endif
diff --git a/drivers/staging/sm750fb/ddk750_mode.c b/drivers/staging/sm750fb/ddk750_mode.c
index 1f93d07..31424b2 100644
--- a/drivers/staging/sm750fb/ddk750_mode.c
+++ b/drivers/staging/sm750fb/ddk750_mode.c
@@ -43,7 +43,7 @@ static unsigned long displayControlAdjust_SM750LE(mode_parameter_t *pModeParam,
/* Set bit 29:27 of display control register for the right clock */
/* Note that SM750LE only need to supported 7 resoluitons. */
- if ( x = 800 && y = 600 )
+ if (x = 800 && y = 600 )
dispControl = FIELD_SET(dispControl, CRT_DISPLAY_CTRL, CLK, PLL41);
else if (x = 1024 && y = 768)
dispControl = FIELD_SET(dispControl, CRT_DISPLAY_CTRL, CLK, PLL65);
diff --git a/drivers/staging/sm750fb/ddk750_power.c b/drivers/staging/sm750fb/ddk750_power.c
index b7a108b..44b8eb1 100644
--- a/drivers/staging/sm750fb/ddk750_power.c
+++ b/drivers/staging/sm750fb/ddk750_power.c
@@ -59,17 +59,17 @@ void setPowerMode(unsigned int powerMode)
{
control_value #ifdef VALIDATION_CHIP
- FIELD_SET( control_value, POWER_MODE_CTRL, 336CLK, OFF) |
+ FIELD_SET(control_value, POWER_MODE_CTRL, 336CLK, OFF) |
#endif
- FIELD_SET( control_value, POWER_MODE_CTRL, OSC_INPUT, OFF);
+ FIELD_SET(control_value, POWER_MODE_CTRL, OSC_INPUT, OFF);
}
else
{
control_value #ifdef VALIDATION_CHIP
- FIELD_SET( control_value, POWER_MODE_CTRL, 336CLK, ON) |
+ FIELD_SET(control_value, POWER_MODE_CTRL, 336CLK, ON) |
#endif
- FIELD_SET( control_value, POWER_MODE_CTRL, OSC_INPUT, ON);
+ FIELD_SET(control_value, POWER_MODE_CTRL, OSC_INPUT, ON);
}
/* Program new power mode. */
diff --git a/drivers/staging/sm750fb/sm750_help.h b/drivers/staging/sm750fb/sm750_help.h
index 8ba4f8d..ac0744e 100644
--- a/drivers/staging/sm750fb/sm750_help.h
+++ b/drivers/staging/sm750fb/sm750_help.h
@@ -43,7 +43,7 @@
#define FIELD_CLEAR(reg, field) \
( \
- ~ _F_MASK(reg ## _ ## field) \
+ ~_F_MASK(reg ## _ ## field) \
)
/* Field Macros */
--
2.4.4
^ permalink raw reply related [flat|nested] 31+ messages in thread* [PATCH v3 03/19] staging: sm750fb: remove space before close parenthesis
2015-06-24 16:20 [PATCH v3 00/19] staging: sm750fb: checkpatch.pl fixes Juston Li
2015-06-24 16:25 ` [PATCH v3 01/19] staging: sm750fb: use tabs for indentation Juston Li
2015-06-24 16:25 ` [PATCH v3 02/19] staging: sm750fb: remove spacing after open parenthesis Juston Li
@ 2015-06-24 16:25 ` Juston Li
2015-06-24 16:25 ` [PATCH v3 04/19] staging: sm750fb: add space before open parenthesis Juston Li
` (15 subsequent siblings)
18 siblings, 0 replies; 31+ messages in thread
From: Juston Li @ 2015-06-24 16:25 UTC (permalink / raw)
To: sudipm.mukherjee, teddy.wang, gregkh, linux-fbdev, devel,
linux-kernel, dan.carpenter
Cc: Juston Li
fixes checkpatch.pl error:
ERROR: space prohibited before that close parenthesis ')'
Signed-off-by: Juston Li <juston.h.li@gmail.com>
---
drivers/staging/sm750fb/ddk750_chip.c | 2 +-
drivers/staging/sm750fb/ddk750_mode.c | 2 +-
drivers/staging/sm750fb/sm750_accel.c | 2 +-
3 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/staging/sm750fb/ddk750_chip.c b/drivers/staging/sm750fb/ddk750_chip.c
index 1069a2d..fb1c533 100644
--- a/drivers/staging/sm750fb/ddk750_chip.c
+++ b/drivers/staging/sm750fb/ddk750_chip.c
@@ -268,7 +268,7 @@ int ddk750_initHw(initchip_param_t *pInitParam)
#endif
- if (pInitParam->powerMode != 0 )
+ if (pInitParam->powerMode != 0)
pInitParam->powerMode = 0;
setPowerMode(pInitParam->powerMode);
diff --git a/drivers/staging/sm750fb/ddk750_mode.c b/drivers/staging/sm750fb/ddk750_mode.c
index 31424b2..4ee9ceb 100644
--- a/drivers/staging/sm750fb/ddk750_mode.c
+++ b/drivers/staging/sm750fb/ddk750_mode.c
@@ -43,7 +43,7 @@ static unsigned long displayControlAdjust_SM750LE(mode_parameter_t *pModeParam,
/* Set bit 29:27 of display control register for the right clock */
/* Note that SM750LE only need to supported 7 resoluitons. */
- if (x = 800 && y = 600 )
+ if (x = 800 && y = 600)
dispControl = FIELD_SET(dispControl, CRT_DISPLAY_CTRL, CLK, PLL41);
else if (x = 1024 && y = 768)
dispControl = FIELD_SET(dispControl, CRT_DISPLAY_CTRL, CLK, PLL65);
diff --git a/drivers/staging/sm750fb/sm750_accel.c b/drivers/staging/sm750fb/sm750_accel.c
index 668258c..ed82813 100644
--- a/drivers/staging/sm750fb/sm750_accel.c
+++ b/drivers/staging/sm750fb/sm750_accel.c
@@ -363,7 +363,7 @@ int hw_imageblit(struct lynx_accel *accel,
Note that input pitch is BYTE value, but the 2D Pitch register uses
pixel values. Need Byte to pixel conversion.
*/
- if(bytePerPixel = 3 ){
+ if(bytePerPixel = 3){
dx *= 3;
width *= 3;
startBit *= 3;
--
2.4.4
^ permalink raw reply related [flat|nested] 31+ messages in thread* [PATCH v3 04/19] staging: sm750fb: add space before open parenthesis
2015-06-24 16:20 [PATCH v3 00/19] staging: sm750fb: checkpatch.pl fixes Juston Li
` (2 preceding siblings ...)
2015-06-24 16:25 ` [PATCH v3 03/19] staging: sm750fb: remove space before close parenthesis Juston Li
@ 2015-06-24 16:25 ` Juston Li
2015-06-24 16:25 ` [PATCH v3 05/19] staging: sm750fb: remove space between function name and parenthesis Juston Li
` (14 subsequent siblings)
18 siblings, 0 replies; 31+ messages in thread
From: Juston Li @ 2015-06-24 16:25 UTC (permalink / raw)
To: sudipm.mukherjee, teddy.wang, gregkh, linux-fbdev, devel,
linux-kernel, dan.carpenter
Cc: Juston Li
fixes checkpatch.pl error:
ERROR: space required before the open parenthesis '('
Signed-off-by: Juston Li <juston.h.li@gmail.com>
---
drivers/staging/sm750fb/ddk750_display.c | 20 +++++------
drivers/staging/sm750fb/ddk750_dvi.c | 2 +-
drivers/staging/sm750fb/ddk750_help.c | 2 +-
drivers/staging/sm750fb/ddk750_mode.c | 12 +++----
drivers/staging/sm750fb/ddk750_power.c | 6 ++--
drivers/staging/sm750fb/sm750_accel.c | 8 ++---
drivers/staging/sm750fb/sm750_cursor.c | 32 ++++++++---------
drivers/staging/sm750fb/sm750_help.h | 2 +-
drivers/staging/sm750fb/sm750_hw.c | 62 ++++++++++++++++----------------
9 files changed, 73 insertions(+), 73 deletions(-)
diff --git a/drivers/staging/sm750fb/ddk750_display.c b/drivers/staging/sm750fb/ddk750_display.c
index 1c4049f..973dec3 100644
--- a/drivers/staging/sm750fb/ddk750_display.c
+++ b/drivers/staging/sm750fb/ddk750_display.c
@@ -49,7 +49,7 @@ static void setDisplayControl(int ctrl, int dispState)
{
cnt++;
POKE32(PANEL_DISPLAY_CTRL, ulDisplayCtrlReg);
- } while((PEEK32(PANEL_DISPLAY_CTRL) & ~ulReservedBits) !+ } while ((PEEK32(PANEL_DISPLAY_CTRL) & ~ulReservedBits) ! (ulDisplayCtrlReg & ~ulReservedBits));
printk("Set Panel Plane enbit:after tried %d times\n", cnt);
}
@@ -104,7 +104,7 @@ static void setDisplayControl(int ctrl, int dispState)
{
cnt++;
POKE32(CRT_DISPLAY_CTRL, ulDisplayCtrlReg);
- } while((PEEK32(CRT_DISPLAY_CTRL) & ~ulReservedBits) !+ } while ((PEEK32(CRT_DISPLAY_CTRL) & ~ulReservedBits) ! (ulDisplayCtrlReg & ~ulReservedBits));
printk("Set Crt Plane enbit:after tried %d times\n", cnt);
}
@@ -132,7 +132,7 @@ static void setDisplayControl(int ctrl, int dispState)
static void waitNextVerticalSync(int ctrl, int delay)
{
unsigned int status;
- if(!ctrl){
+ if (!ctrl){
/* primary controller */
/* Do not wait when the Primary PLL is off or display control is already off.
@@ -233,14 +233,14 @@ static void swPanelPowerSequence(int disp, int delay)
void ddk750_setLogicalDispOut(disp_output_t output)
{
unsigned int reg;
- if(output & PNL_2_USAGE){
+ if (output & PNL_2_USAGE){
/* set panel path controller select */
reg = PEEK32(PANEL_DISPLAY_CTRL);
reg = FIELD_VALUE(reg, PANEL_DISPLAY_CTRL, SELECT, (output & PNL_2_MASK)>>PNL_2_OFFSET);
POKE32(PANEL_DISPLAY_CTRL, reg);
}
- if(output & CRT_2_USAGE){
+ if (output & CRT_2_USAGE){
/* set crt path controller select */
reg = PEEK32(CRT_DISPLAY_CTRL);
reg = FIELD_VALUE(reg, CRT_DISPLAY_CTRL, SELECT, (output & CRT_2_MASK)>>CRT_2_OFFSET);
@@ -250,25 +250,25 @@ void ddk750_setLogicalDispOut(disp_output_t output)
}
- if(output & PRI_TP_USAGE){
+ if (output & PRI_TP_USAGE){
/* set primary timing and plane en_bit */
setDisplayControl(0, (output&PRI_TP_MASK)>>PRI_TP_OFFSET);
}
- if(output & SEC_TP_USAGE){
+ if (output & SEC_TP_USAGE){
/* set secondary timing and plane en_bit*/
setDisplayControl(1, (output&SEC_TP_MASK)>>SEC_TP_OFFSET);
}
- if(output & PNL_SEQ_USAGE){
+ if (output & PNL_SEQ_USAGE){
/* set panel sequence */
swPanelPowerSequence((output&PNL_SEQ_MASK)>>PNL_SEQ_OFFSET, 4);
}
- if(output & DAC_USAGE)
+ if (output & DAC_USAGE)
setDAC((output & DAC_MASK)>>DAC_OFFSET);
- if(output & DPMS_USAGE)
+ if (output & DPMS_USAGE)
ddk750_setDPMS((output & DPMS_MASK) >> DPMS_OFFSET);
}
diff --git a/drivers/staging/sm750fb/ddk750_dvi.c b/drivers/staging/sm750fb/ddk750_dvi.c
index 35866fa..4c64436 100644
--- a/drivers/staging/sm750fb/ddk750_dvi.c
+++ b/drivers/staging/sm750fb/ddk750_dvi.c
@@ -45,7 +45,7 @@ int dviInit(
{
dvi_ctrl_device_t *pCurrentDviCtrl;
pCurrentDviCtrl = g_dcftSupportedDviController;
- if(pCurrentDviCtrl->pfnInit != NULL)
+ if (pCurrentDviCtrl->pfnInit != NULL)
{
return pCurrentDviCtrl->pfnInit(edgeSelect, busSelect, dualEdgeClkSelect, hsyncEnable,
vsyncEnable, deskewEnable, deskewSetting, continuousSyncEnable,
diff --git a/drivers/staging/sm750fb/ddk750_help.c b/drivers/staging/sm750fb/ddk750_help.c
index 1adcafc..93ed958 100644
--- a/drivers/staging/sm750fb/ddk750_help.c
+++ b/drivers/staging/sm750fb/ddk750_help.c
@@ -10,7 +10,7 @@ void ddk750_set_mmio(void __iomem *addr, unsigned short devId, char revId)
mmio750 = addr;
devId750 = devId;
revId750 = revId;
- if(revId = 0xfe)
+ if (revId = 0xfe)
printk("found sm750le\n");
}
diff --git a/drivers/staging/sm750fb/ddk750_mode.c b/drivers/staging/sm750fb/ddk750_mode.c
index 4ee9ceb..cfe528c 100644
--- a/drivers/staging/sm750fb/ddk750_mode.c
+++ b/drivers/staging/sm750fb/ddk750_mode.c
@@ -80,7 +80,7 @@ static int programModeRegisters(mode_parameter_t *pModeParam, pll_value_t *pll)
int ret = 0;
int cnt = 0;
unsigned int ulTmpValue, ulReg;
- if(pll->clockType = SECONDARY_PLL)
+ if (pll->clockType = SECONDARY_PLL)
{
/* programe secondary pixel clock */
POKE32(CRT_PLL_CTRL, formatPllReg(pll));
@@ -107,7 +107,7 @@ static int programModeRegisters(mode_parameter_t *pModeParam, pll_value_t *pll)
FIELD_SET(0, CRT_DISPLAY_CTRL, PLANE, ENABLE);
- if(getChipType() = SM750LE){
+ if (getChipType() = SM750LE){
displayControlAdjust_SM750LE(pModeParam, ulTmpValue);
}else{
ulReg = PEEK32(CRT_DISPLAY_CTRL)
@@ -120,7 +120,7 @@ static int programModeRegisters(mode_parameter_t *pModeParam, pll_value_t *pll)
}
}
- else if(pll->clockType = PRIMARY_PLL)
+ else if (pll->clockType = PRIMARY_PLL)
{
unsigned int ulReservedBits;
POKE32(PANEL_PLL_CTRL, formatPllReg(pll));
@@ -170,10 +170,10 @@ static int programModeRegisters(mode_parameter_t *pModeParam, pll_value_t *pll)
POKE32(PANEL_DISPLAY_CTRL, ulTmpValue|ulReg);
#if 1
- while((PEEK32(PANEL_DISPLAY_CTRL) & ~ulReservedBits) != (ulTmpValue|ulReg))
+ while ((PEEK32(PANEL_DISPLAY_CTRL) & ~ulReservedBits) != (ulTmpValue|ulReg))
{
cnt++;
- if(cnt > 1000)
+ if (cnt > 1000)
break;
POKE32(PANEL_DISPLAY_CTRL, ulTmpValue|ulReg);
}
@@ -193,7 +193,7 @@ int ddk750_setModeTiming(mode_parameter_t *parm, clock_type_t clock)
pll.clockType = clock;
uiActualPixelClk = calcPllValue(parm->pixel_clock, &pll);
- if(getChipType() = SM750LE){
+ if (getChipType() = SM750LE){
/* set graphic mode via IO method */
outb_p(0x88, 0x3d4);
outb_p(0x06, 0x3d5);
diff --git a/drivers/staging/sm750fb/ddk750_power.c b/drivers/staging/sm750fb/ddk750_power.c
index 44b8eb1..a2d9ee6 100644
--- a/drivers/staging/sm750fb/ddk750_power.c
+++ b/drivers/staging/sm750fb/ddk750_power.c
@@ -5,7 +5,7 @@
void ddk750_setDPMS(DPMS_t state)
{
unsigned int value;
- if(getChipType() = SM750LE){
+ if (getChipType() = SM750LE){
value = PEEK32(CRT_DISPLAY_CTRL);
POKE32(CRT_DISPLAY_CTRL, FIELD_VALUE(value, CRT_DISPLAY_CTRL, DPMS, state));
}else{
@@ -17,7 +17,7 @@ void ddk750_setDPMS(DPMS_t state)
unsigned int getPowerMode(void)
{
- if(getChipType() = SM750LE)
+ if (getChipType() = SM750LE)
return 0;
return (FIELD_GET(PEEK32(POWER_MODE_CTRL), POWER_MODE_CTRL, MODE));
}
@@ -33,7 +33,7 @@ void setPowerMode(unsigned int powerMode)
control_value = PEEK32(POWER_MODE_CTRL);
- if(getChipType() = SM750LE)
+ if (getChipType() = SM750LE)
return;
switch (powerMode)
diff --git a/drivers/staging/sm750fb/sm750_accel.c b/drivers/staging/sm750fb/sm750_accel.c
index ed82813..3c61103 100644
--- a/drivers/staging/sm750fb/sm750_accel.c
+++ b/drivers/staging/sm750fb/sm750_accel.c
@@ -96,7 +96,7 @@ int hw_fillrect(struct lynx_accel *accel,
{
u32 deCtrl;
- if(accel->de_wait() != 0)
+ if (accel->de_wait() != 0)
{
/* int time wait and always busy,seems hardware
* got something error */
@@ -248,7 +248,7 @@ unsigned int rop2) /* ROP value */
Note that input pitch is BYTE value, but the 2D Pitch register uses
pixel values. Need Byte to pixel conversion.
*/
- if(Bpp = 3){
+ if (Bpp = 3){
sx *= 3;
dx *= 3;
width *= 3;
@@ -344,7 +344,7 @@ int hw_imageblit(struct lynx_accel *accel,
ul4BytesPerScan = ulBytesPerScan & ~3;
ulBytesRemain = ulBytesPerScan & 3;
- if(accel->de_wait() != 0)
+ if (accel->de_wait() != 0)
{
return -1;
}
@@ -363,7 +363,7 @@ int hw_imageblit(struct lynx_accel *accel,
Note that input pitch is BYTE value, but the 2D Pitch register uses
pixel values. Need Byte to pixel conversion.
*/
- if(bytePerPixel = 3){
+ if (bytePerPixel = 3){
dx *= 3;
width *= 3;
startBit *= 3;
diff --git a/drivers/staging/sm750fb/sm750_cursor.c b/drivers/staging/sm750fb/sm750_cursor.c
index 405e24b..95cfb8f 100644
--- a/drivers/staging/sm750fb/sm750_cursor.c
+++ b/drivers/staging/sm750fb/sm750_cursor.c
@@ -122,7 +122,7 @@ void hw_cursor_setData(struct lynx_cursor *cursor,
odd=0;
*/
- for(i=0;i<count;i++)
+ for (i=0;i<count;i++)
{
color = *pcol++;
mask = *pmsk++;
@@ -132,15 +132,15 @@ void hw_cursor_setData(struct lynx_cursor *cursor,
* but method 2 shows no lag
* and method 1 seems a bit wrong*/
#if 0
- if(rop = ROP_XOR)
+ if (rop = ROP_XOR)
opr = mask ^ color;
else
opr = mask & color;
- for(j=0;j<8;j++)
+ for (j=0;j<8;j++)
{
- if(opr & (0x80 >> j))
+ if (opr & (0x80 >> j))
{ /* use fg color,id = 2 */
data |= 2 << (j*2);
}else{
@@ -149,9 +149,9 @@ void hw_cursor_setData(struct lynx_cursor *cursor,
}
}
#else
- for(j=0;j<8;j++){
- if(mask & (0x80>>j)){
- if(rop = ROP_XOR)
+ for (j=0;j<8;j++){
+ if (mask & (0x80>>j)){
+ if (rop = ROP_XOR)
opr = mask ^ color;
else
opr = mask & color;
@@ -165,9 +165,9 @@ void hw_cursor_setData(struct lynx_cursor *cursor,
/* assume pitch is 1,2,4,8,...*/
#if 0
- if(!((i+1)&(pitch-1))) /* below line equal to is line */
+ if (!((i+1)&(pitch-1))) /* below line equal to is line */
#else
- if((i+1) % pitch = 0)
+ if ((i+1) % pitch = 0)
#endif
{
/* need a return */
@@ -204,7 +204,7 @@ void hw_cursor_setData2(struct lynx_cursor *cursor,
pstart = cursor->vstart;
pbuffer = pstart;
- for(i=0;i<count;i++)
+ for (i=0;i<count;i++)
{
color = *pcol++;
mask = *pmsk++;
@@ -212,15 +212,15 @@ void hw_cursor_setData2(struct lynx_cursor *cursor,
/* either method below works well, but method 2 shows no lag */
#if 0
- if(rop = ROP_XOR)
+ if (rop = ROP_XOR)
opr = mask ^ color;
else
opr = mask & color;
- for(j=0;j<8;j++)
+ for (j=0;j<8;j++)
{
- if(opr & (0x80 >> j))
+ if (opr & (0x80 >> j))
{ /* use fg color,id = 2 */
data |= 2 << (j*2);
}else{
@@ -229,15 +229,15 @@ void hw_cursor_setData2(struct lynx_cursor *cursor,
}
}
#else
- for(j=0;j<8;j++){
- if(mask & (1<<j))
+ for (j=0;j<8;j++){
+ if (mask & (1<<j))
data |= ((color & (1<<j))?1:2)<<(j*2);
}
#endif
iowrite16(data, pbuffer);
/* assume pitch is 1,2,4,8,...*/
- if(!(i&(pitch-1)))
+ if (!(i&(pitch-1)))
{
/* need a return */
pstart += offset;
diff --git a/drivers/staging/sm750fb/sm750_help.h b/drivers/staging/sm750fb/sm750_help.h
index ac0744e..493af3a 100644
--- a/drivers/staging/sm750fb/sm750_help.h
+++ b/drivers/staging/sm750fb/sm750_help.h
@@ -73,7 +73,7 @@
static inline unsigned int absDiff(unsigned int a, unsigned int b)
{
- if(a<b)
+ if (a<b)
return b-a;
else
return a-b;
diff --git a/drivers/staging/sm750fb/sm750_hw.c b/drivers/staging/sm750fb/sm750_hw.c
index 28db9c7..5abac9b 100644
--- a/drivers/staging/sm750fb/sm750_hw.c
+++ b/drivers/staging/sm750fb/sm750_hw.c
@@ -44,7 +44,7 @@ int hw_sm750_map(struct lynx_share* share, struct pci_dev* pdev)
* successfully
* */
- if((ret = pci_request_region(pdev, 1, "sm750fb")))
+ if ((ret = pci_request_region(pdev, 1, "sm750fb")))
{
pr_err("Can not request PCI regions.\n");
goto exit;
@@ -52,7 +52,7 @@ int hw_sm750_map(struct lynx_share* share, struct pci_dev* pdev)
/* now map mmio and vidmem*/
share->pvReg = ioremap_nocache(share->vidreg_start, share->vidreg_size);
- if(!share->pvReg){
+ if (!share->pvReg){
pr_err("mmio failed\n");
ret = -EFAULT;
goto exit;
@@ -78,7 +78,7 @@ int hw_sm750_map(struct lynx_share* share, struct pci_dev* pdev)
/* reserve the vidmem space of smi adaptor */
#if 0
- if((ret = pci_request_region(pdev, 0, _moduleName_)))
+ if ((ret = pci_request_region(pdev, 0, _moduleName_)))
{
pr_err("Can not request PCI regions.\n");
goto exit;
@@ -87,7 +87,7 @@ int hw_sm750_map(struct lynx_share* share, struct pci_dev* pdev)
share->pvMem = ioremap_wc(share->vidmem_start, share->vidmem_size);
- if(!share->pvMem){
+ if (!share->pvMem){
pr_err("Map video memory failed\n");
ret = -EFAULT;
goto exit;
@@ -107,19 +107,19 @@ int hw_sm750_inithw(struct lynx_share *share, struct pci_dev *pdev)
spec_share = container_of(share, struct sm750_share, share);
parm = &spec_share->state.initParm;
- if(parm->chip_clk = 0)
+ if (parm->chip_clk = 0)
parm->chip_clk = (getChipType() = SM750LE)?
DEFAULT_SM750LE_CHIP_CLOCK :
DEFAULT_SM750_CHIP_CLOCK;
- if(parm->mem_clk = 0)
+ if (parm->mem_clk = 0)
parm->mem_clk = parm->chip_clk;
- if(parm->master_clk = 0)
+ if (parm->master_clk = 0)
parm->master_clk = parm->chip_clk/3;
ddk750_initHw((initchip_param_t *)&spec_share->state.initParm);
/* for sm718,open pci burst */
- if(share->devid = 0x718){
+ if (share->devid = 0x718){
POKE32(SYSTEM_CTRL,
FIELD_SET(PEEK32(SYSTEM_CTRL), SYSTEM_CTRL, PCI_BURST, ON));
}
@@ -130,10 +130,10 @@ int hw_sm750_inithw(struct lynx_share *share, struct pci_dev *pdev)
ddk750_initDVIDisp();
#endif
- if(getChipType() != SM750LE)
+ if (getChipType() != SM750LE)
{
/* does user need CRT ?*/
- if(spec_share->state.nocrt){
+ if (spec_share->state.nocrt){
POKE32(MISC_CTRL,
FIELD_SET(PEEK32(MISC_CTRL),
MISC_CTRL,
@@ -191,7 +191,7 @@ int hw_sm750_inithw(struct lynx_share *share, struct pci_dev *pdev)
}
/* init 2d engine */
- if(!share->accel_off){
+ if (!share->accel_off){
hw_sm750_initAccel(share);
}
@@ -228,19 +228,19 @@ int hw_sm750_output_setMode(struct lynxfb_output* output,
channel = *output->channel;
- if(getChipType() != SM750LE){
- if(channel = sm750_primary){
+ if (getChipType() != SM750LE){
+ if (channel = sm750_primary){
pr_info("primary channel\n");
- if(output->paths & sm750_panel)
+ if (output->paths & sm750_panel)
dispSet |= do_LCD1_PRI;
- if(output->paths & sm750_crt)
+ if (output->paths & sm750_crt)
dispSet |= do_CRT_PRI;
}else{
pr_info("secondary channel\n");
- if(output->paths & sm750_panel)
+ if (output->paths & sm750_panel)
dispSet |= do_LCD1_SEC;
- if(output->paths & sm750_crt)
+ if (output->paths & sm750_crt)
dispSet |= do_CRT_SEC;
}
@@ -308,9 +308,9 @@ int hw_sm750_crtc_setMode(struct lynxfb_crtc* crtc,
par = container_of(crtc, struct lynxfb_par, crtc);
share = par->share;
#if 1
- if(!share->accel_off){
+ if (!share->accel_off){
/* set 2d engine pixel format according to mode bpp */
- switch(var->bits_per_pixel){
+ switch (var->bits_per_pixel){
case 8:
fmt = 0;
break;
@@ -341,19 +341,19 @@ int hw_sm750_crtc_setMode(struct lynxfb_crtc* crtc,
modparm.vertical_total = var->yres + var->upper_margin + var->lower_margin + var->vsync_len;
/* choose pll */
- if(crtc->channel != sm750_secondary)
+ if (crtc->channel != sm750_secondary)
clock = PRIMARY_PLL;
else
clock = SECONDARY_PLL;
pr_debug("Request pixel clock = %lu\n", modparm.pixel_clock);
ret = ddk750_setModeTiming(&modparm, clock);
- if(ret){
+ if (ret){
pr_err("Set mode timing failed\n");
goto exit;
}
- if(crtc->channel != sm750_secondary){
+ if (crtc->channel != sm750_secondary){
/* set pitch, offset ,width,start address ,etc... */
POKE32(PANEL_FB_ADDRESS,
FIELD_SET(0, PANEL_FB_ADDRESS, STATUS, CURRENT)|
@@ -429,7 +429,7 @@ int hw_sm750_setColReg(struct lynxfb_crtc* crtc, ushort index,
int hw_sm750le_setBLANK(struct lynxfb_output * output, int blank){
int dpms, crtdb;
- switch(blank)
+ switch (blank)
{
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 10)
case FB_BLANK_UNBLANK:
@@ -473,7 +473,7 @@ int hw_sm750le_setBLANK(struct lynxfb_output * output, int blank){
return -EINVAL;
}
- if(output->paths & sm750_crt){
+ if (output->paths & sm750_crt){
POKE32(CRT_DISPLAY_CTRL, FIELD_VALUE(PEEK32(CRT_DISPLAY_CTRL), CRT_DISPLAY_CTRL, DPMS, dpms));
POKE32(CRT_DISPLAY_CTRL, FIELD_VALUE(PEEK32(CRT_DISPLAY_CTRL), CRT_DISPLAY_CTRL, BLANK, crtdb));
}
@@ -535,13 +535,13 @@ int hw_sm750_setBLANK(struct lynxfb_output* output, int blank)
break;
}
- if(output->paths & sm750_crt){
+ if (output->paths & sm750_crt){
POKE32(SYSTEM_CTRL, FIELD_VALUE(PEEK32(SYSTEM_CTRL), SYSTEM_CTRL, DPMS, dpms));
POKE32(CRT_DISPLAY_CTRL, FIELD_VALUE(PEEK32(CRT_DISPLAY_CTRL), CRT_DISPLAY_CTRL, BLANK, crtdb));
}
- if(output->paths & sm750_panel){
+ if (output->paths & sm750_panel){
POKE32(PANEL_DISPLAY_CTRL, FIELD_VALUE(PEEK32(PANEL_DISPLAY_CTRL), PANEL_DISPLAY_CTRL, DATA, pps));
}
@@ -554,7 +554,7 @@ void hw_sm750_initAccel(struct lynx_share *share)
u32 reg;
enable2DEngine(1);
- if(getChipType() = SM750LE){
+ if (getChipType() = SM750LE){
reg = PEEK32(DE_STATE1);
reg = FIELD_SET(reg, DE_STATE1, DE_ABORT, ON);
POKE32(DE_STATE1, reg);
@@ -581,9 +581,9 @@ void hw_sm750_initAccel(struct lynx_share *share)
int hw_sm750le_deWait(void)
{
int i=0x10000000;
- while(i--){
+ while (i--){
unsigned int dwVal = PEEK32(DE_STATE2);
- if((FIELD_GET(dwVal, DE_STATE2, DE_STATUS) = DE_STATE2_DE_STATUS_IDLE) &&
+ if ((FIELD_GET(dwVal, DE_STATE2, DE_STATUS) = DE_STATE2_DE_STATUS_IDLE) &&
(FIELD_GET(dwVal, DE_STATE2, DE_FIFO) = DE_STATE2_DE_FIFO_EMPTY) &&
(FIELD_GET(dwVal, DE_STATE2, DE_MEM_FIFO) = DE_STATE2_DE_MEM_FIFO_EMPTY))
{
@@ -598,9 +598,9 @@ int hw_sm750le_deWait(void)
int hw_sm750_deWait(void)
{
int i=0x10000000;
- while(i--){
+ while (i--){
unsigned int dwVal = PEEK32(SYSTEM_CTRL);
- if((FIELD_GET(dwVal, SYSTEM_CTRL, DE_STATUS) = SYSTEM_CTRL_DE_STATUS_IDLE) &&
+ if ((FIELD_GET(dwVal, SYSTEM_CTRL, DE_STATUS) = SYSTEM_CTRL_DE_STATUS_IDLE) &&
(FIELD_GET(dwVal, SYSTEM_CTRL, DE_FIFO) = SYSTEM_CTRL_DE_FIFO_EMPTY) &&
(FIELD_GET(dwVal, SYSTEM_CTRL, DE_MEM_FIFO) = SYSTEM_CTRL_DE_MEM_FIFO_EMPTY))
{
--
2.4.4
^ permalink raw reply related [flat|nested] 31+ messages in thread* [PATCH v3 05/19] staging: sm750fb: remove space between function name and parenthesis
2015-06-24 16:20 [PATCH v3 00/19] staging: sm750fb: checkpatch.pl fixes Juston Li
` (3 preceding siblings ...)
2015-06-24 16:25 ` [PATCH v3 04/19] staging: sm750fb: add space before open parenthesis Juston Li
@ 2015-06-24 16:25 ` Juston Li
2015-06-24 16:25 ` [PATCH v3 06/19] staging: sm750fb: add space before open brace Juston Li
` (13 subsequent siblings)
18 siblings, 0 replies; 31+ messages in thread
From: Juston Li @ 2015-06-24 16:25 UTC (permalink / raw)
To: sudipm.mukherjee, teddy.wang, gregkh, linux-fbdev, devel,
linux-kernel, dan.carpenter
Cc: Juston Li
fixes checkpatch.pl warning:
WARNING: space prohibited between function name and open parenthesis '('
Signed-off-by: Juston Li <juston.h.li@gmail.com>
---
drivers/staging/sm750fb/sm750_accel.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/staging/sm750fb/sm750_accel.c b/drivers/staging/sm750fb/sm750_accel.c
index 3c61103..bb96ea5 100644
--- a/drivers/staging/sm750fb/sm750_accel.c
+++ b/drivers/staging/sm750fb/sm750_accel.c
@@ -278,11 +278,11 @@ unsigned int rop2) /* ROP value */
{
write_dpr(accel, DE_SOURCE,
- FIELD_SET (0, DE_SOURCE, WRAP, DISABLE) |
+ FIELD_SET(0, DE_SOURCE, WRAP, DISABLE) |
FIELD_VALUE(0, DE_SOURCE, X_K1, sx) |
FIELD_VALUE(0, DE_SOURCE, Y_K2, sy)); /* dpr0 */
write_dpr(accel, DE_DESTINATION,
- FIELD_SET (0, DE_DESTINATION, WRAP, DISABLE) |
+ FIELD_SET(0, DE_DESTINATION, WRAP, DISABLE) |
FIELD_VALUE(0, DE_DESTINATION, X, dx) |
FIELD_VALUE(0, DE_DESTINATION, Y, dy)); /* dpr04 */
write_dpr(accel, DE_DIMENSION,
@@ -390,11 +390,11 @@ int hw_imageblit(struct lynx_accel *accel,
/* Note: For 2D Source in Host Write, only X_K1_MONO field is needed, and Y_K2 field is not used.
For mono bitmap, use startBit for X_K1. */
write_dpr(accel, DE_SOURCE,
- FIELD_SET (0, DE_SOURCE, WRAP, DISABLE) |
+ FIELD_SET(0, DE_SOURCE, WRAP, DISABLE) |
FIELD_VALUE(0, DE_SOURCE, X_K1_MONO, startBit)); /* dpr00 */
write_dpr(accel, DE_DESTINATION,
- FIELD_SET (0, DE_DESTINATION, WRAP, DISABLE) |
+ FIELD_SET(0, DE_DESTINATION, WRAP, DISABLE) |
FIELD_VALUE(0, DE_DESTINATION, X, dx) |
FIELD_VALUE(0, DE_DESTINATION, Y, dy)); /* dpr04 */
--
2.4.4
^ permalink raw reply related [flat|nested] 31+ messages in thread* [PATCH v3 06/19] staging: sm750fb: add space before open brace
2015-06-24 16:20 [PATCH v3 00/19] staging: sm750fb: checkpatch.pl fixes Juston Li
` (4 preceding siblings ...)
2015-06-24 16:25 ` [PATCH v3 05/19] staging: sm750fb: remove space between function name and parenthesis Juston Li
@ 2015-06-24 16:25 ` Juston Li
2015-06-24 16:25 ` [PATCH v3 07/19] staging: sm750fb: add space after close brace Juston Li
` (12 subsequent siblings)
18 siblings, 0 replies; 31+ messages in thread
From: Juston Li @ 2015-06-24 16:25 UTC (permalink / raw)
To: sudipm.mukherjee, teddy.wang, gregkh, linux-fbdev, devel,
linux-kernel, dan.carpenter
Cc: Juston Li
fixes checkpatch.pl error:
ERROR: space required before the open brace '{'
Signed-off-by: Juston Li <juston.h.li@gmail.com>
---
drivers/staging/sm750fb/ddk750_display.c | 14 ++++----
drivers/staging/sm750fb/ddk750_mode.c | 8 ++---
drivers/staging/sm750fb/ddk750_power.c | 4 +--
drivers/staging/sm750fb/sm750_accel.c | 6 ++--
drivers/staging/sm750fb/sm750_cursor.c | 14 ++++----
drivers/staging/sm750fb/sm750_hw.c | 56 ++++++++++++++++----------------
6 files changed, 51 insertions(+), 51 deletions(-)
diff --git a/drivers/staging/sm750fb/ddk750_display.c b/drivers/staging/sm750fb/ddk750_display.c
index 973dec3..c7171a4 100644
--- a/drivers/staging/sm750fb/ddk750_display.c
+++ b/drivers/staging/sm750fb/ddk750_display.c
@@ -132,7 +132,7 @@ static void setDisplayControl(int ctrl, int dispState)
static void waitNextVerticalSync(int ctrl, int delay)
{
unsigned int status;
- if (!ctrl){
+ if (!ctrl) {
/* primary controller */
/* Do not wait when the Primary PLL is off or display control is already off.
@@ -166,7 +166,7 @@ static void waitNextVerticalSync(int ctrl, int delay)
while (status = SYSTEM_CTRL_PANEL_VSYNC_INACTIVE);
}
- }else{
+ }else {
/* Do not wait when the Primary PLL is off or display control is already off.
This will prevent the software to wait forever. */
@@ -233,14 +233,14 @@ static void swPanelPowerSequence(int disp, int delay)
void ddk750_setLogicalDispOut(disp_output_t output)
{
unsigned int reg;
- if (output & PNL_2_USAGE){
+ if (output & PNL_2_USAGE) {
/* set panel path controller select */
reg = PEEK32(PANEL_DISPLAY_CTRL);
reg = FIELD_VALUE(reg, PANEL_DISPLAY_CTRL, SELECT, (output & PNL_2_MASK)>>PNL_2_OFFSET);
POKE32(PANEL_DISPLAY_CTRL, reg);
}
- if (output & CRT_2_USAGE){
+ if (output & CRT_2_USAGE) {
/* set crt path controller select */
reg = PEEK32(CRT_DISPLAY_CTRL);
reg = FIELD_VALUE(reg, CRT_DISPLAY_CTRL, SELECT, (output & CRT_2_MASK)>>CRT_2_OFFSET);
@@ -250,17 +250,17 @@ void ddk750_setLogicalDispOut(disp_output_t output)
}
- if (output & PRI_TP_USAGE){
+ if (output & PRI_TP_USAGE) {
/* set primary timing and plane en_bit */
setDisplayControl(0, (output&PRI_TP_MASK)>>PRI_TP_OFFSET);
}
- if (output & SEC_TP_USAGE){
+ if (output & SEC_TP_USAGE) {
/* set secondary timing and plane en_bit*/
setDisplayControl(1, (output&SEC_TP_MASK)>>SEC_TP_OFFSET);
}
- if (output & PNL_SEQ_USAGE){
+ if (output & PNL_SEQ_USAGE) {
/* set panel sequence */
swPanelPowerSequence((output&PNL_SEQ_MASK)>>PNL_SEQ_OFFSET, 4);
}
diff --git a/drivers/staging/sm750fb/ddk750_mode.c b/drivers/staging/sm750fb/ddk750_mode.c
index cfe528c..efc1fab 100644
--- a/drivers/staging/sm750fb/ddk750_mode.c
+++ b/drivers/staging/sm750fb/ddk750_mode.c
@@ -107,9 +107,9 @@ static int programModeRegisters(mode_parameter_t *pModeParam, pll_value_t *pll)
FIELD_SET(0, CRT_DISPLAY_CTRL, PLANE, ENABLE);
- if (getChipType() = SM750LE){
+ if (getChipType() = SM750LE) {
displayControlAdjust_SM750LE(pModeParam, ulTmpValue);
- }else{
+ }else {
ulReg = PEEK32(CRT_DISPLAY_CTRL)
& FIELD_CLEAR(CRT_DISPLAY_CTRL, VSYNC_PHASE)
& FIELD_CLEAR(CRT_DISPLAY_CTRL, HSYNC_PHASE)
@@ -179,7 +179,7 @@ static int programModeRegisters(mode_parameter_t *pModeParam, pll_value_t *pll)
}
#endif
}
- else{
+ else {
ret = -1;
}
return ret;
@@ -193,7 +193,7 @@ int ddk750_setModeTiming(mode_parameter_t *parm, clock_type_t clock)
pll.clockType = clock;
uiActualPixelClk = calcPllValue(parm->pixel_clock, &pll);
- if (getChipType() = SM750LE){
+ if (getChipType() = SM750LE) {
/* set graphic mode via IO method */
outb_p(0x88, 0x3d4);
outb_p(0x06, 0x3d5);
diff --git a/drivers/staging/sm750fb/ddk750_power.c b/drivers/staging/sm750fb/ddk750_power.c
index a2d9ee6..e2c0bb3 100644
--- a/drivers/staging/sm750fb/ddk750_power.c
+++ b/drivers/staging/sm750fb/ddk750_power.c
@@ -5,10 +5,10 @@
void ddk750_setDPMS(DPMS_t state)
{
unsigned int value;
- if (getChipType() = SM750LE){
+ if (getChipType() = SM750LE) {
value = PEEK32(CRT_DISPLAY_CTRL);
POKE32(CRT_DISPLAY_CTRL, FIELD_VALUE(value, CRT_DISPLAY_CTRL, DPMS, state));
- }else{
+ }else {
value = PEEK32(SYSTEM_CTRL);
value= FIELD_VALUE(value, SYSTEM_CTRL, DPMS, state);
POKE32(SYSTEM_CTRL, value);
diff --git a/drivers/staging/sm750fb/sm750_accel.c b/drivers/staging/sm750fb/sm750_accel.c
index bb96ea5..25dc15b 100644
--- a/drivers/staging/sm750fb/sm750_accel.c
+++ b/drivers/staging/sm750fb/sm750_accel.c
@@ -248,7 +248,7 @@ unsigned int rop2) /* ROP value */
Note that input pitch is BYTE value, but the 2D Pitch register uses
pixel values. Need Byte to pixel conversion.
*/
- if (Bpp = 3){
+ if (Bpp = 3) {
sx *= 3;
dx *= 3;
width *= 3;
@@ -271,7 +271,7 @@ unsigned int rop2) /* ROP value */
FIELD_VALUE(0, DE_WINDOW_WIDTH, DESTINATION, (dPitch/Bpp)) |
FIELD_VALUE(0, DE_WINDOW_WIDTH, SOURCE, (sPitch/Bpp))); /* dpr3c */
- if (accel->de_wait() != 0){
+ if (accel->de_wait() != 0) {
return -1;
}
@@ -363,7 +363,7 @@ int hw_imageblit(struct lynx_accel *accel,
Note that input pitch is BYTE value, but the 2D Pitch register uses
pixel values. Need Byte to pixel conversion.
*/
- if (bytePerPixel = 3){
+ if (bytePerPixel = 3) {
dx *= 3;
width *= 3;
startBit *= 3;
diff --git a/drivers/staging/sm750fb/sm750_cursor.c b/drivers/staging/sm750fb/sm750_cursor.c
index 95cfb8f..3a21af9 100644
--- a/drivers/staging/sm750fb/sm750_cursor.c
+++ b/drivers/staging/sm750fb/sm750_cursor.c
@@ -143,14 +143,14 @@ void hw_cursor_setData(struct lynx_cursor *cursor,
if (opr & (0x80 >> j))
{ /* use fg color,id = 2 */
data |= 2 << (j*2);
- }else{
+ }else {
/* use bg color,id = 1 */
data |= 1 << (j*2);
}
}
#else
- for (j=0;j<8;j++){
- if (mask & (0x80>>j)){
+ for (j=0;j<8;j++) {
+ if (mask & (0x80>>j)) {
if (rop = ROP_XOR)
opr = mask ^ color;
else
@@ -173,7 +173,7 @@ void hw_cursor_setData(struct lynx_cursor *cursor,
/* need a return */
pstart += offset;
pbuffer = pstart;
- }else{
+ }else {
pbuffer += sizeof(u16);
}
@@ -223,13 +223,13 @@ void hw_cursor_setData2(struct lynx_cursor *cursor,
if (opr & (0x80 >> j))
{ /* use fg color,id = 2 */
data |= 2 << (j*2);
- }else{
+ }else {
/* use bg color,id = 1 */
data |= 1 << (j*2);
}
}
#else
- for (j=0;j<8;j++){
+ for (j=0;j<8;j++) {
if (mask & (1<<j))
data |= ((color & (1<<j))?1:2)<<(j*2);
}
@@ -242,7 +242,7 @@ void hw_cursor_setData2(struct lynx_cursor *cursor,
/* need a return */
pstart += offset;
pbuffer = pstart;
- }else{
+ }else {
pbuffer += sizeof(u16);
}
diff --git a/drivers/staging/sm750fb/sm750_hw.c b/drivers/staging/sm750fb/sm750_hw.c
index 5abac9b..4dfc6e6 100644
--- a/drivers/staging/sm750fb/sm750_hw.c
+++ b/drivers/staging/sm750fb/sm750_hw.c
@@ -52,11 +52,11 @@ int hw_sm750_map(struct lynx_share* share, struct pci_dev* pdev)
/* now map mmio and vidmem*/
share->pvReg = ioremap_nocache(share->vidreg_start, share->vidreg_size);
- if (!share->pvReg){
+ if (!share->pvReg) {
pr_err("mmio failed\n");
ret = -EFAULT;
goto exit;
- }else{
+ }else {
pr_info("mmio virtual addr = %p\n", share->pvReg);
}
@@ -87,11 +87,11 @@ int hw_sm750_map(struct lynx_share* share, struct pci_dev* pdev)
share->pvMem = ioremap_wc(share->vidmem_start, share->vidmem_size);
- if (!share->pvMem){
+ if (!share->pvMem) {
pr_err("Map video memory failed\n");
ret = -EFAULT;
goto exit;
- }else{
+ }else {
pr_info("video memory vaddr = %p\n", share->pvMem);
}
exit:
@@ -119,7 +119,7 @@ int hw_sm750_inithw(struct lynx_share *share, struct pci_dev *pdev)
ddk750_initHw((initchip_param_t *)&spec_share->state.initParm);
/* for sm718,open pci burst */
- if (share->devid = 0x718){
+ if (share->devid = 0x718) {
POKE32(SYSTEM_CTRL,
FIELD_SET(PEEK32(SYSTEM_CTRL), SYSTEM_CTRL, PCI_BURST, ON));
}
@@ -133,7 +133,7 @@ int hw_sm750_inithw(struct lynx_share *share, struct pci_dev *pdev)
if (getChipType() != SM750LE)
{
/* does user need CRT ?*/
- if (spec_share->state.nocrt){
+ if (spec_share->state.nocrt) {
POKE32(MISC_CTRL,
FIELD_SET(PEEK32(MISC_CTRL),
MISC_CTRL,
@@ -143,7 +143,7 @@ int hw_sm750_inithw(struct lynx_share *share, struct pci_dev *pdev)
FIELD_SET(PEEK32(SYSTEM_CTRL),
SYSTEM_CTRL,
DPMS, VNHN));
- }else{
+ }else {
POKE32(MISC_CTRL,
FIELD_SET(PEEK32(MISC_CTRL),
MISC_CTRL,
@@ -155,7 +155,7 @@ int hw_sm750_inithw(struct lynx_share *share, struct pci_dev *pdev)
DPMS, VPHP));
}
- switch (spec_share->state.pnltype){
+ switch (spec_share->state.pnltype) {
case sm750_doubleTFT:
case sm750_24TFT:
case sm750_dualTFT:
@@ -166,7 +166,7 @@ int hw_sm750_inithw(struct lynx_share *share, struct pci_dev *pdev)
spec_share->state.pnltype));
break;
}
- }else{
+ }else {
/* for 750LE ,no DVI chip initilization makes Monitor no signal */
/* Set up GPIO for software I2C to program DVI chip in the
Xilinx SP605 board, in order to have video signal.
@@ -191,7 +191,7 @@ int hw_sm750_inithw(struct lynx_share *share, struct pci_dev *pdev)
}
/* init 2d engine */
- if (!share->accel_off){
+ if (!share->accel_off) {
hw_sm750_initAccel(share);
}
@@ -228,15 +228,15 @@ int hw_sm750_output_setMode(struct lynxfb_output* output,
channel = *output->channel;
- if (getChipType() != SM750LE){
- if (channel = sm750_primary){
+ if (getChipType() != SM750LE) {
+ if (channel = sm750_primary) {
pr_info("primary channel\n");
if (output->paths & sm750_panel)
dispSet |= do_LCD1_PRI;
if (output->paths & sm750_crt)
dispSet |= do_CRT_PRI;
- }else{
+ }else {
pr_info("secondary channel\n");
if (output->paths & sm750_panel)
dispSet |= do_LCD1_SEC;
@@ -245,7 +245,7 @@ int hw_sm750_output_setMode(struct lynxfb_output* output,
}
ddk750_setLogicalDispOut(dispSet);
- }else{
+ }else {
/* just open DISPLAY_CONTROL_750LE register bit 3:0*/
u32 reg;
reg = PEEK32(DISPLAY_CONTROL_750LE);
@@ -270,7 +270,7 @@ int hw_sm750_crtc_checkMode(struct lynxfb_crtc* crtc, struct fb_var_screeninfo*
share = container_of(crtc, struct lynxfb_par, crtc)->share;
- switch (var->bits_per_pixel){
+ switch (var->bits_per_pixel) {
case 8:
case 16:
break;
@@ -308,9 +308,9 @@ int hw_sm750_crtc_setMode(struct lynxfb_crtc* crtc,
par = container_of(crtc, struct lynxfb_par, crtc);
share = par->share;
#if 1
- if (!share->accel_off){
+ if (!share->accel_off) {
/* set 2d engine pixel format according to mode bpp */
- switch (var->bits_per_pixel){
+ switch (var->bits_per_pixel) {
case 8:
fmt = 0;
break;
@@ -348,12 +348,12 @@ int hw_sm750_crtc_setMode(struct lynxfb_crtc* crtc,
pr_debug("Request pixel clock = %lu\n", modparm.pixel_clock);
ret = ddk750_setModeTiming(&modparm, clock);
- if (ret){
+ if (ret) {
pr_err("Set mode timing failed\n");
goto exit;
}
- if (crtc->channel != sm750_secondary){
+ if (crtc->channel != sm750_secondary) {
/* set pitch, offset ,width,start address ,etc... */
POKE32(PANEL_FB_ADDRESS,
FIELD_SET(0, PANEL_FB_ADDRESS, STATUS, CURRENT)|
@@ -389,7 +389,7 @@ int hw_sm750_crtc_setMode(struct lynxfb_crtc* crtc,
PANEL_DISPLAY_CTRL, FORMAT,
(var->bits_per_pixel >> 4)
));
- }else{
+ }else {
/* not implemented now */
POKE32(CRT_FB_ADDRESS, crtc->oScreen);
reg = var->xres * (var->bits_per_pixel >> 3);
@@ -426,7 +426,7 @@ int hw_sm750_setColReg(struct lynxfb_crtc* crtc, ushort index,
return 0;
}
-int hw_sm750le_setBLANK(struct lynxfb_output * output, int blank){
+int hw_sm750le_setBLANK(struct lynxfb_output * output, int blank) {
int dpms, crtdb;
switch (blank)
@@ -473,7 +473,7 @@ int hw_sm750le_setBLANK(struct lynxfb_output * output, int blank){
return -EINVAL;
}
- if (output->paths & sm750_crt){
+ if (output->paths & sm750_crt) {
POKE32(CRT_DISPLAY_CTRL, FIELD_VALUE(PEEK32(CRT_DISPLAY_CTRL), CRT_DISPLAY_CTRL, DPMS, dpms));
POKE32(CRT_DISPLAY_CTRL, FIELD_VALUE(PEEK32(CRT_DISPLAY_CTRL), CRT_DISPLAY_CTRL, BLANK, crtdb));
}
@@ -535,13 +535,13 @@ int hw_sm750_setBLANK(struct lynxfb_output* output, int blank)
break;
}
- if (output->paths & sm750_crt){
+ if (output->paths & sm750_crt) {
POKE32(SYSTEM_CTRL, FIELD_VALUE(PEEK32(SYSTEM_CTRL), SYSTEM_CTRL, DPMS, dpms));
POKE32(CRT_DISPLAY_CTRL, FIELD_VALUE(PEEK32(CRT_DISPLAY_CTRL), CRT_DISPLAY_CTRL, BLANK, crtdb));
}
- if (output->paths & sm750_panel){
+ if (output->paths & sm750_panel) {
POKE32(PANEL_DISPLAY_CTRL, FIELD_VALUE(PEEK32(PANEL_DISPLAY_CTRL), PANEL_DISPLAY_CTRL, DATA, pps));
}
@@ -554,7 +554,7 @@ void hw_sm750_initAccel(struct lynx_share *share)
u32 reg;
enable2DEngine(1);
- if (getChipType() = SM750LE){
+ if (getChipType() = SM750LE) {
reg = PEEK32(DE_STATE1);
reg = FIELD_SET(reg, DE_STATE1, DE_ABORT, ON);
POKE32(DE_STATE1, reg);
@@ -563,7 +563,7 @@ void hw_sm750_initAccel(struct lynx_share *share)
reg = FIELD_SET(reg, DE_STATE1, DE_ABORT, OFF);
POKE32(DE_STATE1, reg);
- }else{
+ }else {
/* engine reset */
reg = PEEK32(SYSTEM_CTRL);
reg = FIELD_SET(reg, SYSTEM_CTRL, DE_ABORT, ON);
@@ -581,7 +581,7 @@ void hw_sm750_initAccel(struct lynx_share *share)
int hw_sm750le_deWait(void)
{
int i=0x10000000;
- while (i--){
+ while (i--) {
unsigned int dwVal = PEEK32(DE_STATE2);
if ((FIELD_GET(dwVal, DE_STATE2, DE_STATUS) = DE_STATE2_DE_STATUS_IDLE) &&
(FIELD_GET(dwVal, DE_STATE2, DE_FIFO) = DE_STATE2_DE_FIFO_EMPTY) &&
@@ -598,7 +598,7 @@ int hw_sm750le_deWait(void)
int hw_sm750_deWait(void)
{
int i=0x10000000;
- while (i--){
+ while (i--) {
unsigned int dwVal = PEEK32(SYSTEM_CTRL);
if ((FIELD_GET(dwVal, SYSTEM_CTRL, DE_STATUS) = SYSTEM_CTRL_DE_STATUS_IDLE) &&
(FIELD_GET(dwVal, SYSTEM_CTRL, DE_FIFO) = SYSTEM_CTRL_DE_FIFO_EMPTY) &&
--
2.4.4
^ permalink raw reply related [flat|nested] 31+ messages in thread* [PATCH v3 07/19] staging: sm750fb: add space after close brace
2015-06-24 16:20 [PATCH v3 00/19] staging: sm750fb: checkpatch.pl fixes Juston Li
` (5 preceding siblings ...)
2015-06-24 16:25 ` [PATCH v3 06/19] staging: sm750fb: add space before open brace Juston Li
@ 2015-06-24 16:25 ` Juston Li
2015-06-24 16:25 ` [PATCH v3 08/19] staging: sm750fb: add space after enum definition Juston Li
` (11 subsequent siblings)
18 siblings, 0 replies; 31+ messages in thread
From: Juston Li @ 2015-06-24 16:25 UTC (permalink / raw)
To: sudipm.mukherjee, teddy.wang, gregkh, linux-fbdev, devel,
linux-kernel, dan.carpenter
Cc: Juston Li
fixes checkpatch.pl error:
ERROR: space required after that close brace '}'
Signed-off-by: Juston Li <juston.h.li@gmail.com>
---
drivers/staging/sm750fb/ddk750_display.c | 2 +-
drivers/staging/sm750fb/ddk750_mode.c | 2 +-
drivers/staging/sm750fb/ddk750_power.c | 2 +-
drivers/staging/sm750fb/sm750.h | 2 +-
drivers/staging/sm750fb/sm750_cursor.c | 8 ++++----
drivers/staging/sm750fb/sm750_hw.c | 16 ++++++++--------
6 files changed, 16 insertions(+), 16 deletions(-)
diff --git a/drivers/staging/sm750fb/ddk750_display.c b/drivers/staging/sm750fb/ddk750_display.c
index c7171a4..4a3cb86 100644
--- a/drivers/staging/sm750fb/ddk750_display.c
+++ b/drivers/staging/sm750fb/ddk750_display.c
@@ -166,7 +166,7 @@ static void waitNextVerticalSync(int ctrl, int delay)
while (status = SYSTEM_CTRL_PANEL_VSYNC_INACTIVE);
}
- }else {
+ } else {
/* Do not wait when the Primary PLL is off or display control is already off.
This will prevent the software to wait forever. */
diff --git a/drivers/staging/sm750fb/ddk750_mode.c b/drivers/staging/sm750fb/ddk750_mode.c
index efc1fab..3d8b06d 100644
--- a/drivers/staging/sm750fb/ddk750_mode.c
+++ b/drivers/staging/sm750fb/ddk750_mode.c
@@ -109,7 +109,7 @@ static int programModeRegisters(mode_parameter_t *pModeParam, pll_value_t *pll)
if (getChipType() = SM750LE) {
displayControlAdjust_SM750LE(pModeParam, ulTmpValue);
- }else {
+ } else {
ulReg = PEEK32(CRT_DISPLAY_CTRL)
& FIELD_CLEAR(CRT_DISPLAY_CTRL, VSYNC_PHASE)
& FIELD_CLEAR(CRT_DISPLAY_CTRL, HSYNC_PHASE)
diff --git a/drivers/staging/sm750fb/ddk750_power.c b/drivers/staging/sm750fb/ddk750_power.c
index e2c0bb3..5f697b8 100644
--- a/drivers/staging/sm750fb/ddk750_power.c
+++ b/drivers/staging/sm750fb/ddk750_power.c
@@ -8,7 +8,7 @@ void ddk750_setDPMS(DPMS_t state)
if (getChipType() = SM750LE) {
value = PEEK32(CRT_DISPLAY_CTRL);
POKE32(CRT_DISPLAY_CTRL, FIELD_VALUE(value, CRT_DISPLAY_CTRL, DPMS, state));
- }else {
+ } else {
value = PEEK32(SYSTEM_CTRL);
value= FIELD_VALUE(value, SYSTEM_CTRL, DPMS, state);
POKE32(SYSTEM_CTRL, value);
diff --git a/drivers/staging/sm750fb/sm750.h b/drivers/staging/sm750fb/sm750.h
index bf894cc..3785afc 100644
--- a/drivers/staging/sm750fb/sm750.h
+++ b/drivers/staging/sm750fb/sm750.h
@@ -53,7 +53,7 @@ struct lynx_share{
int mtrr_off;
struct{
int vram;
- }mtrr;
+ } mtrr;
/* all smi graphic adaptor got below attributes */
unsigned long vidmem_start;
unsigned long vidreg_start;
diff --git a/drivers/staging/sm750fb/sm750_cursor.c b/drivers/staging/sm750fb/sm750_cursor.c
index 3a21af9..2fcec32 100644
--- a/drivers/staging/sm750fb/sm750_cursor.c
+++ b/drivers/staging/sm750fb/sm750_cursor.c
@@ -143,7 +143,7 @@ void hw_cursor_setData(struct lynx_cursor *cursor,
if (opr & (0x80 >> j))
{ /* use fg color,id = 2 */
data |= 2 << (j*2);
- }else {
+ } else {
/* use bg color,id = 1 */
data |= 1 << (j*2);
}
@@ -173,7 +173,7 @@ void hw_cursor_setData(struct lynx_cursor *cursor,
/* need a return */
pstart += offset;
pbuffer = pstart;
- }else {
+ } else {
pbuffer += sizeof(u16);
}
@@ -223,7 +223,7 @@ void hw_cursor_setData2(struct lynx_cursor *cursor,
if (opr & (0x80 >> j))
{ /* use fg color,id = 2 */
data |= 2 << (j*2);
- }else {
+ } else {
/* use bg color,id = 1 */
data |= 1 << (j*2);
}
@@ -242,7 +242,7 @@ void hw_cursor_setData2(struct lynx_cursor *cursor,
/* need a return */
pstart += offset;
pbuffer = pstart;
- }else {
+ } else {
pbuffer += sizeof(u16);
}
diff --git a/drivers/staging/sm750fb/sm750_hw.c b/drivers/staging/sm750fb/sm750_hw.c
index 4dfc6e6..a43f936 100644
--- a/drivers/staging/sm750fb/sm750_hw.c
+++ b/drivers/staging/sm750fb/sm750_hw.c
@@ -56,7 +56,7 @@ int hw_sm750_map(struct lynx_share* share, struct pci_dev* pdev)
pr_err("mmio failed\n");
ret = -EFAULT;
goto exit;
- }else {
+ } else {
pr_info("mmio virtual addr = %p\n", share->pvReg);
}
@@ -91,7 +91,7 @@ int hw_sm750_map(struct lynx_share* share, struct pci_dev* pdev)
pr_err("Map video memory failed\n");
ret = -EFAULT;
goto exit;
- }else {
+ } else {
pr_info("video memory vaddr = %p\n", share->pvMem);
}
exit:
@@ -143,7 +143,7 @@ int hw_sm750_inithw(struct lynx_share *share, struct pci_dev *pdev)
FIELD_SET(PEEK32(SYSTEM_CTRL),
SYSTEM_CTRL,
DPMS, VNHN));
- }else {
+ } else {
POKE32(MISC_CTRL,
FIELD_SET(PEEK32(MISC_CTRL),
MISC_CTRL,
@@ -166,7 +166,7 @@ int hw_sm750_inithw(struct lynx_share *share, struct pci_dev *pdev)
spec_share->state.pnltype));
break;
}
- }else {
+ } else {
/* for 750LE ,no DVI chip initilization makes Monitor no signal */
/* Set up GPIO for software I2C to program DVI chip in the
Xilinx SP605 board, in order to have video signal.
@@ -236,7 +236,7 @@ int hw_sm750_output_setMode(struct lynxfb_output* output,
if (output->paths & sm750_crt)
dispSet |= do_CRT_PRI;
- }else {
+ } else {
pr_info("secondary channel\n");
if (output->paths & sm750_panel)
dispSet |= do_LCD1_SEC;
@@ -245,7 +245,7 @@ int hw_sm750_output_setMode(struct lynxfb_output* output,
}
ddk750_setLogicalDispOut(dispSet);
- }else {
+ } else {
/* just open DISPLAY_CONTROL_750LE register bit 3:0*/
u32 reg;
reg = PEEK32(DISPLAY_CONTROL_750LE);
@@ -389,7 +389,7 @@ int hw_sm750_crtc_setMode(struct lynxfb_crtc* crtc,
PANEL_DISPLAY_CTRL, FORMAT,
(var->bits_per_pixel >> 4)
));
- }else {
+ } else {
/* not implemented now */
POKE32(CRT_FB_ADDRESS, crtc->oScreen);
reg = var->xres * (var->bits_per_pixel >> 3);
@@ -563,7 +563,7 @@ void hw_sm750_initAccel(struct lynx_share *share)
reg = FIELD_SET(reg, DE_STATE1, DE_ABORT, OFF);
POKE32(DE_STATE1, reg);
- }else {
+ } else {
/* engine reset */
reg = PEEK32(SYSTEM_CTRL);
reg = FIELD_SET(reg, SYSTEM_CTRL, DE_ABORT, ON);
--
2.4.4
^ permalink raw reply related [flat|nested] 31+ messages in thread* [PATCH v3 08/19] staging: sm750fb: add space after enum definition
2015-06-24 16:20 [PATCH v3 00/19] staging: sm750fb: checkpatch.pl fixes Juston Li
` (6 preceding siblings ...)
2015-06-24 16:25 ` [PATCH v3 07/19] staging: sm750fb: add space after close brace Juston Li
@ 2015-06-24 16:25 ` Juston Li
2015-06-24 16:25 ` [PATCH v3 09/19] staging: sm750fb: add space after struct definition Juston Li
` (10 subsequent siblings)
18 siblings, 0 replies; 31+ messages in thread
From: Juston Li @ 2015-06-24 16:25 UTC (permalink / raw)
To: sudipm.mukherjee, teddy.wang, gregkh, linux-fbdev, devel,
linux-kernel, dan.carpenter
Cc: Juston Li
fixes checkpatch.pl warning:
WARNING: missing space after enum definition
Signed-off-by: Juston Li <juston.h.li@gmail.com>
---
drivers/staging/sm750fb/ddk750_display.h | 2 +-
drivers/staging/sm750fb/sm750_hw.h | 8 ++++----
2 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/staging/sm750fb/ddk750_display.h b/drivers/staging/sm750fb/ddk750_display.h
index 018a661..a7f50cc 100644
--- a/drivers/staging/sm750fb/ddk750_display.h
+++ b/drivers/staging/sm750fb/ddk750_display.h
@@ -129,7 +129,7 @@ typedef enum _disp_output_t
}
disp_output_t;
#else
-typedef enum _disp_output_t{
+typedef enum _disp_output_t {
do_LCD1_PRI = PNL_2_PRI|PRI_TP_ON|PNL_SEQ_ON|DAC_ON,
do_LCD1_SEC = PNL_2_SEC|SEC_TP_ON|PNL_SEQ_ON|DAC_ON,
#if 0
diff --git a/drivers/staging/sm750fb/sm750_hw.h b/drivers/staging/sm750fb/sm750_hw.h
index adc61edf..af2db7c 100644
--- a/drivers/staging/sm750fb/sm750_hw.h
+++ b/drivers/staging/sm750fb/sm750_hw.h
@@ -9,7 +9,7 @@
#endif
-enum sm750_pnltype{
+enum sm750_pnltype {
sm750_24TFT = 0,/* 24bit tft */
@@ -19,7 +19,7 @@ enum sm750_pnltype{
};
/* vga channel is not concerned */
-enum sm750_dataflow{
+enum sm750_dataflow {
sm750_simul_pri,/* primary => all head */
sm750_simul_sec,/* secondary => all head */
@@ -30,13 +30,13 @@ enum sm750_dataflow{
};
-enum sm750_channel{
+enum sm750_channel {
sm750_primary = 0,
/* enum value equal to the register filed data */
sm750_secondary = 1,
};
-enum sm750_path{
+enum sm750_path {
sm750_panel = 1,
sm750_crt = 2,
sm750_pnc = 3,/* panel and crt */
--
2.4.4
^ permalink raw reply related [flat|nested] 31+ messages in thread* [PATCH v3 09/19] staging: sm750fb: add space after struct definition
2015-06-24 16:20 [PATCH v3 00/19] staging: sm750fb: checkpatch.pl fixes Juston Li
` (7 preceding siblings ...)
2015-06-24 16:25 ` [PATCH v3 08/19] staging: sm750fb: add space after enum definition Juston Li
@ 2015-06-24 16:25 ` Juston Li
2015-06-24 16:25 ` [PATCH v3 10/19] staging: sm750fb: add space after return type Juston Li
` (9 subsequent siblings)
18 siblings, 0 replies; 31+ messages in thread
From: Juston Li @ 2015-06-24 16:25 UTC (permalink / raw)
To: sudipm.mukherjee, teddy.wang, gregkh, linux-fbdev, devel,
linux-kernel, dan.carpenter
Cc: Juston Li
fixes checkpatch.pl warning:
WARNING: missing space after struct definition
Signed-off-by: Juston Li <juston.h.li@gmail.com>
---
drivers/staging/sm750fb/sm750.h | 12 ++++++------
drivers/staging/sm750fb/sm750_hw.h | 6 +++---
2 files changed, 9 insertions(+), 9 deletions(-)
diff --git a/drivers/staging/sm750fb/sm750.h b/drivers/staging/sm750fb/sm750.h
index 3785afc..124921e 100644
--- a/drivers/staging/sm750fb/sm750.h
+++ b/drivers/staging/sm750fb/sm750.h
@@ -14,7 +14,7 @@
extern int smi_indent;
-struct lynx_accel{
+struct lynx_accel {
/* base virtual address of DPR registers */
volatile unsigned char __iomem * dprBase;
/* base virtual address of de data port */
@@ -41,7 +41,7 @@ struct lynx_accel{
/* lynx_share stands for a presentation of two frame buffer
that use one smi adaptor , it is similar to a basic class of C++
*/
-struct lynx_share{
+struct lynx_share {
/* common members */
u16 devid;
u8 revid;
@@ -68,7 +68,7 @@ struct lynx_share{
void (*resume)(struct lynx_share*);
};
-struct lynx_cursor{
+struct lynx_cursor {
/* cursor width ,height and size */
int w;
int h;
@@ -92,7 +92,7 @@ struct lynx_cursor{
void (*setData)(struct lynx_cursor *, u16, const u8*, const u8*);
};
-struct lynxfb_crtc{
+struct lynxfb_crtc {
unsigned char __iomem *vCursor; /* virtual address of cursor */
unsigned char __iomem *vScreen; /* virtual address of on_screen */
int oCursor; /* cursor address offset in vidmem */
@@ -123,7 +123,7 @@ struct lynxfb_crtc{
struct lynx_cursor cursor;
};
-struct lynxfb_output{
+struct lynxfb_output {
int dpms;
int paths;
/* which paths(s) this output stands for,for sm750:
@@ -149,7 +149,7 @@ struct lynxfb_output{
void (*clear)(struct lynxfb_output*);
};
-struct lynxfb_par{
+struct lynxfb_par {
/* either 0 or 1 for dual head adaptor,0 is the older one registered */
int index;
unsigned int pseudo_palette[256];
diff --git a/drivers/staging/sm750fb/sm750_hw.h b/drivers/staging/sm750fb/sm750_hw.h
index af2db7c..ef0a16f 100644
--- a/drivers/staging/sm750fb/sm750_hw.h
+++ b/drivers/staging/sm750fb/sm750_hw.h
@@ -42,7 +42,7 @@ enum sm750_path {
sm750_pnc = 3,/* panel and crt */
};
-struct init_status{
+struct init_status {
ushort powerMode;
/* below three clocks are in unit of MHZ*/
ushort chip_clk;
@@ -52,7 +52,7 @@ struct init_status{
ushort resetMemory;
};
-struct sm750_state{
+struct sm750_state {
struct init_status initParm;
enum sm750_pnltype pnltype;
enum sm750_dataflow dataflow;
@@ -66,7 +66,7 @@ struct sm750_state{
in C++
*/
-struct sm750_share{
+struct sm750_share {
/* it's better to put lynx_share struct to the first place of sm750_share */
struct lynx_share share;
struct sm750_state state;
--
2.4.4
^ permalink raw reply related [flat|nested] 31+ messages in thread* [PATCH v3 10/19] staging: sm750fb: add space after return type
2015-06-24 16:20 [PATCH v3 00/19] staging: sm750fb: checkpatch.pl fixes Juston Li
` (8 preceding siblings ...)
2015-06-24 16:25 ` [PATCH v3 09/19] staging: sm750fb: add space after struct definition Juston Li
@ 2015-06-24 16:25 ` Juston Li
2015-06-24 16:25 ` [PATCH v3 11/19] staging: sm750fb: consistent spacing around operators Juston Li
` (8 subsequent siblings)
18 siblings, 0 replies; 31+ messages in thread
From: Juston Li @ 2015-06-24 16:25 UTC (permalink / raw)
To: sudipm.mukherjee, teddy.wang, gregkh, linux-fbdev, devel,
linux-kernel, dan.carpenter
Cc: Juston Li
fixes checkpatch.pl warning:
WARNING: missing space after return type
Signed-off-by: Juston Li <juston.h.li@gmail.com>
---
drivers/staging/sm750fb/sm750.h | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/staging/sm750fb/sm750.h b/drivers/staging/sm750fb/sm750.h
index 124921e..320908bc 100644
--- a/drivers/staging/sm750fb/sm750.h
+++ b/drivers/staging/sm750fb/sm750.h
@@ -108,12 +108,12 @@ struct lynxfb_crtc {
void *priv;
- int(*proc_setMode)(struct lynxfb_crtc*,
+ int (*proc_setMode)(struct lynxfb_crtc*,
struct fb_var_screeninfo*,
struct fb_fix_screeninfo*);
- int(*proc_checkMode)(struct lynxfb_crtc*, struct fb_var_screeninfo*);
- int(*proc_setColReg)(struct lynxfb_crtc*, ushort, ushort, ushort, ushort);
+ int (*proc_checkMode)(struct lynxfb_crtc*, struct fb_var_screeninfo*);
+ int (*proc_setColReg)(struct lynxfb_crtc*, ushort, ushort, ushort, ushort);
void (*clear)(struct lynxfb_crtc*);
/* pan display */
int (*proc_panDisplay)(struct lynxfb_crtc *,
@@ -140,12 +140,12 @@ struct lynxfb_output {
*/
void *priv;
- int(*proc_setMode)(struct lynxfb_output*,
+ int (*proc_setMode)(struct lynxfb_output*,
struct fb_var_screeninfo*,
struct fb_fix_screeninfo*);
- int(*proc_checkMode)(struct lynxfb_output*, struct fb_var_screeninfo*);
- int(*proc_setBLANK)(struct lynxfb_output*, int);
+ int (*proc_checkMode)(struct lynxfb_output*, struct fb_var_screeninfo*);
+ int (*proc_setBLANK)(struct lynxfb_output*, int);
void (*clear)(struct lynxfb_output*);
};
--
2.4.4
^ permalink raw reply related [flat|nested] 31+ messages in thread* [PATCH v3 11/19] staging: sm750fb: consistent spacing around operators
2015-06-24 16:20 [PATCH v3 00/19] staging: sm750fb: checkpatch.pl fixes Juston Li
` (9 preceding siblings ...)
2015-06-24 16:25 ` [PATCH v3 10/19] staging: sm750fb: add space after return type Juston Li
@ 2015-06-24 16:25 ` Juston Li
2015-06-25 11:56 ` Sudip Mukherjee
2015-06-24 16:25 ` [PATCH v3 12/19] staging: sm750fb: add spaces " Juston Li
` (7 subsequent siblings)
18 siblings, 1 reply; 31+ messages in thread
From: Juston Li @ 2015-06-24 16:25 UTC (permalink / raw)
To: sudipm.mukherjee, teddy.wang, gregkh, linux-fbdev, devel,
linux-kernel, dan.carpenter
Cc: Juston Li
fixes checkpatch.pl error:
ERROR: need consistent spacing around ''
Signed-off-by: Juston Li <juston.h.li@gmail.com>
---
drivers/staging/sm750fb/ddk750_chip.c | 4 ++--
drivers/staging/sm750fb/ddk750_display.h | 4 ++--
drivers/staging/sm750fb/sm750.h | 2 +-
drivers/staging/sm750fb/sm750_hw.c | 4 ++--
4 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/staging/sm750fb/ddk750_chip.c b/drivers/staging/sm750fb/ddk750_chip.c
index fb1c533..633201e 100644
--- a/drivers/staging/sm750fb/ddk750_chip.c
+++ b/drivers/staging/sm750fb/ddk750_chip.c
@@ -464,7 +464,7 @@ unsigned int calcPllValue(unsigned int request_orig, pll_value_t *pll)
RN = N * request;
quo = RN / input;
rem = RN % input;/* rem always small than 14318181 */
- fl_quo = (rem * 10000 /input);
+ fl_quo = (rem * 10000 / input);
for (d = xcnt - 1; d >= 0; d--) {
X = xparm[d].value;
@@ -474,7 +474,7 @@ unsigned int calcPllValue(unsigned int request_orig, pll_value_t *pll)
M += (fl_quo*X % 10000)>5000?1:0;
if (M < 256 && M > 0) {
unsigned int diff;
- tmpClock = pll->inputFreq *M / N / X;
+ tmpClock = pll->inputFreq * M / N / X;
diff = absDiff(tmpClock, request_orig);
if (diff < miniDiff) {
pll->M = M;
diff --git a/drivers/staging/sm750fb/ddk750_display.h b/drivers/staging/sm750fb/ddk750_display.h
index a7f50cc..afdf201 100644
--- a/drivers/staging/sm750fb/ddk750_display.h
+++ b/drivers/staging/sm750fb/ddk750_display.h
@@ -46,7 +46,7 @@
0: both off
*/
#define SEC_TP_OFFSET 5
-#define SEC_TP_MASK (1<< SEC_TP_OFFSET)
+#define SEC_TP_MASK (1 << SEC_TP_OFFSET)
#define SEC_TP_USAGE (SEC_TP_MASK << 16)
#define SEC_TP_ON ((0x1 << SEC_TP_OFFSET)|SEC_TP_USAGE)
#define SEC_TP_OFF ((0x0 << SEC_TP_OFFSET)|SEC_TP_USAGE)
@@ -67,7 +67,7 @@
#define DAC_OFFSET 7
#define DAC_MASK (1 << DAC_OFFSET)
#define DAC_USAGE (DAC_MASK << 16)
-#define DAC_ON ((0x0<< DAC_OFFSET)|DAC_USAGE)
+#define DAC_ON ((0x0 << DAC_OFFSET)|DAC_USAGE)
#define DAC_OFF ((0x1 << DAC_OFFSET)|DAC_USAGE)
/* DPMS only affect D-SUB head
diff --git a/drivers/staging/sm750fb/sm750.h b/drivers/staging/sm750fb/sm750.h
index 320908bc..b0ff0b5 100644
--- a/drivers/staging/sm750fb/sm750.h
+++ b/drivers/staging/sm750fb/sm750.h
@@ -10,7 +10,7 @@
#define MB(x) ((x)<<20)
#define MHZ(x) ((x) * 1000000)
/* align should be 2,4,8,16 */
-#define PADDING(align, data) (((data)+(align)-1)&(~((align) -1)))
+#define PADDING(align, data) (((data)+(align)-1)&(~((align) - 1)))
extern int smi_indent;
diff --git a/drivers/staging/sm750fb/sm750_hw.c b/drivers/staging/sm750fb/sm750_hw.c
index a43f936..7a5d522 100644
--- a/drivers/staging/sm750fb/sm750_hw.c
+++ b/drivers/staging/sm750fb/sm750_hw.c
@@ -330,7 +330,7 @@ int hw_sm750_crtc_setMode(struct lynxfb_crtc* crtc,
modparm.pixel_clock = ps_to_hz(var->pixclock);
modparm.vertical_sync_polarity = (var->sync & FB_SYNC_HOR_HIGH_ACT) ? POS:NEG;
modparm.horizontal_sync_polarity = (var->sync & FB_SYNC_VERT_HIGH_ACT) ? POS:NEG;
- modparm.clock_phase_polarity = (var->sync& FB_SYNC_COMP_HIGH_ACT) ? POS:NEG;
+ modparm.clock_phase_polarity = (var->sync & FB_SYNC_COMP_HIGH_ACT) ? POS:NEG;
modparm.horizontal_display_end = var->xres;
modparm.horizontal_sync_width = var->hsync_len;
modparm.horizontal_sync_start = var->xres + var->right_margin;
@@ -369,7 +369,7 @@ int hw_sm750_crtc_setMode(struct lynxfb_crtc* crtc,
FIELD_VALUE(0, PANEL_FB_WIDTH, OFFSET, fix->line_length));
POKE32(PANEL_WINDOW_WIDTH,
- FIELD_VALUE(0, PANEL_WINDOW_WIDTH, WIDTH, var->xres -1)|
+ FIELD_VALUE(0, PANEL_WINDOW_WIDTH, WIDTH, var->xres - 1)|
FIELD_VALUE(0, PANEL_WINDOW_WIDTH, X, var->xoffset));
POKE32(PANEL_WINDOW_HEIGHT,
--
2.4.4
^ permalink raw reply related [flat|nested] 31+ messages in thread* Re: [PATCH v3 11/19] staging: sm750fb: consistent spacing around operators
2015-06-24 16:25 ` [PATCH v3 11/19] staging: sm750fb: consistent spacing around operators Juston Li
@ 2015-06-25 11:56 ` Sudip Mukherjee
2015-06-25 16:26 ` Juston Li
0 siblings, 1 reply; 31+ messages in thread
From: Sudip Mukherjee @ 2015-06-25 11:56 UTC (permalink / raw)
To: Juston Li
Cc: teddy.wang, gregkh, linux-fbdev, devel, linux-kernel,
dan.carpenter
On Wed, Jun 24, 2015 at 09:25:12AM -0700, Juston Li wrote:
> fixes checkpatch.pl error:
> ERROR: need consistent spacing around ''
little bit confused.
1) Your subject says consistent space around operators but here it says
around ''
2) Considering that you are giving consitent space around operators, then
i think you have missed few operators like '|','&',':' in this
patch.
regards
sudip
^ permalink raw reply [flat|nested] 31+ messages in thread
* Re: [PATCH v3 11/19] staging: sm750fb: consistent spacing around operators
2015-06-25 11:56 ` Sudip Mukherjee
@ 2015-06-25 16:26 ` Juston Li
2015-06-26 4:17 ` Sudip Mukherjee
0 siblings, 1 reply; 31+ messages in thread
From: Juston Li @ 2015-06-25 16:26 UTC (permalink / raw)
To: Sudip Mukherjee
Cc: teddy.wang, Greg KH, linux-fbdev, devel, linux-kernel,
Dan Carpenter
On Thu, Jun 25, 2015 at 4:56 AM, Sudip Mukherjee
<sudipm.mukherjee@gmail.com> wrote:
> On Wed, Jun 24, 2015 at 09:25:12AM -0700, Juston Li wrote:
>> fixes checkpatch.pl error:
>> ERROR: need consistent spacing around ''
> little bit confused.
> 1) Your subject says consistent space around operators but here it says
> around ''
The specific checkpatch.pl error was different for each error, the quotes
were suppose to contain the specific operator but I left it out so that there
would be one generic error message. The quotes left behind were confusing,
sorry.
> 2) Considering that you are giving consitent space around operators, then
> i think you have missed few operators like '|','&',':' in this
> patch.
>
These were the only instances the checkpatch.pl error came up. This patch
only fixes even spacing around a specific operator. Other operators either
have even or no spacing around them with PATCH 11/19 fixing any operators
with spacing around required. This leaves operators that checkpatch deems
spacing as optional which I left as a separate issue to be addressed of making
optional spacing of operators consistent with each other.
Thanks
Juston
^ permalink raw reply [flat|nested] 31+ messages in thread
* Re: [PATCH v3 11/19] staging: sm750fb: consistent spacing around operators
2015-06-25 16:26 ` Juston Li
@ 2015-06-26 4:17 ` Sudip Mukherjee
2015-06-26 4:14 ` Juston Li
0 siblings, 1 reply; 31+ messages in thread
From: Sudip Mukherjee @ 2015-06-26 4:17 UTC (permalink / raw)
To: Juston Li
Cc: teddy.wang, Greg KH, linux-fbdev, devel, linux-kernel,
Dan Carpenter
On Thu, Jun 25, 2015 at 09:26:00AM -0700, Juston Li wrote:
> On Thu, Jun 25, 2015 at 4:56 AM, Sudip Mukherjee
> <sudipm.mukherjee@gmail.com> wrote:
> > On Wed, Jun 24, 2015 at 09:25:12AM -0700, Juston Li wrote:
<snip>
>
> > 2) Considering that you are giving consitent space around operators, then
> > i think you have missed few operators like '|','&',':' in this
> > patch.
> >
>
> These were the only instances the checkpatch.pl error came up. This patch
> only fixes even spacing around a specific operator. Other operators either
> have even or no spacing around them with PATCH 11/19 fixing any operators
> with spacing around required. This leaves operators that checkpatch deems
> spacing as optional which I left as a separate issue to be addressed of making
> optional spacing of operators consistent with each other.
Usually I use the checkpatch which is in linux-next. That will be the
latest version. If you compare, last commit on checkpatch of staging
tree was on April 16th, where as last commit in linux-next is on
June 19th. And if you use this checkpatch you will see these warnings
also. :)
regards
sudip
^ permalink raw reply [flat|nested] 31+ messages in thread
* Re: [PATCH v3 11/19] staging: sm750fb: consistent spacing around operators
2015-06-26 4:17 ` Sudip Mukherjee
@ 2015-06-26 4:14 ` Juston Li
2015-06-26 5:53 ` Juston Li
0 siblings, 1 reply; 31+ messages in thread
From: Juston Li @ 2015-06-26 4:14 UTC (permalink / raw)
To: Sudip Mukherjee
Cc: teddy.wang, Greg KH, linux-fbdev, devel, linux-kernel,
Dan Carpenter
On Thu, Jun 25, 2015 at 9:05 PM, Sudip Mukherjee
<sudipm.mukherjee@gmail.com> wrote:
> Usually I use the checkpatch which is in linux-next. That will be the
> latest version. If you compare, last commit on checkpatch of staging
> tree was on April 16th, where as last commit in linux-next is on
> June 19th. And if you use this checkpatch you will see these warnings
> also. :)
Thanks for the tip, I'll use the latest checkpatch and fix the warnings.
Your help has been much appreciated
Regards
Juston
^ permalink raw reply [flat|nested] 31+ messages in thread
* Re: [PATCH v3 11/19] staging: sm750fb: consistent spacing around operators
2015-06-26 4:14 ` Juston Li
@ 2015-06-26 5:53 ` Juston Li
2015-06-30 7:47 ` Sudip Mukherjee
0 siblings, 1 reply; 31+ messages in thread
From: Juston Li @ 2015-06-26 5:53 UTC (permalink / raw)
To: Sudip Mukherjee
Cc: teddy.wang, Greg KH, linux-fbdev, devel, linux-kernel,
Dan Carpenter
On Thu, Jun 25, 2015 at 9:05 PM, Sudip Mukherjee
<sudipm.mukherjee@gmail.com> wrote:
> Usually I use the checkpatch which is in linux-next. That will be the
> latest version. If you compare, last commit on checkpatch of staging
> tree was on April 16th, where as last commit in linux-next is on
> June 19th. And if you use this checkpatch you will see these warnings
> also. :)
Just wanted to clarify. So even with the linux-next checkpatch.pl, no
errors/warnings show for me. Only when I run checkpatch.pl with the
'--strict' option does it give the following checks for various operators:
CHECK: space preferred before that '|' (ctx:VxE)
Are these the warnings you are referring too? Do you want me to fix all
of these for this patch?
Regards
Juston
^ permalink raw reply [flat|nested] 31+ messages in thread
* Re: [PATCH v3 11/19] staging: sm750fb: consistent spacing around operators
2015-06-26 5:53 ` Juston Li
@ 2015-06-30 7:47 ` Sudip Mukherjee
0 siblings, 0 replies; 31+ messages in thread
From: Sudip Mukherjee @ 2015-06-30 7:47 UTC (permalink / raw)
To: Juston Li
Cc: teddy.wang, Greg KH, linux-fbdev, devel, linux-kernel,
Dan Carpenter
On Thu, Jun 25, 2015 at 10:53:33PM -0700, Juston Li wrote:
> On Thu, Jun 25, 2015 at 9:05 PM, Sudip Mukherjee
> <sudipm.mukherjee@gmail.com> wrote:
> > Usually I use the checkpatch which is in linux-next. That will be the
> > latest version. If you compare, last commit on checkpatch of staging
> > tree was on April 16th, where as last commit in linux-next is on
> > June 19th. And if you use this checkpatch you will see these warnings
> > also. :)
>
> Just wanted to clarify. So even with the linux-next checkpatch.pl, no
> errors/warnings show for me. Only when I run checkpatch.pl with the
> '--strict' option does it give the following checks for various operators:
> CHECK: space preferred before that '|' (ctx:VxE)
>
> Are these the warnings you are referring too? Do you want me to fix all
> of these for this patch?
Hi,
Sorry for the late reply, was a bit busy.
since your commit message was saying "spacing around operators"
and you were fixing the spacing around all types of operators so there
is no point leaving few not fixed on the same line.
But anyways, since you have already sent new series, its ok.
regards
sudip
^ permalink raw reply [flat|nested] 31+ messages in thread
* [PATCH v3 12/19] staging: sm750fb: add spaces around operators
2015-06-24 16:20 [PATCH v3 00/19] staging: sm750fb: checkpatch.pl fixes Juston Li
` (10 preceding siblings ...)
2015-06-24 16:25 ` [PATCH v3 11/19] staging: sm750fb: consistent spacing around operators Juston Li
@ 2015-06-24 16:25 ` Juston Li
2015-06-24 16:25 ` [PATCH v3 13/19] staging: sm750fb: add space after semicolon Juston Li
` (6 subsequent siblings)
18 siblings, 0 replies; 31+ messages in thread
From: Juston Li @ 2015-06-24 16:25 UTC (permalink / raw)
To: sudipm.mukherjee, teddy.wang, gregkh, linux-fbdev, devel,
linux-kernel, dan.carpenter
Cc: Juston Li
fixes checkpath.pl error:
ERROR: spaces required around that ''
Signed-off-by: Juston Li <juston.h.li@gmail.com>
---
drivers/staging/sm750fb/ddk750_chip.c | 2 +-
drivers/staging/sm750fb/ddk750_power.c | 2 +-
drivers/staging/sm750fb/sm750.h | 2 +-
drivers/staging/sm750fb/sm750_accel.c | 4 ++--
drivers/staging/sm750fb/sm750_cursor.c | 12 ++++++------
drivers/staging/sm750fb/sm750_help.h | 2 +-
drivers/staging/sm750fb/sm750_hw.c | 8 ++++----
7 files changed, 16 insertions(+), 16 deletions(-)
diff --git a/drivers/staging/sm750fb/ddk750_chip.c b/drivers/staging/sm750fb/ddk750_chip.c
index 633201e..d7435d7 100644
--- a/drivers/staging/sm750fb/ddk750_chip.c
+++ b/drivers/staging/sm750fb/ddk750_chip.c
@@ -471,7 +471,7 @@ unsigned int calcPllValue(unsigned int request_orig, pll_value_t *pll)
M = quo*X;
M += fl_quo * X / 10000;
/* round step */
- M += (fl_quo*X % 10000)>5000?1:0;
+ M += (fl_quo*X % 10000) > 5000?1:0;
if (M < 256 && M > 0) {
unsigned int diff;
tmpClock = pll->inputFreq * M / N / X;
diff --git a/drivers/staging/sm750fb/ddk750_power.c b/drivers/staging/sm750fb/ddk750_power.c
index 5f697b8..28d4402 100644
--- a/drivers/staging/sm750fb/ddk750_power.c
+++ b/drivers/staging/sm750fb/ddk750_power.c
@@ -10,7 +10,7 @@ void ddk750_setDPMS(DPMS_t state)
POKE32(CRT_DISPLAY_CTRL, FIELD_VALUE(value, CRT_DISPLAY_CTRL, DPMS, state));
} else {
value = PEEK32(SYSTEM_CTRL);
- value= FIELD_VALUE(value, SYSTEM_CTRL, DPMS, state);
+ value = FIELD_VALUE(value, SYSTEM_CTRL, DPMS, state);
POKE32(SYSTEM_CTRL, value);
}
}
diff --git a/drivers/staging/sm750fb/sm750.h b/drivers/staging/sm750fb/sm750.h
index b0ff0b5..4f56dcb 100644
--- a/drivers/staging/sm750fb/sm750.h
+++ b/drivers/staging/sm750fb/sm750.h
@@ -172,7 +172,7 @@ struct lynxfb_par {
static inline unsigned long ps_to_hz(unsigned int psvalue)
{
- unsigned long long numerator\x1000*1000*1000*1000ULL;
+ unsigned long long numerator = 1000*1000*1000*1000ULL;
/* 10^12 / picosecond period gives frequency in Hz */
do_div(numerator, psvalue);
return (unsigned long)numerator;
diff --git a/drivers/staging/sm750fb/sm750_accel.c b/drivers/staging/sm750fb/sm750_accel.c
index 25dc15b..2ea447e 100644
--- a/drivers/staging/sm750fb/sm750_accel.c
+++ b/drivers/staging/sm750fb/sm750_accel.c
@@ -414,10 +414,10 @@ int hw_imageblit(struct lynx_accel *accel,
write_dpr(accel, DE_CONTROL, de_ctrl | deGetTransparency(accel));
/* Write MONO data (line by line) to 2D Engine data port */
- for (i=0; i<height; i++)
+ for (i = 0; i < height; i++)
{
/* For each line, send the data in chunks of 4 bytes */
- for (j=0; j<(ul4BytesPerScan/4); j++)
+ for (j = 0; j < (ul4BytesPerScan/4); j++)
{
write_dpPort(accel, *(unsigned int *)(pSrcbuf + (j * 4)));
}
diff --git a/drivers/staging/sm750fb/sm750_cursor.c b/drivers/staging/sm750fb/sm750_cursor.c
index 2fcec32..9dabac1 100644
--- a/drivers/staging/sm750fb/sm750_cursor.c
+++ b/drivers/staging/sm750fb/sm750_cursor.c
@@ -122,7 +122,7 @@ void hw_cursor_setData(struct lynx_cursor *cursor,
odd=0;
*/
- for (i=0;i<count;i++)
+ for (i = 0;i < count;i++)
{
color = *pcol++;
mask = *pmsk++;
@@ -137,7 +137,7 @@ void hw_cursor_setData(struct lynx_cursor *cursor,
else
opr = mask & color;
- for (j=0;j<8;j++)
+ for (j = 0;j < 8;j++)
{
if (opr & (0x80 >> j))
@@ -149,7 +149,7 @@ void hw_cursor_setData(struct lynx_cursor *cursor,
}
}
#else
- for (j=0;j<8;j++) {
+ for (j = 0;j < 8;j++) {
if (mask & (0x80>>j)) {
if (rop = ROP_XOR)
opr = mask ^ color;
@@ -204,7 +204,7 @@ void hw_cursor_setData2(struct lynx_cursor *cursor,
pstart = cursor->vstart;
pbuffer = pstart;
- for (i=0;i<count;i++)
+ for (i = 0;i < count;i++)
{
color = *pcol++;
mask = *pmsk++;
@@ -217,7 +217,7 @@ void hw_cursor_setData2(struct lynx_cursor *cursor,
else
opr = mask & color;
- for (j=0;j<8;j++)
+ for (j = 0;j < 8;j++)
{
if (opr & (0x80 >> j))
@@ -229,7 +229,7 @@ void hw_cursor_setData2(struct lynx_cursor *cursor,
}
}
#else
- for (j=0;j<8;j++) {
+ for (j = 0;j < 8;j++) {
if (mask & (1<<j))
data |= ((color & (1<<j))?1:2)<<(j*2);
}
diff --git a/drivers/staging/sm750fb/sm750_help.h b/drivers/staging/sm750fb/sm750_help.h
index 493af3a..e7d74e6 100644
--- a/drivers/staging/sm750fb/sm750_help.h
+++ b/drivers/staging/sm750fb/sm750_help.h
@@ -73,7 +73,7 @@
static inline unsigned int absDiff(unsigned int a, unsigned int b)
{
- if (a<b)
+ if (a < b)
return b-a;
else
return a-b;
diff --git a/drivers/staging/sm750fb/sm750_hw.c b/drivers/staging/sm750fb/sm750_hw.c
index 7a5d522..4941e2a 100644
--- a/drivers/staging/sm750fb/sm750_hw.c
+++ b/drivers/staging/sm750fb/sm750_hw.c
@@ -108,7 +108,7 @@ int hw_sm750_inithw(struct lynx_share *share, struct pci_dev *pdev)
spec_share = container_of(share, struct sm750_share, share);
parm = &spec_share->state.initParm;
if (parm->chip_clk = 0)
- parm->chip_clk = (getChipType() = SM750LE)?
+ parm->chip_clk = (getChipType() = SM750LE) ?
DEFAULT_SM750LE_CHIP_CLOCK :
DEFAULT_SM750_CHIP_CLOCK;
@@ -421,7 +421,7 @@ void hw_sm750_crtc_clear(struct lynxfb_crtc* crtc)
int hw_sm750_setColReg(struct lynxfb_crtc* crtc, ushort index,
ushort red, ushort green, ushort blue)
{
- static unsigned int add[]={PANEL_PALETTE_RAM, CRT_PALETTE_RAM};
+ static unsigned int add[] = {PANEL_PALETTE_RAM, CRT_PALETTE_RAM};
POKE32(add[crtc->channel] + index*4, (red<<16)|(green<<8)|blue);
return 0;
}
@@ -580,7 +580,7 @@ void hw_sm750_initAccel(struct lynx_share *share)
int hw_sm750le_deWait(void)
{
- int i=0x10000000;
+ int i = 0x10000000;
while (i--) {
unsigned int dwVal = PEEK32(DE_STATE2);
if ((FIELD_GET(dwVal, DE_STATE2, DE_STATUS) = DE_STATE2_DE_STATUS_IDLE) &&
@@ -597,7 +597,7 @@ int hw_sm750le_deWait(void)
int hw_sm750_deWait(void)
{
- int i=0x10000000;
+ int i = 0x10000000;
while (i--) {
unsigned int dwVal = PEEK32(SYSTEM_CTRL);
if ((FIELD_GET(dwVal, SYSTEM_CTRL, DE_STATUS) = SYSTEM_CTRL_DE_STATUS_IDLE) &&
--
2.4.4
^ permalink raw reply related [flat|nested] 31+ messages in thread* [PATCH v3 13/19] staging: sm750fb: add space after semicolon
2015-06-24 16:20 [PATCH v3 00/19] staging: sm750fb: checkpatch.pl fixes Juston Li
` (11 preceding siblings ...)
2015-06-24 16:25 ` [PATCH v3 12/19] staging: sm750fb: add spaces " Juston Li
@ 2015-06-24 16:25 ` Juston Li
2015-06-24 16:25 ` [PATCH v3 14/19] staging: sm750fb: remove trailing whitespace Juston Li
` (5 subsequent siblings)
18 siblings, 0 replies; 31+ messages in thread
From: Juston Li @ 2015-06-24 16:25 UTC (permalink / raw)
To: sudipm.mukherjee, teddy.wang, gregkh, linux-fbdev, devel,
linux-kernel, dan.carpenter
Cc: Juston Li
fixes checkpatch.pl error:
ERROR: space required after that ';'
Signed-off-by: Juston Li <juston.h.li@gmail.com>
---
drivers/staging/sm750fb/sm750.h | 2 +-
drivers/staging/sm750fb/sm750_cursor.c | 12 ++++++------
2 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/staging/sm750fb/sm750.h b/drivers/staging/sm750fb/sm750.h
index 4f56dcb..2bcd65d 100644
--- a/drivers/staging/sm750fb/sm750.h
+++ b/drivers/staging/sm750fb/sm750.h
@@ -168,7 +168,7 @@ struct lynxfb_par {
({ \
unsigned long long hz = 1000*1000*1000*1000ULL; \
do_div(hz, ps); \
- (unsigned long)hz;})
+ (unsigned long)hz; })
static inline unsigned long ps_to_hz(unsigned int psvalue)
{
diff --git a/drivers/staging/sm750fb/sm750_cursor.c b/drivers/staging/sm750fb/sm750_cursor.c
index 9dabac1..4ed7ca2 100644
--- a/drivers/staging/sm750fb/sm750_cursor.c
+++ b/drivers/staging/sm750fb/sm750_cursor.c
@@ -122,7 +122,7 @@ void hw_cursor_setData(struct lynx_cursor *cursor,
odd=0;
*/
- for (i = 0;i < count;i++)
+ for (i = 0; i < count; i++)
{
color = *pcol++;
mask = *pmsk++;
@@ -137,7 +137,7 @@ void hw_cursor_setData(struct lynx_cursor *cursor,
else
opr = mask & color;
- for (j = 0;j < 8;j++)
+ for (j = 0; j < 8; j++)
{
if (opr & (0x80 >> j))
@@ -149,7 +149,7 @@ void hw_cursor_setData(struct lynx_cursor *cursor,
}
}
#else
- for (j = 0;j < 8;j++) {
+ for (j = 0; j < 8; j++) {
if (mask & (0x80>>j)) {
if (rop = ROP_XOR)
opr = mask ^ color;
@@ -204,7 +204,7 @@ void hw_cursor_setData2(struct lynx_cursor *cursor,
pstart = cursor->vstart;
pbuffer = pstart;
- for (i = 0;i < count;i++)
+ for (i = 0; i < count; i++)
{
color = *pcol++;
mask = *pmsk++;
@@ -217,7 +217,7 @@ void hw_cursor_setData2(struct lynx_cursor *cursor,
else
opr = mask & color;
- for (j = 0;j < 8;j++)
+ for (j = 0; j < 8; j++)
{
if (opr & (0x80 >> j))
@@ -229,7 +229,7 @@ void hw_cursor_setData2(struct lynx_cursor *cursor,
}
}
#else
- for (j = 0;j < 8;j++) {
+ for (j = 0; j < 8; j++) {
if (mask & (1<<j))
data |= ((color & (1<<j))?1:2)<<(j*2);
}
--
2.4.4
^ permalink raw reply related [flat|nested] 31+ messages in thread* [PATCH v3 14/19] staging: sm750fb: remove trailing whitespace
2015-06-24 16:20 [PATCH v3 00/19] staging: sm750fb: checkpatch.pl fixes Juston Li
` (12 preceding siblings ...)
2015-06-24 16:25 ` [PATCH v3 13/19] staging: sm750fb: add space after semicolon Juston Li
@ 2015-06-24 16:25 ` Juston Li
2015-06-24 16:25 ` [PATCH v3 15/19] staging: sm750fb: remove unnecessary whitespace Juston Li
` (4 subsequent siblings)
18 siblings, 0 replies; 31+ messages in thread
From: Juston Li @ 2015-06-24 16:25 UTC (permalink / raw)
To: sudipm.mukherjee, teddy.wang, gregkh, linux-fbdev, devel,
linux-kernel, dan.carpenter
Cc: Juston Li
fixes checkpatch.pl error:
ERROR: trailing whitespace
Signed-off-by: Juston Li <juston.h.li@gmail.com>
---
drivers/staging/sm750fb/ddk750_dvi.c | 2 +-
drivers/staging/sm750fb/sm750_accel.c | 4 ++--
drivers/staging/sm750fb/sm750_hw.c | 24 ++++++++++++------------
3 files changed, 15 insertions(+), 15 deletions(-)
diff --git a/drivers/staging/sm750fb/ddk750_dvi.c b/drivers/staging/sm750fb/ddk750_dvi.c
index 4c64436..c42db85 100644
--- a/drivers/staging/sm750fb/ddk750_dvi.c
+++ b/drivers/staging/sm750fb/ddk750_dvi.c
@@ -1,4 +1,4 @@
-#define USE_DVICHIP
+#define USE_DVICHIP
#ifdef USE_DVICHIP
#include "ddk750_help.h"
#include "ddk750_reg.h"
diff --git a/drivers/staging/sm750fb/sm750_accel.c b/drivers/staging/sm750fb/sm750_accel.c
index 2ea447e..866bb99 100644
--- a/drivers/staging/sm750fb/sm750_accel.c
+++ b/drivers/staging/sm750fb/sm750_accel.c
@@ -37,7 +37,7 @@ void hw_de_init(struct lynx_accel *accel)
{
/* setup 2d engine registers */
u32 reg, clr;
-
+
write_dpr(accel, DE_MASKS, 0xFFFFFFFF);
/* dpr1c */
@@ -82,7 +82,7 @@ void hw_de_init(struct lynx_accel *accel)
void hw_set2dformat(struct lynx_accel *accel, int fmt)
{
u32 reg;
-
+
/* fmt=0,1,2 for 8,16,32,bpp on sm718/750/502 */
reg = read_dpr(accel, DE_STRETCH_FORMAT);
reg = FIELD_VALUE(reg, DE_STRETCH_FORMAT, PIXEL_FORMAT, fmt);
diff --git a/drivers/staging/sm750fb/sm750_hw.c b/drivers/staging/sm750fb/sm750_hw.c
index 4941e2a..3b8107c 100644
--- a/drivers/staging/sm750fb/sm750_hw.c
+++ b/drivers/staging/sm750fb/sm750_hw.c
@@ -28,7 +28,7 @@ int hw_sm750_map(struct lynx_share* share, struct pci_dev* pdev)
{
int ret;
struct sm750_share *spec_share;
-
+
spec_share = container_of(share, struct sm750_share, share);
ret = 0;
@@ -60,7 +60,7 @@ int hw_sm750_map(struct lynx_share* share, struct pci_dev* pdev)
pr_info("mmio virtual addr = %p\n", share->pvReg);
}
-
+
share->accel.dprBase = share->pvReg + DE_BASE_ADDR_TYPE1;
share->accel.dpPortBase = share->pvReg + DE_PORT_ADDR_TYPE1;
@@ -104,7 +104,7 @@ int hw_sm750_inithw(struct lynx_share *share, struct pci_dev *pdev)
{
struct sm750_share *spec_share;
struct init_status *parm;
-
+
spec_share = container_of(share, struct sm750_share, share);
parm = &spec_share->state.initParm;
if (parm->chip_clk = 0)
@@ -202,7 +202,7 @@ int hw_sm750_inithw(struct lynx_share *share, struct pci_dev *pdev)
resource_size_t hw_sm750_getVMSize(struct lynx_share *share)
{
resource_size_t ret;
-
+
ret = ddk750_getVMSize();
return ret;
}
@@ -211,7 +211,7 @@ resource_size_t hw_sm750_getVMSize(struct lynx_share *share)
int hw_sm750_output_checkMode(struct lynxfb_output* output, struct fb_var_screeninfo* var)
{
-
+
return 0;
}
@@ -222,7 +222,7 @@ int hw_sm750_output_setMode(struct lynxfb_output* output,
int ret;
disp_output_t dispSet;
int channel;
-
+
ret = 0;
dispSet = 0;
channel = *output->channel;
@@ -259,14 +259,14 @@ int hw_sm750_output_setMode(struct lynxfb_output* output,
void hw_sm750_output_clear(struct lynxfb_output* output)
{
-
+
return;
}
int hw_sm750_crtc_checkMode(struct lynxfb_crtc* crtc, struct fb_var_screeninfo* var)
{
struct lynx_share *share;
-
+
share = container_of(crtc, struct lynxfb_par, crtc)->share;
@@ -303,7 +303,7 @@ int hw_sm750_crtc_setMode(struct lynxfb_crtc* crtc,
struct lynx_share *share;
struct lynxfb_par *par;
-
+
ret = 0;
par = container_of(crtc, struct lynxfb_par, crtc);
share = par->share;
@@ -414,7 +414,7 @@ exit:
void hw_sm750_crtc_clear(struct lynxfb_crtc* crtc)
{
-
+
return;
}
@@ -428,7 +428,7 @@ int hw_sm750_setColReg(struct lynxfb_crtc* crtc, ushort index,
int hw_sm750le_setBLANK(struct lynxfb_output * output, int blank) {
int dpms, crtdb;
-
+
switch (blank)
{
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 10)
@@ -483,7 +483,7 @@ int hw_sm750le_setBLANK(struct lynxfb_output * output, int blank) {
int hw_sm750_setBLANK(struct lynxfb_output* output, int blank)
{
unsigned int dpms, pps, crtdb;
-
+
dpms = pps = crtdb = 0;
switch (blank)
--
2.4.4
^ permalink raw reply related [flat|nested] 31+ messages in thread* [PATCH v3 15/19] staging: sm750fb: remove unnecessary whitespace
2015-06-24 16:20 [PATCH v3 00/19] staging: sm750fb: checkpatch.pl fixes Juston Li
` (13 preceding siblings ...)
2015-06-24 16:25 ` [PATCH v3 14/19] staging: sm750fb: remove trailing whitespace Juston Li
@ 2015-06-24 16:25 ` Juston Li
2015-06-24 16:25 ` [PATCH v3 16/19] staging: sm750fb: fix brace placement Juston Li
` (3 subsequent siblings)
18 siblings, 0 replies; 31+ messages in thread
From: Juston Li @ 2015-06-24 16:25 UTC (permalink / raw)
To: sudipm.mukherjee, teddy.wang, gregkh, linux-fbdev, devel,
linux-kernel, dan.carpenter
Cc: Juston Li
fixes checkpatch.pl warning:
WARNING: unnecessary whitespace before a quoted newline
Signed-off-by: Juston Li <juston.h.li@gmail.com>
---
drivers/staging/sm750fb/sm750.c | 2 +-
drivers/staging/sm750fb/sm750_hw.c | 6 +++---
2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/staging/sm750fb/sm750.c b/drivers/staging/sm750fb/sm750.c
index 8e201f1..1ff14b2 100644
--- a/drivers/staging/sm750fb/sm750.c
+++ b/drivers/staging/sm750fb/sm750.c
@@ -967,7 +967,7 @@ static int lynxfb_set_fbinfo(struct fb_info *info, int index)
var->accel_flags = 0;
var->vmode = FB_VMODE_NONINTERLACED;
- pr_debug("#1 show info->cmap : \nstart=%d,len=%d,red=%p,green=%p,blue=%p,transp=%p\n",
+ pr_debug("#1 show info->cmap :\nstart=%d,len=%d,red=%p,green=%p,blue=%p,transp=%p\n",
info->cmap.start, info->cmap.len,
info->cmap.red, info->cmap.green, info->cmap.blue,
info->cmap.transp);
diff --git a/drivers/staging/sm750fb/sm750_hw.c b/drivers/staging/sm750fb/sm750_hw.c
index 3b8107c..d397382 100644
--- a/drivers/staging/sm750fb/sm750_hw.c
+++ b/drivers/staging/sm750fb/sm750_hw.c
@@ -253,7 +253,7 @@ int hw_sm750_output_setMode(struct lynxfb_output* output,
POKE32(DISPLAY_CONTROL_750LE, reg);
}
- pr_info("ddk setlogicdispout done \n");
+ pr_info("ddk setlogicdispout done\n");
return ret;
}
@@ -493,14 +493,14 @@ int hw_sm750_setBLANK(struct lynxfb_output* output, int blank)
#else
case VESA_NO_BLANKING:
#endif
- pr_info("flag = FB_BLANK_UNBLANK \n");
+ pr_info("flag = FB_BLANK_UNBLANK\n");
dpms = SYSTEM_CTRL_DPMS_VPHP;
pps = PANEL_DISPLAY_CTRL_DATA_ENABLE;
crtdb = CRT_DISPLAY_CTRL_BLANK_OFF;
break;
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 10)
case FB_BLANK_NORMAL:
- pr_info("flag = FB_BLANK_NORMAL \n");
+ pr_info("flag = FB_BLANK_NORMAL\n");
dpms = SYSTEM_CTRL_DPMS_VPHP;
pps = PANEL_DISPLAY_CTRL_DATA_DISABLE;
crtdb = CRT_DISPLAY_CTRL_BLANK_ON;
--
2.4.4
^ permalink raw reply related [flat|nested] 31+ messages in thread* [PATCH v3 16/19] staging: sm750fb: fix brace placement
2015-06-24 16:20 [PATCH v3 00/19] staging: sm750fb: checkpatch.pl fixes Juston Li
` (14 preceding siblings ...)
2015-06-24 16:25 ` [PATCH v3 15/19] staging: sm750fb: remove unnecessary whitespace Juston Li
@ 2015-06-24 16:25 ` Juston Li
2015-06-25 12:29 ` Sudip Mukherjee
2015-06-24 16:25 ` [PATCH v3 17/19] staging: sm750fb: move while statement to follow do close brace Juston Li
` (2 subsequent siblings)
18 siblings, 1 reply; 31+ messages in thread
From: Juston Li @ 2015-06-24 16:25 UTC (permalink / raw)
To: sudipm.mukherjee, teddy.wang, gregkh, linux-fbdev, devel,
linux-kernel, dan.carpenter
Cc: Juston Li
Fix brace placement errors caught by checkpatch.pl
ERROR: that open brace { should be on the previous line
Signed-off-by: Juston Li <juston.h.li@gmail.com>
---
drivers/staging/sm750fb/ddk750_chip.h | 12 +++----
drivers/staging/sm750fb/ddk750_display.c | 54 ++++++++++----------------------
drivers/staging/sm750fb/ddk750_display.h | 3 +-
drivers/staging/sm750fb/ddk750_dvi.c | 6 ++--
drivers/staging/sm750fb/ddk750_dvi.h | 3 +-
drivers/staging/sm750fb/ddk750_hwi2c.c | 6 ++--
drivers/staging/sm750fb/ddk750_mode.c | 13 +++-----
drivers/staging/sm750fb/ddk750_mode.h | 6 ++--
drivers/staging/sm750fb/ddk750_power.c | 27 +++++-----------
drivers/staging/sm750fb/ddk750_power.h | 3 +-
drivers/staging/sm750fb/ddk750_sii164.c | 16 +++-------
drivers/staging/sm750fb/ddk750_sii164.h | 3 +-
drivers/staging/sm750fb/sm750_accel.c | 45 +++++++++-----------------
drivers/staging/sm750fb/sm750_cursor.c | 23 ++++++--------
drivers/staging/sm750fb/sm750_hw.c | 27 ++++++----------
15 files changed, 81 insertions(+), 166 deletions(-)
diff --git a/drivers/staging/sm750fb/ddk750_chip.h b/drivers/staging/sm750fb/ddk750_chip.h
index 4e030e8..6ff0436 100644
--- a/drivers/staging/sm750fb/ddk750_chip.h
+++ b/drivers/staging/sm750fb/ddk750_chip.h
@@ -8,8 +8,7 @@
#include <linux/io.h>
/* This is all the chips recognized by this library */
-typedef enum _logical_chip_type_t
-{
+typedef enum _logical_chip_type_t {
SM_UNKNOWN,
SM718,
SM750,
@@ -18,8 +17,7 @@ typedef enum _logical_chip_type_t
logical_chip_type_t;
-typedef enum _clock_type_t
-{
+typedef enum _clock_type_t {
MXCLK_PLL,
PRIMARY_PLL,
SECONDARY_PLL,
@@ -28,8 +26,7 @@ typedef enum _clock_type_t
}
clock_type_t;
-typedef struct _pll_value_t
-{
+typedef struct _pll_value_t {
clock_type_t clockType;
unsigned long inputFreq; /* Input clock frequency to the PLL */
@@ -42,8 +39,7 @@ typedef struct _pll_value_t
pll_value_t;
/* input struct to initChipParam() function */
-typedef struct _initchip_param_t
-{
+typedef struct _initchip_param_t {
unsigned short powerMode; /* Use power mode 0 or 1 */
unsigned short chipClock; /**
* Speed of main chip clock in MHz unit
diff --git a/drivers/staging/sm750fb/ddk750_display.c b/drivers/staging/sm750fb/ddk750_display.c
index 4a3cb86..bd2be7f 100644
--- a/drivers/staging/sm750fb/ddk750_display.c
+++ b/drivers/staging/sm750fb/ddk750_display.c
@@ -15,12 +15,10 @@ static void setDisplayControl(int ctrl, int dispState)
cnt = 0;
/* Set the primary display control */
- if (!ctrl)
- {
+ if (!ctrl) {
ulDisplayCtrlReg = PEEK32(PANEL_DISPLAY_CTRL);
/* Turn on/off the Panel display control */
- if (dispState)
- {
+ if (dispState) {
/* Timing should be enabled first before enabling the plane
* because changing at the same time does not guarantee that
* the plane will also enabled or disabled.
@@ -45,16 +43,13 @@ static void setDisplayControl(int ctrl, int dispState)
* until a few delay. Need to write
* and read it a couple times
*/
- do
- {
+ do {
cnt++;
POKE32(PANEL_DISPLAY_CTRL, ulDisplayCtrlReg);
} while ((PEEK32(PANEL_DISPLAY_CTRL) & ~ulReservedBits) ! (ulDisplayCtrlReg & ~ulReservedBits));
printk("Set Panel Plane enbit:after tried %d times\n", cnt);
- }
- else
- {
+ } else {
/* When turning off, there is no rule on the programming
* sequence since whenever the clock is off, then it does not
* matter whether the plane is enabled or disabled.
@@ -71,14 +66,11 @@ static void setDisplayControl(int ctrl, int dispState)
POKE32(PANEL_DISPLAY_CTRL, ulDisplayCtrlReg);
}
- }
/* Set the secondary display control */
- else
- {
+ } else {
ulDisplayCtrlReg = PEEK32(CRT_DISPLAY_CTRL);
- if (dispState)
- {
+ if (dispState) {
/* Timing should be enabled first before enabling the plane because changing at the
same time does not guarantee that the plane will also enabled or disabled.
*/
@@ -100,16 +92,13 @@ static void setDisplayControl(int ctrl, int dispState)
FIELD_SET(0, CRT_DISPLAY_CTRL, RESERVED_3_MASK, ENABLE) |
FIELD_SET(0, CRT_DISPLAY_CTRL, RESERVED_4_MASK, ENABLE);
- do
- {
+ do {
cnt++;
POKE32(CRT_DISPLAY_CTRL, ulDisplayCtrlReg);
} while ((PEEK32(CRT_DISPLAY_CTRL) & ~ulReservedBits) ! (ulDisplayCtrlReg & ~ulReservedBits));
printk("Set Crt Plane enbit:after tried %d times\n", cnt);
- }
- else
- {
+ } else {
/* When turning off, there is no rule on the programming
* sequence since whenever the clock is off, then it does not
* matter whether the plane is enabled or disabled.
@@ -140,16 +129,13 @@ static void waitNextVerticalSync(int ctrl, int delay)
if ((FIELD_GET(PEEK32(PANEL_PLL_CTRL), PANEL_PLL_CTRL, POWER) =
PANEL_PLL_CTRL_POWER_OFF) ||
(FIELD_GET(PEEK32(PANEL_DISPLAY_CTRL), PANEL_DISPLAY_CTRL, TIMING) =
- PANEL_DISPLAY_CTRL_TIMING_DISABLE))
- {
+ PANEL_DISPLAY_CTRL_TIMING_DISABLE)) {
return;
}
- while (delay-- > 0)
- {
+ while (delay-- > 0) {
/* Wait for end of vsync. */
- do
- {
+ do {
status = FIELD_GET(PEEK32(SYSTEM_CTRL),
SYSTEM_CTRL,
PANEL_VSYNC);
@@ -157,8 +143,7 @@ static void waitNextVerticalSync(int ctrl, int delay)
while (status = SYSTEM_CTRL_PANEL_VSYNC_ACTIVE);
/* Wait for start of vsync. */
- do
- {
+ do {
status = FIELD_GET(PEEK32(SYSTEM_CTRL),
SYSTEM_CTRL,
PANEL_VSYNC);
@@ -173,16 +158,13 @@ static void waitNextVerticalSync(int ctrl, int delay)
if ((FIELD_GET(PEEK32(CRT_PLL_CTRL), CRT_PLL_CTRL, POWER) =
CRT_PLL_CTRL_POWER_OFF) ||
(FIELD_GET(PEEK32(CRT_DISPLAY_CTRL), CRT_DISPLAY_CTRL, TIMING) =
- CRT_DISPLAY_CTRL_TIMING_DISABLE))
- {
+ CRT_DISPLAY_CTRL_TIMING_DISABLE)) {
return;
}
- while (delay-- > 0)
- {
+ while (delay-- > 0) {
/* Wait for end of vsync. */
- do
- {
+ do {
status = FIELD_GET(PEEK32(SYSTEM_CTRL),
SYSTEM_CTRL,
CRT_VSYNC);
@@ -190,8 +172,7 @@ static void waitNextVerticalSync(int ctrl, int delay)
while (status = SYSTEM_CTRL_CRT_VSYNC_ACTIVE);
/* Wait for start of vsync. */
- do
- {
+ do {
status = FIELD_GET(PEEK32(SYSTEM_CTRL),
SYSTEM_CTRL,
CRT_VSYNC);
@@ -293,8 +274,7 @@ int ddk750_initDVIDisp(void)
1, /* Enable continuous Sync */
1, /* Enable PLL Filter */
4 /* Use the recommended value for PLL Filter value */
- ) != 0) && (dviGetVendorID() != 0x0000) && (dviGetDeviceID() != 0x0000))
- {
+ ) != 0) && (dviGetVendorID() != 0x0000) && (dviGetDeviceID() != 0x0000)) {
return (-1);
}
diff --git a/drivers/staging/sm750fb/ddk750_display.h b/drivers/staging/sm750fb/ddk750_display.h
index afdf201..abccf84 100644
--- a/drivers/staging/sm750fb/ddk750_display.h
+++ b/drivers/staging/sm750fb/ddk750_display.h
@@ -86,8 +86,7 @@
CRT means crt path DSUB
*/
#if 0
-typedef enum _disp_output_t
-{
+typedef enum _disp_output_t {
NO_DISPLAY = DPMS_OFF,
LCD1_PRI = PNL_2_PRI|PRI_TP_ON|PNL_SEQ_ON|DPMS_OFF|DAC_ON,
diff --git a/drivers/staging/sm750fb/ddk750_dvi.c b/drivers/staging/sm750fb/ddk750_dvi.c
index c42db85..a18bb4c 100644
--- a/drivers/staging/sm750fb/ddk750_dvi.c
+++ b/drivers/staging/sm750fb/ddk750_dvi.c
@@ -9,8 +9,7 @@
/* This global variable contains all the supported driver and its corresponding
function API. Please set the function pointer to NULL whenever the function
is not supported. */
-static dvi_ctrl_device_t g_dcftSupportedDviController[] -{
+static dvi_ctrl_device_t g_dcftSupportedDviController[] = {
#ifdef DVI_CTRL_SII164
{
.pfnInit = sii164InitChip,
@@ -45,8 +44,7 @@ int dviInit(
{
dvi_ctrl_device_t *pCurrentDviCtrl;
pCurrentDviCtrl = g_dcftSupportedDviController;
- if (pCurrentDviCtrl->pfnInit != NULL)
- {
+ if (pCurrentDviCtrl->pfnInit != NULL) {
return pCurrentDviCtrl->pfnInit(edgeSelect, busSelect, dualEdgeClkSelect, hsyncEnable,
vsyncEnable, deskewEnable, deskewSetting, continuousSyncEnable,
pllFilterEnable, pllFilterValue);
diff --git a/drivers/staging/sm750fb/ddk750_dvi.h b/drivers/staging/sm750fb/ddk750_dvi.h
index 83bbd6d..e1d4c9a 100644
--- a/drivers/staging/sm750fb/ddk750_dvi.h
+++ b/drivers/staging/sm750fb/ddk750_dvi.h
@@ -26,8 +26,7 @@ typedef unsigned char (*PFN_DVICTRL_CHECKINTERRUPT)(void);
typedef void (*PFN_DVICTRL_CLEARINTERRUPT)(void);
/* Structure to hold all the function pointer to the DVI Controller. */
-typedef struct _dvi_ctrl_device_t
-{
+typedef struct _dvi_ctrl_device_t {
PFN_DVICTRL_INIT pfnInit;
PFN_DVICTRL_RESETCHIP pfnResetChip;
PFN_DVICTRL_GETCHIPSTRING pfnGetChipString;
diff --git a/drivers/staging/sm750fb/ddk750_hwi2c.c b/drivers/staging/sm750fb/ddk750_hwi2c.c
index 7f3b1f9..5ddac43 100644
--- a/drivers/staging/sm750fb/ddk750_hwi2c.c
+++ b/drivers/staging/sm750fb/ddk750_hwi2c.c
@@ -106,8 +106,7 @@ static unsigned int hwI2CWriteData(
* Note:
* Only 16 byte can be accessed per i2c start instruction.
*/
- do
- {
+ do {
/* Reset I2C by writing 0 to I2C_RESET register to clear the previous status. */
POKE32(I2C_RESET, 0);
@@ -173,8 +172,7 @@ static unsigned int hwI2CReadData(
* Note:
* Only 16 byte can be accessed per i2c start instruction.
*/
- do
- {
+ do {
/* Reset I2C by writing 0 to I2C_RESET register to clear all the status. */
POKE32(I2C_RESET, 0);
diff --git a/drivers/staging/sm750fb/ddk750_mode.c b/drivers/staging/sm750fb/ddk750_mode.c
index 3d8b06d..9d10446 100644
--- a/drivers/staging/sm750fb/ddk750_mode.c
+++ b/drivers/staging/sm750fb/ddk750_mode.c
@@ -80,8 +80,7 @@ static int programModeRegisters(mode_parameter_t *pModeParam, pll_value_t *pll)
int ret = 0;
int cnt = 0;
unsigned int ulTmpValue, ulReg;
- if (pll->clockType = SECONDARY_PLL)
- {
+ if (pll->clockType = SECONDARY_PLL) {
/* programe secondary pixel clock */
POKE32(CRT_PLL_CTRL, formatPllReg(pll));
POKE32(CRT_HORIZONTAL_TOTAL,
@@ -119,9 +118,7 @@ static int programModeRegisters(mode_parameter_t *pModeParam, pll_value_t *pll)
POKE32(CRT_DISPLAY_CTRL, ulTmpValue|ulReg);
}
- }
- else if (pll->clockType = PRIMARY_PLL)
- {
+ } else if (pll->clockType = PRIMARY_PLL) {
unsigned int ulReservedBits;
POKE32(PANEL_PLL_CTRL, formatPllReg(pll));
@@ -170,16 +167,14 @@ static int programModeRegisters(mode_parameter_t *pModeParam, pll_value_t *pll)
POKE32(PANEL_DISPLAY_CTRL, ulTmpValue|ulReg);
#if 1
- while ((PEEK32(PANEL_DISPLAY_CTRL) & ~ulReservedBits) != (ulTmpValue|ulReg))
- {
+ while ((PEEK32(PANEL_DISPLAY_CTRL) & ~ulReservedBits) != (ulTmpValue|ulReg)) {
cnt++;
if (cnt > 1000)
break;
POKE32(PANEL_DISPLAY_CTRL, ulTmpValue|ulReg);
}
#endif
- }
- else {
+ } else {
ret = -1;
}
return ret;
diff --git a/drivers/staging/sm750fb/ddk750_mode.h b/drivers/staging/sm750fb/ddk750_mode.h
index 3548d67..e846dc2 100644
--- a/drivers/staging/sm750fb/ddk750_mode.h
+++ b/drivers/staging/sm750fb/ddk750_mode.h
@@ -3,16 +3,14 @@
#include "ddk750_chip.h"
-typedef enum _spolarity_t
-{
+typedef enum _spolarity_t {
POS = 0, /* positive */
NEG, /* negative */
}
spolarity_t;
-typedef struct _mode_parameter_t
-{
+typedef struct _mode_parameter_t {
/* Horizontal timing. */
unsigned long horizontal_total;
unsigned long horizontal_display_end;
diff --git a/drivers/staging/sm750fb/ddk750_power.c b/drivers/staging/sm750fb/ddk750_power.c
index 28d4402..c545c2d 100644
--- a/drivers/staging/sm750fb/ddk750_power.c
+++ b/drivers/staging/sm750fb/ddk750_power.c
@@ -36,8 +36,7 @@ void setPowerMode(unsigned int powerMode)
if (getChipType() = SM750LE)
return;
- switch (powerMode)
- {
+ switch (powerMode) {
case POWER_MODE_CTRL_MODE_MODE0:
control_value = FIELD_SET(control_value, POWER_MODE_CTRL, MODE, MODE0);
break;
@@ -55,16 +54,13 @@ void setPowerMode(unsigned int powerMode)
}
/* Set up other fields in Power Control Register */
- if (powerMode = POWER_MODE_CTRL_MODE_SLEEP)
- {
+ if (powerMode = POWER_MODE_CTRL_MODE_SLEEP) {
control_value #ifdef VALIDATION_CHIP
FIELD_SET(control_value, POWER_MODE_CTRL, 336CLK, OFF) |
#endif
FIELD_SET(control_value, POWER_MODE_CTRL, OSC_INPUT, OFF);
- }
- else
- {
+ } else {
control_value #ifdef VALIDATION_CHIP
FIELD_SET(control_value, POWER_MODE_CTRL, 336CLK, ON) |
@@ -84,8 +80,7 @@ void setCurrentGate(unsigned int gate)
/* Get current power mode. */
mode = getPowerMode();
- switch (mode)
- {
+ switch (mode) {
case POWER_MODE_CTRL_MODE_MODE0:
gate_reg = MODE0_GATE;
break;
@@ -111,13 +106,10 @@ void enable2DEngine(unsigned int enable)
uint32_t gate;
gate = PEEK32(CURRENT_GATE);
- if (enable)
- {
+ if (enable) {
gate = FIELD_SET(gate, CURRENT_GATE, DE, ON);
gate = FIELD_SET(gate, CURRENT_GATE, CSC, ON);
- }
- else
- {
+ } else {
gate = FIELD_SET(gate, CURRENT_GATE, DE, OFF);
gate = FIELD_SET(gate, CURRENT_GATE, CSC, OFF);
}
@@ -135,8 +127,7 @@ void enableZVPort(unsigned int enable)
/* Enable ZV Port Gate */
gate = PEEK32(CURRENT_GATE);
- if (enable)
- {
+ if (enable) {
gate = FIELD_SET(gate, CURRENT_GATE, ZVPORT, ON);
#if 1
/* Using Software I2C */
@@ -145,9 +136,7 @@ void enableZVPort(unsigned int enable)
/* Using Hardware I2C */
gate = FIELD_SET(gate, CURRENT_GATE, I2C, ON);
#endif
- }
- else
- {
+ } else {
/* Disable ZV Port Gate. There is no way to know whether the GPIO pins are being used
or not. Therefore, do not disable the GPIO gate. */
gate = FIELD_SET(gate, CURRENT_GATE, ZVPORT, OFF);
diff --git a/drivers/staging/sm750fb/ddk750_power.h b/drivers/staging/sm750fb/ddk750_power.h
index a20d438..b7cf6b2 100644
--- a/drivers/staging/sm750fb/ddk750_power.h
+++ b/drivers/staging/sm750fb/ddk750_power.h
@@ -1,8 +1,7 @@
#ifndef DDK750_POWER_H__
#define DDK750_POWER_H__
-typedef enum _DPMS_t
-{
+typedef enum _DPMS_t {
crtDPMS_ON = 0x0,
crtDPMS_STANDBY = 0x1,
crtDPMS_SUSPEND = 0x2,
diff --git a/drivers/staging/sm750fb/ddk750_sii164.c b/drivers/staging/sm750fb/ddk750_sii164.c
index 7f58fbe..a5153be 100644
--- a/drivers/staging/sm750fb/ddk750_sii164.c
+++ b/drivers/staging/sm750fb/ddk750_sii164.c
@@ -136,8 +136,7 @@ long sii164InitChip(
#endif
/* Check if SII164 Chip exists */
- if ((sii164GetVendorID() = SII164_VENDOR_ID) && (sii164GetDeviceID() = SII164_DEVICE_ID))
- {
+ if ((sii164GetVendorID() = SII164_VENDOR_ID) && (sii164GetDeviceID() = SII164_DEVICE_ID)) {
/*
* Initialize SII164 controller chip.
*/
@@ -183,8 +182,7 @@ long sii164InitChip(
else
config = SII164_DESKEW_ENABLE;
- switch (deskewSetting)
- {
+ switch (deskewSetting) {
case 0:
config |= SII164_DESKEW_1_STEP;
break;
@@ -286,15 +284,12 @@ void sii164SetPower(
unsigned char config;
config = i2cReadReg(SII164_I2C_ADDRESS, SII164_CONFIGURATION);
- if (powerUp = 1)
- {
+ if (powerUp = 1) {
/* Power up the chip */
config &= ~SII164_CONFIGURATION_POWER_MASK;
config |= SII164_CONFIGURATION_POWER_NORMAL;
i2cWriteReg(SII164_I2C_ADDRESS, SII164_CONFIGURATION, config);
- }
- else
- {
+ } else {
/* Power down the chip */
config &= ~SII164_CONFIGURATION_POWER_MASK;
config |= SII164_CONFIGURATION_POWER_DOWN;
@@ -314,8 +309,7 @@ static void sii164SelectHotPlugDetectionMode(
unsigned char detectReg;
detectReg = i2cReadReg(SII164_I2C_ADDRESS, SII164_DETECT) & ~SII164_DETECT_MONITOR_SENSE_OUTPUT_FLAG;
- switch (hotPlugMode)
- {
+ switch (hotPlugMode) {
case SII164_HOTPLUG_DISABLE:
detectReg |= SII164_DETECT_MONITOR_SENSE_OUTPUT_HIGH;
break;
diff --git a/drivers/staging/sm750fb/ddk750_sii164.h b/drivers/staging/sm750fb/ddk750_sii164.h
index 0996a32..f2610c9 100644
--- a/drivers/staging/sm750fb/ddk750_sii164.h
+++ b/drivers/staging/sm750fb/ddk750_sii164.h
@@ -4,8 +4,7 @@
#define USE_DVICHIP
/* Hot Plug detection mode structure */
-typedef enum _sii164_hot_plug_mode_t
-{
+typedef enum _sii164_hot_plug_mode_t {
SII164_HOTPLUG_DISABLE = 0, /* Disable Hot Plug output bit (always high). */
SII164_HOTPLUG_USE_MDI, /* Use Monitor Detect Interrupt bit. */
SII164_HOTPLUG_USE_RSEN, /* Use Receiver Sense detect bit. */
diff --git a/drivers/staging/sm750fb/sm750_accel.c b/drivers/staging/sm750fb/sm750_accel.c
index 866bb99..f7a617e 100644
--- a/drivers/staging/sm750fb/sm750_accel.c
+++ b/drivers/staging/sm750fb/sm750_accel.c
@@ -96,8 +96,7 @@ int hw_fillrect(struct lynx_accel *accel,
{
u32 deCtrl;
- if (accel->de_wait() != 0)
- {
+ if (accel->de_wait() != 0) {
/* int time wait and always busy,seems hardware
* got something error */
pr_debug("%s:De engine always bussy\n", __func__);
@@ -159,11 +158,9 @@ unsigned int rop2) /* ROP value */
de_ctrl = 0;
/* If source and destination are the same surface, need to check for overlay cases */
- if (sBase = dBase && sPitch = dPitch)
- {
+ if (sBase = dBase && sPitch = dPitch) {
/* Determine direction of operation */
- if (sy < dy)
- {
+ if (sy < dy) {
/* +----------+
|S |
| +----------+
@@ -174,9 +171,7 @@ unsigned int rop2) /* ROP value */
+----------+ */
nDirection = BOTTOM_TO_TOP;
- }
- else if (sy > dy)
- {
+ } else if (sy > dy) {
/* +----------+
|D |
| +----------+
@@ -187,13 +182,10 @@ unsigned int rop2) /* ROP value */
+----------+ */
nDirection = TOP_TO_BOTTOM;
- }
- else
- {
+ } else {
/* sy = dy */
- if (sx <= dx)
- {
+ if (sx <= dx) {
/* +------+---+------+
|S | | D|
| | | |
@@ -202,9 +194,7 @@ unsigned int rop2) /* ROP value */
+------+---+------+ */
nDirection = RIGHT_TO_LEFT;
- }
- else
- {
+ } else {
/* sx > dx */
/* +------+---+------+
@@ -219,8 +209,7 @@ unsigned int rop2) /* ROP value */
}
}
- if ((nDirection = BOTTOM_TO_TOP) || (nDirection = RIGHT_TO_LEFT))
- {
+ if ((nDirection = BOTTOM_TO_TOP) || (nDirection = RIGHT_TO_LEFT)) {
sx += width - 1;
sy += height - 1;
dx += width - 1;
@@ -255,8 +244,7 @@ unsigned int rop2) /* ROP value */
write_dpr(accel, DE_PITCH,
FIELD_VALUE(0, DE_PITCH, DESTINATION, dPitch) |
FIELD_VALUE(0, DE_PITCH, SOURCE, sPitch)); /* dpr10 */
- }
- else
+ } else
#endif
{
write_dpr(accel, DE_PITCH,
@@ -344,8 +332,7 @@ int hw_imageblit(struct lynx_accel *accel,
ul4BytesPerScan = ulBytesPerScan & ~3;
ulBytesRemain = ulBytesPerScan & 3;
- if (accel->de_wait() != 0)
- {
+ if (accel->de_wait() != 0) {
return -1;
}
@@ -371,8 +358,7 @@ int hw_imageblit(struct lynx_accel *accel,
FIELD_VALUE(0, DE_PITCH, DESTINATION, dPitch) |
FIELD_VALUE(0, DE_PITCH, SOURCE, dPitch)); /* dpr10 */
- }
- else
+ } else
#endif
{
write_dpr(accel, DE_PITCH,
@@ -414,16 +400,13 @@ int hw_imageblit(struct lynx_accel *accel,
write_dpr(accel, DE_CONTROL, de_ctrl | deGetTransparency(accel));
/* Write MONO data (line by line) to 2D Engine data port */
- for (i = 0; i < height; i++)
- {
+ for (i = 0; i < height; i++) {
/* For each line, send the data in chunks of 4 bytes */
- for (j = 0; j < (ul4BytesPerScan/4); j++)
- {
+ for (j = 0; j < (ul4BytesPerScan/4); j++) {
write_dpPort(accel, *(unsigned int *)(pSrcbuf + (j * 4)));
}
- if (ulBytesRemain)
- {
+ if (ulBytesRemain) {
memcpy(ajRemain, pSrcbuf+ul4BytesPerScan, ulBytesRemain);
write_dpPort(accel, *(unsigned int *)ajRemain);
}
diff --git a/drivers/staging/sm750fb/sm750_cursor.c b/drivers/staging/sm750fb/sm750_cursor.c
index 4ed7ca2..ab61fe6 100644
--- a/drivers/staging/sm750fb/sm750_cursor.c
+++ b/drivers/staging/sm750fb/sm750_cursor.c
@@ -122,8 +122,7 @@ void hw_cursor_setData(struct lynx_cursor *cursor,
odd=0;
*/
- for (i = 0; i < count; i++)
- {
+ for (i = 0; i < count; i++) {
color = *pcol++;
mask = *pmsk++;
data = 0;
@@ -137,11 +136,10 @@ void hw_cursor_setData(struct lynx_cursor *cursor,
else
opr = mask & color;
- for (j = 0; j < 8; j++)
- {
+ for (j = 0; j < 8; j++) {
- if (opr & (0x80 >> j))
- { /* use fg color,id = 2 */
+ if (opr & (0x80 >> j)) {
+ /* use fg color,id = 2 */
data |= 2 << (j*2);
} else {
/* use bg color,id = 1 */
@@ -204,8 +202,7 @@ void hw_cursor_setData2(struct lynx_cursor *cursor,
pstart = cursor->vstart;
pbuffer = pstart;
- for (i = 0; i < count; i++)
- {
+ for (i = 0; i < count; i++) {
color = *pcol++;
mask = *pmsk++;
data = 0;
@@ -217,11 +214,10 @@ void hw_cursor_setData2(struct lynx_cursor *cursor,
else
opr = mask & color;
- for (j = 0; j < 8; j++)
- {
+ for (j = 0; j < 8; j++) {
- if (opr & (0x80 >> j))
- { /* use fg color,id = 2 */
+ if (opr & (0x80 >> j)) {
+ /* use fg color,id = 2 */
data |= 2 << (j*2);
} else {
/* use bg color,id = 1 */
@@ -237,8 +233,7 @@ void hw_cursor_setData2(struct lynx_cursor *cursor,
iowrite16(data, pbuffer);
/* assume pitch is 1,2,4,8,...*/
- if (!(i&(pitch-1)))
- {
+ if (!(i&(pitch-1))) {
/* need a return */
pstart += offset;
pbuffer = pstart;
diff --git a/drivers/staging/sm750fb/sm750_hw.c b/drivers/staging/sm750fb/sm750_hw.c
index d397382..20a8d3b 100644
--- a/drivers/staging/sm750fb/sm750_hw.c
+++ b/drivers/staging/sm750fb/sm750_hw.c
@@ -44,8 +44,7 @@ int hw_sm750_map(struct lynx_share* share, struct pci_dev* pdev)
* successfully
* */
- if ((ret = pci_request_region(pdev, 1, "sm750fb")))
- {
+ if ((ret = pci_request_region(pdev, 1, "sm750fb"))) {
pr_err("Can not request PCI regions.\n");
goto exit;
}
@@ -78,8 +77,7 @@ int hw_sm750_map(struct lynx_share* share, struct pci_dev* pdev)
/* reserve the vidmem space of smi adaptor */
#if 0
- if ((ret = pci_request_region(pdev, 0, _moduleName_)))
- {
+ if ((ret = pci_request_region(pdev, 0, _moduleName_))) {
pr_err("Can not request PCI regions.\n");
goto exit;
}
@@ -130,8 +128,7 @@ int hw_sm750_inithw(struct lynx_share *share, struct pci_dev *pdev)
ddk750_initDVIDisp();
#endif
- if (getChipType() != SM750LE)
- {
+ if (getChipType() != SM750LE) {
/* does user need CRT ?*/
if (spec_share->state.nocrt) {
POKE32(MISC_CTRL,
@@ -177,8 +174,7 @@ int hw_sm750_inithw(struct lynx_share *share, struct pci_dev *pdev)
/* Customer may NOT use CH7301 DVI chip, which has to be
initialized differently.
*/
- if (swI2CReadReg(0xec, 0x4a) = 0x95)
- {
+ if (swI2CReadReg(0xec, 0x4a) = 0x95) {
/* The following register values for CH7301 are from
Chrontel app note and our experiment.
*/
@@ -426,11 +422,11 @@ int hw_sm750_setColReg(struct lynxfb_crtc* crtc, ushort index,
return 0;
}
-int hw_sm750le_setBLANK(struct lynxfb_output * output, int blank) {
+int hw_sm750le_setBLANK(struct lynxfb_output * output, int blank)
+{
int dpms, crtdb;
- switch (blank)
- {
+ switch (blank) {
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 10)
case FB_BLANK_UNBLANK:
#else
@@ -486,8 +482,7 @@ int hw_sm750_setBLANK(struct lynxfb_output* output, int blank)
dpms = pps = crtdb = 0;
- switch (blank)
- {
+ switch (blank) {
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 10)
case FB_BLANK_UNBLANK:
#else
@@ -585,8 +580,7 @@ int hw_sm750le_deWait(void)
unsigned int dwVal = PEEK32(DE_STATE2);
if ((FIELD_GET(dwVal, DE_STATE2, DE_STATUS) = DE_STATE2_DE_STATUS_IDLE) &&
(FIELD_GET(dwVal, DE_STATE2, DE_FIFO) = DE_STATE2_DE_FIFO_EMPTY) &&
- (FIELD_GET(dwVal, DE_STATE2, DE_MEM_FIFO) = DE_STATE2_DE_MEM_FIFO_EMPTY))
- {
+ (FIELD_GET(dwVal, DE_STATE2, DE_MEM_FIFO) = DE_STATE2_DE_MEM_FIFO_EMPTY)) {
return 0;
}
}
@@ -602,8 +596,7 @@ int hw_sm750_deWait(void)
unsigned int dwVal = PEEK32(SYSTEM_CTRL);
if ((FIELD_GET(dwVal, SYSTEM_CTRL, DE_STATUS) = SYSTEM_CTRL_DE_STATUS_IDLE) &&
(FIELD_GET(dwVal, SYSTEM_CTRL, DE_FIFO) = SYSTEM_CTRL_DE_FIFO_EMPTY) &&
- (FIELD_GET(dwVal, SYSTEM_CTRL, DE_MEM_FIFO) = SYSTEM_CTRL_DE_MEM_FIFO_EMPTY))
- {
+ (FIELD_GET(dwVal, SYSTEM_CTRL, DE_MEM_FIFO) = SYSTEM_CTRL_DE_MEM_FIFO_EMPTY)) {
return 0;
}
}
--
2.4.4
^ permalink raw reply related [flat|nested] 31+ messages in thread* Re: [PATCH v3 16/19] staging: sm750fb: fix brace placement
2015-06-24 16:25 ` [PATCH v3 16/19] staging: sm750fb: fix brace placement Juston Li
@ 2015-06-25 12:29 ` Sudip Mukherjee
2015-06-25 15:49 ` Juston Li
0 siblings, 1 reply; 31+ messages in thread
From: Sudip Mukherjee @ 2015-06-25 12:29 UTC (permalink / raw)
To: Juston Li
Cc: teddy.wang, gregkh, linux-fbdev, devel, linux-kernel,
dan.carpenter
On Wed, Jun 24, 2015 at 09:25:17AM -0700, Juston Li wrote:
> Fix brace placement errors caught by checkpatch.pl
> ERROR: that open brace { should be on the previous line
>
> Signed-off-by: Juston Li <juston.h.li@gmail.com>
> ---
<snip>
> @@ -71,14 +66,11 @@ static void setDisplayControl(int ctrl, int dispState)
> POKE32(PANEL_DISPLAY_CTRL, ulDisplayCtrlReg);
> }
>
> - }
> /* Set the secondary display control */
> - else
> - {
> + } else {
just a thought. The comment previously was at the beginning of the else
block, but now it will be placed inside the if block - at the end.
will it confuse code readers afterwards?
regards
sudip
^ permalink raw reply [flat|nested] 31+ messages in thread* Re: [PATCH v3 16/19] staging: sm750fb: fix brace placement
2015-06-25 12:29 ` Sudip Mukherjee
@ 2015-06-25 15:49 ` Juston Li
2015-06-25 20:31 ` Dan Carpenter
0 siblings, 1 reply; 31+ messages in thread
From: Juston Li @ 2015-06-25 15:49 UTC (permalink / raw)
To: Sudip Mukherjee
Cc: teddy.wang, Greg KH, linux-fbdev, devel, linux-kernel,
Dan Carpenter
On Thu, Jun 25, 2015 at 5:17 AM, Sudip Mukherjee
<sudipm.mukherjee@gmail.com> wrote:
> On Wed, Jun 24, 2015 at 09:25:17AM -0700, Juston Li wrote:
>> Fix brace placement errors caught by checkpatch.pl
>> ERROR: that open brace { should be on the previous line
>>
>> Signed-off-by: Juston Li <juston.h.li@gmail.com>
>> ---
> <snip>
>> @@ -71,14 +66,11 @@ static void setDisplayControl(int ctrl, int dispState)
>> POKE32(PANEL_DISPLAY_CTRL, ulDisplayCtrlReg);
>> }
>>
>> - }
>> /* Set the secondary display control */
>> - else
>> - {
>> + } else {
> just a thought. The comment previously was at the beginning of the else
> block, but now it will be placed inside the if block - at the end.
> will it confuse code readers afterwards?
>
> regards
> sudip
I placed it above the else to make it consistent with the if statement with
similar comment that the else corresponds to:
/* Set the primary display control */
- if (!ctrl)+ if (!ctrl) {
Thanks
Juston
^ permalink raw reply [flat|nested] 31+ messages in thread* Re: [PATCH v3 16/19] staging: sm750fb: fix brace placement
2015-06-25 15:49 ` Juston Li
@ 2015-06-25 20:31 ` Dan Carpenter
2015-06-25 21:27 ` Juston Li
0 siblings, 1 reply; 31+ messages in thread
From: Dan Carpenter @ 2015-06-25 20:31 UTC (permalink / raw)
To: Juston Li
Cc: Sudip Mukherjee, teddy.wang, Greg KH, linux-fbdev, devel,
linux-kernel
On Thu, Jun 25, 2015 at 08:49:30AM -0700, Juston Li wrote:
> I placed it above the else to make it consistent with the if statement with
> similar comment that the else corresponds to:
>
> /* Set the primary display control */
> - if (!ctrl)+ if (!ctrl) {
Once you add the else statement, then that kind of doesn't make sense.
Sudip is right. It should be:
} else {
/* commentary about else side */
regards,
dan carpenter
^ permalink raw reply [flat|nested] 31+ messages in thread* Re: [PATCH v3 16/19] staging: sm750fb: fix brace placement
2015-06-25 20:31 ` Dan Carpenter
@ 2015-06-25 21:27 ` Juston Li
2015-06-26 4:12 ` Sudip Mukherjee
0 siblings, 1 reply; 31+ messages in thread
From: Juston Li @ 2015-06-25 21:27 UTC (permalink / raw)
To: Dan Carpenter
Cc: Sudip Mukherjee, teddy.wang, Greg KH, linux-fbdev, devel,
linux-kernel
On Thu, Jun 25, 2015 at 1:31 PM, Dan Carpenter <dan.carpenter@oracle.com> wrote:
> Once you add the else statement, then that kind of doesn't make sense.
> Sudip is right. It should be:
>
> } else {
> /* commentary about else side */
Yeah, that does make more sense. I'll change it, thanks.
Patchset was responded by Greg's patch bot, I'll resend when I figure out why.
Regards
Juston
^ permalink raw reply [flat|nested] 31+ messages in thread* Re: [PATCH v3 16/19] staging: sm750fb: fix brace placement
2015-06-25 21:27 ` Juston Li
@ 2015-06-26 4:12 ` Sudip Mukherjee
0 siblings, 0 replies; 31+ messages in thread
From: Sudip Mukherjee @ 2015-06-26 4:12 UTC (permalink / raw)
To: Juston Li
Cc: Dan Carpenter, teddy.wang, Greg KH, linux-fbdev, devel,
linux-kernel
On Thu, Jun 25, 2015 at 02:27:02PM -0700, Juston Li wrote:
> On Thu, Jun 25, 2015 at 1:31 PM, Dan Carpenter <dan.carpenter@oracle.com> wrote:
> Patchset was responded by Greg's patch bot, I'll resend when I figure out why.
Greg will not apply any patch since the merge window is open. That
patchbot will respond when anyone send patch to Greg during this time.
Just send the updated patch as a reply to the original patch with proper
version number and Greg will pick it up later.
regards
sudip
^ permalink raw reply [flat|nested] 31+ messages in thread
* [PATCH v3 17/19] staging: sm750fb: move while statement to follow do close brace
2015-06-24 16:20 [PATCH v3 00/19] staging: sm750fb: checkpatch.pl fixes Juston Li
` (15 preceding siblings ...)
2015-06-24 16:25 ` [PATCH v3 16/19] staging: sm750fb: fix brace placement Juston Li
@ 2015-06-24 16:25 ` Juston Li
2015-06-24 16:25 ` [PATCH v3 18/19] staging: sm750fb: remove unnecessary braces Juston Li
2015-06-24 16:25 ` [PATCH v3 19/19] staging: sm750fb: add missing blank line after declarations Juston Li
18 siblings, 0 replies; 31+ messages in thread
From: Juston Li @ 2015-06-24 16:25 UTC (permalink / raw)
To: sudipm.mukherjee, teddy.wang, gregkh, linux-fbdev, devel,
linux-kernel, dan.carpenter
Cc: Juston Li
fixes checkpatch.pl error:
ERROR: while should follow close brace '}'
Signed-off-by: Juston Li <juston.h.li@gmail.com>
---
drivers/staging/sm750fb/ddk750_display.c | 12 ++++--------
1 file changed, 4 insertions(+), 8 deletions(-)
diff --git a/drivers/staging/sm750fb/ddk750_display.c b/drivers/staging/sm750fb/ddk750_display.c
index bd2be7f..90c5c9e 100644
--- a/drivers/staging/sm750fb/ddk750_display.c
+++ b/drivers/staging/sm750fb/ddk750_display.c
@@ -139,16 +139,14 @@ static void waitNextVerticalSync(int ctrl, int delay)
status = FIELD_GET(PEEK32(SYSTEM_CTRL),
SYSTEM_CTRL,
PANEL_VSYNC);
- }
- while (status = SYSTEM_CTRL_PANEL_VSYNC_ACTIVE);
+ } while (status = SYSTEM_CTRL_PANEL_VSYNC_ACTIVE);
/* Wait for start of vsync. */
do {
status = FIELD_GET(PEEK32(SYSTEM_CTRL),
SYSTEM_CTRL,
PANEL_VSYNC);
- }
- while (status = SYSTEM_CTRL_PANEL_VSYNC_INACTIVE);
+ } while (status = SYSTEM_CTRL_PANEL_VSYNC_INACTIVE);
}
} else {
@@ -168,16 +166,14 @@ static void waitNextVerticalSync(int ctrl, int delay)
status = FIELD_GET(PEEK32(SYSTEM_CTRL),
SYSTEM_CTRL,
CRT_VSYNC);
- }
- while (status = SYSTEM_CTRL_CRT_VSYNC_ACTIVE);
+ } while (status = SYSTEM_CTRL_CRT_VSYNC_ACTIVE);
/* Wait for start of vsync. */
do {
status = FIELD_GET(PEEK32(SYSTEM_CTRL),
SYSTEM_CTRL,
CRT_VSYNC);
- }
- while (status = SYSTEM_CTRL_CRT_VSYNC_INACTIVE);
+ } while (status = SYSTEM_CTRL_CRT_VSYNC_INACTIVE);
}
}
}
--
2.4.4
^ permalink raw reply related [flat|nested] 31+ messages in thread* [PATCH v3 18/19] staging: sm750fb: remove unnecessary braces
2015-06-24 16:20 [PATCH v3 00/19] staging: sm750fb: checkpatch.pl fixes Juston Li
` (16 preceding siblings ...)
2015-06-24 16:25 ` [PATCH v3 17/19] staging: sm750fb: move while statement to follow do close brace Juston Li
@ 2015-06-24 16:25 ` Juston Li
2015-06-24 16:25 ` [PATCH v3 19/19] staging: sm750fb: add missing blank line after declarations Juston Li
18 siblings, 0 replies; 31+ messages in thread
From: Juston Li @ 2015-06-24 16:25 UTC (permalink / raw)
To: sudipm.mukherjee, teddy.wang, gregkh, linux-fbdev, devel,
linux-kernel, dan.carpenter
Cc: Juston Li
fixes checkpatch.pl warning:
WARNING: braces {} are not necessary for single statement blocks
Signed-off-by: Juston Li <juston.h.li@gmail.com>
---
drivers/staging/sm750fb/sm750_accel.c | 9 +++------
drivers/staging/sm750fb/sm750_hw.c | 6 ++----
2 files changed, 5 insertions(+), 10 deletions(-)
diff --git a/drivers/staging/sm750fb/sm750_accel.c b/drivers/staging/sm750fb/sm750_accel.c
index f7a617e..291a47b 100644
--- a/drivers/staging/sm750fb/sm750_accel.c
+++ b/drivers/staging/sm750fb/sm750_accel.c
@@ -259,9 +259,8 @@ unsigned int rop2) /* ROP value */
FIELD_VALUE(0, DE_WINDOW_WIDTH, DESTINATION, (dPitch/Bpp)) |
FIELD_VALUE(0, DE_WINDOW_WIDTH, SOURCE, (sPitch/Bpp))); /* dpr3c */
- if (accel->de_wait() != 0) {
+ if (accel->de_wait() != 0)
return -1;
- }
{
@@ -332,9 +331,8 @@ int hw_imageblit(struct lynx_accel *accel,
ul4BytesPerScan = ulBytesPerScan & ~3;
ulBytesRemain = ulBytesPerScan & 3;
- if (accel->de_wait() != 0) {
+ if (accel->de_wait() != 0)
return -1;
- }
/* 2D Source Base.
Use 0 for HOST Blt.
@@ -402,9 +400,8 @@ int hw_imageblit(struct lynx_accel *accel,
/* Write MONO data (line by line) to 2D Engine data port */
for (i = 0; i < height; i++) {
/* For each line, send the data in chunks of 4 bytes */
- for (j = 0; j < (ul4BytesPerScan/4); j++) {
+ for (j = 0; j < (ul4BytesPerScan/4); j++)
write_dpPort(accel, *(unsigned int *)(pSrcbuf + (j * 4)));
- }
if (ulBytesRemain) {
memcpy(ajRemain, pSrcbuf+ul4BytesPerScan, ulBytesRemain);
diff --git a/drivers/staging/sm750fb/sm750_hw.c b/drivers/staging/sm750fb/sm750_hw.c
index 20a8d3b..97a0f63 100644
--- a/drivers/staging/sm750fb/sm750_hw.c
+++ b/drivers/staging/sm750fb/sm750_hw.c
@@ -187,9 +187,8 @@ int hw_sm750_inithw(struct lynx_share *share, struct pci_dev *pdev)
}
/* init 2d engine */
- if (!share->accel_off) {
+ if (!share->accel_off)
hw_sm750_initAccel(share);
- }
return 0;
}
@@ -536,9 +535,8 @@ int hw_sm750_setBLANK(struct lynxfb_output* output, int blank)
POKE32(CRT_DISPLAY_CTRL, FIELD_VALUE(PEEK32(CRT_DISPLAY_CTRL), CRT_DISPLAY_CTRL, BLANK, crtdb));
}
- if (output->paths & sm750_panel) {
+ if (output->paths & sm750_panel)
POKE32(PANEL_DISPLAY_CTRL, FIELD_VALUE(PEEK32(PANEL_DISPLAY_CTRL), PANEL_DISPLAY_CTRL, DATA, pps));
- }
return 0;
}
--
2.4.4
^ permalink raw reply related [flat|nested] 31+ messages in thread* [PATCH v3 19/19] staging: sm750fb: add missing blank line after declarations
2015-06-24 16:20 [PATCH v3 00/19] staging: sm750fb: checkpatch.pl fixes Juston Li
` (17 preceding siblings ...)
2015-06-24 16:25 ` [PATCH v3 18/19] staging: sm750fb: remove unnecessary braces Juston Li
@ 2015-06-24 16:25 ` Juston Li
18 siblings, 0 replies; 31+ messages in thread
From: Juston Li @ 2015-06-24 16:25 UTC (permalink / raw)
To: sudipm.mukherjee, teddy.wang, gregkh, linux-fbdev, devel,
linux-kernel, dan.carpenter
Cc: Juston Li
fixes checkpatch.pl:
WARNING: Missing a blank line after declarations
Signed-off-by: Juston Li <juston.h.li@gmail.com>
---
drivers/staging/sm750fb/ddk750_chip.c | 1 +
drivers/staging/sm750fb/ddk750_display.c | 2 ++
drivers/staging/sm750fb/ddk750_dvi.c | 1 +
drivers/staging/sm750fb/ddk750_mode.c | 3 +++
drivers/staging/sm750fb/ddk750_power.c | 1 +
drivers/staging/sm750fb/ddk750_sii164.c | 1 +
drivers/staging/sm750fb/sm750_accel.c | 1 +
drivers/staging/sm750fb/sm750_cursor.c | 2 ++
drivers/staging/sm750fb/sm750_hw.c | 7 +++++++
9 files changed, 19 insertions(+)
diff --git a/drivers/staging/sm750fb/ddk750_chip.c b/drivers/staging/sm750fb/ddk750_chip.c
index d7435d7..5e6798e 100644
--- a/drivers/staging/sm750fb/ddk750_chip.c
+++ b/drivers/staging/sm750fb/ddk750_chip.c
@@ -474,6 +474,7 @@ unsigned int calcPllValue(unsigned int request_orig, pll_value_t *pll)
M += (fl_quo*X % 10000) > 5000?1:0;
if (M < 256 && M > 0) {
unsigned int diff;
+
tmpClock = pll->inputFreq * M / N / X;
diff = absDiff(tmpClock, request_orig);
if (diff < miniDiff) {
diff --git a/drivers/staging/sm750fb/ddk750_display.c b/drivers/staging/sm750fb/ddk750_display.c
index 90c5c9e..70e7f10 100644
--- a/drivers/staging/sm750fb/ddk750_display.c
+++ b/drivers/staging/sm750fb/ddk750_display.c
@@ -121,6 +121,7 @@ static void setDisplayControl(int ctrl, int dispState)
static void waitNextVerticalSync(int ctrl, int delay)
{
unsigned int status;
+
if (!ctrl) {
/* primary controller */
@@ -210,6 +211,7 @@ static void swPanelPowerSequence(int disp, int delay)
void ddk750_setLogicalDispOut(disp_output_t output)
{
unsigned int reg;
+
if (output & PNL_2_USAGE) {
/* set panel path controller select */
reg = PEEK32(PANEL_DISPLAY_CTRL);
diff --git a/drivers/staging/sm750fb/ddk750_dvi.c b/drivers/staging/sm750fb/ddk750_dvi.c
index a18bb4c..a7a2351 100644
--- a/drivers/staging/sm750fb/ddk750_dvi.c
+++ b/drivers/staging/sm750fb/ddk750_dvi.c
@@ -43,6 +43,7 @@ int dviInit(
)
{
dvi_ctrl_device_t *pCurrentDviCtrl;
+
pCurrentDviCtrl = g_dcftSupportedDviController;
if (pCurrentDviCtrl->pfnInit != NULL) {
return pCurrentDviCtrl->pfnInit(edgeSelect, busSelect, dualEdgeClkSelect, hsyncEnable,
diff --git a/drivers/staging/sm750fb/ddk750_mode.c b/drivers/staging/sm750fb/ddk750_mode.c
index 9d10446..2399b17 100644
--- a/drivers/staging/sm750fb/ddk750_mode.c
+++ b/drivers/staging/sm750fb/ddk750_mode.c
@@ -80,6 +80,7 @@ static int programModeRegisters(mode_parameter_t *pModeParam, pll_value_t *pll)
int ret = 0;
int cnt = 0;
unsigned int ulTmpValue, ulReg;
+
if (pll->clockType = SECONDARY_PLL) {
/* programe secondary pixel clock */
POKE32(CRT_PLL_CTRL, formatPllReg(pll));
@@ -120,6 +121,7 @@ static int programModeRegisters(mode_parameter_t *pModeParam, pll_value_t *pll)
} else if (pll->clockType = PRIMARY_PLL) {
unsigned int ulReservedBits;
+
POKE32(PANEL_PLL_CTRL, formatPllReg(pll));
POKE32(PANEL_HORIZONTAL_TOTAL,
@@ -184,6 +186,7 @@ int ddk750_setModeTiming(mode_parameter_t *parm, clock_type_t clock)
{
pll_value_t pll;
unsigned int uiActualPixelClk;
+
pll.inputFreq = DEFAULT_INPUT_CLOCK;
pll.clockType = clock;
diff --git a/drivers/staging/sm750fb/ddk750_power.c b/drivers/staging/sm750fb/ddk750_power.c
index c545c2d..c8c51be 100644
--- a/drivers/staging/sm750fb/ddk750_power.c
+++ b/drivers/staging/sm750fb/ddk750_power.c
@@ -5,6 +5,7 @@
void ddk750_setDPMS(DPMS_t state)
{
unsigned int value;
+
if (getChipType() = SM750LE) {
value = PEEK32(CRT_DISPLAY_CTRL);
POKE32(CRT_DISPLAY_CTRL, FIELD_VALUE(value, CRT_DISPLAY_CTRL, DPMS, state));
diff --git a/drivers/staging/sm750fb/ddk750_sii164.c b/drivers/staging/sm750fb/ddk750_sii164.c
index a5153be..0bdf3db 100644
--- a/drivers/staging/sm750fb/ddk750_sii164.c
+++ b/drivers/staging/sm750fb/ddk750_sii164.c
@@ -340,6 +340,7 @@ void sii164EnableHotPlugDetection(
)
{
unsigned char detectReg;
+
detectReg = i2cReadReg(SII164_I2C_ADDRESS, SII164_DETECT);
/* Depending on each DVI controller, need to enable the hot plug based on each
diff --git a/drivers/staging/sm750fb/sm750_accel.c b/drivers/staging/sm750fb/sm750_accel.c
index 291a47b..b75ffbd 100644
--- a/drivers/staging/sm750fb/sm750_accel.c
+++ b/drivers/staging/sm750fb/sm750_accel.c
@@ -152,6 +152,7 @@ unsigned int rop2) /* ROP value */
{
unsigned int nDirection, de_ctrl;
int opSign;
+
nDirection = LEFT_TO_RIGHT;
/* Direction of ROP2 operation: 1 = Left to Right, (-1) = Right to Left */
opSign = 1;
diff --git a/drivers/staging/sm750fb/sm750_cursor.c b/drivers/staging/sm750fb/sm750_cursor.c
index ab61fe6..2400c6c 100644
--- a/drivers/staging/sm750fb/sm750_cursor.c
+++ b/drivers/staging/sm750fb/sm750_cursor.c
@@ -61,6 +61,7 @@ writel((data), cursor->mmio + (addr))
void hw_cursor_enable(struct lynx_cursor *cursor)
{
u32 reg;
+
reg = FIELD_VALUE(0, HWC_ADDRESS, ADDRESS, cursor->offset)|
FIELD_SET(0, HWC_ADDRESS, EXT, LOCAL)|
FIELD_SET(0, HWC_ADDRESS, ENABLE, ENABLE);
@@ -81,6 +82,7 @@ void hw_cursor_setPos(struct lynx_cursor *cursor,
int x, int y)
{
u32 reg;
+
reg = FIELD_VALUE(0, HWC_LOCATION, Y, y)|
FIELD_VALUE(0, HWC_LOCATION, X, x);
POKE32(HWC_LOCATION, reg);
diff --git a/drivers/staging/sm750fb/sm750_hw.c b/drivers/staging/sm750fb/sm750_hw.c
index 97a0f63..10f15b5 100644
--- a/drivers/staging/sm750fb/sm750_hw.c
+++ b/drivers/staging/sm750fb/sm750_hw.c
@@ -243,6 +243,7 @@ int hw_sm750_output_setMode(struct lynxfb_output* output,
} else {
/* just open DISPLAY_CONTROL_750LE register bit 3:0*/
u32 reg;
+
reg = PEEK32(DISPLAY_CONTROL_750LE);
reg |= 0xf;
POKE32(DISPLAY_CONTROL_750LE, reg);
@@ -417,6 +418,7 @@ int hw_sm750_setColReg(struct lynxfb_crtc* crtc, ushort index,
ushort red, ushort green, ushort blue)
{
static unsigned int add[] = {PANEL_PALETTE_RAM, CRT_PALETTE_RAM};
+
POKE32(add[crtc->channel] + index*4, (red<<16)|(green<<8)|blue);
return 0;
}
@@ -545,6 +547,7 @@ int hw_sm750_setBLANK(struct lynxfb_output* output, int blank)
void hw_sm750_initAccel(struct lynx_share *share)
{
u32 reg;
+
enable2DEngine(1);
if (getChipType() = SM750LE) {
@@ -574,8 +577,10 @@ void hw_sm750_initAccel(struct lynx_share *share)
int hw_sm750le_deWait(void)
{
int i = 0x10000000;
+
while (i--) {
unsigned int dwVal = PEEK32(DE_STATE2);
+
if ((FIELD_GET(dwVal, DE_STATE2, DE_STATUS) = DE_STATE2_DE_STATUS_IDLE) &&
(FIELD_GET(dwVal, DE_STATE2, DE_FIFO) = DE_STATE2_DE_FIFO_EMPTY) &&
(FIELD_GET(dwVal, DE_STATE2, DE_MEM_FIFO) = DE_STATE2_DE_MEM_FIFO_EMPTY)) {
@@ -590,8 +595,10 @@ int hw_sm750le_deWait(void)
int hw_sm750_deWait(void)
{
int i = 0x10000000;
+
while (i--) {
unsigned int dwVal = PEEK32(SYSTEM_CTRL);
+
if ((FIELD_GET(dwVal, SYSTEM_CTRL, DE_STATUS) = SYSTEM_CTRL_DE_STATUS_IDLE) &&
(FIELD_GET(dwVal, SYSTEM_CTRL, DE_FIFO) = SYSTEM_CTRL_DE_FIFO_EMPTY) &&
(FIELD_GET(dwVal, SYSTEM_CTRL, DE_MEM_FIFO) = SYSTEM_CTRL_DE_MEM_FIFO_EMPTY)) {
--
2.4.4
^ permalink raw reply related [flat|nested] 31+ messages in thread