From: Anatoly Stepanov <drivengroove@gmail.com>
To: linux-fbdev@vger.kernel.org
Subject: [PATCH 08/11] staging: sm750fb: fix 'switch and case' indentation
Date: Sun, 28 Jun 2015 23:44:01 +0000 [thread overview]
Message-ID: <1435535044-22042-9-git-send-email-drivengroove@gmail.com> (raw)
Fix according to checkpatch.pl message:
"ERROR: switch and case should be at the same indent"
Signed-off-by: Anatoly Stepanov <drivengroove@gmail.com>
---
drivers/staging/sm750fb/sm750_hw.c | 172 ++++++++++++++++++-------------------
1 file changed, 86 insertions(+), 86 deletions(-)
diff --git a/drivers/staging/sm750fb/sm750_hw.c b/drivers/staging/sm750fb/sm750_hw.c
index 9de2532..3093c25 100644
--- a/drivers/staging/sm750fb/sm750_hw.c
+++ b/drivers/staging/sm750fb/sm750_hw.c
@@ -153,15 +153,15 @@ int hw_sm750_inithw(struct lynx_share *share, struct pci_dev *pdev)
}
switch (spec_share->state.pnltype) {
- case sm750_doubleTFT:
- case sm750_24TFT:
- case sm750_dualTFT:
- POKE32(PANEL_DISPLAY_CTRL,
- FIELD_VALUE(PEEK32(PANEL_DISPLAY_CTRL),
- PANEL_DISPLAY_CTRL,
- TFT_DISP,
- spec_share->state.pnltype));
- break;
+ case sm750_doubleTFT:
+ case sm750_24TFT:
+ case sm750_dualTFT:
+ POKE32(PANEL_DISPLAY_CTRL,
+ FIELD_VALUE(PEEK32(PANEL_DISPLAY_CTRL),
+ PANEL_DISPLAY_CTRL,
+ TFT_DISP,
+ spec_share->state.pnltype));
+ break;
}
} else {
/* for 750LE ,no DVI chip initilization makes Monitor no signal */
@@ -267,17 +267,17 @@ int hw_sm750_crtc_checkMode(struct lynxfb_crtc *crtc, struct fb_var_screeninfo *
share = container_of(crtc, struct lynxfb_par, crtc)->share;
switch (var->bits_per_pixel) {
- case 8:
- case 16:
- break;
- case 32:
- if (share->revid = SM750LE_REVISION_ID) {
- pr_debug("750le do not support 32bpp\n");
- return -EINVAL;
- }
- break;
- default:
+ case 8:
+ case 16:
+ break;
+ case 32:
+ if (share->revid = SM750LE_REVISION_ID) {
+ pr_debug("750le do not support 32bpp\n");
return -EINVAL;
+ }
+ break;
+ default:
+ return -EINVAL;
}
@@ -307,16 +307,16 @@ int hw_sm750_crtc_setMode(struct lynxfb_crtc *crtc,
if (!share->accel_off) {
/* set 2d engine pixel format according to mode bpp */
switch (var->bits_per_pixel) {
- case 8:
- fmt = 0;
- break;
- case 16:
- fmt = 1;
- break;
- case 32:
- default:
- fmt = 2;
- break;
+ case 8:
+ fmt = 0;
+ break;
+ case 16:
+ fmt = 1;
+ break;
+ case 32:
+ default:
+ fmt = 2;
+ break;
}
hw_set2dformat(&share->accel, fmt);
}
@@ -427,45 +427,45 @@ int hw_sm750le_setBLANK(struct lynxfb_output *output, int blank) {
switch (blank) {
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 10)
- case FB_BLANK_UNBLANK:
+ case FB_BLANK_UNBLANK:
#else
- case VESA_NO_BLANKING:
+ case VESA_NO_BLANKING:
#endif
- dpms = CRT_DISPLAY_CTRL_DPMS_0;
- crtdb = CRT_DISPLAY_CTRL_BLANK_OFF;
- break;
+ dpms = CRT_DISPLAY_CTRL_DPMS_0;
+ crtdb = CRT_DISPLAY_CTRL_BLANK_OFF;
+ break;
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 10)
- case FB_BLANK_NORMAL:
- dpms = CRT_DISPLAY_CTRL_DPMS_0;
- crtdb = CRT_DISPLAY_CTRL_BLANK_ON;
- break;
+ case FB_BLANK_NORMAL:
+ dpms = CRT_DISPLAY_CTRL_DPMS_0;
+ crtdb = CRT_DISPLAY_CTRL_BLANK_ON;
+ break;
#endif
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 10)
- case FB_BLANK_VSYNC_SUSPEND:
+ case FB_BLANK_VSYNC_SUSPEND:
#else
- case VESA_VSYNC_SUSPEND:
+ case VESA_VSYNC_SUSPEND:
#endif
- dpms = CRT_DISPLAY_CTRL_DPMS_2;
- crtdb = CRT_DISPLAY_CTRL_BLANK_ON;
- break;
+ dpms = CRT_DISPLAY_CTRL_DPMS_2;
+ crtdb = CRT_DISPLAY_CTRL_BLANK_ON;
+ break;
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 10)
- case FB_BLANK_HSYNC_SUSPEND:
+ case FB_BLANK_HSYNC_SUSPEND:
#else
- case VESA_HSYNC_SUSPEND:
+ case VESA_HSYNC_SUSPEND:
#endif
- dpms = CRT_DISPLAY_CTRL_DPMS_1;
- crtdb = CRT_DISPLAY_CTRL_BLANK_ON;
- break;
+ dpms = CRT_DISPLAY_CTRL_DPMS_1;
+ crtdb = CRT_DISPLAY_CTRL_BLANK_ON;
+ break;
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 10)
- case FB_BLANK_POWERDOWN:
+ case FB_BLANK_POWERDOWN:
#else
- case VESA_POWERDOWN:
+ case VESA_POWERDOWN:
#endif
- dpms = CRT_DISPLAY_CTRL_DPMS_3;
- crtdb = CRT_DISPLAY_CTRL_BLANK_ON;
- break;
- default:
- return -EINVAL;
+ dpms = CRT_DISPLAY_CTRL_DPMS_3;
+ crtdb = CRT_DISPLAY_CTRL_BLANK_ON;
+ break;
+ default:
+ return -EINVAL;
}
if (output->paths & sm750_crt) {
@@ -483,50 +483,50 @@ int hw_sm750_setBLANK(struct lynxfb_output *output, int blank)
switch (blank) {
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 10)
- case FB_BLANK_UNBLANK:
+ case FB_BLANK_UNBLANK:
#else
- case VESA_NO_BLANKING:
+ case VESA_NO_BLANKING:
#endif
- pr_info("flag = FB_BLANK_UNBLANK \n");
- dpms = SYSTEM_CTRL_DPMS_VPHP;
- pps = PANEL_DISPLAY_CTRL_DATA_ENABLE;
- crtdb = CRT_DISPLAY_CTRL_BLANK_OFF;
- break;
+ pr_info("flag = FB_BLANK_UNBLANK \n");
+ dpms = SYSTEM_CTRL_DPMS_VPHP;
+ pps = PANEL_DISPLAY_CTRL_DATA_ENABLE;
+ crtdb = CRT_DISPLAY_CTRL_BLANK_OFF;
+ break;
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 10)
- case FB_BLANK_NORMAL:
- pr_info("flag = FB_BLANK_NORMAL \n");
- dpms = SYSTEM_CTRL_DPMS_VPHP;
- pps = PANEL_DISPLAY_CTRL_DATA_DISABLE;
- crtdb = CRT_DISPLAY_CTRL_BLANK_ON;
- break;
+ case FB_BLANK_NORMAL:
+ pr_info("flag = FB_BLANK_NORMAL \n");
+ dpms = SYSTEM_CTRL_DPMS_VPHP;
+ pps = PANEL_DISPLAY_CTRL_DATA_DISABLE;
+ crtdb = CRT_DISPLAY_CTRL_BLANK_ON;
+ break;
#endif
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 10)
- case FB_BLANK_VSYNC_SUSPEND:
+ case FB_BLANK_VSYNC_SUSPEND:
#else
- case VESA_VSYNC_SUSPEND:
+ case VESA_VSYNC_SUSPEND:
#endif
- dpms = SYSTEM_CTRL_DPMS_VNHP;
- pps = PANEL_DISPLAY_CTRL_DATA_DISABLE;
- crtdb = CRT_DISPLAY_CTRL_BLANK_ON;
- break;
+ dpms = SYSTEM_CTRL_DPMS_VNHP;
+ pps = PANEL_DISPLAY_CTRL_DATA_DISABLE;
+ crtdb = CRT_DISPLAY_CTRL_BLANK_ON;
+ break;
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 10)
- case FB_BLANK_HSYNC_SUSPEND:
+ case FB_BLANK_HSYNC_SUSPEND:
#else
- case VESA_HSYNC_SUSPEND:
+ case VESA_HSYNC_SUSPEND:
#endif
- dpms = SYSTEM_CTRL_DPMS_VPHN;
- pps = PANEL_DISPLAY_CTRL_DATA_DISABLE;
- crtdb = CRT_DISPLAY_CTRL_BLANK_ON;
- break;
+ dpms = SYSTEM_CTRL_DPMS_VPHN;
+ pps = PANEL_DISPLAY_CTRL_DATA_DISABLE;
+ crtdb = CRT_DISPLAY_CTRL_BLANK_ON;
+ break;
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 10)
- case FB_BLANK_POWERDOWN:
+ case FB_BLANK_POWERDOWN:
#else
- case VESA_POWERDOWN:
+ case VESA_POWERDOWN:
#endif
- dpms = SYSTEM_CTRL_DPMS_VNHN;
- pps = PANEL_DISPLAY_CTRL_DATA_DISABLE;
- crtdb = CRT_DISPLAY_CTRL_BLANK_ON;
- break;
+ dpms = SYSTEM_CTRL_DPMS_VNHN;
+ pps = PANEL_DISPLAY_CTRL_DATA_DISABLE;
+ crtdb = CRT_DISPLAY_CTRL_BLANK_ON;
+ break;
}
if (output->paths & sm750_crt) {
--
2.1.0
reply other threads:[~2015-06-28 23:44 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1435535044-22042-9-git-send-email-drivengroove@gmail.com \
--to=drivengroove@gmail.com \
--cc=linux-fbdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox