Re: [RESEND PATCH] pwm-backlight: fix the panel power sequence

[Lucas Stach <l.stach@pengutronix.de>]

Am Freitag, den 16.10.2015, 09:37 +0800 schrieb YH Huang:
> In order to match the panel power sequence, disable the enable_gpio
> in the probe function. Also, reorder the code in the power_on and
> power_off function to match the timing.
> 
You aren't specifying which panels power sequence you are matching here.
Are you sure you aren't breaking other panels with this patch?

Regards,
Lucas

> Signed-off-by: YH Huang <yh.huang@mediatek.com>
> ---
>  drivers/video/backlight/pwm_bl.c |   15 +++++++++------
>  1 file changed, 9 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c
> index eff379b..99eca1e 100644
> --- a/drivers/video/backlight/pwm_bl.c
> +++ b/drivers/video/backlight/pwm_bl.c
> @@ -54,10 +54,11 @@ static void pwm_backlight_power_on(struct pwm_bl_data *pb, int brightness)
>  	if (err < 0)
>  		dev_err(pb->dev, "failed to enable power supply\n");
>  
> +	pwm_enable(pb->pwm);
> +
>  	if (pb->enable_gpio)
>  		gpiod_set_value(pb->enable_gpio, 1);
>  
> -	pwm_enable(pb->pwm);
>  	pb->enabled = true;
>  }
>  
> @@ -66,12 +67,12 @@ static void pwm_backlight_power_off(struct pwm_bl_data *pb)
>  	if (!pb->enabled)
>  		return;
>  
> -	pwm_config(pb->pwm, 0, pb->period);
> -	pwm_disable(pb->pwm);
> -
>  	if (pb->enable_gpio)
>  		gpiod_set_value(pb->enable_gpio, 0);
>  
> +	pwm_config(pb->pwm, 0, pb->period);
> +	pwm_disable(pb->pwm);
> +
>  	regulator_disable(pb->power_supply);
>  	pb->enabled = false;
>  }
> @@ -241,8 +242,7 @@ static int pwm_backlight_probe(struct platform_device *pdev)
>  	pb->dev = &pdev->dev;
>  	pb->enabled = false;
>  
> -	pb->enable_gpio = devm_gpiod_get_optional(&pdev->dev, "enable",
> -						  GPIOD_OUT_HIGH);
> +	pb->enable_gpio = devm_gpiod_get_optional(&pdev->dev, "enable");
>  	if (IS_ERR(pb->enable_gpio)) {
>  		ret = PTR_ERR(pb->enable_gpio);
>  		goto err_alloc;
> @@ -264,6 +264,9 @@ static int pwm_backlight_probe(struct platform_device *pdev)
>  		pb->enable_gpio = gpio_to_desc(data->enable_gpio);
>  	}
>  
> +	if (pb->enable_gpio)
> +		gpiod_direction_output(pb->enable_gpio, 0);
> +
>  	pb->power_supply = devm_regulator_get(&pdev->dev, "power");
>  	if (IS_ERR(pb->power_supply)) {
>  		ret = PTR_ERR(pb->power_supply);

-- 
Pengutronix e.K.             | Lucas Stach                 |
Industrial Linux Solutions   | http://www.pengutronix.de/  |