From: Linus Walleij <linus.walleij@linaro.org>
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 00/11] CLCD Nomadik+Versatile support
Date: Thu, 04 Feb 2016 14:04:09 +0000 [thread overview]
Message-ID: <1454594660-7532-1-git-send-email-linus.walleij@linaro.org> (raw)
This is the result of some tiresome work to adopt the CLCD
driver to use device tree properly for Nomadik, Integrator,
Versatile and RealView.
The Nomadik support basically just adds some vendor data stuff
similar to what we have done for other drivers, but also add
as per-vendor .board_init() and .panel_init() hook.
These hooks are then used to handle panels on these boards.
Versatile is the most elaborate and took the most time, as it
is doing autodetection of the panel at runtime, and thus we
encode all possible panels in the DT and select the detected
panel at .panel_init() time.
The patches have been tested quite extensively on my Nomadik
NHK8815 and the ARM Integrator, Versatile, and RealView
reference designs, as well as on the more forgiving QEMU
emulation of Versatile.
Eventually I would like to have patches 1 thru 8 (those with
patches to CLCD or the DT bindings) applied through the FBDEV
subsystem, while I will take the SoC specifics (patches 9 thru 11,
and some non-included Nomadik patches) separately as it affects
multiple ARM SoC files.
Linus Walleij (11):
video: ARM CLCD: backlight support for OF
video: ARM CLCD: support DT signal inversion flags
video: ARM CLCD: support pads connected in reverse order
video: ARM CLCD: support Nomadik variant
video: ARM CLCD: add special board and panel hooks for Nomadik
Documentation/DT: add blurb for IB2 syscon to Versatile
Documentation/DT: add Versatile display bindings
video: ARM CLCD: add special panel hook for Versatiles
ARM: PB11MPCore: define a standard VGA panel
ARM: PB1176: define a standard VGA panel
ARM: versatile: move CLCD configuration to device tree
Documentation/devicetree/bindings/arm/arm-boards | 8 +
.../bindings/display/panel/epson,l2f50113t00.txt | 7 +
.../bindings/display/panel/sanyo,alr252rgt.txt | 7 +
.../bindings/display/panel/sanyo,tm38qv67a02a.txt | 7 +
.../bindings/display/panel/sharp,lq084v1dg21.txt | 7 +
.../devicetree/bindings/vendor-prefixes.txt | 1 +
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/arm-realview-pb1176.dts | 40 ++
arch/arm/boot/dts/arm-realview-pb11mp.dts | 19 +-
arch/arm/boot/dts/versatile-ab-ib2.dts | 20 +
arch/arm/boot/dts/versatile-ab.dts | 203 ++++++++++-
arch/arm/mach-versatile/versatile_dt.c | 162 --------
drivers/video/fbdev/Kconfig | 6 +-
drivers/video/fbdev/Makefile | 1 +
drivers/video/fbdev/amba-clcd-nomadik.c | 263 +++++++++++++
drivers/video/fbdev/amba-clcd-nomadik.h | 24 ++
drivers/video/fbdev/amba-clcd-versatile.c | 406 +++++++++++++++++++++
drivers/video/fbdev/amba-clcd-versatile.h | 17 +
drivers/video/fbdev/amba-clcd.c | 205 ++++++++++-
include/linux/amba/clcd.h | 76 +++-
20 files changed, 1279 insertions(+), 201 deletions(-)
create mode 100644 Documentation/devicetree/bindings/display/panel/epson,l2f50113t00.txt
create mode 100644 Documentation/devicetree/bindings/display/panel/sanyo,alr252rgt.txt
create mode 100644 Documentation/devicetree/bindings/display/panel/sanyo,tm38qv67a02a.txt
create mode 100644 Documentation/devicetree/bindings/display/panel/sharp,lq084v1dg21.txt
create mode 100644 arch/arm/boot/dts/versatile-ab-ib2.dts
create mode 100644 drivers/video/fbdev/amba-clcd-nomadik.c
create mode 100644 drivers/video/fbdev/amba-clcd-nomadik.h
create mode 100644 drivers/video/fbdev/amba-clcd-versatile.h
--
2.4.3
next reply other threads:[~2016-02-04 14:04 UTC|newest]
Thread overview: 71+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-04 14:04 Linus Walleij [this message]
2016-02-04 14:04 ` [PATCH 01/11] video: ARM CLCD: backlight support for OF Linus Walleij
2016-02-04 14:04 ` [PATCH 02/11] video: ARM CLCD: support DT signal inversion flags Linus Walleij
2016-02-17 18:10 ` [02/11] " Ray Jui
2016-02-19 8:46 ` Linus Walleij
2016-02-20 1:23 ` Ray Jui
2016-02-20 11:46 ` Linus Walleij
2016-02-04 14:04 ` [PATCH 03/11] video: ARM CLCD: support pads connected in reverse order Linus Walleij
2016-02-04 14:04 ` [PATCH 04/11] video: ARM CLCD: support Nomadik variant Linus Walleij
2016-02-04 14:04 ` [PATCH 05/11] video: ARM CLCD: add special board and panel hooks for Nomadik Linus Walleij
2016-02-04 14:04 ` [PATCH 06/11] Documentation/DT: add blurb for IB2 syscon to Versatile Linus Walleij
2016-02-04 14:04 ` [PATCH 07/11] Documentation/DT: add Versatile display bindings Linus Walleij
2016-02-17 9:11 ` Tomi Valkeinen
2016-02-18 20:48 ` Linus Walleij
2016-02-04 14:04 ` [PATCH 08/11] video: ARM CLCD: add special panel hook for Versatiles Linus Walleij
2016-02-04 14:04 ` [PATCH 09/11] ARM: PB11MPCore: define a standard VGA panel Linus Walleij
2016-02-04 14:04 ` [PATCH 10/11] ARM: PB1176: " Linus Walleij
2016-02-04 14:04 ` [PATCH 11/11] ARM: versatile: move CLCD configuration to device tree Linus Walleij
2016-02-17 9:09 ` Tomi Valkeinen
2016-02-17 9:41 ` Russell King - ARM Linux
2016-02-17 16:17 ` Linus Walleij
2016-02-17 21:32 ` Russell King - ARM Linux
2016-02-18 11:52 ` Tomi Valkeinen
2016-02-18 13:12 ` Russell King - ARM Linux
2016-02-18 13:37 ` Tomi Valkeinen
2016-02-18 20:31 ` Linus Walleij
2016-02-21 22:39 ` Linus Walleij
2016-02-22 15:41 ` Tomi Valkeinen
2016-02-22 15:54 ` Linus Walleij
2016-02-23 9:08 ` Linus Walleij
2016-02-23 9:34 ` Arnd Bergmann
2016-02-23 10:10 ` Linus Walleij
2016-02-23 11:22 ` Arnd Bergmann
2016-02-23 13:00 ` Tomi Valkeinen
2016-02-23 13:16 ` Linus Walleij
2016-02-23 13:38 ` Tomi Valkeinen
2016-02-24 10:53 ` Russell King - ARM Linux
2016-02-24 11:35 ` Tomi Valkeinen
2016-02-25 14:04 ` Linus Walleij
2016-02-25 16:08 ` Arnd Bergmann
2016-02-25 16:22 ` Russell King - ARM Linux
2016-02-25 16:45 ` Tomi Valkeinen
2016-02-25 16:57 ` Russell King - ARM Linux
2016-02-25 19:30 ` Linus Walleij
2016-02-26 10:47 ` Tomi Valkeinen
2016-03-05 16:57 ` Linus Walleij
2016-03-07 7:36 ` Tomi Valkeinen
2016-02-25 19:32 ` Linus Walleij
2016-02-23 9:58 ` Tomi Valkeinen
2016-02-23 10:32 ` Adam Ford
2016-02-23 10:59 ` Pantelis Antoniou
2016-02-23 11:56 ` Peter Maydell
2016-02-23 12:01 ` Russell King - ARM Linux
2016-02-23 13:45 ` Tom Rini
2016-02-23 12:45 ` Tomi Valkeinen
2016-02-23 13:49 ` Peter Maydell
2016-02-24 12:06 ` Tomi Valkeinen
2016-02-24 10:46 ` Russell King - ARM Linux
2016-02-24 11:21 ` Tomi Valkeinen
2016-02-24 11:35 ` Russell King - ARM Linux
2016-02-24 11:47 ` Tomi Valkeinen
2016-02-24 12:13 ` Pantelis Antoniou
2016-02-25 13:43 ` Linus Walleij
2016-02-25 13:56 ` Tomi Valkeinen
2016-02-25 14:35 ` Pantelis Antoniou
2016-02-25 15:36 ` Linus Walleij
2016-02-25 15:40 ` Pantelis Antoniou
2016-02-23 13:08 ` Linus Walleij
2016-02-15 23:34 ` [PATCH 00/11] CLCD Nomadik+Versatile support Linus Walleij
2016-02-16 13:29 ` Tomi Valkeinen
2016-02-16 22:30 ` Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1454594660-7532-1-git-send-email-linus.walleij@linaro.org \
--to=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).