From mboxrd@z Thu Jan 1 00:00:00 1970 From: Sudip Mukherjee Date: Wed, 18 Jan 2017 21:23:50 +0000 Subject: [PATCH] backlight: report error on failure Message-Id: <1484774630-4228-1-git-send-email-sudipm.mukherjee@gmail.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: Jingoo Han , Lee Jones , Bartlomiej Zolnierkiewicz Cc: linux-kernel@vger.kernel.org, linux-fbdev@vger.kernel.org, Sudip Mukherjee It is possible to update the backlight power and the brightness using the sysfs and on writing it either returns the count or if the callback function does not exist then returns the error code 'ENXIO'. We have a situation where the userspace client is writing to the sysfs to update the power and since the callback function exists the client receives the return value as count and considers the operation to be successful. That is correct as the write to the sysfs was successful. But there is no way to know if the actual operation was done or not. backlight_update_status() returns the error code if it fails. Pass that to the userspace client who is trying to update the power so that the client knows that the operation failed. Signed-off-by: Sudip Mukherjee --- drivers/video/backlight/backlight.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/video/backlight/backlight.c b/drivers/video/backlight/backlight.c index 288318a..74b72b5 100644 --- a/drivers/video/backlight/backlight.c +++ b/drivers/video/backlight/backlight.c @@ -146,9 +146,9 @@ static ssize_t bl_power_store(struct device *dev, struct device_attribute *attr, pr_debug("set power to %lu\n", power); if (bd->props.power != power) { bd->props.power = power; - backlight_update_status(bd); + rc = backlight_update_status(bd); } - rc = count; + rc = rc ? rc : count; } mutex_unlock(&bd->ops_lock); @@ -176,8 +176,7 @@ int backlight_device_set_brightness(struct backlight_device *bd, else { pr_debug("set brightness to %lu\n", brightness); bd->props.brightness = brightness; - backlight_update_status(bd); - rc = 0; + rc = backlight_update_status(bd); } } mutex_unlock(&bd->ops_lock); -- 2.7.4