From mboxrd@z Thu Jan 1 00:00:00 1970 From: Martin Kaiser Date: Mon, 27 Feb 2017 10:56:42 +0000 Subject: [PATCH 2/2] dt-bindings: display: imx: entry for LAUSCR Message-Id: <1488193030-13064-2-git-send-email-martin@kaiser.cx> List-Id: References: <1488193030-13064-1-git-send-email-martin@kaiser.cx> In-Reply-To: <1488193030-13064-1-git-send-email-martin@kaiser.cx> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-fbdev@vger.kernel.org Cc: Martin Kaiser , Philipp Zabel , Rob Herring , Mark Rutland , devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Allow setting the LCDC AUS Mode Control Register from the device tree. This setting is optional, the register is available only on imx21 and compatible chipsets. Signed-off-by: Martin Kaiser --- Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt b/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt index 7a5c0e2..bd5077f 100644 --- a/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt +++ b/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt @@ -13,6 +13,8 @@ Required nodes: Additional, the display node has to define properties: - bits-per-pixel: Bits per pixel - fsl,pcr: LCDC PCR value + A display node may optionally define + - fsl,lauscr: LCDC AUS Mode Control Register value (only for imx21) Optional properties: - lcd-supply: Regulator for LCD supply voltage. -- 2.1.4