From mboxrd@z Thu Jan 1 00:00:00 1970 From: Martin Kaiser Date: Fri, 21 Apr 2017 07:45:53 +0000 Subject: [PATCH 2/2 v3 resend] dt-bindings: display: imx: entry for AUS mode Message-Id: <1492760753-8374-2-git-send-email-martin@kaiser.cx> List-Id: References: <1488193030-13064-1-git-send-email-martin@kaiser.cx> <1492760753-8374-1-git-send-email-martin@kaiser.cx> In-Reply-To: <1492760753-8374-1-git-send-email-martin@kaiser.cx> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-fbdev@vger.kernel.org Cc: Bartlomiej Zolnierkiewicz , Sascha Hauer , linux-kernel@vger.kernel.org, Rob Herring , Mark Rutland , devicetree@vger.kernel.org, Martin Kaiser Allow setting the AUS mode for a display from the device tree. Use an optional boolean property. AUS mode can be set only on imx21 and compatible chipsets. Signed-off-by: Martin Kaiser Acked-by: Rob Herring --- re-sending v3, rebased against current linux-next it seems this got lost along the way, there was a bit of confusion whether to split this in two patches or not v3: use a boolean DT property instead of the register value separate patches for DT binding and code changes v2: re-sending DT bindings and code changes as one patch Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt b/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt index 7a5c0e2..cacae0e 100644 --- a/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt +++ b/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt @@ -13,6 +13,8 @@ Required nodes: Additional, the display node has to define properties: - bits-per-pixel: Bits per pixel - fsl,pcr: LCDC PCR value + A display node may optionally define + - fsl,aus_mode: boolean to enable AUS mode (only for imx21) Optional properties: - lcd-supply: Regulator for LCD supply voltage. -- 2.1.4