From mboxrd@z Thu Jan 1 00:00:00 1970 From: David Lechner Date: Sat, 29 Jul 2017 19:17:50 +0000 Subject: [PATCH 6/6] ARM: dts: da850-lego-ev3: Add node for LCD display Message-Id: <1501355870-13960-7-git-send-email-david@lechnology.com> List-Id: References: <1501355870-13960-1-git-send-email-david@lechnology.com> In-Reply-To: <1501355870-13960-1-git-send-email-david@lechnology.com> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org Cc: David Lechner , =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= , David Airlie , Rob Herring , Mark Rutland , Sekhar Nori , Kevin Hilman , linux-fbdev@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org This adds a new node for the LEGO MINDSTORMS EV3 LCD display. Signed-off-by: David Lechner --- arch/arm/boot/dts/da850-lego-ev3.dts | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) diff --git a/arch/arm/boot/dts/da850-lego-ev3.dts b/arch/arm/boot/dts/da850-lego-ev3.dts index 45983c0..249b317 100644 --- a/arch/arm/boot/dts/da850-lego-ev3.dts +++ b/arch/arm/boot/dts/da850-lego-ev3.dts @@ -249,6 +249,15 @@ 0x4c 0x00000080 0x000000f0 >; }; + + ev3_lcd_pins: pinmux_lcd { + pinctrl-single,bits = < + /* SIMO, GP2[11], GP2[12], CLK */ + 0x14 0x00188100 0x00ffff00 + /* GP5[0] */ + 0x30 0x80000000 0xf0000000 + >; + }; }; &pinconf { @@ -357,6 +366,21 @@ }; }; +&spi1 { + status = "okay"; + pinctrl-0 = <&ev3_lcd_pins>; + pinctrl-names = "default"; + cs-gpios = <&gpio 44 GPIO_ACTIVE_LOW>; + + display@0{ + compatible = "lego,ev3-lcd"; + reg = <0>; + spi-max-frequency = <10000000>; + dc-gpios = <&gpio 43 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio 80 GPIO_ACTIVE_HIGH>; + }; +}; + &ehrpwm0 { status = "okay"; }; -- 2.7.4