From: Oliver Graute <oliver.graute@gmail.com>
To: gregkh@linuxfoundation.org
Cc: devel@driverdev.osuosl.org, linux-fbdev@vger.kernel.org,
Oliver Graute <oliver.graute@kococonnector.com>,
linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
oliver.graute@gmail.com, dan.carpenter@oracle.com
Subject: [PATCH v2] staging: fbtft: fb_st7789v: Initialize the Display
Date: Wed, 13 May 2020 14:30:46 +0000 [thread overview]
Message-ID: <1589380299-21871-1-git-send-email-oliver.graute@gmail.com> (raw)
From: Oliver Graute <oliver.graute@kococonnector.com>
Set Gamma Values and Register Values for the HSD20_IPS Panel
Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com>
---
need information howto set HSD20_IPS Panel at run time and not at compile time
Changes for v2:
- added define for HSD20_IPS_GAMMA values
- check for HSD20_IPS define
- enabled MIPI_DCS_ENTER_INVERT_MODE
drivers/staging/fbtft/fb_st7789v.c | 32 +++++++++++++++++++++++++-----
1 file changed, 27 insertions(+), 5 deletions(-)
diff --git a/drivers/staging/fbtft/fb_st7789v.c b/drivers/staging/fbtft/fb_st7789v.c
index 3c3f387936e8..ebc17e05ecd0 100644
--- a/drivers/staging/fbtft/fb_st7789v.c
+++ b/drivers/staging/fbtft/fb_st7789v.c
@@ -20,6 +20,12 @@
"70 2C 2E 15 10 09 48 33 53 0B 19 18 20 25\n" \
"70 2C 2E 15 10 09 48 33 53 0B 19 18 20 25"
+#define HSD20_IPS_GAMMA \
+ "D0 05 0A 09 08 05 2E 44 45 0F 17 16 2B 33\n" \
+ "D0 05 0A 09 08 05 2E 43 45 0F 16 16 2B 33"
+
+#define HSD20_IPS "true"
+
/**
* enum st7789v_command - ST7789V display controller commands
*
@@ -82,14 +88,20 @@ static int init_display(struct fbtft_par *par)
/* set pixel format to RGB-565 */
write_reg(par, MIPI_DCS_SET_PIXEL_FORMAT, MIPI_DCS_PIXEL_FMT_16BIT);
+ if (HSD20_IPS)
+ write_reg(par, PORCTRL, 0x05, 0x05, 0x00, 0x33, 0x33);
- write_reg(par, PORCTRL, 0x08, 0x08, 0x00, 0x22, 0x22);
+ else
+ write_reg(par, PORCTRL, 0x08, 0x08, 0x00, 0x22, 0x22);
/*
* VGH = 13.26V
* VGL = -10.43V
*/
- write_reg(par, GCTRL, 0x35);
+ if (HSD20_IPS)
+ write_reg(par, GCTRL, 0x75);
+ else
+ write_reg(par, GCTRL, 0x35);
/*
* VDV and VRH register values come from command write
@@ -101,13 +113,19 @@ static int init_display(struct fbtft_par *par)
* VAP = 4.1V + (VCOM + VCOM offset + 0.5 * VDV)
* VAN = -4.1V + (VCOM + VCOM offset + 0.5 * VDV)
*/
- write_reg(par, VRHS, 0x0B);
+ if (HSD20_IPS)
+ write_reg(par, VRHS, 0x13);
+ else
+ write_reg(par, VRHS, 0x0B);
/* VDV = 0V */
write_reg(par, VDVS, 0x20);
/* VCOM = 0.9V */
- write_reg(par, VCOMS, 0x20);
+ if (HSD20_IPS)
+ write_reg(par, VCOMS, 0x22);
+ else
+ write_reg(par, VCOMS, 0x20);
/* VCOM offset = 0V */
write_reg(par, VCMOFSET, 0x20);
@@ -120,6 +138,10 @@ static int init_display(struct fbtft_par *par)
write_reg(par, PWCTRL1, 0xA4, 0xA1);
write_reg(par, MIPI_DCS_SET_DISPLAY_ON);
+
+ if (HSD20_IPS)
+ write_reg(par, MIPI_DCS_ENTER_INVERT_MODE);
+
return 0;
}
@@ -234,7 +256,7 @@ static struct fbtft_display display = {
.height = 320,
.gamma_num = 2,
.gamma_len = 14,
- .gamma = DEFAULT_GAMMA,
+ .gamma = HSD20_IPS_GAMMA,
.fbtftops = {
.init_display = init_display,
.set_var = set_var,
--
2.17.1
reply other threads:[~2020-05-13 14:30 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1589380299-21871-1-git-send-email-oliver.graute@gmail.com \
--to=oliver.graute@gmail.com \
--cc=dan.carpenter@oracle.com \
--cc=devel@driverdev.osuosl.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-fbdev@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=oliver.graute@kococonnector.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).