* [2.5.59] radeonfb not working
@ 2003-01-29 15:27 Kronos
2003-01-29 18:20 ` Ani Joshi
2003-02-12 20:04 ` James Simmons
0 siblings, 2 replies; 4+ messages in thread
From: Kronos @ 2003-01-29 15:27 UTC (permalink / raw)
To: linux-fbdev-devel
Hi,
I've a Radeon 9500 Pro board and framebuffer isn't working. If I boot
with "video=radeon" monitor complains about "Out of scan range". This is
from the bootlog:
radeonfb_pci_register BEGIN
radeonfb: ref_clk=2700, ref_div=67, xclk=16600 defaults
radeonfb: probed SDR SGRAM 131072k videoram
radeon_get_moninfo: bios 4 scratch = 2000002
radeonfb: ATI Radeon 9700 NE SDR SGRAM 128 MB
radeonfb: DVI port no monitor connected
radeonfb: CRT port CRT monitor connected
radeonfb_pci_register END
hStart = 664, hEnd = 760, hTotal = 800
vStart = 491, vEnd = 493, vTotal = 525
h_total_disp = 0x4f0063 hsync_strt_wid = 0x8c02a2
v_total_disp = 0x1df020c vsync_strt_wid = 0x8201ea
post div = 0x8
fb_div = 0x1f4
ppll_div_3 = 0x301f4
ron = 1024, roff = 23632
vclk_freq = 2519, per = 844
Console: switching to colour frame buffer device 80x30
If I append a specific video mode I'll get "out of scan
range" or "no signal" depending on the video mode. This is
"video=radeon:640x480-16@85" (no signal):
radeonfb_pci_register BEGIN
radeonfb: ref_clk=2700, ref_div=67, xclk=16600 defaults
radeonfb: probed SDR SGRAM 131072k videoram
radeon_get_moninfo: bios 4 scratch = 2000002
radeonfb: ATI Radeon 9700 NE SDR SGRAM 128 MB
radeonfb: DVI port no monitor connected
radeonfb: CRT port CRT monitor connected
radeonfb_pci_register END
hStart = 696, hEnd = 752, hTotal = 832
vStart = 481, vEnd = 484, vTotal = 509
h_total_disp = 0x4f0067 hsync_strt_wid = 0x8702b9
v_total_disp = 0x1df01fc vsync_strt_wid = 0x8301e0
post div = 0x4
fb_div = 0x165
ppll_div_3 = 0x20165
ron = 960, roff = 16548
vclk_freq = 3597, per = 591
Console: switching to colour frame buffer device 80x30
ciao,
Luca
--
Reply-To: kronos@kronoz.cjb.net
Home: http://kronoz.cjb.net
Il coraggio non mi manca.
E` la paura che mi frega...
-------------------------------------------------------
This SF.NET email is sponsored by:
SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See!
http://www.vasoftware.com
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [2.5.59] radeonfb not working
2003-01-29 15:27 [2.5.59] radeonfb not working Kronos
@ 2003-01-29 18:20 ` Ani Joshi
2003-02-12 20:04 ` James Simmons
1 sibling, 0 replies; 4+ messages in thread
From: Ani Joshi @ 2003-01-29 18:20 UTC (permalink / raw)
To: Kronos; +Cc: linux-fbdev-devel
> radeonfb: ref_clk=2700, ref_div=67, xclk=16600 defaults
This line here says that radeonfb didn't acquire the pll clock values from
your BIOS properly and is using defaults, which are for the 1st gen
Radeon. Is anyone else with a 9500 (or 9700) using radeonfb and can get
values from their BIOS? (radeonfb will say "from BIOS" if it got them
properly). This will explain your "out of scan range" problem because it
is not setting the mode right.
ani
On Wed, 29 Jan 2003, Kronos wrote:
> Hi,
> I've a Radeon 9500 Pro board and framebuffer isn't working. If I boot
> with "video=radeon" monitor complains about "Out of scan range". This is
> from the bootlog:
>
> radeonfb_pci_register BEGIN
> radeonfb: ref_clk=2700, ref_div=67, xclk=16600 defaults
> radeonfb: probed SDR SGRAM 131072k videoram
> radeon_get_moninfo: bios 4 scratch = 2000002
> radeonfb: ATI Radeon 9700 NE SDR SGRAM 128 MB
> radeonfb: DVI port no monitor connected
> radeonfb: CRT port CRT monitor connected
> radeonfb_pci_register END
> hStart = 664, hEnd = 760, hTotal = 800
> vStart = 491, vEnd = 493, vTotal = 525
> h_total_disp = 0x4f0063 hsync_strt_wid = 0x8c02a2
> v_total_disp = 0x1df020c vsync_strt_wid = 0x8201ea
> post div = 0x8
> fb_div = 0x1f4
> ppll_div_3 = 0x301f4
> ron = 1024, roff = 23632
> vclk_freq = 2519, per = 844
> Console: switching to colour frame buffer device 80x30
>
> If I append a specific video mode I'll get "out of scan
> range" or "no signal" depending on the video mode. This is
> "video=radeon:640x480-16@85" (no signal):
>
> radeonfb_pci_register BEGIN
> radeonfb: ref_clk=2700, ref_div=67, xclk=16600 defaults
> radeonfb: probed SDR SGRAM 131072k videoram
> radeon_get_moninfo: bios 4 scratch = 2000002
> radeonfb: ATI Radeon 9700 NE SDR SGRAM 128 MB
> radeonfb: DVI port no monitor connected
> radeonfb: CRT port CRT monitor connected
> radeonfb_pci_register END
> hStart = 696, hEnd = 752, hTotal = 832
> vStart = 481, vEnd = 484, vTotal = 509
> h_total_disp = 0x4f0067 hsync_strt_wid = 0x8702b9
> v_total_disp = 0x1df01fc vsync_strt_wid = 0x8301e0
> post div = 0x4
> fb_div = 0x165
> ppll_div_3 = 0x20165
> ron = 960, roff = 16548
> vclk_freq = 3597, per = 591
> Console: switching to colour frame buffer device 80x30
>
> ciao,
> Luca
> --
> Reply-To: kronos@kronoz.cjb.net
> Home: http://kronoz.cjb.net
> Il coraggio non mi manca.
> E` la paura che mi frega...
>
>
> -------------------------------------------------------
> This SF.NET email is sponsored by:
> SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See!
> http://www.vasoftware.com
> _______________________________________________
> Linux-fbdev-devel mailing list
> Linux-fbdev-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/linux-fbdev-devel
>
-------------------------------------------------------
This SF.NET email is sponsored by:
SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See!
http://www.vasoftware.com
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [2.5.59] radeonfb not working
2003-01-29 15:27 [2.5.59] radeonfb not working Kronos
2003-01-29 18:20 ` Ani Joshi
@ 2003-02-12 20:04 ` James Simmons
2003-02-14 22:33 ` Kronos
1 sibling, 1 reply; 4+ messages in thread
From: James Simmons @ 2003-02-12 20:04 UTC (permalink / raw)
To: Kronos; +Cc: linux-fbdev-devel
> If I append a specific video mode I'll get "out of scan
> range" or "no signal" depending on the video mode. This is
> "video=radeon:640x480-16@85" (no signal):
Ug. The default mode in the modeb must be not supported by your card. Can
you try lowering the value for 85.
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [2.5.59] radeonfb not working
2003-02-12 20:04 ` James Simmons
@ 2003-02-14 22:33 ` Kronos
0 siblings, 0 replies; 4+ messages in thread
From: Kronos @ 2003-02-14 22:33 UTC (permalink / raw)
To: James Simmons; +Cc: linux-fbdev-devel
Il Wed, Feb 12, 2003 at 08:04:19PM +0000, James Simmons ha scritto:
> > If I append a specific video mode I'll get "out of scan
> > range" or "no signal" depending on the video mode. This is
> > "video=radeon:640x480-16@85" (no signal):
>
> Ug. The default mode in the modeb must be not supported by your card. Can
> you try lowering the value for 85.
I tried 75, 70, 60 without success. Btw both monitor and video card can
handle 640x480@85Hz (the monitor can go up to 100Hz).
Luca
--
Reply-To: kronos@kronoz.cjb.net
Home: http://kronoz.cjb.net
-------------------------------------------------------
This SF.NET email is sponsored by: FREE SSL Guide from Thawte
are you planning your Web Server Security? Click here to get a FREE
Thawte SSL guide and find the answers to all your SSL security issues.
http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0026en
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2003-02-14 22:34 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2003-01-29 15:27 [2.5.59] radeonfb not working Kronos
2003-01-29 18:20 ` Ani Joshi
2003-02-12 20:04 ` James Simmons
2003-02-14 22:33 ` Kronos
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).