linux-fbdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sven Luther <sven.luther@wanadoo.fr>
To: Sven Luther <sven.luther@wanadoo.fr>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>,
	Linux Fbdev development list
	<linux-fbdev-devel@lists.sourceforge.net>
Subject: Re: radeonfb on pegasos powerpc motherboard and X endianess problem
Date: Tue, 10 Jun 2003 12:45:58 +0200	[thread overview]
Message-ID: <20030610104558.GA4650@iliana> (raw)
In-Reply-To: <20030610095442.GA3980@iliana>

On Tue, Jun 10, 2003 at 11:54:42AM +0200, Sven Luther wrote:
> On Thu, Jun 05, 2003 at 09:59:47AM +0200, Benjamin Herrenschmidt wrote:
> > On Wed, 2003-06-04 at 16:54, Sven Luther wrote:
> > > Hello,
> > > 
> > > I finally have a working pegasos motherboard as well as a working kernel
> > > with a 1.6 radeonfb. I have also installed Daniel Stone's X 4.3.0
> > > debian/sid packages, and notice the following :
> > > 
> > >   1) radeonfb works fine in 8bpp and 32bpp but depth 15 and 16 only give
> > >   me some very dark grey.
> > 
> > Can you try my devel tree version ?
> > 
> > (rsync.penguinppc.org::benh-devel)
> 
> Nope, it did fail with :
> 
> radeonfb.c: Dans la fonction « radeonfb_pci_register »:
> radeonfb.c:1106: « FP2_GEN_CNTL » non déclaré (première utilisation dans cette fonction)
> radeonfb.c:1106: (Chaque identificateur non déclaré est rapporté une seule fois
> radeonfb.c:1106: pour chaque fonction dans laquelle il apparaît.)
> radeonfb.c:1108: « TMDS_CNTL » non déclaré (première utilisation dans cette fonction)
> radeonfb.c:1110: « DAC_CNTL2 » non déclaré (première utilisation dans cette fonction)
> radeonfb.c: Dans la fonction « radeon_engine_init »:
> radeonfb.c:1893: « DST_PITCH_OFFSET » non déclaré (première utilisation dans cette fonction)
> radeonfb.c: Dans la fonction « radeon_setcolreg »:
> radeonfb.c:2794: « DAC_CNTL2 » non déclaré (première utilisation dans cette fonction)
> radeonfb.c:2795: « DAC2_PALETTE_ACCESS_CNTL » non déclaré (première utilisation dans cette fonction)
> radeonfb.c: Dans la fonction « radeon_load_video_mode »:
> radeonfb.c:3051: « NONSURF_AP1_SWP_16BPP » non déclaré (première utilisation dans cette fonction)
> radeonfb.c:3056: « NONSURF_AP1_SWP_32BPP » non déclaré (première utilisation dans cette fonction)
> radeonfb.c:3216: « TMDS_ICHCSEL » non déclaré (première utilisation dans cette fonction)
> 
> Altough i am not entirely sure which rsync tree i used, will check again
> to make sure.

No, it was not the right tree, now it builds, but with the following
warning :

gcc-3.2 -D__KERNEL__
-I/home/luther/pegasos/2.4.18-rc4/linuxpegasos/include -Wall
-Wstrict-prototypes -Wno-trigraphs -O2 -fomit-frame-pointer
-fno-strict-aliasing -fno-common
-I/home/luther/pegasos/2.4.18-rc4/linuxpegasos/arch/ppc -fsigned-char
-msoft-float -pipe -ffixed-r2 -Wno-uninitialized -mmultiple -mstring
-DKBUILD_BASENAME=radeonfb  -c -o radeonfb.o radeonfb.c
radeonfb.c:859: AVERTISSEMENT: « OUTMC » déclaré «static » mais n'a jamais été défiie
radeonfb.c:860: AVERTISSEMENT: « INMC » déclaré «static » mais n'a jamais été défiie
radeonfb.c:861: AVERTISSEMENT: « radeon_pm_disable_dynamic_mode » déclaré «static » mais n'a jamais été défiie
radeonfb.c:862: AVERTISSEMENT: « radeon_pm_enable_dynamic_mode » déclaré «static » mais n'a jamais été défiie
radeonfb.c:863: AVERTISSEMENT: « radeon_pm_yclk_mclk_sync » déclaré «static » mais n'a jamais été défiie
radeonfb.c:864: AVERTISSEMENT: « radeon_pm_program_mode_reg » déclaré «static » mais n'a jamais été défiie
radeonfb.c:865: AVERTISSEMENT: « radeon_pm_enable_dll » déclaré «static » mais n'a jamais été défiie
radeonfb.c:866: AVERTISSEMENT: « radeon_pm_full_reset_sdram » déclaré «static » mais n'a jamais été défiie

I suppose this is either harmless or due to the pegasos patch disabling
config_all_ppc or something such, will try it out, and look at it more
in detail this WE.

Friendly,

Sven Luther


-------------------------------------------------------
This SF.net email is sponsored by:  Etnus, makers of TotalView, The best
thread debugger on the planet. Designed with thread debugging features
you've never dreamed of, try TotalView 6 free at www.etnus.com.

      reply	other threads:[~2003-06-10 10:46 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2003-06-04 14:54 radeonfb on pegasos powerpc motherboard and X endianess problem Sven Luther
2003-06-04 15:27 ` Michel Dänzer
2003-06-04 15:39   ` Sven Luther
2003-06-05  8:01     ` Benjamin Herrenschmidt
2003-06-05  7:59 ` Benjamin Herrenschmidt
2003-06-05  8:19   ` Sven Luther
2003-06-05 11:42     ` Benjamin Herrenschmidt
2003-06-05 11:58       ` Sven Luther
2003-06-05 12:27         ` Benjamin Herrenschmidt
2003-06-05 13:12           ` Sven Luther
2003-06-06  6:02             ` Geert Uytterhoeven
2003-06-06  6:30               ` Sven Luther
2003-06-06  6:35                 ` Geert Uytterhoeven
2003-06-06  6:41                   ` Sven Luther
2003-06-10 11:04                     ` Jochen Roth
2003-06-13  9:27                       ` Michel Dänzer
2003-06-13 10:05                         ` Jochen Roth
2003-06-13 16:57                           ` Michel Dänzer
2003-06-06  6:00       ` radeonfb on pegasos powerpc motherboard and " Geert Uytterhoeven
2003-06-06  5:58     ` Geert Uytterhoeven
2003-06-10  9:54   ` Sven Luther
2003-06-10 10:45     ` Sven Luther [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20030610104558.GA4650@iliana \
    --to=sven.luther@wanadoo.fr \
    --cc=benh@kernel.crashing.org \
    --cc=linux-fbdev-devel@lists.sourceforge.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).