From mboxrd@z Thu Jan 1 00:00:00 1970 From: Thorsten Kranzkowski Subject: Re: fbdv/fbcon pending problems Date: Mon, 23 Feb 2004 20:35:28 +0000 Sender: linux-kernel-owner@vger.kernel.org Message-ID: <20040223203528.E433@Marvin.DL8BCU.ampr.org> References: <1077497593.5960.28.camel@gaston> Reply-To: dl8bcu@dl8bcu.de Mime-Version: 1.0 Return-path: In-Reply-To: <1077497593.5960.28.camel@gaston>; from benh@kernel.crashing.org on Mon, Feb 23, 2004 at 11:53:14AM +1100 List-Id: Cc: James Simmons , Linux Fbdev development list , Linux Kernel list On Mon, Feb 23, 2004 at 11:53:14AM +1100, Benjamin Herrenschmidt wrote: > - mach64 lockups on LT-G (I'll try on an LT-Pro soon) plus other > mach64 bugs in the new version in the bk fbdev, I'll have a patch for > some of the problems, but I didn't find a good explanation for the > accel lockups yet Question: Is fbdev supposed to work without BIOS? I have an ATI Technologies Inc 3D Rage Pro 215GP in an Alpha AXPpci33, currently running with MILO as firmware/bootloader. For several reasons I want to change to the original SRM firmware. Unfortunately its intel_cpu/BIOS emulation locks up on the ATI BIOS. With the BIOS disabled the SRM succeeds loading the kernel. fbdev seems to initialize _something_, i.e. the monitor wakes up ans displays a stable repeating pattern of vertical stripes. But it hangs the machine after these lines on serial console: fb0: ATY Mach64 frame buffer device on PCI Installing knfsd (copyright (C) 1996 okir@monad.swb.de). Booting the same kernel image (2.6.[13]) with MILO (which has a different cpu emulation that succeeds executing the BIOS) works fine with fbdev. Bye, Thorsten -- | Thorsten Kranzkowski Internet: dl8bcu@dl8bcu.de | | Mobile: ++49 170 1876134 Snail: Kiebitzstr. 14, 49324 Melle, Germany | | Ampr: dl8bcu@db0lj.#rpl.deu.eu, dl8bcu@marvin.dl8bcu.ampr.org [44.130.8.19] |