On Sun, May 02, 2004 at 10:46:35PM +0200, Alexander Kern wrote:
> Am Samstag, 1. Mai 2004 23:40 schrieb Ville Syrjälä:
> >
> > Does someone have an atyfb-only patch against mm?
> No, I wait for James website.

No matter. I just dropped the driver from fbdev-2.5 to mm and it seems to 
work fine for the most part. I had to disable hw cursor because it oopsed 
due to missing info->cursor.image.data. Just setting it to 
cursor->image.data allowed me to boot but the cursor wasn't working right 
so I just made it use the sw cursor instead.


Now my only problem is with XCLK on my Mobility. The BIOS inits the chip 
to use ~63 MHz XCLK but atyfb claims that the BIOS tables specify 125 MHz. 
The laptop in question is a HP OmniBook 6000 and there are two models: 
full model with 125 MHz XCLK + 8MB SDRAM, and the crippled model with 
XCLK cut in half + 4MB SDRAM (32-bit).

I have attached an XFree86 log with the BIOS dump if someone can figure 
out if it contains something that would help autodetect the XCLK. If this 
doesn't help I can bug my friend for the 125 MHz model BIOS dump for 
comparison.

-- 
Ville Syrjälä
syrjala@sci.fi
http://www.sci.fi/~syrjala/