From mboxrd@z Thu Jan 1 00:00:00 1970 From: Andrew Walrond Subject: Re: Rivafb won't work with DVI connector Date: Tue, 23 Nov 2004 16:08:19 +0000 Message-ID: <200411231608.19517.andrew@walrond.org> References: <200411191137.14649.andrew@walrond.org> <200411231509.24489.andrew@walrond.org> <200411232318.00795.adaplas@hotpop.com> Reply-To: linux-fbdev-devel@lists.sourceforge.net Mime-Version: 1.0 Content-Transfer-Encoding: 7bit Return-path: Received: from sc8-sf-mx1-b.sourceforge.net ([10.3.1.11] helo=sc8-sf-mx1.sourceforge.net) by sc8-sf-list1.sourceforge.net with esmtp (Exim 4.30) id 1CWdDZ-0004SF-Mu for linux-fbdev-devel@lists.sourceforge.net; Tue, 23 Nov 2004 08:08:37 -0800 Received: from [62.24.231.113] (helo=cenedra.walrond.org) by sc8-sf-mx1.sourceforge.net with esmtp (TLSv1:AES256-SHA:256) (Exim 4.41) id 1CWdDW-0002QF-M0 for linux-fbdev-devel@lists.sourceforge.net; Tue, 23 Nov 2004 08:08:37 -0800 In-Reply-To: <200411232318.00795.adaplas@hotpop.com> Content-Disposition: inline Sender: linux-fbdev-devel-admin@lists.sourceforge.net Errors-To: linux-fbdev-devel-admin@lists.sourceforge.net List-Unsubscribe: , List-Id: List-Post: List-Help: List-Subscribe: , List-Archive: Content-Type: text/plain; charset="us-ascii" To: linux-fbdev-devel@lists.sourceforge.net Cc: "Antonino A. Daplas" On Tuesday 23 Nov 2004 15:18, Antonino A. Daplas wrote: > On Tuesday 23 November 2004 23:09, Andrew Walrond wrote: > > On Tuesday 23 Nov 2004 14:28, Antonino A. Daplas wrote: > > > Okay, try the attached patch. > > > > Ok, booting on dsub without params now results in a good 1024x768 > > (128x48) console and boots cleanly. (Note this was a 1600x1200 > > (200xwhatever) before the patch, which is the preferred, native > > resolution of the screen.) > Actually, I think this is die to having both dsub and dvi attached during that test. Just dsub boots to 1600x1200 as before > Can you enable debugging in drivers/video/fbmon.c? Just change the "undef" > to define in this line: > > #undef DEBUG /* define this for verbose EDID parsing output */ > > Send me the dmesg output for both dvi and dsub. > DSUB nvidiafb: nVidia device/chipset 10DE0250 nvidiafb: nVidia Corporation NV25 [GeForce4 Ti 4600] i2c_adapter i2c-0: registered as adapter #0 i2c_adapter i2c-1: registered as adapter #1 i2c_adapter i2c-2: registered as adapter #2 nvidiafb: CRTC0 not found nvidiafb: CRTC1 found i2c_adapter i2c-0: master_xfer: with 2 msgs. i2c_adapter i2c-0: master_xfer: with 2 msgs. i2c_adapter i2c-0: master_xfer: with 2 msgs. i2c_adapter i2c-1: master_xfer: with 2 msgs. nvidiafb: EDID found from BUS2 ======================================== Display Information (EDID) ======================================== EDID Version 1.3 Manufacturer: IVM Model: 4800 Serial#: 95 Year: 2001 Week 44 Monitor Name: iiyama Monitor Name: AU4831D Display Characteristics: Monitor Operating Limits: From EDID H: 24-80KHz V: 50-85Hz DCLK: 170MHz Analog Display Input: Input Voltage - 0.700V/0.000V Sync: Separate Composite Max H-size in cm: 39 Max V-size in cm: 29 Gamma: 2.20 DPMS: Active yes, Suspend yes, Standby yes RGB Color Display Chroma RedX: 0.619 RedY: 0.340 GreenX: 0.279 GreenY: 0.600 BlueX: 0.140 BlueY: 0.090 WhiteX: 0.289 WhiteY: 0.300 First DETAILED Timing is preferred Supported VESA Modes 720x400@70Hz 640x480@60Hz 640x480@67Hz 640x480@72Hz 640x480@75Hz 800x600@56Hz 800x600@60Hz 800x600@72Hz 800x600@75Hz 832x624@75Hz 1024x768@60Hz 1024x768@70Hz 1024x768@75Hz 1280x1024@75Hz Manufacturer's mask: 0 Standard Timings 1600x1200@60Hz 1280x1024@60Hz 1280x1024@70Hz 1152x864@75Hz 1152x864@85Hz 1024x768@66Hz 1024x768@70Hz 1024x768@85Hz Detailed Timings 162 MHz 1600 1664 1856 2160 1200 1201 1204 1250 +HSync +VSync ======================================== nvidiafb: CRTC 0appears to have a CRT attached nvidiafb: Using CRT on CRTC 0 nvidiafb: MTRR set to ON Console: switching to colour frame buffer device 200x75 nvidiafb: PCI nVidia NV25 framebuffer (128MB @ 0xE0000000) DVI nvidiafb: nVidia device/chipset 10DE0250 nvidiafb: nVidia Corporation NV25 [GeForce4 Ti 4600] i2c_adapter i2c-0: registered as adapter #0 i2c_adapter i2c-1: registered as adapter #1 i2c_adapter i2c-2: registered as adapter #2 nvidiafb: CRTC0 not found nvidiafb: CRTC1 not found i2c_adapter i2c-0: master_xfer: with 2 msgs. nvidiafb: EDID found from BUS1 ======================================== Display Information (EDID) ======================================== EDID Version 1.3 Manufacturer: IVM Model: 4800 Serial#: 1001 Year: 2002 Week 1 Monitor Name: iiyama Display Characteristics: Monitor Operating Limits: From EDID H: 30-80KHz V: 56-85Hz DCLK: 170MHz Digital Display Input Sync: Serration on Max H-size in cm: 39 Max V-size in cm: 29 Gamma: 2.20 DPMS: Active yes, Suspend yes, Standby yes RGB Color Display Chroma RedX: 0.619 RedY: 0.340 GreenX: 0.279 GreenY: 0.600 BlueX: 0.140 BlueY: 0.090 WhiteX: 0.289 WhiteY: 0.300 First DETAILED Timing is preferred Supported VESA Modes 720x400@70Hz 640x480@60Hz 640x480@67Hz 640x480@72Hz 640x480@75Hz 800x600@56Hz 800x600@60Hz 800x600@72Hz 800x600@75Hz 832x624@75Hz 1024x768@60Hz 1024x768@70Hz 1024x768@75Hz 1280x1024@75Hz 1152x870@75Hz Manufacturer's mask: 0 Standard Timings 1280x1024@60Hz 1024x819@85Hz 800x640@85Hz 640x512@85Hz Detailed Timings 65 MHz 1024 1040 1104 1344 768 781 783 817 -HSync -VSync 162 MHz 1600 1664 1856 2160 1200 1201 1204 1250 +HSync +VSync ======================================== i2c_adapter i2c-1: master_xfer: with 2 msgs. i2c_adapter i2c-1: master_xfer: with 2 msgs. i2c_adapter i2c-1: master_xfer: with 2 msgs. nvidiafb: CRTC 1 is currently programmed for DFP nvidiafb: Using DFP on CRTC 1 Panel size is 1024 x 768 nvidiafb: MTRR set to ON Console: switching to colour frame buffer device 80x30 nvidiafb: PCI nVidia NV25 framebuffer (128MB @ 0xE0000000) ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://productguide.itmanagersjournal.com/