From: Andrew Walrond <andrew@walrond.org>
To: linux-fbdev-devel@lists.sourceforge.net
Cc: "Antonino A. Daplas" <adaplas@hotpop.com>
Subject: Re: Rivafb won't work with DVI connector
Date: Tue, 23 Nov 2004 18:01:14 +0000 [thread overview]
Message-ID: <200411231801.14328.andrew@walrond.org> (raw)
In-Reply-To: <200411240107.13362.adaplas@hotpop.com>
On Tuesday 23 Nov 2004 17:07, Antonino A. Daplas wrote:
>
> Okay, I think I this should fix the dvi misdetection, and I think it should
> also fix the preferred timing of 1600x1200 even if both dsub and dvi are
> attached. Try the attached patch.
>
Not quite, but close...
With just dsub and no params, we get a perfect 1600x1200 (200x75) console
nvidiafb: nVidia device/chipset 10DE0250
nvidiafb: nVidia Corporation NV25 [GeForce4 Ti 4600]
i2c_adapter i2c-0: registered as adapter #0
i2c_adapter i2c-1: registered as adapter #1
i2c_adapter i2c-2: registered as adapter #2
nvidiafb: CRTC0 not found
nvidiafb: CRTC1 found
i2c_adapter i2c-0: master_xfer: with 2 msgs.
i2c_adapter i2c-0: master_xfer: with 2 msgs.
i2c_adapter i2c-0: master_xfer: with 2 msgs.
i2c_adapter i2c-1: master_xfer: with 2 msgs.
nvidiafb: EDID found from BUS2
========================================
Display Information (EDID)
========================================
EDID Version 1.3
Manufacturer: IVM
Model: 4800
Serial#: 95
Year: 2001 Week 44
Monitor Name: iiyama
Monitor Name: AU4831D
Display Characteristics:
Monitor Operating Limits: From EDID
H: 24-80KHz V: 50-85Hz DCLK: 170MHz
Analog Display Input: Input Voltage - 0.700V/0.000V
Sync: Separate Composite
Max H-size in cm: 39
Max V-size in cm: 29
Gamma: 2.20
DPMS: Active yes, Suspend yes, Standby yes
RGB Color Display
Chroma
RedX: 0.619 RedY: 0.340
GreenX: 0.279 GreenY: 0.600
BlueX: 0.140 BlueY: 0.090
WhiteX: 0.289 WhiteY: 0.300
First DETAILED Timing is preferred
Supported VESA Modes
720x400@70Hz
640x480@60Hz
640x480@67Hz
640x480@72Hz
640x480@75Hz
800x600@56Hz
800x600@60Hz
800x600@72Hz
800x600@75Hz
832x624@75Hz
1024x768@60Hz
1024x768@70Hz
1024x768@75Hz
1280x1024@75Hz
Manufacturer's mask: 0
Standard Timings
1600x1200@60Hz
1280x1024@60Hz
1280x1024@70Hz
1152x864@75Hz
1152x864@85Hz
1024x768@66Hz
1024x768@70Hz
1024x768@85Hz
Detailed Timings
162 MHz 1600 1664 1856 2160 1200 1201 1204 1250 +HSync +VSync
========================================
nvidiafb: CRTC 0appears to have a CRT attached
nvidiafb: Using CRT on CRTC 0
nvidiafb: MTRR set to ON
Console: switching to colour frame buffer device 200x75
nvidiafb: PCI nVidia NV25 framebuffer (128MB @ 0xE0000000)
With both dsub and dvi, another perfect 1600x1200 console. (first EDID
truncated due to dmesg log not big enough; I can fix this if you need)
1024x768@60Hz
1024x768@70Hz
1024x768@75Hz
1280x1024@75Hz
1152x870@75Hz
Manufacturer's mask: 0
Standard Timings
1280x1024@60Hz
1024x819@85Hz
800x640@85Hz
640x512@85Hz
Detailed Timings
65 MHz 1024 1040 1104 1344 768 781 783 817 -HSync -VSync
162 MHz 1600 1664 1856 2160 1200 1201 1204 1250 +HSync +VSync
========================================
i2c_adapter i2c-1: master_xfer: with 2 msgs.
nvidiafb: EDID found from BUS2
========================================
Display Information (EDID)
========================================
EDID Version 1.3
Manufacturer: IVM
Model: 4800
Serial#: 95
Year: 2001 Week 44
Monitor Name: iiyama
Monitor Name: AU4831D
Display Characteristics:
Monitor Operating Limits: From EDID
H: 24-80KHz V: 50-85Hz DCLK: 170MHz
Analog Display Input: Input Voltage - 0.700V/0.000V
Sync: Separate Composite
Max H-size in cm: 39
Max V-size in cm: 29
Gamma: 2.20
DPMS: Active yes, Suspend yes, Standby yes
RGB Color Display
Chroma
RedX: 0.619 RedY: 0.340
GreenX: 0.279 GreenY: 0.600
BlueX: 0.140 BlueY: 0.090
WhiteX: 0.289 WhiteY: 0.300
First DETAILED Timing is preferred
Supported VESA Modes
720x400@70Hz
640x480@60Hz
640x480@67Hz
640x480@72Hz
640x480@75Hz
800x600@56Hz
800x600@60Hz
800x600@72Hz
800x600@75Hz
832x624@75Hz
1024x768@60Hz
1024x768@70Hz
1024x768@75Hz
1280x1024@75Hz
Manufacturer's mask: 0
Standard Timings
1600x1200@60Hz
1280x1024@60Hz
1280x1024@70Hz
1152x864@75Hz
1152x864@85Hz
1024x768@66Hz
1024x768@70Hz
1024x768@85Hz
Detailed Timings
162 MHz 1600 1664 1856 2160 1200 1201 1204 1250 +HSync +VSync
========================================
nvidiafb: CRTC 0appears to have a CRT attached
nvidiafb: Using CRT on CRTC 0
nvidiafb: MTRR set to ON
Console: switching to colour frame buffer device 200x75
With dvi connection and no params, I get a fully working console, but at
1024x768 (128x48)
nvidiafb: nVidia device/chipset 10DE0250
nvidiafb: nVidia Corporation NV25 [GeForce4 Ti 4600]
i2c_adapter i2c-0: registered as adapter #0
i2c_adapter i2c-1: registered as adapter #1
i2c_adapter i2c-2: registered as adapter #2
nvidiafb: CRTC0 not found
nvidiafb: CRTC1 not found
i2c_adapter i2c-0: master_xfer: with 2 msgs.
nvidiafb: EDID found from BUS1
========================================
Display Information (EDID)
========================================
EDID Version 1.3
Manufacturer: IVM
Model: 4800
Serial#: 1001
Year: 2002 Week 1
Monitor Name: iiyama
Display Characteristics:
Monitor Operating Limits: From EDID
H: 30-80KHz V: 56-85Hz DCLK: 170MHz
Digital Display Input
Sync: Serration on
Max H-size in cm: 39
Max V-size in cm: 29
Gamma: 2.20
DPMS: Active yes, Suspend yes, Standby yes
RGB Color Display
Chroma
RedX: 0.619 RedY: 0.340
GreenX: 0.279 GreenY: 0.600
BlueX: 0.140 BlueY: 0.090
WhiteX: 0.289 WhiteY: 0.300
First DETAILED Timing is preferred
Supported VESA Modes
720x400@70Hz
640x480@60Hz
640x480@67Hz
640x480@72Hz
640x480@75Hz
800x600@56Hz
800x600@60Hz
800x600@72Hz
800x600@75Hz
832x624@75Hz
1024x768@60Hz
1024x768@70Hz
1024x768@75Hz
1280x1024@75Hz
1152x870@75Hz
Manufacturer's mask: 0
Standard Timings
1280x1024@60Hz
1024x819@85Hz
800x640@85Hz
640x512@85Hz
Detailed Timings
65 MHz 1024 1040 1104 1344 768 781 783 817 -HSync -VSync
162 MHz 1600 1664 1856 2160 1200 1201 1204 1250 +HSync +VSync
========================================
i2c_adapter i2c-1: master_xfer: with 2 msgs.
i2c_adapter i2c-1: master_xfer: with 2 msgs.
i2c_adapter i2c-1: master_xfer: with 2 msgs.
nvidiafb: CRTC 1 is currently programmed for DFP
nvidiafb: Using DFP on CRTC 1
Panel size is 1024 x 768
nvidiafb: MTRR set to ON
Console: switching to colour frame buffer device 128x48
nvidiafb: PCI nVidia NV25 framebuffer (128MB @ 0xE0000000)
With DVI and video=nvidiafb:1600x1200-32@60 I get a kernel hang like this
(copied by hand and shortened in places)
Decompressing linux
Bootdata ok (command line is root=... video=nvidiafb:1600x1200-32@60)
Linux version 2.6.10-rc2 ...
BIOS-provided physical map
Scanning NUMA topology in Northbridge 24
Number of nodes 2 (10010)
Node 0 using interleaving mode 1/0
No NUMA configuration found
and thats as far as it gets.
Getting closer by the hour :)
Andrew
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://productguide.itmanagersjournal.com/
next prev parent reply other threads:[~2004-11-23 18:01 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-11-19 11:37 Rivafb won't work with DVI connector Andrew Walrond
2004-11-19 22:08 ` Antonino A. Daplas
2004-11-20 15:52 ` Andrew Walrond
2004-11-22 0:11 ` Antonino A. Daplas
2004-11-22 9:23 ` Andrew Walrond
2004-11-22 9:43 ` Andrew Walrond
2004-11-22 22:13 ` Antonino A. Daplas
2004-11-22 23:47 ` Andrew Walrond
2004-11-22 23:54 ` Andrew Walrond
2004-11-23 1:50 ` Antonino A. Daplas
2004-11-23 12:32 ` Andrew Walrond
2004-11-23 14:28 ` Antonino A. Daplas
2004-11-23 15:09 ` Andrew Walrond
2004-11-23 15:18 ` Antonino A. Daplas
2004-11-23 16:08 ` Andrew Walrond
2004-11-23 17:07 ` Antonino A. Daplas
2004-11-23 18:01 ` Andrew Walrond [this message]
2004-11-23 18:26 ` Antonino A. Daplas
2004-11-23 19:00 ` Andrew Walrond
2004-11-23 19:07 ` Andrew Walrond
2004-11-23 19:23 ` Andrew Walrond
2004-11-23 19:59 ` Geert Uytterhoeven
2004-11-23 20:53 ` Andrew Walrond
2004-11-23 22:44 ` Antonino A. Daplas
2004-11-23 23:59 ` Andrew Walrond
2004-11-24 22:38 ` Andrew Walrond
2004-11-23 20:21 ` Chad Daelhousen
2004-11-24 23:01 ` Andrew Walrond
-- strict thread matches above, loose matches on Subject: below --
2004-11-25 0:07 Antonino A. Daplas
2004-11-25 15:27 ` Andrew Walrond
2004-11-25 21:16 ` Antonino A. Daplas
2004-11-26 14:09 ` Antonino A. Daplas
2004-11-27 12:40 ` Andrew Walrond
2004-11-27 18:29 ` Michel Dänzer
2004-11-27 22:35 ` Andrew Walrond
2004-11-27 22:43 ` Antonino A. Daplas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200411231801.14328.andrew@walrond.org \
--to=andrew@walrond.org \
--cc=adaplas@hotpop.com \
--cc=linux-fbdev-devel@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).