From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tony Daplas Subject: Fwd: linux-kernel radeonfb: Display corruption with power managment, after a while it goes away automatically Date: Thu, 17 Mar 2005 15:45:40 -0800 (PST) Message-ID: <20050317234540.12743.qmail@web53307.mail.yahoo.com> Reply-To: linux-fbdev-devel@lists.sourceforge.net Mime-Version: 1.0 Received: from sc8-sf-mx1-b.sourceforge.net ([10.3.1.11] helo=sc8-sf-mx1.sourceforge.net) by sc8-sf-list1.sourceforge.net with esmtp (Exim 4.30) id 1DC4gZ-0004P0-CB for linux-fbdev-devel@lists.sourceforge.net; Thu, 17 Mar 2005 15:45:51 -0800 Received: from web53307.mail.yahoo.com ([206.190.39.236]) by sc8-sf-mx1.sourceforge.net with smtp (Exim 4.41) id 1DC4gW-00050q-KH for linux-fbdev-devel@lists.sourceforge.net; Thu, 17 Mar 2005 15:45:51 -0800 Sender: linux-fbdev-devel-admin@lists.sourceforge.net Errors-To: linux-fbdev-devel-admin@lists.sourceforge.net List-Unsubscribe: , List-Id: List-Post: List-Help: List-Subscribe: , List-Archive: Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: benh@kernel.crashing.org Cc: adaplas@pol.net, linux-fbdev-devel@lists.sourceforge.net, sebastian_ml@gmx.net --- Sebastian wrote: > Date: Thu, 17 Mar 2005 23:07:14 +0100 > From: Sebastian > To: adaplas@hotpop.com > Subject: linux-kernel radeonfb: Display corruption > with power managment, after > a while it goes away automatically > > Hello! > > I have a desktop computer with a radeon 9250 agp > card from connect3d. I > append radeonfb.default_dynclk=1 when loading the > kernel or use options > radeonfb default.dynclk=1 when using modules. I > understand the power > managment feature is mostly for mobility cards for > laptops, but I like > it very much because my card stays much cooler with > it. > The problem is that, no matter if I load the module > or build it > statically in the kernel the screen gets garbled > until init says it's > "Setting user font". > > After setting the user fonts (exactly at this point > everytime) > everything at once is in order. And powermanagment > works flawlessly. > I don't get the point why this should have anything > to do with setting > user fonts (which are set to lat0-16 btw.). > > I'm on Gentoo kernel 2.6.11. I can't tell how this > works with earlier > versions, because the card is only a few days old. > But if you like I > could check it out. > > cat /proc/version > Linux version 2.6.11.2 (root@hal9000) (gcc version > 3.3.5 (Gentoo Linux > 3.3.5-r1, ssp-3.3.2-3, pie-8.7.7.1)) #3 Thu Mar 17 > 21:38:23 CET 2005 > > /usr/src/linux/scripts/ver_linux > If some fields are empty or look unusual you may > have an old version. > Compare to the current minimal requirements in > Documentation/Changes. > > Linux hal9000 2.6.11.2 #3 Thu Mar 17 21:38:23 CET > 2005 i686 AMD > Athlon(tm) XP 1700+ AuthenticAMD GNU/Linux > > Gnu C 3.3.5 > Gnu make 3.80 > binutils 2.15.92.0.2 > util-linux 2.12i > mount 2.12i > module-init-tools 3.0 > e2fsprogs 1.35 > reiserfsprogs line > reiser4progs line > xfsprogs 2.6.25 > Linux C Library 2.3.4 > Dynamic linker (ldd) 2.3.4 > Procps 3.2.4 > Net-tools 1.60 > Kbd 1.12 > Sh-utils 5.2.1 > udev 045 > Modules Loaded dvb_ttpci dvb_core saa7146_vv > video_buf saa7146 > ves1820 stv0299 tda8083 stv0297 sp8870 ves1x93 > ttpci_eeprom radeonfb > cfbcopyarea cfbimgblt cfbfillrect lirc_serial > lirc_dev > > cat /proc/cpuinfo > processor : 0 > vendor_id : AuthenticAMD > cpu family : 6 > model : 8 > model name : AMD Athlon(tm) XP 1700+ > stepping : 1 > cpu MHz : 1469.873 > cache size : 256 KB > fdiv_bug : no > hlt_bug : no > f00f_bug : no > coma_bug : no > fpu : yes > fpu_exception : yes > cpuid level : 1 > wp : yes > flags : fpu vme de pse tsc msr pae mce cx8 > apic sep mtrr pge > mca cmov pat pse36 mmx fxsr sse pni syscall mmxext > 3dnowext 3dnow > bogomips : 2899.96 > > cat /proc/modules > dvb_ttpci 90856 18 - Live 0xe1981000 > dvb_core 75816 1 dvb_ttpci, Live 0xe094f000 > saa7146_vv 45376 1 dvb_ttpci, Live 0xe092b000 > video_buf 17092 1 saa7146_vv, Live 0xe0910000 > saa7146 15204 2 dvb_ttpci,saa7146_vv, Live > 0xe0916000 > ves1820 5508 1 dvb_ttpci, Live 0xe090d000 > stv0299 9668 1 dvb_ttpci, Live 0xe08e5000 > tda8083 5700 1 dvb_ttpci, Live 0xe08ed000 > stv0297 8576 1 dvb_ttpci, Live 0xe08e9000 > sp8870 7180 1 dvb_ttpci, Live 0xe08dd000 > ves1x93 6340 1 dvb_ttpci, Live 0xe0816000 > ttpci_eeprom 2304 1 dvb_ttpci, Live 0xe083d000 > radeonfb 61252 1 - Live 0xe08f1000 > cfbcopyarea 3712 1 radeonfb, Live 0xe083b000 > cfbimgblt 2752 1 radeonfb, Live 0xe0839000 > cfbfillrect 3392 1 radeonfb, Live 0xe081d000 > lirc_serial 11488 1 - Live 0xe0835000 > lirc_dev 11532 1 lirc_serial, Live 0xe0831000 > > cat /proc/ioports > 0000-001f : dma1 > 0020-0021 : pic1 > 0040-0043 : timer0 > 0050-0053 : timer1 > 0060-006f : keyboard > 0070-0077 : rtc > 0080-008f : dma page reg > 00a0-00a1 : pic2 > 00c0-00df : dma2 > 00f0-00ff : fpu > 0170-0177 : ide1 > 01f0-01f7 : ide0 > 0376-0376 : ide1 > 03c0-03df : vga+ > 03f6-03f6 : ide0 > 03f8-03ff : lirc_serial > 0cf8-0cff : PCI conf1 > 4000-407f : motherboard > 4000-4003 : PM1a_EVT_BLK > 4004-4005 : PM1a_CNT_BLK > 4008-400b : PM_TMR > 4020-4027 : GPE0_BLK > 4080-40ff : motherboard > 4200-427f : motherboard > 4280-42ff : motherboard > 4400-447f : motherboard > 4480-44ff : motherboard > 44a0-44af : GPE1_BLK > 5000-503f : motherboard > 5100-513f : motherboard > d000-dfff : PCI Bus #02 > d000-d0ff : 0000:02:00.0 > d000-d0ff : radeonfb > e000-e007 : 0000:00:04.0 > e000-e007 : forcedeth > ec00-ec1f : 0000:00:01.1 > f000-f00f : 0000:00:09.0 > f000-f007 : ide0 > f008-f00f : ide1 > > cat /proc/iomem > 00000000-0009ffff : System RAM > 000a0000-000bffff : Video RAM area > 000c0000-000ccfff : Video ROM > 000d0000-000d17ff : Adapter ROM > 000f0000-000fffff : System ROM > 00100000-1ffeffff : System RAM > 00100000-0033a4e9 : Kernel code > 0033a4ea-004102ff : Kernel data > 1fff0000-1fff2fff : ACPI Non-volatile Storage > 1fff3000-1fffffff : ACPI Tables > d0000000-dfffffff : PCI Bus #02 > d0000000-dfffffff : 0000:02:00.0 > d0000000-dfffffff : radeonfb > e0000000-e1ffffff : 0000:00:00.0 > e2000000-e3ffffff : PCI Bus #02 > e3000000-e300ffff : 0000:02:00.0 > e3000000-e300ffff : radeonfb > e4000000-e4ffffff : PCI Bus #01 > e4000000-e40001ff : 0000:01:09.0 > e4000000-e40001ff : saa7146 > e5000000-e5000fff : 0000:00:04.0 > e5000000-e5000fff : forcedeth > e5002000-e5002fff : 0000:00:02.0 > e5002000-e5002fff : ohci_hcd > e5003000-e5003fff : 0000:00:02.1 > e5003000-e5003fff : ohci_hcd > e5004000-e50040ff : 0000:00:02.2 > e5004000-e50040ff : ehci_hcd > fec00000-fec00fff : reserved > fee00000-fee00fff : reserved > ffff0000-ffffffff : reserved > > cat /proc/fb > 0 ATI Radeon Y` > > dmesg: > dmesg > Linux version 2.6.11.2 (root@hal9000) (gcc version > 3.3.5 (Gentoo Linux > 3.3.5-r1, ssp-3.3.2-3, pie-8.7.7.1)) #3 Thu Mar 17 > 21:38:23 CET 2005 > BIOS-provided physical RAM map: > BIOS-e820: 0000000000000000 - 00000000000a0000 > (usable) > BIOS-e820: 00000000000f0000 - 0000000000100000 > (reserved) > BIOS-e820: 0000000000100000 - 000000001fff0000 > (usable) > BIOS-e820: 000000001fff0000 - 000000001fff3000 > (ACPI NVS) > BIOS-e820: 000000001fff3000 - 0000000020000000 > (ACPI data) > BIOS-e820: 00000000fec00000 - 00000000fec01000 > (reserved) > BIOS-e820: 00000000fee00000 - 00000000fee01000 > (reserved) > BIOS-e820: 00000000ffff0000 - 0000000100000000 > (reserved) > 511MB LOWMEM available. > On node 0 totalpages: 131056 > DMA zone: 4096 pages, LIFO batch:1 > Normal zone: 126960 pages, LIFO batch:16 > HighMem zone: 0 pages, LIFO batch:1 > DMI 2.2 present. > ACPI: RSDP (v000 Nvidia > ) @ 0x000f6fa0 > ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD > 0x00000000) @ 0x1fff3000 > ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD > 0x00000000) @ 0x1fff3040 > ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD > 0x00000000) @ 0x1fff7880 > ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT > 0x0100000e) @ 0x00000000 > ACPI: Local APIC address 0xfee00000 > ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) > Processor #0 6:8 APIC version 16 > ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) > ACPI: IOAPIC (id[0x02] address[0xfec00000] > gsi_base[0]) > IOAPIC[0]: apic_id 2, version 17, address > 0xfec00000, GSI 0-23 > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl > dfl) > ACPI: BIOS IRQ0 pin2 override ignored. > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high > level) > ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 > high edge) > ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 > high edge) > ACPI: IRQ9 used by override. > ACPI: IRQ14 used by override. > ACPI: IRQ15 used by override. > Enabling APIC mode: Flat. Using 1 I/O APICs > Using ACPI (MADT) for SMP configuration information > Allocating PCI resources starting at 20000000 (gap: > 20000000:dec00000) > Built 1 zonelists > Kernel command line: auto BOOT_IMAGE=gentoo ro > root=303 > radeonfb.default_dynclk=1 elevator=deadline > Unknown boot option `radeonfb.default_dynclk=1': > ignoring > mapped APIC to ffffd000 (fee00000) > mapped IOAPIC to ffffc000 (fec00000) > Initializing CPU#0 > PID hash table entries: 2048 (order: 11, 32768 > bytes) > Detected 1469.873 MHz processor. > Using tsc for high-res timesource > Console: colour VGA+ 80x25 > Dentry cache hash table entries: 131072 (order: 7, > 524288 bytes) > Inode-cache hash table entries: 65536 (order: 6, > 262144 bytes) > Memory: 515168k/524224k available (2281k kernel > code, 8504k reserved, > 855k data, 156k init, 0k highmem) > Checking if this processor honours the WP bit even > in supervisor mode... Ok. > Calibrating delay loop... 2899.96 BogoMIPS > (lpj=1449984) > Mount-cache hash table entries: 512 (order: 0, 4096 > bytes) > CPU: After generic identify, caps: 0383fbff c1c3fbff > 00000000 00000000 > 00000000 00000000 00000000 > CPU: After vendor identify, caps: 0383fbff c1c3fbff > 00000000 00000000 > 00000000 00000000 00000000 > CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K > (64 bytes/line) > CPU: L2 Cache: 256K (64 bytes/line) > CPU: After all inits, caps: 0383fbff c1c3fbff > 00000000 00000020 00000000 > 00000000 00000000 > Intel machine check architecture supported. > Intel machine check reporting enabled on CPU#0. > CPU: AMD Athlon(tm) XP 1700+ stepping 01 > Enabling fast FPU save and restore... done. > Enabling unmasked SIMD FPU exception support... > done. > Checking 'hlt' instruction... OK. > ENABLING IO-APIC IRQs > ..TIMER: vector=0x31 pin1=0 pin2=-1 > NET: Registered protocol family 16 > PCI: PCI BIOS revision 2.10 entry at 0xfb590, last > bus=2 > PCI: Using configuration type 1 > mtrr: v2.0 (20020519) > ACPI: Subsystem revision 20050211 > ACPI: Interpreter enabled > ACPI: Using IOAPIC for interrupt routing > ACPI: PCI Root Bridge [PCI0] (00:00) > PCI: Probing PCI hardware (bus 00) > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > ACPI: PCI Interrupt Routing Table > [\_SB_.PCI0.HUB0._PRT] > ACPI: PCI Interrupt Routing Table > [\_SB_.PCI0.AGPB._PRT] > ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 > 11 12 14 15) *0, > disabled. > ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 10 > 11 *12 14 15) > ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 > 11 12 14 15) *0, > disabled. > ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 *10 > 11 12 14 15) > ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 > 11 12 14 15) *0, > disabled. > ACPI: PCI Interrupt Link [LUBA] (IRQs *3 4 5 6 7 10 > 11 12 14 15) > ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 *7 10 > 11 12 14 15) > ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 10 > *11 12 14 15) > ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 > 11 12 14 15) *0, > disabled. > ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 10 > 11 12 14 15) *0, > disabled. > ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 > 11 12 14 15) *0, > disabled. > ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 10 > *11 12 14 15) > ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 *5 6 7 10 > 11 12 14 15) > ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 10 > 11 12 14 15) *0, > disabled. > ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 > 11 12 14 15) *0, > disabled. > ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 > 11 12 14 15) *0, > disabled. > ACPI: PCI Interrupt Link [APC1] (IRQs *16), > disabled. > ACPI: PCI Interrupt Link [APC2] (IRQs *17), > disabled. > ACPI: PCI Interrupt Link [APC3] (IRQs *18), > disabled. > ACPI: PCI Interrupt Link [APC4] (IRQs *19), > disabled. > ACPI: PCI Interrupt Link [APC5] (IRQs *16), > disabled. > ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0, > disabled. > ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0, > disabled. > ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, > disabled. > ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, > disabled. > ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0, > disabled. > ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, > disabled. > ACPI: PCI Interrupt Link [APCS] (IRQs *23), > disabled. > ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0, > disabled. > ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, > disabled. > ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, > disabled. > ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, > disabled. > usbcore: registered new driver usbfs > usbcore: registered new driver hub > PCI: Using ACPI for IRQ routing > ** PCI interrupts are no longer routed > automatically. If this > ** causes a device to stop working, it is probably > because the > ** driver failed to call pci_enable_device(). As a > temporary > ** workaround, the "pci=routeirq" argument restores > the old > ** behavior. If this argument makes the device work > again, > ** please email the output of "lspci" to > bjorn.helgaas@hp.com > ** so I can fix the driver. > Machine check exception polling timer started. > SGI XFS with no debug enabled > ACPI: Power Button (FF) [PWRF] > ACPI: Sleep Button (CM) [SLPB] > ACPI: Fan [FAN] (on) > ACPI: Thermal Zone [THRM] (40 C) > Real Time Clock Driver v1.12 > Non-volatile memory driver v1.2 > Linux agpgart interface v0.100 (c) Dave Jones > agpgart: Detected NVIDIA nForce2 chipset > agpgart: Maximum main memory to use for agp memory: > 439M > agpgart: AGP aperture is 32M @ 0xe0000000 > [drm] Initialized drm 1.0.0 20040925 > ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 > ACPI: PCI interrupt 0000:02:00.0[A] -> GSI 19 > (level, high) -> IRQ 19 > [drm] Initialized radeon 1.14.0 20050125 on minor 0: > ATI Technologies > Inc RV280 [Radeon 9200 PRO] > serio: i8042 AUX port at 0x60,0x64 irq 12 > serio: i8042 KBD port at 0x60,0x64 irq 1 > io scheduler noop registered > io scheduler deadline registered (default) > forcedeth.c: Reverse Engineered nForce ethernet > driver. Version 0.31. > ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22 > ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 22 > (level, high) -> IRQ 22 > PCI: Setting latency timer of device 0000:00:04.0 to > 64 > eth0: forcedeth.c: subsystem: 01297:0531 bound to > 0000:00:04.0 > tun: Universal TUN/TAP device driver, 1.6 > tun: (C) 1999-2004 Max Krasnyansky > > Linux video capture interface: v1.00 > Uniform Multi-Platform E-IDE driver Revision: > 7.00alpha2 > ide: Assuming 33MHz system bus speed for PIO modes; > override with idebus=xx > NFORCE2: IDE controller at PCI slot 0000:00:09.0 > NFORCE2: chipset revision 162 > NFORCE2: not 100% native mode: will probe irqs later > NFORCE2: BIOS didn't set cable bits correctly. > Enabling workaround. > NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller > ide0: BM-DMA at 0xf000-0xf007, BIOS settings: > hda:DMA, hdb:DMA > ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: > hdc:DMA, hdd:DMA > Probing IDE interface ide0... > hda: SAMSUNG SV1604N, ATA DISK drive > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > Probing IDE interface ide1... > hdc: HL-DT-ST DVDRAM GSA-4082B, ATAPI CD/DVD-ROM > drive > ide1 at 0x170-0x177,0x376 on irq 15 > hda: max request size: 1024KiB > hda: 312581808 sectors (160041 MB) w/2048KiB Cache, > CHS=19457/255/63, > UDMA(100) > hda: cache flushes supported > hda: hda1 hda2 hda3 hda4 > hdc: ATAPI 32X DVD-ROM DVD-R-RAM CD-R/RW drive, > 2048kB Cache, UDMA(33) > Uniform CD-ROM driver Revision: 3.20 > ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21 > ACPI: PCI interrupt 0000:00:02.2[C] -> GSI 21 > (level, high) -> IRQ 21 > ehci_hcd 0000:00:02.2: nVidia Corporation nForce2 > USB Controller > PCI: Setting latency timer of device 0000:00:02.2 to > 64 > ehci_hcd 0000:00:02.2: irq 21, pci mem 0xe5004000 > ehci_hcd 0000:00:02.2: new USB bus registered, > assigned bus number 1 > PCI: cache line size of 64 is not supported by > device 0000:00:02.2 > ehci_hcd 0000:00:02.2: park 0 > ehci_hcd 0000:00:02.2: USB 2.0 initialized, EHCI > 1.00, driver 10 Dec 2004 > hub 1-0:1.0: USB hub found > hub 1-0:1.0: 6 ports detected > ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller > (OHCI) Driver (PCI) > ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20 > ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 20 > (level, high) -> IRQ 20 > ohci_hcd 0000:00:02.0: nVidia Corporation nForce2 > USB Controller > PCI: Setting latency timer of device 0000:00:02.0 to > 64 > ohci_hcd 0000:00:02.0: irq 20, pci mem 0xe5002000 > ohci_hcd 0000:00:02.0: new USB bus registered, > assigned bus number 2 > hub 2-0:1.0: USB hub found > hub 2-0:1.0: 3 ports detected > ACPI: PCI Interrupt Link [APCG] enabled at IRQ 22 > ACPI: PCI interrupt 0000:00:02.1[B] -> GSI 22 > (level, high) -> IRQ 22 > ohci_hcd 0000:00:02.1: nVidia Corporation nForce2 > USB Controller (#2) > PCI: Setting latency timer of device 0000:00:02.1 to > 64 > ohci_hcd 0000:00:02.1: irq 22, pci mem 0xe5003000 > ohci_hcd 0000:00:02.1: new USB bus registered, > assigned bus number 3 > hub 3-0:1.0: USB hub found > hub 3-0:1.0: 3 ports detected > usbcore: registered new driver usblp > drivers/usb/class/usblp.c: v0.13: USB Printer Device > Class driver > usb 2-1: new low speed USB device using ohci_hcd and > address 2 > usb 2-2: new full speed USB device using ohci_hcd > and address 3 > usb 2-3: new full speed USB device using ohci_hcd > and address 4 > drivers/usb/class/usblp.c: usblp0: USB Bidirectional > printer dev 4 if 0 > alt 0 proto 2 vid 0x03F0 pid 0x6104 > input: USB HID v1.10 Mouse [Logitech USB-PS/2 > Optical Mouse] on > usb-0000:00:02.0-1 > input: USB HID v1.00 Device [USB Audio] on > usb-0000:00:02.0-2 > usbcore: registered new driver usbhid > drivers/usb/input/hid-core.c: v2.0:USB HID core > driver > mice: PS/2 mouse device common for all mice > usb 3-2: new full speed USB device using ohci_hcd > and address 2 > usb 3-3: new low speed USB device using ohci_hcd and > address 3 > Advanced Linux Sound Architecture Driver Version > 1.0.8 (Thu Jan 13 > 09:39:32 2005 UTC). > input: USB HID v1.00 Keyboard [046a:0001] on > usb-0000:00:02.1-3 > usbcore: registered new driver snd-usb-audio > ALSA device list: > #0: USB Audio at usb-0000:00:02.0-2, full speed > NET: Registered protocol family 2 > IP: routing cache hash table of 4096 buckets, > 32Kbytes > TCP established hash table entries: 32768 (order: 6, > 262144 bytes) > TCP bind hash table entries: 32768 (order: 5, 131072 > bytes) > TCP: Hash tables configured (established 32768 bind > 32768) > ip_conntrack version 2.1 (4095 buckets, 32760 max) - > 172 bytes per conntrack > ip_tables: (C) 2000-2002 Netfilter core team > NET: Registered protocol family 1 > NET: Registered protocol family 17 > XFS mounting filesystem hda3 > Ending clean XFS mount for filesystem: hda3 > VFS: Mounted root (xfs filesystem) readonly. > Freeing unused kernel memory: 156k freed > Adding 996020k swap on /dev/hda2. Priority:-1 > extents:1 > lirc_dev: IR Remote Control driver registered, at > major 61 > lirc_serial: auto-detected active low receiver > lirc_dev: lirc_register_plugin:sample_rate: 0 > ACPI: PCI interrupt 0000:02:00.0[A] -> GSI 19 > (level, high) -> IRQ 19 > radeonfb: Found Intel x86 BIOS ROM Image > radeonfb: Retreived PLL infos from BIOS > radeonfb: Reference=27.00 MHz (RefDiv=12) > Memory=240.00 Mhz, > System=166.00 MHz > radeonfb: PLL min 20000 max 40000 > radeonfb: Monitor 1 type DFP found > radeonfb: EDID probed > radeonfb: Monitor 2 type no found > Console: switching to colour frame buffer device > 160x64 > radeonfb: Dynamic Clock Power Management enabled > radeonfb (0000:02:00.0): ATI Radeon Y` > XFS mounting filesystem hda1 > Ending clean XFS mount for filesystem: hda1 > XFS mounting filesystem hda4 > Ending clean XFS mount for filesystem: hda4 > saa7146: register extension 'dvb'. > ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 > ACPI: PCI interrupt 0000:01:09.0[A] -> GSI 17 > (level, high) -> IRQ 17 > saa7146: found saa7146 @ mem e091c000 (revision 1, > irq 17) (0x13c2,0x0000). > DVB: registering new adapter (Technotrend/Hauppauge > WinTV DVB-S rev1.X). > adapter has MAC addr = 00:d0:5c:03:2a:84 > dvb-ttpci: gpioirq unknown type=0 len=0 > dvb-ttpci: info @ card 0: firm f0240009, rtsl > b0250018, vid 71010068, > app 8000261d > dvb-ttpci: firmware @ card 0 supports CI link layer > interface > dvb-ttpci: Crystal audio DAC @ card 0 detected > saa7146_vv: saa7146 (0): registered device video0 > [v4l2] > DVB: registering frontend 0 (ST STV0299 DVB-S)... > dvb-ttpci: found av7110-0. > agpgart: Found an AGP 3.0 compliant device at > 0000:00:00.0. > agpgart: X passes broken AGP3 flags (1f00420f). > Fixed. > agpgart: Putting AGP V3 device at 0000:00:00.0 into > 8x mode > agpgart: Putting AGP V3 device at 0000:02:00.0 into > 8x mode > [drm] Loading R200 Microcode > agpgart: Found an AGP 3.0 compliant device at > 0000:00:00.0. > agpgart: X passes broken AGP3 flags (1f00420f). > Fixed. > agpgart: Putting AGP V3 device at 0000:00:00.0 into > 8x mode > agpgart: Putting AGP V3 device at 0000:02:00.0 into > 8x mode > [drm] Loading R200 Microcode > agpgart: Found an AGP 3.0 compliant device at > 0000:00:00.0. > agpgart: X passes broken AGP3 flags (1f00420f). > Fixed. > agpgart: Putting AGP V3 device at 0000:00:00.0 into > 8x mode > agpgart: Putting AGP V3 device at 0000:02:00.0 into > 8x mode > [drm] Loading R200 Microcode > > lspci -vvv > 0000:00:00.0 Host bridge: nVidia Corporation nForce2 > AGP (different > version?) (rev c1) > Control: I/O- Mem+ BusMaster+ SpecCycle- > MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- > DEVSEL=fast >TAbort- > SERR- Latency: 0 > Region 0: Memory at e0000000 (32-bit, > prefetchable) > Capabilities: [40] AGP version 3.0 > Status: RQ=32 Iso- ArqSz=2 Cal=0 > SBA+ ITACoh- GART64- > HTrans- 64bit- FW- AGP3+ Rate=x4,x8 > Command: RQ=1 ArqSz=0 Cal=0 SBA+ > AGP+ GART64- 64bit- > FW- Rate=x8 Capabilities: [60] #08 [2001] > > 0000:00:00.1 RAM memory: nVidia Corporation nForce2 > Memory Controller 1 > (rev c1) Subsystem: Holco Enterprise Co, > Ltd/Shuttle Computer: > Unknown device 0531 > Control: I/O- Mem- BusMaster- SpecCycle- > MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- > DEVSEL=fast >TAbort- > SERR- > 0000:00:00.2 RAM memory: nVidia Corporation nForce2 > Memory Controller 4 > (rev c1) Subsystem: Holco Enterprise Co, > Ltd/Shuttle Computer: > Unknown device 0531 > Control: I/O- Mem- BusMaster- SpecCycle- > MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- > DEVSEL=fast >TAbort- > SERR- > 0000:00:00.3 RAM memory: nVidia Corporation nForce2 > Memory Controller 3 > (rev c1) Subsystem: Holco Enterprise Co, > Ltd/Shuttle Computer: > Unknown device 0531 > Control: I/O- Mem- BusMaster- SpecCycle- > MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- > DEVSEL=fast >TAbort- > SERR- > 0000:00:00.4 RAM memory: nVidia Corporation nForce2 > Memory Controller 2 > (rev c1) Subsystem: Holco Enterprise Co, > Ltd/Shuttle Computer: > Unknown device 0531 > Control: I/O- Mem- BusMaster- SpecCycle- > MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- > DEVSEL=fast >TAbort- > SERR- > 0000:00:00.5 RAM memory: nVidia Corporation nForce2 > Memory Controller 5 > (rev c1) Subsystem: Holco Enterprise Co, > Ltd/Shuttle Computer: > Unknown device 0531 > Control: I/O- Mem- BusMaster- SpecCycle- > MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- > DEVSEL=fast >TAbort- > SERR- > 0000:00:01.0 ISA bridge: nVidia Corporation nForce2 > ISA Bridge (rev a4) > Subsystem: Holco Enterprise Co, Ltd/Shuttle > Computer: Unknown > device 0531 > Control: I/O+ Mem+ BusMaster+ SpecCycle+ > MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- > DEVSEL=fast >TAbort- > SERR- Latency: 0 > Capabilities: [48] #08 [01e1] > > 0000:00:01.1 SMBus: nVidia Corporation nForce2 SMBus > (MCP) (rev a2) > Subsystem: Holco Enterprise Co, Ltd/Shuttle > Computer: Unknown > device 0531 > Control: I/O+ Mem- BusMaster- SpecCycle- > MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- > DEVSEL=fast >TAbort- > SERR- Interrupt: pin A routed to IRQ 11 > Region 0: I/O ports at ec00 > Capabilities: [44] Power Management version > 2 > Flags: PMEClk- DSI- D1- D2- > AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 > DScale=0 PME- > > 0000:00:02.0 USB Controller: nVidia Corporation > nForce2 USB Controller > (rev a4) (prog-if 10 [OHCI]) > Subsystem: Holco Enterprise Co, Ltd/Shuttle > Computer: Unknown > device 0531 > Control: I/O+ Mem+ BusMaster+ SpecCycle- > MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- > DEVSEL=fast >TAbort- > SERR- Latency: 0 (750ns min, 250ns max) > Interrupt: pin A routed to IRQ 20 > Region 0: Memory at e5002000 (32-bit, > non-prefetchable) > Capabilities: [44] Power Management version > 2 > Flags: PMEClk- DSI- D1+ D2+ > AuxCurrent=0mA > PME(D0+,D1+,D2+,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 > DScale=0 PME- > > 0000:00:02.1 USB Controller: nVidia Corporation > nForce2 USB Controller > (rev a4) (prog-if 10 [OHCI]) > Subsystem: Holco Enterprise Co, Ltd/Shuttle > Computer: Unknown > device 0531 > Control: I/O+ Mem+ BusMaster+ SpecCycle- > MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- > DEVSEL=fast >TAbort- > SERR- Latency: 0 (750ns min, 250ns max) > Interrupt: pin B routed to IRQ 22 > Region 0: Memory at e5003000 (32-bit, > non-prefetchable) > Capabilities: [44] Power Management version > 2 > Flags: PMEClk- DSI- D1+ D2+ > AuxCurrent=0mA > PME(D0+,D1+,D2+,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 > DScale=0 PME- > > 0000:00:02.2 USB Controller: nVidia Corporation > nForce2 USB Controller > (rev a4) (prog-if 20 [EHCI]) > Subsystem: Holco Enterprise Co, Ltd/Shuttle > Computer: Unknown > device 0531 > Control: I/O- Mem+ BusMaster+ SpecCycle- > MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- > DEVSEL=fast >TAbort- > SERR- Latency: 0 (750ns min, 250ns max) > Interrupt: pin C routed to IRQ 21 > Region 0: Memory at e5004000 (32-bit, > non-prefetchable) > Capabilities: [44] #0a [2080] > Capabilities: [80] Power Management version > 2 > Flags: PMEClk- DSI- D1+ D2+ > AuxCurrent=0mA > PME(D0+,D1+,D2+,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 > DScale=0 PME- > > 0000:00:04.0 Ethernet controller: nVidia Corporation > nForce2 Ethernet > Controller (rev a1) > Subsystem: Holco Enterprise Co, Ltd/Shuttle > Computer: Unknown > device 0531 > Control: I/O+ Mem+ BusMaster+ SpecCycle- > MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- > DEVSEL=fast >TAbort- > SERR- Latency: 0 (250ns min, 5000ns max) > Interrupt: pin A routed to IRQ 22 > Region 0: Memory at e5000000 (32-bit, > non-prefetchable) > Region 1: I/O ports at e000 [size=8] > Capabilities: [44] Power Management version > 2 > Flags: PMEClk- DSI- D1+ D2+ > AuxCurrent=0mA > PME(D0+,D1+,D2+,D3hot+,D3cold+) > Status: D0 PME-Enable+ DSel=0 > DScale=0 PME- > > 0000:00:08.0 PCI bridge: nVidia Corporation nForce2 > External PCI Bridge > (rev a3) (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- > MemWINV- VGASnoop- > ParErr- Stepping- SERR+ FastB2B- > Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- > DEVSEL=fast >TAbort- > SERR- Latency: 0 > Bus: primary=00, secondary=01, > subordinate=01, sec-latency=32 > I/O behind bridge: 0000f000-00000fff > Memory behind bridge: e4000000-e4ffffff > Prefetchable memory behind bridge: > fff00000-000fffff > BridgeCtl: Parity- SERR+ NoISA- VGA- > MAbort- >Reset- FastB2B- > > 0000:00:09.0 IDE interface: nVidia Corporation > nForce2 IDE (rev a2) > (prog-if 8a [Master SecP PriP]) > Subsystem: Holco Enterprise Co, Ltd/Shuttle > Computer: Unknown > device 0531 > Control: I/O+ Mem- BusMaster+ SpecCycle- > MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- > DEVSEL=fast >TAbort- > SERR- Latency: 0 (750ns min, 250ns max) > Region 4: I/O ports at f000 [size=16] > Capabilities: [44] Power Management version > 2 > Flags: PMEClk- DSI- D1- D2- > AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 > DScale=0 PME- > > 0000:00:1e.0 PCI bridge: nVidia Corporation nForce2 > AGP (rev c1) > (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- > MemWINV- VGASnoop- > ParErr- Stepping- SERR+ FastB2B- > Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- > DEVSEL=medium > >TAbort- SERR- Latency: 32 > Bus: primary=00, secondary=02, > subordinate=02, sec-latency=32 > I/O behind bridge: 0000d000-0000dfff > Memory behind bridge: e2000000-e3ffffff > Prefetchable memory behind bridge: > d0000000-dfffffff > Expansion ROM at 0000d000 [disabled] > [size=4K] > BridgeCtl: Parity- SERR+ NoISA- VGA+ > MAbort- >Reset- FastB2B- > > 0000:01:09.0 Multimedia controller: Philips > Semiconductors SAA7146 (rev 01) > Subsystem: Technotrend Systemtechnik GmbH > Siemens/Technotrend/Hauppauge DVB card rev1.3 or > rev1.5 > Control: I/O- Mem+ BusMaster+ SpecCycle- > MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- > DEVSEL=medium > >TAbort- SERR- Latency: 32 (3750ns min, 9500ns max) > Interrupt: pin A routed to IRQ 17 > Region 0: Memory at e4000000 (32-bit, > non-prefetchable) > > 0000:02:00.0 VGA compatible controller: ATI > Technologies Inc RV280 > [Radeon 9200 PRO] (rev 01) (prog-if 00 [VGA]) > Subsystem: Connect Components Ltd: Unknown > device 2801 > Control: I/O+ Mem+ BusMaster+ SpecCycle- > MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- > DEVSEL=medium > >TAbort- SERR- Latency: 32 (2000ns min), cache line size > 08 > Interrupt: pin A routed to IRQ 19 > Region 0: Memory at d0000000 (32-bit, > prefetchable) > Region 1: I/O ports at d000 [size=256] > Region 2: Memory at e3000000 (32-bit, > non-prefetchable) [size=64K] > Capabilities: [58] AGP version 3.0 > Status: RQ=256 Iso- ArqSz=0 Cal=0 > SBA+ ITACoh- GART64- > HTrans- 64bit- FW+ AGP3+ Rate=x4,x8 > Command: RQ=32 ArqSz=2 Cal=0 SBA+ > AGP+ GART64- 64bit- > FW- Rate=x8 > Capabilities: [50] Power Management version > 2 > Flags: PMEClk- DSI- D1+ D2+ > AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 > DScale=0 PME- > > Thank you very much! > > Sebastian > > > __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click