From: Adrian Bunk <bunk@stusta.de>
To: adaplas@pol.net
Cc: linux-fbdev-devel@lists.sourceforge.net, linux-kernel@vger.kernel.org
Subject: [-mm patch] kill include/video/edid.h
Date: Sun, 20 Mar 2005 20:29:15 +0100 [thread overview]
Message-ID: <20050320192915.GR4449@stusta.de> (raw)
This patch removes some completely unused code.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
---
arch/i386/boot/compressed/misc.c | 1 -
arch/i386/kernel/setup.c | 4 ----
arch/x86_64/kernel/setup.c | 3 ---
drivers/video/fbmon.c | 1 -
drivers/video/vesafb.c | 3 ---
include/asm-i386/setup.h | 1 -
include/asm-x86_64/bootsetup.h | 1 -
include/video/edid.h | 27 ---------------------------
8 files changed, 41 deletions(-)
--- linux-2.6.11-mm4-full/arch/i386/kernel/setup.c.old 2005-03-20 20:06:06.000000000 +0100
+++ linux-2.6.11-mm4-full/arch/i386/kernel/setup.c 2005-03-20 20:06:45.000000000 +0100
@@ -43,8 +43,6 @@
#include <linux/nodemask.h>
#include <linux/kexec.h>
-#include <video/edid.h>
-
#include <asm/apic.h>
#include <asm/e820.h>
#include <asm/mpspec.h>
@@ -118,7 +116,6 @@
unsigned short length;
unsigned char table[0];
};
-struct edid_info edid_info;
struct ist_info ist_info;
struct e820map e820;
@@ -1468,7 +1465,6 @@
ROOT_DEV = old_decode_dev(ORIG_ROOT_DEV);
drive_info = DRIVE_INFO;
screen_info = SCREEN_INFO;
- edid_info = EDID_INFO;
apm_info.bios = APM_BIOS_INFO;
ist_info = IST_INFO;
saved_videomode = VIDEO_MODE;
--- linux-2.6.11-mm4-full/arch/x86_64/kernel/setup.c.old 2005-03-20 20:04:42.000000000 +0100
+++ linux-2.6.11-mm4-full/arch/x86_64/kernel/setup.c 2005-03-20 20:07:11.000000000 +0100
@@ -48,7 +48,6 @@
#include <asm/smp.h>
#include <asm/msr.h>
#include <asm/desc.h>
-#include <video/edid.h>
#include <asm/e820.h>
#include <asm/dma.h>
#include <asm/mpspec.h>
@@ -100,7 +99,6 @@
unsigned char table[0];
};
-struct edid_info edid_info;
struct e820map e820;
extern int root_mountflags;
@@ -523,7 +521,6 @@
ROOT_DEV = old_decode_dev(ORIG_ROOT_DEV);
drive_info = DRIVE_INFO;
screen_info = SCREEN_INFO;
- edid_info = EDID_INFO;
saved_video_mode = SAVED_VIDEO_MODE;
bootloader_type = LOADER_TYPE;
--- linux-2.6.11-mm4-full/drivers/video/fbmon.c.old 2005-03-20 20:03:56.000000000 +0100
+++ linux-2.6.11-mm4-full/drivers/video/fbmon.c 2005-03-20 20:04:27.000000000 +0100
@@ -34,7 +34,6 @@
#include <asm/prom.h>
#include <asm/pci-bridge.h>
#endif
-#include <video/edid.h>
#include "edid.h"
/*
--- linux-2.6.11-mm4-full/drivers/video/vesafb.c.old 2005-03-20 20:04:12.000000000 +0100
+++ linux-2.6.11-mm4-full/drivers/video/vesafb.c 2005-03-20 20:04:18.000000000 +0100
@@ -19,9 +19,6 @@
#include <linux/fb.h>
#include <linux/ioport.h>
#include <linux/init.h>
-#ifdef __i386__
-#include <video/edid.h>
-#endif
#include <asm/io.h>
#include <asm/mtrr.h>
--- linux-2.6.11-mm4-full/arch/i386/boot/compressed/misc.c.old 2005-03-20 20:05:55.000000000 +0100
+++ linux-2.6.11-mm4-full/arch/i386/boot/compressed/misc.c 2005-03-20 20:05:58.000000000 +0100
@@ -12,7 +12,6 @@
#include <linux/linkage.h>
#include <linux/vmalloc.h>
#include <linux/tty.h>
-#include <video/edid.h>
#include <asm/io.h>
#include <asm/page.h>
--- linux-2.6.11-mm4-full/include/asm-x86_64/bootsetup.h.old 2005-03-20 20:07:33.000000000 +0100
+++ linux-2.6.11-mm4-full/include/asm-x86_64/bootsetup.h 2005-03-20 20:07:44.000000000 +0100
@@ -25,7 +25,6 @@
#define KERNEL_START (*(unsigned int *) (PARAM+0x214))
#define INITRD_START (*(unsigned int *) (PARAM+0x218))
#define INITRD_SIZE (*(unsigned int *) (PARAM+0x21c))
-#define EDID_INFO (*(struct edid_info *) (PARAM+0x140))
#define EDD_NR (*(unsigned char *) (PARAM+EDDNR))
#define EDD_MBR_SIG_NR (*(unsigned char *) (PARAM+EDD_MBR_SIG_NR_BUF))
#define EDD_MBR_SIGNATURE ((unsigned int *) (PARAM+EDD_MBR_SIG_BUF))
--- linux-2.6.11-mm4-full/include/asm-i386/setup.h.old 2005-03-20 20:07:52.000000000 +0100
+++ linux-2.6.11-mm4-full/include/asm-i386/setup.h 2005-03-20 20:07:55.000000000 +0100
@@ -55,7 +55,6 @@
#define KERNEL_START (*(unsigned long *) (PARAM+0x214))
#define INITRD_START (*(unsigned long *) (PARAM+0x218))
#define INITRD_SIZE (*(unsigned long *) (PARAM+0x21c))
-#define EDID_INFO (*(struct edid_info *) (PARAM+0x140))
#define EDD_NR (*(unsigned char *) (PARAM+EDDNR))
#define EDD_MBR_SIG_NR (*(unsigned char *) (PARAM+EDD_MBR_SIG_NR_BUF))
#define EDD_MBR_SIGNATURE ((unsigned int *) (PARAM+EDD_MBR_SIG_BUF))
--- linux-2.6.11-mm4-full/include/video/edid.h 2005-03-02 08:37:50.000000000 +0100
+++ /dev/null 2005-03-19 22:42:59.000000000 +0100
@@ -1,27 +0,0 @@
-#ifndef __linux_video_edid_h__
-#define __linux_video_edid_h__
-
-#ifdef __KERNEL__
-
-#include <linux/config.h>
-#ifdef CONFIG_PPC_OF
-#include <linux/pci.h>
-#endif
-
-#ifdef CONFIG_X86
-struct edid_info {
- unsigned char dummy[128];
-};
-
-extern struct edid_info edid_info;
-extern char *get_EDID_from_BIOS(void *);
-
-#endif /* CONFIG_X86 */
-
-#ifdef CONFIG_PPC_OF
-extern char *get_EDID_from_OF(struct pci_dev *pdev);
-#endif
-
-#endif /* __KERNEL__ */
-
-#endif /* __linux_video_edid_h__ */
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
next reply other threads:[~2005-03-20 19:29 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-03-20 19:29 Adrian Bunk [this message]
2005-03-20 20:53 ` [-mm patch] kill include/video/edid.h Antonino A. Daplas
2005-03-24 3:10 ` [2.6 patch] edid.h cleanups Adrian Bunk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20050320192915.GR4449@stusta.de \
--to=bunk@stusta.de \
--cc=adaplas@pol.net \
--cc=linux-fbdev-devel@lists.sourceforge.net \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).