From: Andrew Morton <akpm@osdl.org>
To: linux-fbdev-devel@lists.sourceforge.net
Cc: klug@blarg.org
Subject: Fw: [Bugme-new] [Bug 4468] New: Upgrade to 2.6.11.6 results in no longer being able to turn the lcd backlight off.
Date: Sun, 10 Apr 2005 17:28:43 -0700 [thread overview]
Message-ID: <20050410172843.6366ef8a.akpm@osdl.org> (raw)
Can you test 2.6.12-rc2 please?
Begin forwarded message:
Date: Sun, 10 Apr 2005 17:25:49 -0700
From: bugme-daemon@osdl.org
To: bugme-new@lists.osdl.org
Subject: [Bugme-new] [Bug 4468] New: Upgrade to 2.6.11.6 results in no longer being able to turn the lcd backlight off.
http://bugme.osdl.org/show_bug.cgi?id=4468
Summary: Upgrade to 2.6.11.6 results in no longer being able to
turn the lcd backlight off.
Kernel Version: 2.6.11.6
Status: NEW
Severity: normal
Owner: acpi_other@kernel-bugs.osdl.org
Submitter: klug@blarg.org
Distribution:
Gentoo 2005.0
Hardware Environment:
Toshiba Satellite 5005-S507
lspci -vvv
0000:00:00.0 Host bridge: Intel Corporation 82815 815 Chipset Host Bridge and
Memory Controller Hub (rev 04)
Subsystem: Toshiba America Info Systems: Unknown device 0001
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR-
Latency: 0
Region 0: Memory at f8000000 (32-bit, prefetchable)
Capabilities: [88] #09 [e104]
Capabilities: [a0] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3-
Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP+ GART64- 64bit- FW- Rate=x4
0000:00:01.0 PCI bridge: Intel Corporation 82815 815 Chipset AGP Bridge (rev 04)
(prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fd000000-fdffffff
Prefetchable memory behind bridge: eff00000-f7ffffff
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
0000:00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 05) (prog-if 00
[Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=02, subordinate=04, sec-latency=64
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fce00000-fcefffff
Prefetchable memory behind bridge: fff00000-000fffff
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
0000:00:1f.0 ISA bridge: Intel Corporation 82801BA ISA Bridge (LPC) (rev 05)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
0000:00:1f.1 IDE interface: Intel Corporation 82801BA IDE U100 (rev 05) (prog-if
80 [Master])
Subsystem: Toshiba America Info Systems: Unknown device 0001
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Region 4: I/O ports at cff0 [size=16]
0000:00:1f.2 USB Controller: Intel Corporation 82801BA/BAM USB (Hub #1) (rev 05)
(prog-if 00 [UHCI])
Subsystem: Toshiba America Info Systems: Unknown device 0001
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin D routed to IRQ 11
Region 4: I/O ports at cf80 [size=32]
0000:00:1f.4 USB Controller: Intel Corporation 82801BA/BAM USB (Hub #2) (rev 05)
(prog-if 00 [UHCI])
Subsystem: Toshiba America Info Systems: Unknown device 0001
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 10
Region 4: I/O ports at 1000 [size=32]
0000:00:1f.5 Multimedia audio controller: Intel Corporation 82801BA/BAM AC'97
Audio (rev 05)
Subsystem: Toshiba America Info Systems: Unknown device 0002
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 10
Region 0: I/O ports at 1400
Region 1: I/O ports at 1040 [size=64]
0000:00:1f.6 Modem: Intel Corporation 82801BA/BAM AC'97 Modem (rev 05) (prog-if
00 [Generic])
Subsystem: Toshiba America Info Systems: Unknown device 0001
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 255
Region 0: I/O ports at 1800 [disabled]
Region 1: I/O ports at 1080 [disabled] [size=128]
0000:01:00.0 VGA compatible controller: nVidia Corporation NV17 [GeForce4 440
Go] (rev a3) (prog-if 00 [VGA])
Subsystem: Toshiba America Info Systems: Unknown device 0001
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 5
Region 0: Memory at fd000000 (32-bit, non-prefetchable)
Region 1: Memory at f0000000 (32-bit, prefetchable) [size=128M]
Region 2: Memory at eff80000 (32-bit, prefetchable) [size=512K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [44] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA- ITACoh- GART64- HTrans- 64bit- FW+ AGP3-
Rate=x1,x2,x4
Command: RQ=32 ArqSz=0 Cal=0 SBA- AGP+ GART64- 64bit- FW- Rate=x4
0000:02:07.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000
Controller (PHY/Link) (prog-if 10 [OHCI])
Subsystem: Toshiba America Info Systems: Unknown device 0001
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 255
Region 0: Memory at 20000000 (32-bit, non-prefetchable) [disabled]
Region 1: Memory at 20004000 (32-bit, non-prefetchable) [disabled] [size=16K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=55mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D3 PME-Enable- DSel=0 DScale=0 PME-
0000:02:08.0 Ethernet controller: Intel Corporation 82801BA/BAM/CA/CAM Ethernet
Controller (rev 03)
Subsystem: Toshiba America Info Systems PRO/100 VE Network Connection
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64 (2000ns min, 14000ns max), cache line size 08
Interrupt: pin A routed to IRQ 10
Region 0: Memory at fceff000 (32-bit, non-prefetchable)
Region 1: I/O ports at df40 [size=64]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
0000:02:0b.0 CardBus bridge: Toshiba America Info Systems ToPIC100 PCI to
Cardbus Bridge with ZV Support (rev 32)
Subsystem: Toshiba America Info Systems: Unknown device 0001
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 255
Region 0: Memory at 20001000 (32-bit, non-prefetchable) [disabled]
Bus: primary=02, secondary=03, subordinate=06, sec-latency=0
Memory window 0: 00000000-00000000 [disabled]
Memory window 1: 00000000-00000000 [disabled]
I/O window 0: 00000000-00000003 [disabled]
I/O window 1: 00000000-00000003 [disabled]
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite-
16-bit legacy interface ports at 0001
0000:02:0b.1 CardBus bridge: Toshiba America Info Systems ToPIC100 PCI to
Cardbus Bridge with ZV Support (rev 32)
Subsystem: Toshiba America Info Systems: Unknown device 0001
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 255
Region 0: Memory at 20002000 (32-bit, non-prefetchable) [disabled]
Bus: primary=02, secondary=07, subordinate=0a, sec-latency=0
Memory window 0: 00000000-00000000 [disabled]
Memory window 1: 00000000-00000000 [disabled]
I/O window 0: 00000000-00000003 [disabled]
I/O window 1: 00000000-00000003 [disabled]
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite-
16-bit legacy interface ports at 0001
0000:02:0c.0 System peripheral: Toshiba America Info Systems TC6371AF SmartMedia
Controller (rev 03)
Subsystem: Toshiba America Info Systems: Unknown device 0001
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 255
Region 0: Memory at 20000800 (32-bit, non-prefetchable) [disabled]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D3 PME-Enable- DSel=0 DScale=0 PME-
0000:02:0d.0 System peripheral: Toshiba America Info Systems SD TypA Controller
(rev 03)
Subsystem: Toshiba America Info Systems: Unknown device 0001
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 255
Region 0: Memory at 20000a00 (32-bit, non-prefetchable) [disabled]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D3 PME-Enable- DSel=0 DScale=0 PME-
/proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 8
model name : Pentium III (Coppermine)
stepping : 10
cpu MHz : 1096.759
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 mmx
fxsr sse
bogomips : 2170.88
/proc/ioports
0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-006f : keyboard
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
0376-0376 : ide1
03c0-03df : vesafb
03f6-03f6 : ide0
0cf8-0cff : PCI conf1
1000-101f : 0000:00:1f.4
1000-101f : uhci_hcd
1040-107f : 0000:00:1f.5
1040-107f : Intel 82801BA-ICH2
1080-10ff : 0000:00:1f.6
1400-14ff : 0000:00:1f.5
1400-14ff : Intel 82801BA-ICH2
1800-18ff : 0000:00:1f.6
cf80-cf9f : 0000:00:1f.2
cf80-cf9f : uhci_hcd
cff0-cfff : 0000:00:1f.1
cff0-cff7 : ide0
cff8-cfff : ide1
df40-df7f : 0000:02:08.0
df40-df7f : eepro100
e000-e07f : motherboard
e080-e0ff : motherboard
e400-e47f : motherboard
e480-e4ff : motherboard
e800-e87f : motherboard
e880-e8ff : motherboard
ec00-ec7f : motherboard
ec80-ecff : motherboard
ee00-ee7f : 0000:00:1f.0
ee00-ee7f : motherboard
ee00-ee03 : PM1a_EVT_BLK
ee04-ee05 : PM1a_CNT_BLK
ee08-ee0b : PM_TMR
ee10-ee15 : ACPI CPU throttle
ee20-ee20 : PM2_CNT_BLK
ee28-ee2b : GPE0_BLK
ee80-ee8f : motherboard
ee90-ee9f : motherboard
eeac-eeac : motherboard
eec0-eeff : 0000:00:1f.0
eec0-eeff : motherboard
/proc/iomem
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000cffff : Video ROM
000e0000-000eedff : reserved
000eee00-000eefff : ACPI Non-volatile Storage
000f0000-000fffff : System ROM
00100000-1ffeffff : System RAM
00100000-0033ac75 : Kernel code
0033ac76-00411d5f : Kernel data
1fff0000-1fffffff : ACPI Tables
20000000-200007ff : 0000:02:07.0
20000800-2000081f : 0000:02:0c.0
20000a00-20000bff : 0000:02:0d.0
20001000-20001fff : 0000:02:0b.0
20002000-20002fff : 0000:02:0b.1
20004000-20007fff : 0000:02:07.0
eff00000-f7ffffff : PCI Bus #01
eff80000-efffffff : 0000:01:00.0
f0000000-f7ffffff : 0000:01:00.0
f0000000-f1ffffff : vesafb
f8000000-fbffffff : 0000:00:00.0
fceff000-fcefffff : 0000:02:08.0
fceff000-fcefffff : eepro100
fd000000-fdffffff : PCI Bus #01
fd000000-fdffffff : 0000:01:00.0
feea0000-feebffff : reserved
ffb80000-ffbfffff : reserved
fff80000-ffffffff : reserved
no modules, and no scsi
Software Environment:
note: I am using UNPATCHED kernel sources directly from kernel.org, not patched
sources from gentoo's portage tree.
gcc version 3.3.5 (Gentoo Linux 3.3.5-r1, ssp-3.3.2-3, pie-8.7.7.1)
Problem Description:
Previous to my 2.6.11.6 upgrade I was running 2.6.9. With all unpatched 2.6
kernel versions up to and including 2.6.9, I could turn the lcd backlight off by
running "echo lcd_out:0 > /proc/acpi/toshiba/video" as root. I upgraded directly
from 2.6.9 to 2.6.11.6. With the upgrade I am no longer able to turn the lcd
backlight off. There is no effect after running "echo lcd_out:0 >
/proc/acpi/toshiba/video" and the /proc/acpi/toshiba/video lcd_out option
remains unchanged as 1. I recompiled the 2.6.11.6 kernel with the new option
CONFIG_BACKLIGHT_LCD_SUPPORT=y. Enabling this option did not allow the command
(echo lcd_out:0 > /proc/acpi/toshiba/video) to turn the lcd backlight off, or
change the lcd_out option to 0. However, I do get the following entry in my
kernel logs after running the command while running 2.6.11.6, "[kernel] video
bus notify". Previous to the upgrade, there was no entry in my kernel logs after
running the command.
Steps to reproduce:
build 2.6.11.6 with
CONFIG_TOSHIBA=y
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_INTERPRETER=y
# CONFIG_ACPI_SLEEP is not set
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_IBM is not set
CONFIG_ACPI_TOSHIBA=y
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_BUS=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
# CONFIG_X86_PM_TIMER is not set
# CONFIG_ACPI_CONTAINER is not set
note: enabling the CONFIG_BACKLIGHT_LCD_SUPPORT option does not change anything.
and run, echo lcd_out:0 > /proc/acpi/toshiba/video
------- You are receiving this mail because: -------
You are on the CC list for the bug, or are watching someone who is.
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
next reply other threads:[~2005-04-11 0:29 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-04-11 0:28 Andrew Morton [this message]
2005-04-11 19:10 ` Fw: [Bugme-new] [Bug 4468] New: Upgrade to 2.6.11.6 results in no longer being able to turn the lcd backlight off klug
2005-04-12 15:41 ` klug
2005-04-13 4:52 ` klug
2005-04-14 2:54 ` klug
2005-04-14 5:51 ` Antonino A. Daplas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20050410172843.6366ef8a.akpm@osdl.org \
--to=akpm@osdl.org \
--cc=klug@blarg.org \
--cc=linux-fbdev-devel@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).