* Locking fixes for powermac backlight infrastructure
@ 2006-07-08 12:06 Michael Hanselmann
0 siblings, 0 replies; only message in thread
From: Michael Hanselmann @ 2006-07-08 12:06 UTC (permalink / raw)
To: akpm; +Cc: benh, johannes, aris, linux-fbdev-devel, linux-kernel
This patch fixes locking issues in the new powermac backlight
infrastructure as reported by Aristeu S. Rozanski F. <aris@valeta.org>.
It also fixes the wrong calculation of backlight values in some of the
drivers.
Signed-off-by: Michael Hanselmann <linux-kernel@hansmi.ch>
Acked-by: René Nussbaumer <linux-kernel@killerfox.forkbomb.ch>
---
diff -Nrup --exclude-from linux-exclude-from linux-2.6.18-rc1.orig/drivers/video/aty/aty128fb.c linux-2.6.18-rc1/drivers/video/aty/aty128fb.c
--- linux-2.6.18-rc1.orig/drivers/video/aty/aty128fb.c 2006-07-08 12:27:09.000000000 +0200
+++ linux-2.6.18-rc1/drivers/video/aty/aty128fb.c 2006-07-08 12:28:32.000000000 +0200
@@ -456,6 +456,7 @@ static void do_wait_for_fifo(u16 entries
static void wait_for_fifo(u16 entries, struct aty128fb_par *par);
static void wait_for_idle(struct aty128fb_par *par);
static u32 depth_to_dst(u32 depth);
+static void aty128_bl_set_power(struct fb_info *info, int power);
#define BIOS_IN8(v) (readb(bios + (v)))
#define BIOS_IN16(v) (readb(bios + (v)) | \
@@ -1258,25 +1259,11 @@ static void aty128_set_lcd_enable(struct
reg &= ~LVDS_DISPLAY_DIS;
aty_st_le32(LVDS_GEN_CNTL, reg);
#ifdef CONFIG_FB_ATY128_BACKLIGHT
- mutex_lock(&info->bl_mutex);
- if (info->bl_dev) {
- down(&info->bl_dev->sem);
- info->bl_dev->props->update_status(info->bl_dev);
- up(&info->bl_dev->sem);
- }
- mutex_unlock(&info->bl_mutex);
+ aty128_bl_set_power(info, FB_BLANK_UNBLANK);
#endif
} else {
#ifdef CONFIG_FB_ATY128_BACKLIGHT
- mutex_lock(&info->bl_mutex);
- if (info->bl_dev) {
- down(&info->bl_dev->sem);
- info->bl_dev->props->brightness = 0;
- info->bl_dev->props->power = FB_BLANK_POWERDOWN;
- info->bl_dev->props->update_status(info->bl_dev);
- up(&info->bl_dev->sem);
- }
- mutex_unlock(&info->bl_mutex);
+ aty128_bl_set_power(info, FB_BLANK_POWERDOWN);
#endif
reg = aty_ld_le32(LVDS_GEN_CNTL);
reg |= LVDS_DISPLAY_DIS;
@@ -1703,6 +1690,7 @@ static int __devinit aty128fb_setup(char
static struct backlight_properties aty128_bl_data;
+/* Call with fb_info->bl_mutex held */
static int aty128_bl_get_level_brightness(struct aty128fb_par *par,
int level)
{
@@ -1710,10 +1698,8 @@ static int aty128_bl_get_level_brightnes
int atylevel;
/* Get and convert the value */
- mutex_lock(&info->bl_mutex);
atylevel = MAX_LEVEL -
(info->bl_curve[level] * FB_BACKLIGHT_MAX / MAX_LEVEL);
- mutex_unlock(&info->bl_mutex);
if (atylevel < 0)
atylevel = 0;
@@ -1731,7 +1717,8 @@ static int aty128_bl_get_level_brightnes
/* That one prevents proper CRT output with LCD off */
#undef BACKLIGHT_DAC_OFF
-static int aty128_bl_update_status(struct backlight_device *bd)
+/* Call with fb_info->bl_mutex held */
+static int __aty128_bl_update_status(struct backlight_device *bd)
{
struct aty128fb_par *par = class_get_devdata(&bd->class_dev);
unsigned int reg = aty_ld_le32(LVDS_GEN_CNTL);
@@ -1784,6 +1771,19 @@ static int aty128_bl_update_status(struc
return 0;
}
+static int aty128_bl_update_status(struct backlight_device *bd)
+{
+ struct aty128fb_par *par = class_get_devdata(&bd->class_dev);
+ struct fb_info *info = pci_get_drvdata(par->pdev);
+ int ret;
+
+ mutex_lock(&info->bl_mutex);
+ ret = __aty128_bl_update_status(bd);
+ mutex_unlock(&info->bl_mutex);
+
+ return ret;
+}
+
static int aty128_bl_get_brightness(struct backlight_device *bd)
{
return bd->props->brightness;
@@ -1796,6 +1796,16 @@ static struct backlight_properties aty12
.max_brightness = (FB_BACKLIGHT_LEVELS - 1),
};
+static void aty128_bl_set_power(struct fb_info *info, int power)
+{
+ mutex_lock(&info->bl_mutex);
+ up(&info->bl_dev->sem);
+ info->bl_dev->props->power = power;
+ __aty128_bl_update_status(info->bl_dev);
+ down(&info->bl_dev->sem);
+ mutex_unlock(&info->bl_mutex);
+}
+
static void aty128_bl_init(struct aty128fb_par *par)
{
struct fb_info *info = pci_get_drvdata(par->pdev);
@@ -2198,12 +2208,8 @@ static int aty128fb_blank(int blank, str
return 0;
#ifdef CONFIG_FB_ATY128_BACKLIGHT
- if (machine_is(powermac) && blank) {
- down(&fb->bl_dev->sem);
- fb->bl_dev->props->power = FB_BLANK_POWERDOWN;
- fb->bl_dev->props->update_status(fb->bl_dev);
- up(&fb->bl_dev->sem);
- }
+ if (machine_is(powermac) && blank)
+ aty128_bl_set_power(fb, FB_BLANK_POWERDOWN);
#endif
if (blank & FB_BLANK_VSYNC_SUSPEND)
@@ -2219,14 +2225,12 @@ static int aty128fb_blank(int blank, str
aty128_set_crt_enable(par, par->crt_on && !blank);
aty128_set_lcd_enable(par, par->lcd_on && !blank);
}
+
#ifdef CONFIG_FB_ATY128_BACKLIGHT
- if (machine_is(powermac) && !blank) {
- down(&fb->bl_dev->sem);
- fb->bl_dev->props->power = FB_BLANK_UNBLANK;
- fb->bl_dev->props->update_status(fb->bl_dev);
- up(&fb->bl_dev->sem);
- }
+ if (machine_is(powermac) && !blank)
+ aty128_bl_set_power(fb, FB_BLANK_UNBLANK);
#endif
+
return 0;
}
diff -Nrup --exclude-from linux-exclude-from linux-2.6.18-rc1.orig/drivers/video/aty/atyfb_base.c linux-2.6.18-rc1/drivers/video/aty/atyfb_base.c
--- linux-2.6.18-rc1.orig/drivers/video/aty/atyfb_base.c 2006-07-08 12:27:09.000000000 +0200
+++ linux-2.6.18-rc1/drivers/video/aty/atyfb_base.c 2006-07-08 12:28:32.000000000 +0200
@@ -2129,15 +2129,14 @@ static int atyfb_pci_resume(struct pci_d
static struct backlight_properties aty_bl_data;
+/* Call with fb_info->bl_mutex held */
static int aty_bl_get_level_brightness(struct atyfb_par *par, int level)
{
struct fb_info *info = pci_get_drvdata(par->pdev);
int atylevel;
/* Get and convert the value */
- mutex_lock(&info->bl_mutex);
atylevel = info->bl_curve[level] * FB_BACKLIGHT_MAX / MAX_LEVEL;
- mutex_unlock(&info->bl_mutex);
if (atylevel < 0)
atylevel = 0;
@@ -2147,7 +2146,8 @@ static int aty_bl_get_level_brightness(s
return atylevel;
}
-static int aty_bl_update_status(struct backlight_device *bd)
+/* Call with fb_info->bl_mutex held */
+static int __aty_bl_update_status(struct backlight_device *bd)
{
struct atyfb_par *par = class_get_devdata(&bd->class_dev);
unsigned int reg = aty_ld_lcd(LCD_MISC_CNTL, par);
@@ -2172,6 +2172,19 @@ static int aty_bl_update_status(struct b
return 0;
}
+static int aty_bl_update_status(struct backlight_device *bd)
+{
+ struct atyfb_par *par = class_get_devdata(&bd->class_dev);
+ struct fb_info *info = pci_get_drvdata(par->pdev);
+ int ret;
+
+ mutex_lock(&info->bl_mutex);
+ ret = __aty_bl_update_status(bd);
+ mutex_unlock(&info->bl_mutex);
+
+ return ret;
+}
+
static int aty_bl_get_brightness(struct backlight_device *bd)
{
return bd->props->brightness;
@@ -2184,6 +2197,16 @@ static struct backlight_properties aty_b
.max_brightness = (FB_BACKLIGHT_LEVELS - 1),
};
+static void aty_bl_set_power(struct fb_info *info, int power)
+{
+ mutex_lock(&info->bl_mutex);
+ up(&info->bl_dev->sem);
+ info->bl_dev->props->power = power;
+ __aty_bl_update_status(info->bl_dev);
+ down(&info->bl_dev->sem);
+ mutex_unlock(&info->bl_mutex);
+}
+
static void aty_bl_init(struct atyfb_par *par)
{
struct fb_info *info = pci_get_drvdata(par->pdev);
@@ -2790,16 +2813,8 @@ static int atyfb_blank(int blank, struct
return 0;
#ifdef CONFIG_PMAC_BACKLIGHT
- if (machine_is(powermac) && blank > FB_BLANK_NORMAL) {
- mutex_lock(&info->bl_mutex);
- if (info->bl_dev) {
- down(&info->bl_dev->sem);
- info->bl_dev->props->power = FB_BLANK_POWERDOWN;
- info->bl_dev->props->update_status(info->bl_dev);
- up(&info->bl_dev->sem);
- }
- mutex_unlock(&info->bl_mutex);
- }
+ if (machine_is(powermac) && blank > FB_BLANK_NORMAL)
+ aty_bl_set_power(info, FB_BLANK_POWERDOWN);
#elif defined(CONFIG_FB_ATY_GENERIC_LCD)
if (par->lcd_table && blank > FB_BLANK_NORMAL &&
(aty_ld_lcd(LCD_GEN_CNTL, par) & LCD_ON)) {
@@ -2830,16 +2845,8 @@ static int atyfb_blank(int blank, struct
aty_st_le32(CRTC_GEN_CNTL, gen_cntl, par);
#ifdef CONFIG_PMAC_BACKLIGHT
- if (machine_is(powermac) && blank <= FB_BLANK_NORMAL) {
- mutex_lock(&info->bl_mutex);
- if (info->bl_dev) {
- down(&info->bl_dev->sem);
- info->bl_dev->props->power = FB_BLANK_UNBLANK;
- info->bl_dev->props->update_status(info->bl_dev);
- up(&info->bl_dev->sem);
- }
- mutex_unlock(&info->bl_mutex);
- }
+ if (machine_is(powermac) && blank <= FB_BLANK_NORMAL)
+ aty_bl_set_power(info, FB_BLANK_UNBLANK);
#elif defined(CONFIG_FB_ATY_GENERIC_LCD)
if (par->lcd_table && blank <= FB_BLANK_NORMAL &&
(aty_ld_lcd(LCD_GEN_CNTL, par) & LCD_ON)) {
diff -Nrup --exclude-from linux-exclude-from linux-2.6.18-rc1.orig/drivers/video/chipsfb.c linux-2.6.18-rc1/drivers/video/chipsfb.c
--- linux-2.6.18-rc1.orig/drivers/video/chipsfb.c 2006-07-08 12:27:08.000000000 +0200
+++ linux-2.6.18-rc1/drivers/video/chipsfb.c 2006-07-08 12:28:32.000000000 +0200
@@ -150,12 +150,11 @@ static int chipsfb_blank(int blank, stru
mutex_lock(&pmac_backlight_mutex);
if (pmac_backlight) {
- down(&pmac_backlight->sem);
-
/* used to disable backlight only for blank > 1, but it seems
* useful at blank = 1 too (saves battery, extends backlight
* life)
*/
+ down(&pmac_backlight->sem);
if (blank)
pmac_backlight->props->power = FB_BLANK_POWERDOWN;
else
diff -Nrup --exclude-from linux-exclude-from linux-2.6.18-rc1.orig/drivers/video/nvidia/nv_backlight.c linux-2.6.18-rc1/drivers/video/nvidia/nv_backlight.c
--- linux-2.6.18-rc1.orig/drivers/video/nvidia/nv_backlight.c 2006-07-08 12:27:09.000000000 +0200
+++ linux-2.6.18-rc1/drivers/video/nvidia/nv_backlight.c 2006-07-08 12:28:32.000000000 +0200
@@ -26,9 +26,11 @@
*/
#define MIN_LEVEL 0x158
#define MAX_LEVEL 0x534
+#define LEVEL_STEP ((MAX_LEVEL - MIN_LEVEL) / FB_BACKLIGHT_MAX)
static struct backlight_properties nvidia_bl_data;
+/* Call with fb_info->bl_mutex held */
static int nvidia_bl_get_level_brightness(struct nvidia_par *par,
int level)
{
@@ -36,9 +38,7 @@ static int nvidia_bl_get_level_brightnes
int nlevel;
/* Get and convert the value */
- mutex_lock(&info->bl_mutex);
- nlevel = info->bl_curve[level] * FB_BACKLIGHT_MAX / MAX_LEVEL;
- mutex_unlock(&info->bl_mutex);
+ nlevel = MIN_LEVEL + info->bl_curve[level] * LEVEL_STEP;
if (nlevel < 0)
nlevel = 0;
@@ -50,7 +50,8 @@ static int nvidia_bl_get_level_brightnes
return nlevel;
}
-static int nvidia_bl_update_status(struct backlight_device *bd)
+/* Call with fb_info->bl_mutex held */
+static int __nvidia_bl_update_status(struct backlight_device *bd)
{
struct nvidia_par *par = class_get_devdata(&bd->class_dev);
u32 tmp_pcrt, tmp_pmc, fpcontrol;
@@ -84,6 +85,19 @@ static int nvidia_bl_update_status(struc
return 0;
}
+static int nvidia_bl_update_status(struct backlight_device *bd)
+{
+ struct nvidia_par *par = class_get_devdata(&bd->class_dev);
+ struct fb_info *info = pci_get_drvdata(par->pci_dev);
+ int ret;
+
+ mutex_lock(&info->bl_mutex);
+ ret = __nvidia_bl_update_status(bd);
+ mutex_unlock(&info->bl_mutex);
+
+ return ret;
+}
+
static int nvidia_bl_get_brightness(struct backlight_device *bd)
{
return bd->props->brightness;
@@ -96,6 +110,16 @@ static struct backlight_properties nvidi
.max_brightness = (FB_BACKLIGHT_LEVELS - 1),
};
+void nvidia_bl_set_power(struct fb_info *info, int power)
+{
+ mutex_lock(&info->bl_mutex);
+ up(&info->bl_dev->sem);
+ info->bl_dev->props->power = power;
+ __nvidia_bl_update_status(info->bl_dev);
+ down(&info->bl_dev->sem);
+ mutex_unlock(&info->bl_mutex);
+}
+
void nvidia_bl_init(struct nvidia_par *par)
{
struct fb_info *info = pci_get_drvdata(par->pci_dev);
diff -Nrup --exclude-from linux-exclude-from linux-2.6.18-rc1.orig/drivers/video/nvidia/nvidia.c linux-2.6.18-rc1/drivers/video/nvidia/nvidia.c
--- linux-2.6.18-rc1.orig/drivers/video/nvidia/nvidia.c 2006-07-08 12:27:09.000000000 +0200
+++ linux-2.6.18-rc1/drivers/video/nvidia/nvidia.c 2006-07-08 12:28:32.000000000 +0200
@@ -933,16 +933,7 @@ static int nvidiafb_blank(int blank, str
NVWriteSeq(par, 0x01, tmp);
NVWriteCrtc(par, 0x1a, vesa);
-#ifdef CONFIG_FB_NVIDIA_BACKLIGHT
- mutex_lock(&info->bl_mutex);
- if (info->bl_dev) {
- down(&info->bl_dev->sem);
- info->bl_dev->props->power = blank;
- info->bl_dev->props->update_status(info->bl_dev);
- up(&info->bl_dev->sem);
- }
- mutex_unlock(&info->bl_mutex);
-#endif
+ nvidia_bl_set_power(info, blank);
NVTRACE_LEAVE();
diff -Nrup --exclude-from linux-exclude-from linux-2.6.18-rc1.orig/drivers/video/nvidia/nv_proto.h linux-2.6.18-rc1/drivers/video/nvidia/nv_proto.h
--- linux-2.6.18-rc1.orig/drivers/video/nvidia/nv_proto.h 2006-07-08 12:27:09.000000000 +0200
+++ linux-2.6.18-rc1/drivers/video/nvidia/nv_proto.h 2006-07-08 12:28:32.000000000 +0200
@@ -68,9 +68,11 @@ extern u8 byte_rev[256];
#ifdef CONFIG_FB_NVIDIA_BACKLIGHT
extern void nvidia_bl_init(struct nvidia_par *par);
extern void nvidia_bl_exit(struct nvidia_par *par);
+extern void nvidia_bl_set_power(struct fb_info *info, int power);
#else
static inline void nvidia_bl_init(struct nvidia_par *par) {}
static inline void nvidia_bl_exit(struct nvidia_par *par) {}
+static inline void nvidia_bl_set_power(struct fb_info *info, int power) {}
#endif
#endif /* __NV_PROTO_H__ */
diff -Nrup --exclude-from linux-exclude-from linux-2.6.18-rc1.orig/drivers/video/riva/fbdev.c linux-2.6.18-rc1/drivers/video/riva/fbdev.c
--- linux-2.6.18-rc1.orig/drivers/video/riva/fbdev.c 2006-07-08 12:27:08.000000000 +0200
+++ linux-2.6.18-rc1/drivers/video/riva/fbdev.c 2006-07-08 12:28:32.000000000 +0200
@@ -278,9 +278,11 @@ static const struct riva_regs reg_templa
*/
#define MIN_LEVEL 0x158
#define MAX_LEVEL 0x534
+#define LEVEL_STEP ((MAX_LEVEL - MIN_LEVEL) / FB_BACKLIGHT_MAX)
static struct backlight_properties riva_bl_data;
+/* Call with fb_info->bl_mutex held */
static int riva_bl_get_level_brightness(struct riva_par *par,
int level)
{
@@ -288,9 +290,7 @@ static int riva_bl_get_level_brightness(
int nlevel;
/* Get and convert the value */
- mutex_lock(&info->bl_mutex);
- nlevel = info->bl_curve[level] * FB_BACKLIGHT_MAX / MAX_LEVEL;
- mutex_unlock(&info->bl_mutex);
+ nlevel = MIN_LEVEL + info->bl_curve[level] * LEVEL_STEP;
if (nlevel < 0)
nlevel = 0;
@@ -302,7 +302,8 @@ static int riva_bl_get_level_brightness(
return nlevel;
}
-static int riva_bl_update_status(struct backlight_device *bd)
+/* Call with fb_info->bl_mutex held */
+static int __riva_bl_update_status(struct backlight_device *bd)
{
struct riva_par *par = class_get_devdata(&bd->class_dev);
U032 tmp_pcrt, tmp_pmc;
@@ -327,6 +328,19 @@ static int riva_bl_update_status(struct
return 0;
}
+static int riva_bl_update_status(struct backlight_device *bd)
+{
+ struct riva_par *par = class_get_devdata(&bd->class_dev);
+ struct fb_info *info = pci_get_drvdata(par->pdev);
+ int ret;
+
+ mutex_lock(&info->bl_mutex);
+ ret = __riva_bl_update_status(bd);
+ mutex_unlock(&info->bl_mutex);
+
+ return ret;
+}
+
static int riva_bl_get_brightness(struct backlight_device *bd)
{
return bd->props->brightness;
@@ -339,6 +353,16 @@ static struct backlight_properties riva_
.max_brightness = (FB_BACKLIGHT_LEVELS - 1),
};
+static void riva_bl_set_power(struct fb_info *info, int power)
+{
+ mutex_lock(&info->bl_mutex);
+ up(&info->bl_dev->sem);
+ info->bl_dev->props->power = power;
+ __riva_bl_update_status(info->bl_dev);
+ down(&info->bl_dev->sem);
+ mutex_unlock(&info->bl_mutex);
+}
+
static void riva_bl_init(struct riva_par *par)
{
struct fb_info *info = pci_get_drvdata(par->pdev);
@@ -419,6 +443,7 @@ static void riva_bl_exit(struct riva_par
#else
static inline void riva_bl_init(struct riva_par *par) {}
static inline void riva_bl_exit(struct riva_par *par) {}
+static inline void riva_bl_set_power(struct fb_info *info, int power) {}
#endif /* CONFIG_FB_RIVA_BACKLIGHT */
/* ------------------------------------------------------------------------- *
@@ -1337,16 +1362,7 @@ static int rivafb_blank(int blank, struc
SEQout(par, 0x01, tmp);
CRTCout(par, 0x1a, vesa);
-#ifdef CONFIG_FB_RIVA_BACKLIGHT
- mutex_lock(&info->bl_mutex);
- if (info->bl_dev) {
- down(&info->bl_dev->sem);
- info->bl_dev->props->power = blank;
- info->bl_dev->props->update_status(info->bl_dev);
- up(&info->bl_dev->sem);
- }
- mutex_unlock(&info->bl_mutex);
-#endif
+ riva_bl_set_power(info, blank);
NVTRACE_LEAVE();
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
Linux-fbdev-devel mailing list
Linux-fbdev-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-fbdev-devel
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2006-07-08 12:06 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-07-08 12:06 Locking fixes for powermac backlight infrastructure Michael Hanselmann
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).