* Re: 2.6.18-rc6-mm1 [not found] ` <20060909090449.GA16579@amd64.of.nowhere> @ 2006-09-09 15:31 ` Andrew Morton 2006-09-09 22:02 ` 2.6.18-rc6-mm1 Jean Delvare 0 siblings, 1 reply; 3+ messages in thread From: Andrew Morton @ 2006-09-09 15:31 UTC (permalink / raw) To: Jurriaan Cc: Jean Delvare, Antonino A. Daplas, linux-fbdev-devel, linux-kernel On Sat, 9 Sep 2006 11:04:49 +0200 thunder7@xs4all.nl wrote: > From: Andrew Morton <akpm@osdl.org> > Date: Fri, Sep 08, 2006 at 12:44:11PM -0700 > > On Fri, 8 Sep 2006 21:30:41 +0200 > > thunder7@xs4all.nl wrote: > > > > > From: Andrew Morton <akpm@osdl.org> > > > Date: Fri, Sep 08, 2006 at 01:13:17AM -0700 > > > > > > > > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.18-rc6/2.6.18-rc6-mm1/ > > > > > > > This throws an oops on my IBM Thinkpad T23 notebook. Some parts scroll > > > off the screen, but the visible stack trace goes like this: > > > > > We'd really need to see that trace, please. netconsole is worth setting > > up, if you have another machine on the LAN. > > > Well, I've learned that built-in framebuffers initialize _before_ the > network stack is up, so that didn't help. Rebuilding savagefb as a > module gave me: > > hub 3-0:1.0: 2 ports detected > savagefb: mapped io at f8980000 > savagefb: probed videoram: 16384k > savagefb: Detected current MCLK value of 71591 kHz > savagefb: 1024x768 TFT LCD panel detected and active > savagefb: Limiting video mode to 1024x768 > savagefb: mapped framebuffer at f8a80000, pbase == e8000000 > BUG: unable to handle kernel NULL pointer dereference at virtual address > 00000000 > printing eip: > f8831013 > *pde = 00000000 > Oops: 0000 [#1] > 4K_STACKS PREEMPT > last sysfs file: /devices/system/cpu/cpu0/cpufreq/scaling_governor > Modules linked in: savagefb fb_ddc cfbimgblt uhci_hcd usbcore > CPU: 0 > EIP: 0060:[<f8831013>] Not tainted VLI > EFLAGS: 00010286 (2.6.18-rc6-mm1 #6) > EIP is at fb_ddc_read+0x13/0x1c4 [fb_ddc] > eax: f7faf250 ebx: 00000000 ecx: f7faf244 edx: f7faf244 > esi: 00000000 edi: f7faf008 ebp: f7fbed98 esp: f7fbed68 > ds: 007b es: 007b ss: 0068 > Process modprobe (pid: 1776, ti=f7fbe000 task=f7fbdab0 > task.ti=f7fbe000) > Stack: 00000001 f7faf244 00004988 01000000 f7faf000 f9a6d9e0 f7fbede8 00000000 > f7faf244 f7faf208 f7faf000 f7faf008 f7fbedb0 f8846af9 f7faf250 f7faf208 > f7faf000 f7faf008 f7fbede8 f884667c f7faf000 f7faf6b0 f7fbedd0 c01ebe91 > Call Trace: > [<c01039eb>] show_trace_log_lvl+0x15/0x28 > [<c0103a8a>] show_stack_log_lvl+0x8c/0x97 > [<c0103e48>] show_registers+0x188/0x21c > [<c0104085>] die+0x1a9/0x283 > [<c0113bb5>] do_page_fault+0x3ed/0x4bf > [<c03421df>] error_code+0x3f/0x44 > [<f8846af9>] savagefb_probe_i2c_connector+0x18/0x66 [savagefb] > [<f884667c>] savagefb_probe+0x484/0x672 [savagefb] > [<c01f6722>] pci_device_probe+0x3a/0x61 > [<c0269ecb>] really_probe+0x37/0xb0 > [<c0269fbc>] driver_probe_device+0x78/0x84 > [<c026a06a>] __driver_attach+0x38/0x60 > [<c026992a>] bus_for_each_dev+0x42/0x69 > [<c0269df7>] driver_attach+0x16/0x18 > [<c0269491>] bus_add_driver+0x66/0x179 > [<c026a2f7>] driver_register+0x77/0x7c > [<c01f68bf>] __pci_register_driver+0x5e/0x7e > [<f882d02e>] savagefb_init+0x2e/0x36 [savagefb] > [<c0132158>] sys_init_module+0x1274/0x1443 > [<c0102dd8>] syscall_call+0x7/0xb > ======================= > Code: <ff> 33 ff 53 08 6a 00 ff 33 ff 53 08 c7 45 d4 00 00 00 00 83 c4 10 6a 00 31 ff ff 33 ff 53 04 6a > EIP: [<f8831013>] fb_ddc_read+0x13/0x1c4 [fb_ddc] SS:ESP 0068:f7fbed68 > > Hope this helps, Does, thanks. I guess adapter->algo_data is NULL. savagefb-use-generic-ddc-reading.patch, perhaps... ------------------------------------------------------------------------- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 ^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: 2.6.18-rc6-mm1 2006-09-09 15:31 ` 2.6.18-rc6-mm1 Andrew Morton @ 2006-09-09 22:02 ` Jean Delvare 2006-09-10 6:30 ` 2.6.18-rc6-mm1 thunder7 0 siblings, 1 reply; 3+ messages in thread From: Jean Delvare @ 2006-09-09 22:02 UTC (permalink / raw) To: Andrew Morton Cc: Jurriaan, linux-kernel, linux-fbdev-devel, Antonino A. Daplas Hi Andrew, Jurriaan, Antonino, > > > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.18-rc6/2.6.18-rc6-mm1/ > > > > This throws an oops on my IBM Thinkpad T23 notebook. Some parts scroll > > off the screen, but the visible stack trace goes like this: > > (...) > > hub 3-0:1.0: 2 ports detected > > savagefb: mapped io at f8980000 > > savagefb: probed videoram: 16384k > > savagefb: Detected current MCLK value of 71591 kHz > > savagefb: 1024x768 TFT LCD panel detected and active > > savagefb: Limiting video mode to 1024x768 > > savagefb: mapped framebuffer at f8a80000, pbase == e8000000 > > BUG: unable to handle kernel NULL pointer dereference at virtual address > > 00000000 > > printing eip: > > f8831013 > > *pde = 00000000 > > Oops: 0000 [#1] > > 4K_STACKS PREEMPT > > last sysfs file: /devices/system/cpu/cpu0/cpufreq/scaling_governor > > Modules linked in: savagefb fb_ddc cfbimgblt uhci_hcd usbcore > > CPU: 0 > > EIP: 0060:[<f8831013>] Not tainted VLI > > EFLAGS: 00010286 (2.6.18-rc6-mm1 #6) > > EIP is at fb_ddc_read+0x13/0x1c4 [fb_ddc] > > eax: f7faf250 ebx: 00000000 ecx: f7faf244 edx: f7faf244 > > esi: 00000000 edi: f7faf008 ebp: f7fbed98 esp: f7fbed68 > > ds: 007b es: 007b ss: 0068 > > Process modprobe (pid: 1776, ti=f7fbe000 task=f7fbdab0 > > task.ti=f7fbe000) > > Stack: 00000001 f7faf244 00004988 01000000 f7faf000 f9a6d9e0 f7fbede8 00000000 > > f7faf244 f7faf208 f7faf000 f7faf008 f7fbedb0 f8846af9 f7faf250 f7faf208 > > f7faf000 f7faf008 f7fbede8 f884667c f7faf000 f7faf6b0 f7fbedd0 c01ebe91 > > Call Trace: > > [<c01039eb>] show_trace_log_lvl+0x15/0x28 > > [<c0103a8a>] show_stack_log_lvl+0x8c/0x97 > > [<c0103e48>] show_registers+0x188/0x21c > > [<c0104085>] die+0x1a9/0x283 > > [<c0113bb5>] do_page_fault+0x3ed/0x4bf > > [<c03421df>] error_code+0x3f/0x44 > > [<f8846af9>] savagefb_probe_i2c_connector+0x18/0x66 [savagefb] > > [<f884667c>] savagefb_probe+0x484/0x672 [savagefb] > > [<c01f6722>] pci_device_probe+0x3a/0x61 > > [<c0269ecb>] really_probe+0x37/0xb0 > > [<c0269fbc>] driver_probe_device+0x78/0x84 > > [<c026a06a>] __driver_attach+0x38/0x60 > > [<c026992a>] bus_for_each_dev+0x42/0x69 > > [<c0269df7>] driver_attach+0x16/0x18 > > [<c0269491>] bus_add_driver+0x66/0x179 > > [<c026a2f7>] driver_register+0x77/0x7c > > [<c01f68bf>] __pci_register_driver+0x5e/0x7e > > [<f882d02e>] savagefb_init+0x2e/0x36 [savagefb] > > [<c0132158>] sys_init_module+0x1274/0x1443 > > [<c0102dd8>] syscall_call+0x7/0xb > > ======================= > > Code: <ff> 33 ff 53 08 6a 00 ff 33 ff 53 08 c7 45 d4 00 00 00 00 83 c4 10 6a 00 31 ff ff 33 ff 53 04 6a > > EIP: [<f8831013>] fb_ddc_read+0x13/0x1c4 [fb_ddc] SS:ESP 0068:f7fbed68 > > > > Hope this helps, > > Does, thanks. I guess adapter->algo_data is NULL. > > savagefb-use-generic-ddc-reading.patch, perhaps... I indeed think this patch is causing the oops. The old code did call savage_do_probe_i2c_edid even if no i2c bus had been created for the board, and savage_do_probe_i2c_edid bailed out quickly in that case ("chan->par = NULL;" at the end of savage_setup_i2c_bus, and "if (chan->par) {" at the beginning of savage_do_probe_i2c_edid.) The new fb_ddc_read function has no such quick exit, it pretty much assumes that an i2c bus was successfully created beforehand. So my guess is that Jurriaan's graphics adapter is supported by the savagefb driver, but the driver doesn't create an i2c bus for it (either because the hardware doesn't have it, or we simply have no support.) Jurriaan, please confirm that your adapter is not one of Savage4, Savage2000, ProSavagePM, ProSavage8. If my analysis is correct, the following patch should fix the problem. It can probably be optimized/cleaned up, but I'll leave that to Antonino. Jurriaan, can you please apply this patch on top of 2.6.18-rc6-mm1 and report success or failure? * * * * * Hot fix to savagefb-use-generic-ddc-reading.patch. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> --- drivers/video/savage/savagefb-i2c.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) --- linux-2.6.18-rc6-mm1.orig/drivers/video/savage/savagefb-i2c.c 2006-09-09 23:21:24.000000000 +0200 +++ linux-2.6.18-rc6-mm1/drivers/video/savage/savagefb-i2c.c 2006-09-09 23:52:56.000000000 +0200 @@ -218,7 +218,10 @@ struct savagefb_par *par = info->par; u8 *edid; - edid = fb_ddc_read(&par->chan.adapter); + if (par->chan.par) + edid = fb_ddc_read(&par->chan.adapter); + else + edid = NULL; if (!edid) { /* try to get from firmware */ -- Jean Delvare ^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: 2.6.18-rc6-mm1 2006-09-09 22:02 ` 2.6.18-rc6-mm1 Jean Delvare @ 2006-09-10 6:30 ` thunder7 0 siblings, 0 replies; 3+ messages in thread From: thunder7 @ 2006-09-10 6:30 UTC (permalink / raw) To: Jean Delvare Cc: Andrew Morton, Antonino A. Daplas, linux-fbdev-devel, Jurriaan, linux-kernel From: Jean Delvare <khali@linux-fr.org> Date: Sun, Sep 10, 2006 at 12:02:45AM +0200 > Hi Andrew, Jurriaan, Antonino, > > So my guess is that Jurriaan's graphics adapter is supported by the > savagefb driver, but the driver doesn't create an i2c bus for it > (either because the hardware doesn't have it, or we simply have no > support.) Jurriaan, please confirm that your adapter is not one of > Savage4, Savage2000, ProSavagePM, ProSavage8. lspci calls it 'S3 Inc. SuperSavage IX/C SDR (rev 05)' > > If my analysis is correct, the following patch should fix the problem. > It can probably be optimized/cleaned up, but I'll leave that to > Antonino. Jurriaan, can you please apply this patch on top of > 2.6.18-rc6-mm1 and report success or failure? This patch fixes my problems, rc6-mm1 boots without problems even with the savagefb driver builtin. Thanks, Jurriaan -- Genius untempered by ethics is a deadly commodity. Iain Irvine - A Shadow on the Glass Debian (Unstable) GNU/Linux 2.6.18-rc4-mm3 4423 bogomips load 0.04 ------------------------------------------------------------------------- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 ^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2006-09-10 6:31 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <20060908011317.6cb0495a.akpm@osdl.org>
[not found] ` <20060908193041.GA18966@amd64.of.nowhere>
[not found] ` <20060908124411.aa96fb7b.akpm@osdl.org>
[not found] ` <20060909090449.GA16579@amd64.of.nowhere>
2006-09-09 15:31 ` 2.6.18-rc6-mm1 Andrew Morton
2006-09-09 22:02 ` 2.6.18-rc6-mm1 Jean Delvare
2006-09-10 6:30 ` 2.6.18-rc6-mm1 thunder7
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).